kopia lustrzana https://gitlab.com/sane-project/backends
168 wiersze
4.3 KiB
Groff
168 wiersze
4.3 KiB
Groff
.TH sane-teco2 5 "19 March 2002" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
|
|
.IX sane-teco2
|
|
.SH NAME
|
|
sane-teco2 \- SANE backend for TECO / RELISYS scanners
|
|
.SH DESCRIPTION
|
|
The
|
|
.B sane-teco2
|
|
library implements a SANE (Scanner Access Now Easy) backend that
|
|
provides access to some TECO SCSI flatbed scanners. This backend
|
|
should be considered
|
|
.B alpha-quality
|
|
software! TECO scanners are sold under
|
|
various brands like Relisys, Piotech, TRUST. This backend may or
|
|
may not support yours.
|
|
.PP
|
|
The scanners that should work with this backend are:
|
|
.PP
|
|
.RS
|
|
Vendor Model TECO model status
|
|
.br
|
|
---------------------- -------------- -----------
|
|
.br
|
|
Relisys Scorpio Super 3 VM3575 tested
|
|
Apollo Express 6 VM656A tested
|
|
Scorpio Pro-S VM6586 tested
|
|
|
|
.RE
|
|
|
|
Note that the untested scanner will not be directly supported. You
|
|
should contact the author for that.
|
|
|
|
The TECO VM number can usually be found at the back of the
|
|
scanner. It is also part of the FCC ID.
|
|
|
|
The options the backend supports can either be selected through
|
|
command line options to programs like scanimage or through GUI
|
|
elements in xscanimage or xsane.
|
|
|
|
.br
|
|
If you have any success with a scanner not listed here, or if you have
|
|
any strange behavior, please report to the backend maintainer or to
|
|
the SANE mailing list.
|
|
|
|
Valid command line options and their syntax can be listed by using
|
|
.RS
|
|
scanimage --help -d teco2
|
|
.RE
|
|
|
|
.TP
|
|
.B Scan Mode
|
|
|
|
.TP
|
|
.B --mode
|
|
selects the basic mode of operation of the scanner valid choices are
|
|
.I Black & White
|
|
,
|
|
.I Grayscale
|
|
and
|
|
.I Color
|
|
The Black & White mode is black and white only (1 bit). Grayscale
|
|
will produce 256 levels of gray (8 bits). Color will produce a 24 bits
|
|
color image.
|
|
|
|
.TP
|
|
.B --resolution
|
|
selects the resolution for a scan. The scanner can do all resolutions
|
|
between 1 and 600, in increments of 1.
|
|
|
|
|
|
.TP
|
|
.B Geometry options
|
|
|
|
.TP
|
|
.B -l -t -x -y
|
|
control the scan area: -l sets the top left x coordinate, -t the top
|
|
left y coordinate, -x selects the width and -y the height of the scan
|
|
area. All parameters are specified in millimeters by default.
|
|
|
|
|
|
.TP
|
|
.B Enhancement options
|
|
|
|
.TP
|
|
.B --custom-gamma
|
|
(color mode only) allows the user to specify a gamma table (see the
|
|
next 3 parameters).
|
|
|
|
.TP
|
|
.B --red-gamma-table
|
|
(color mode only) can be used to download a user defined
|
|
gamma table for the red channel. The table must be 256 bytes long.
|
|
|
|
.TP
|
|
.B --green-gamma-table
|
|
(color mode only) can be used to download a user defined
|
|
gamma table for the green channel. The table must be 256 bytes long.
|
|
|
|
.TP
|
|
.B --blue-gamma-table
|
|
(color mode only) can be used to download a user defined gamma table
|
|
for the blue channel. The table must be 256 bytes long.
|
|
|
|
|
|
.TP
|
|
.B --preview
|
|
requests a preview scan. The resolution used for that scan is 22 dpi
|
|
and the scan area is the maximum allowed. The scan mode is user
|
|
selected. The default is "no".
|
|
|
|
|
|
.SH CONFIGURATION FILE
|
|
The configuration file @CONFIGDIR@/teco2.conf supports only one information: the device name to use (eg /dev/scanner).
|
|
|
|
|
|
.SH FILES
|
|
.TP
|
|
.I @LIBDIR@/libsane-teco2.a
|
|
The static library implementing this backend.
|
|
.TP
|
|
.I @LIBDIR@/libsane-teco2.so
|
|
The shared library implementing this backend (present on systems that
|
|
support dynamic loading).
|
|
|
|
|
|
.SH ENVIRONMENT
|
|
.TP
|
|
.B SANE_DEBUG_TECO2
|
|
If the library was compiled with debug support enabled, this
|
|
environment variable controls the debug level for this backend. E.g.,
|
|
a value of 128 requests all debug output to be printed. Smaller levels
|
|
reduce verbosity.
|
|
|
|
|
|
.SH LIMITATIONS
|
|
The windows TWAIN driver has many more options than this SANE
|
|
backend. However they are only software adjustments. This backend only
|
|
implements what the scanner can support.
|
|
|
|
|
|
.SH BUGS
|
|
|
|
Plenty. Parts of this backend are still under development.
|
|
|
|
|
|
.SH "SEE ALSO"
|
|
|
|
sane\-scsi(5), scanimage(1), xscanimage(1), xsane(1), sane(7)
|
|
|
|
|
|
.SH AUTHOR
|
|
|
|
The package is actively maintained by Frank Zago.
|
|
http://fz.eryx.net/sane/#teco2
|
|
|
|
.SH CREDITS
|
|
|
|
Thanks to:
|
|
.TP
|
|
Gerard Klaver for his relentless VM3575 testings.
|
|
.TP
|
|
Mark Plowman for providing the first SCSI traces from a VM3575.
|
|
.TP
|
|
Andreas Klaedtke for providing the first SCSI traces from a VM6586 and for his testing, and to Stefan von Dombrowski for his testing.
|
|
.TP
|
|
Nicolas Peyresaubes for providing the first SCSI traces from a VM656A and for his testing.
|
|
.TP
|
|
Dave Parker for testing the support for the VM6575.
|