kopia lustrzana https://gitlab.com/sane-project/backends
351 wiersze
13 KiB
Groff
351 wiersze
13 KiB
Groff
.TH sane-mustek 5 "31 Dec 2000"
|
|
.IX sane-mustek
|
|
.SH NAME
|
|
sane-mustek - SANE backend for Mustek flatbed scanners
|
|
.SH DESCRIPTION
|
|
The
|
|
.B sane-mustek
|
|
library implements a SANE (Scanner Access Now Easy) backend that
|
|
provides access to Mustek (and some relabeled Trust) flatbed scanners.
|
|
At present, the following scanners are known to work more or less with
|
|
this backend:
|
|
.PP
|
|
.RS
|
|
Paragon MFS-6000CX
|
|
.br
|
|
Paragon MFS-12000CX
|
|
.br
|
|
Paragon MFC-600S, 600 II CD, ScanMagic 600 II SP
|
|
.br
|
|
Paragon MFC-800S, 800 II SP
|
|
.br
|
|
Paragon MFS-6000SP
|
|
.br
|
|
Paragon MFS-8000SP
|
|
.br
|
|
Paragon MFS-1200SP, MFS-12000SP
|
|
.br
|
|
ScanExpress 6000SP
|
|
.br
|
|
ScanExpress 12000SP, 12000SP Plus, Paragon 1200 III SP, ScanMagic 9636S, 9636S Plus
|
|
.br
|
|
Paragon 1200 LS
|
|
.br
|
|
ScanExpress A3 SP
|
|
.br
|
|
Paragon 1200 SP Pro
|
|
.br
|
|
Paragon 1200 A3 Pro
|
|
.br
|
|
Paragon 600 II N
|
|
.br
|
|
Trust Imagery 1200 SP
|
|
.br
|
|
Trust Imagery 4800 SP
|
|
.br
|
|
Trust SCSI Connect 19200
|
|
.br
|
|
.RE
|
|
.PP
|
|
More details can be found on the Mustek backend homepage
|
|
.IR http://www.meier-geinitz.de/sane/.
|
|
.PP
|
|
Don't mix up MFS (Paragon), Pro and ScanExpress models! They're
|
|
completely different. Check the exact model name!
|
|
.PP
|
|
Note that most of the above scanners come with a SCSI interface. The
|
|
only non-SCSI scanner that has some support at this point is the 600
|
|
II N scanner which comes with its own parallel port adapter (i.e., it
|
|
does
|
|
.I not
|
|
attach to the printer port). More info on how to use the 600 II N can
|
|
be found below in section PARAGON 600 II N. Other parallel port
|
|
scanners are not supported by this backend but you may be successful
|
|
using the Mustek parallel port backend (mustek_pp). USB scanners are
|
|
not supported by this backend by now.
|
|
.PP
|
|
Mustek scanners have no protection against exceeding the physical scan
|
|
area height. That is, if a scan is attempted with a height that
|
|
exceeds the height of the scan surface, the scanner begins making loud
|
|
noises and the scan mechanism may be damaged. Thus, if you hear such
|
|
a noise, IMMEDIATELY turn off the scanner. This shouldn't happen if
|
|
your scanner is in the list of known scanners. There is more
|
|
information in the
|
|
.IR PROBLEMS
|
|
file.
|
|
.PP
|
|
If you own a Mustek (or Trust) scanner other than the ones listed
|
|
above that works with this backend, please let us know by sending the
|
|
scanner's exact model name (look at the front and back of the scanner)
|
|
and a debug output to
|
|
.IR sane\-devel@mostang.com .
|
|
You can get the debug output by setting the environment variable
|
|
SANE_DEBUG_MUSTEK to 5 and showing the list of available scanners with
|
|
scanimage \-L . Please send all of it to the mailing list.
