sane-project-backends/backend/epson2-ops.c

2176 wiersze
56 KiB
C

/*
* epson2.c - SANE library for Epson scanners.
*
* Based on Kazuhiro Sasayama previous
* Work on epson.[ch] file from the SANE package.
* Please see those files for additional copyrights.
*
* Copyright (C) 2006-09 Tower Technologies
* Author: Alessandro Zummo <a.zummo@towertech.it>
*
* This file is part of the SANE package.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2.
*/
#define DEBUG_DECLARE_ONLY
#include "sane/config.h"
#include <unistd.h> /* sleep */
#include <sys/select.h>
#include "byteorder.h"
#include "epson2.h"
#include "epson2-ops.h"
#include "epson2-io.h"
#include "epson2-commands.h"
/*
* request identity
* | request identity2
* | | request status
* | | | request condition
* | | | | set color mode
* | | | | | start scanning
* | | | | | | set data format
* | | | | | | | set resolution
* | | | | | | | | set zoom
* | | | | | | | | | set scan area
* | | | | | | | | | | set brightness
* | | | | | | | | | | | set gamma
* | | | | | | | | | | | | set halftoning
* | | | | | | | | | | | | | set color correction
* | | | | | | | | | | | | | | initialize scanner
* | | | | | | | | | | | | | | | set speed
* | | | | | | | | | | | | | | | | set lcount
* | | | | | | | | | | | | | | | | | mirror image
* | | | | | | | | | | | | | | | | | | set gamma table
* | | | | | | | | | | | | | | | | | | | set outline emphasis
* | | | | | | | | | | | | | | | | | | | | set dither
* | | | | | | | | | | | | | | | | | | | | | set color correction coefficients
* | | | | | | | | | | | | | | | | | | | | | | request extension status
* | | | | | | | | | | | | | | | | | | | | | | | control an extension
* | | | | | | | | | | | | | | | | | | | | | | | | forward feed / eject
* | | | | | | | | | | | | | | | | | | | | | | | | | feed
* | | | | | | | | | | | | | | | | | | | | | | | | | | request push button status
* | | | | | | | | | | | | | | | | | | | | | | | | | | | control auto area segmentation
* | | | | | | | | | | | | | | | | | | | | | | | | | | | | set film type
* | | | | | | | | | | | | | | | | | | | | | | | | | | | | | set exposure time
* | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | set bay
* | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | set threshold
* | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | set focus position
* | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | request focus position
* | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | request extended identity
* | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | request scanner status
* | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
* | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
*/
static struct EpsonCmd epson_cmd[] = {
{"A1",'I', 0 ,'F','S', 0 ,'G', 0 ,'R', 0 ,'A', 0 ,{ 0, 0, 0}, 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 },
{"A2",'I', 0 ,'F','S', 0 ,'G','D','R','H','A','L',{-3, 3, 0},'Z','B', 0 ,'@', 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 },
{"B1",'I', 0 ,'F','S','C','G','D','R', 0 ,'A', 0 ,{ 0, 0, 0}, 0 ,'B', 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 },
{"B2",'I', 0 ,'F','S','C','G','D','R','H','A','L',{-3, 3, 0},'Z','B', 0 ,'@', 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 },
{"B3",'I', 0 ,'F','S','C','G','D','R','H','A','L',{-3, 3, 0},'Z','B','M','@', 0 , 0 , 0 , 0 , 0 , 0 ,'m','f','e', 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 },
{"B4",'I', 0 ,'F','S','C','G','D','R','H','A','L',{-3, 3, 0},'Z','B','M','@','g','d', 0 ,'z','Q','b','m','f','e', 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 },
{"B5",'I', 0 ,'F','S','C','G','D','R','H','A','L',{-3, 3, 0},'Z','B','M','@','g','d','K','z','Q','b','m','f','e', 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 },
{"B6",'I', 0 ,'F','S','C','G','D','R','H','A','L',{-3, 3, 0},'Z','B','M','@','g','d','K','z','Q','b','m','f','e', 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 },
{"B7",'I', 0 ,'F','S','C','G','D','R','H','A','L',{-4, 3, 0},'Z','B','M','@','g','d','K','z','Q','b','m','f','e','\f', 0 ,'!','s','N', 0 , 0 ,'t', 0 , 0 ,'I','F'},