|
|
|
|
.SH "DEVICE NAMES"
|
|
This backend expects device names of the form:
|
|
.PP
|
|
.RS
|
|
.I special
|
|
.RE
|
|
.PP
|
|
Where
|
|
.I special
|
|
is either the path-name for the special device that corresponds to a
|
|
SCSI scanner or the port number at which the 600 II N can
|
|
be found (see section PARAGON 600 II N below). For SCSI
|
|
scanners, the special device name must be a generic SCSI device or a
|
|
symlink to such a device. The program
|
|
.IR sane-find-scanner
|
|
helps to find out the correct device. Under Linux, such a device name
|
|
could be
|
|
.I /dev/sga
|
|
or
|
|
.IR /dev/sge ,
|
|
for example. See sane-scsi(5) for details.
|
|
.SH CONFIGURATION
|
|
The contents of the
|
|
.I mustek.conf
|
|
file is a list of options and device names that correspond to Mustek
|
|
scanners. Empty lines and lines starting with a hash mark (#) are
|
|
ignored. See sane-scsi(5) on details of what constitutes a valid
|
|
device name.
|
|
.PP
|
|
The supported options are
|
|
.BR linedistance-fix ,
|
|
.BR lineart-fix ,
|
|
.BR legal-size
|
|
.BR buffersize ,
|
|
.BR blocksize ,
|
|
.BR strip-height ,
|
|
and
|
|
.BR force-wait ,
|
|
|
|
Options come in two flavors: global and positional ones. Global
|
|
options apply to all devices managed by the backend whereas positional
|
|
options apply just to the most recently mentioned device. Note that
|
|
this means that the order in which the options appear matters!
|
|
|
|
Option
|
|
.B linedistance-fix
|
|
is positional and works around a problem that occurs with some SCSI
|
|
controllers (notably the ncr810 controller under Linux). If color
|
|
scans have horizontal stripes and/or the colors are off, then it's
|
|
likely that your controller suffers from this problem. Turning on
|
|
this option usually fixes the problem.
|
|
|
|
Option
|
|
.B lineart-fix
|
|
is positional and works around a timing problem that seems to exist
|
|
with certain MFS-12000SP scanners. The problem manifests itself in
|
|
dropped lines when scanning in lineart mode. Turning on this option
|
|
should fix the problem but may slow down scanning a bit.
|
|
|
|
Option
|
|
.B legal-size
|
|
is positional and sets the size of the scan area to Legal format. Set this
|
|
option if you own a Paragon 12000 LS. It can't be distinguished by
|
|
software from a ScanExpress 12000 SP (ISO A4 format).
|
|
|
|
Option
|
|
.B buffersize
|
|
is a positional option that overrides the default value set for the size of
|
|
the SCSI buffer. The buffer size is specified in kilobytes. The default value
|
|
is 128. Because of double buffering the buffer actually sent to the scanner
|
|
is half the size of this value. Try to increase this value to achieve higher
|
|
scan speeds. Note that some ScanExpress scanners don't like buffer sizes above
|
|
64 kb (buffersize = 128). If your sg driver can't set SCSI buffer sizes at
|
|
runtime you may have to change that value, too. See sane-scsi(5) for details.
|
|
|
|
Option
|
|
.B blocksize
|
|
is a positional option that overrides the default value set for the maximum
|
|
amount of data scanned in one block. The buffer size is specified in
|
|
kilobytes. Some scanners freeze if this value is bigger than 2048. The default
|
|
value is 1 GB (so effectively no limit) for most scanners. Don't change this
|
|
value if you don't know exactly what you do.
|
|
|
|
Option
|
|
.B strip-height
|
|
is a global option that limits the maximum height of the strip scanned with a
|
|
single SCSI read command. The height is specified in inches and may contain a
|
|
fractional part (e.g., 1.5). Setting the strip-height to a small value (one
|
|
inch, for example) reduces the likelihood of encountering problems with SCSI
|
|
driver timeouts and/or timeouts with other devices on the same SCSI bus.
|
|
Unfortunately, it also increases scan times. Thus, if the scanner is the only
|
|
device on the SCSI bus it is connected to and if it is known that the SCSI
|
|
driver does not suffer from premature timeouts, it is recommended to increase
|
|
the strip-height or remove the option completely, which corresponds to an
|
|
infinite strip height. See sane-scsi(5) on how to avoid problems with SCSI
|
|
timeouts.
|
|
|
|
Finally,
|
|
.B force-wait
|
|
is a global option. If set, the backend will wait until the device is ready
|
|
before sending the inquiry command. Further more the backend will force the
|
|
scan slider to return to its starting position (not implemented for all
|
|
scanners). This option may be necessary with the 600 II N or when scanimage is
|
|
used multiple times (e.g. in scripts). The default is off (not set).
|
|
|
|
.PP
|
|
A sample configuration file is shown below:
|
|
.PP
|
|
.RS
|
|
# limit strip height of all scanners to 1.5 inches:
|
|
.br
|
|
option strip-height 1.5
|
|
.br
|
|
|
|
.br
|
|
/dev/scanner # first Mustek scanner
|
|
.br
|
|
# 1 MB buffer for /dev/scanner:
|
|
.br
|
|
option buffersize 1024
|
|
.br
|
|
/dev/sge # second Mustek scanner
|
|
.br
|
|
# turn on fixes for /dev/sge:
|
|
.br
|
|
option lineart-fix
|
|
.br
|
|
option linedistance-fix
|
|
.RE
|
|
|
|
.SH SCSI ADAPTER TIPS
|
|
Mustek SCSI scanners are typically delivered with an ISA SCSI adapter.
|
|
Unfortunately, that adapter is not worth much since it is not
|
|
interrupt driven. It is (sometimes) possible to get the supplied card
|
|
to work, but without interrupt line, scanning will be very slow and put
|
|
so much load on the system, that it becomes almost unusable for other tasks.
|
|
.PP
|
|
If you already have a working SCSI controller in your system, you
|
|
should consider that Mustek scanners do not support the SCSI-2
|
|
disconnect/reconnect protocol and hence tie up the SCSI bus while a
|
|
scan is in progress. This means that no other SCSI device on the same
|
|
bus can be accessed while a scan is in progress.
|
|
.PP
|
|
Because the Mustek-supplied adapter is not worth much and because
|
|
Mustek scanners do not support the SCSI-2 disconnect/reconnect
|
|
protocol, it is recommended to install a separate (cheap) SCSI
|
|
controller for Mustek scanners. For example, ncr810 based cards are
|
|
known to work fine and cost as little as fifty US dollars.
|
|
.PP
|
|
For Mustek scanners, it is typically necessary to configure the
|
|
low-level SCSI driver to disable synchronous transfers, tagged command
|
|
queuing, and target disconnects. See sane\-scsi(5) for driver and
|
|
platform-specific information.
|
|
.PP
|
|
The ScanExpress models have sometimes trouble with high resolution
|
|
color mode. If you encounter sporadic corrupted images (parts duplicated
|
|
or shifted horizontally) kill all other applications before scanning
|
|
and (if sufficient memory is available) disable swapping.
|
|
|
|
.SH PARAGON 600 II N
|
|
This backend has support for the Paragon 600 II N parallel port
|
|
scanner. Note that this scanner comes with its own ISA card that
|
|
implements a funky parallel port (in other words, the scanner does not
|
|
connected to the printer parallel port).
|
|
.PP
|
|
This scanner can be configured by listing the port number
|
|
of the adapter in the mustek.conf file. Valid port numbers are 0x26b,
|
|
0x2ab, 0x2eb, 0x22b, 0x32b, 0x36b, 0x3ab, 0x3eb. Pick one that
|
|
doesn't conflict with the other hardware in your computer. Put only
|
|
one number on a single line. Example:
|
|
|
|
.IR 0x3eb
|
|
|
|
.PP
|
|
Note that for this scanner root privileges are required to access the
|
|
I/O ports. Thus, either make frontends such as scanimage(1) and
|
|
xscanimage(1) setuid root (generally not recommended for safety
|
|
reasons) or, alternatively, access this backend through the network
|
|
daemon saned(1). On systems which support this feature, the scanner
|
|
can be accessed through
|
|
.IR /dev/port.
|
|
Don't forget to adjust the permissions for /dev/port. At least with
|
|
recent Linux kernels root privileges are necessary for /dev/port access,
|
|
too.
|
|
.PP
|
|
If your images have horizontal stripes in color mode, check option
|
|
linedistance-fix (see above). Apply this option for a scanner with
|
|
firmware version 2.x and disable it for version 1.x.
|
|
.PP
|
|
If the Mustek backend blocks while sending the inqiury command to the scanner,
|
|
add the option force-wait to mustek.conf.
|
|
.PP
|
|
Also note that after a while of no activity, some scanners themself (not
|
|
the SANE backend) turns off their CCFL lamps. This shutdown is not always
|
|
perfect with the result that the lamp sometimes continues to glow
|
|
dimly at one end. This doesn't appear to be dangerous since as soon as
|
|
you use the scanner again, the lamp turns back on to the normal high
|
|
brightness. However, the first image scanned after such a shutdown may
|
|
have stripes and appear to be over-exposed. When this happens, just
|
|
take another scan, and the image will be fine.
|
|
.SH FILES
|
|
.TP
|
|
.I @CONFIGDIR@/mustek.conf
|
|
The backend configuration file (see also description of
|
|
.B SANE_CONFIG_DIR
|
|
below).
|
|
.TP
|
|
.I @LIBDIR@/libsane-mustek.a
|
|
The static library implementing this backend.
|
|
.TP
|
|
.I @LIBDIR@/libsane-mustek.so
|
|
The shared library implementing this backend (present on systems that
|
|
support dynamic loading).
|
|
.SH ENVIRONMENT
|
|
.TP
|
|
.B SANE_CONFIG_DIR
|
|
This environment variable specifies the list of directories that may
|
|
contain the configuration file. Under UNIX, the directories are
|
|
separated by a colon (`:'), under OS/2, they are separated by a
|
|
semi-colon (`;'). If this variable is not set, the configuration file
|
|
is searched in two default directories: first, the current working
|
|
directory (".") and then in @CONFIGDIR@. If the value of the
|
|
environment variable ends with the directory separator character, then
|
|
the default directories are searched after the explicitly specified
|
|
directories. For example, setting
|
|
.B SANE_CONFIG_DIR
|
|
to "/tmp/config:" would result in directories "tmp/config", ".", and
|
|
"@CONFIGDIR@" being searched (in this order).
|
|
.TP
|
|
.B SANE_DEBUG_MUSTEK
|
|
If the library was compiled with debug support enabled, this
|
|
environment variable controls the debug level for this backend. Higher
|
|
debug levels increase the verbosity of the output.
|
|
|
|
.nf
|
|
Value Descsription
|
|
0 no output
|
|
1 print fatal errors
|
|
2 print important messages
|
|
3 print non-fatal errors and less important messages
|
|
4 print all but debugging messages
|
|
5 print everything
|
|
|
|
Example:
|
|
export SANE_DEBUG_MUSTEK=4
|
|
|
|
.SH "SEE ALSO"
|
|
sane-find-scanner(1), sane\-scsi(5), sane-mustek_pp(5)
|
|
.SH AUTHOR
|
|
David Mosberger, Andreas Czechanowski, Andreas Bolsch (SE extensions),
|
|
Henning Meier-Geinitz
|
|
.SH BUGS
|
|
Scanning with the SCSI adapters supplied by Mustek is very slow at
|
|
high resolutions and wide scanareas.
|
|
|
|
Only 1, 8 and 24 bit modes are supported until now.
|
|
|
|
Calibration doesn't work correctly for all scanners.
|
|
|
|
Some scanners (e.g. Paragon 1200 A3 + Pro, SE A3) need more testing.
|
|
|
|
More detailed bug information is available at the Mustek backend
|
|
homepage
|
|
.IR http://www.meier-geinitz.de/sane/ .
|
|
|