{"B8",'I', 0 ,'F','S','C','G','D','R','H','A','L',{-4, 3, 0},'Z','B','M','@','g','d','K','z','Q','b','m','f','e','\f', 0x19,'!','s','N', 0 , 0 ,'t','p','q','I','F'},
/* XXX 'f' probably not supported on F5 */
{"F5",'I', 0 ,'F','S','C','G','D','R','H','A','L',{-3, 3, 0},'Z', 0 ,'M','@','g','d','K','z','Q', 0 ,'m','f','e','\f', 0 , 0 , 0 ,'N','T','P', 0 , 0 , 0 , 0 , 0 },
{"D1",'I','i','F', 0 ,'C','G','D','R', 0 ,'A', 0 ,{ 0, 0, 0},'Z', 0 , 0 ,'@','g','d', 0 ,'z', 0 , 0 , 0 ,'f', 0 , 0 , 0 ,'!', 0 , 0 , 0 , 0 ,'t', 0 , 0 , 0 , 0 },
{"D2",'I','i','F', 0 ,'C','G','D','R', 0 ,'A', 0 ,{ 0, 0, 0},'Z', 0 , 0 ,'@','g','d', 0 ,'z', 0 , 0 , 0 ,'f','e', 0 , 0 ,'!', 0 ,'N', 0 , 0 ,'t', 0 , 0 , 0 , 0 },
{"D7",'I','i','F', 0 ,'C','G','D','R', 0 ,'A', 0 ,{ 0, 0, 0},'Z', 0 , 0 ,'@','g','d', 0 ,'z', 0 , 0 , 0 ,'f','e','\f', 0 ,'!', 0 ,'N', 0 , 0 ,'t', 0 , 0 , 0 , 0 },
{"D8",'I','i','F', 0 ,'C','G','D','R', 0 ,'A', 0 ,{ 0, 0, 0},'Z', 0 , 0 ,'@','g','d', 0 ,'z', 0 , 0 , 0 ,'f','e','\f', 0 ,'!', 0 ,'N', 0 , 0 ,'t', 0 , 0 , 0 , 0 },
};
extern struct mode_param mode_params[];
/* Define the different scan sources */
#define FBF_STR SANE_I18N("Flatbed")
#define TPU_STR SANE_I18N("Transparency Unit")
#define ADF_STR SANE_I18N("Automatic Document Feeder")
/*
* source list need one dummy entry (save device settings is crashing).
* NOTE: no const - this list gets created while exploring the capabilities
* of the scanner.
*/
extern SANE_String_Const source_list[];
static int film_params[] = { 0, 1, 2, 3 };
extern const int halftone_params[];
static const int dropout_params[] = {
0x00, /* none */
0x10, /* red */
0x20, /* green */
0x30 /* blue */
};
/*
* Color correction:
* One array for the actual parameters that get sent to the scanner (color_params[]),
* one array for the strings that get displayed in the user interface (correction_list[])
* and one array to mark the user defined color correction (correction_userdefined[]).
*/
static const int correction_params[] = {
0x00, /* None */
0x01, /* Auto */
0x01, /* User defined */
};
void
e2_dev_init(Epson_Device *dev, const char *devname, int conntype)
{
DBG(5, "%s\n", __func__);
dev->name = NULL;
dev->model = NULL;
dev->connection = conntype;
dev->model_id = 0;
dev->sane.name = devname;
dev->sane.model = NULL;
dev->sane.type = "flatbed scanner";
dev->sane.vendor = "Epson";
dev->optical_res = 0; /* just to have it initialized */
dev->color_shuffle = SANE_FALSE;
dev->extension = SANE_FALSE;
dev->use_extension = SANE_FALSE;
dev->need_color_reorder = SANE_FALSE;
dev->need_double_vertical = SANE_FALSE;
dev->cct_profile = &epson_cct_profiles[0]; /* default profile */
dev->cmd = &epson_cmd[EPSON_LEVEL_DEFAULT];
/* Change default level when using a network connection */
if (dev->connection == SANE_EPSON_NET)
dev->cmd = &epson_cmd[EPSON_LEVEL_B7];
dev->last_res = 0;
dev->last_res_preview = 0; /* set resolution to safe values */
dev->res_list_size = 0;
dev->res_list = NULL;
}
SANE_Status
e2_dev_post_init(struct Epson_Device *dev)
{
int i;
DBG(5, "%s\n", __func__);
/* find cct model id */
for (i = 0; epson_cct_models[i].name != NULL; i++) {
if (strcmp(epson_cct_models[i].name, dev->model) == 0) {
dev->model_id = epson_cct_models[i].id;
break;
}
}
/* find cct profile */
for (i = 0; epson_cct_profiles[i].model != 0xFF; i++) {
if (epson_cct_profiles[i].model == dev->model_id) {
dev->cct_profile = &epson_cct_profiles[i];
break;
}
}
DBG(1, "CCT model id is 0x%02x, profile offset %d\n", dev->model_id, i);
/* If we have been unable to obtain supported resolutions
* due to the fact we are on the network transport,
* add some convenient ones
*/
if (dev->res_list_size == 0) {
int val = (dev->dpi_range.min < 150) ? 150 : dev->dpi_range.min;
DBG(1, "cannot obtain resolution list, faking (%d-%d)\n",
dev->dpi_range.min, dev->dpi_range.max);
if (dev->dpi_range.min <= 25)
e2_add_resolution(dev, 25);
if (dev->dpi_range.min <= 50)
e2_add_resolution(dev, 50);
if (dev->dpi_range.min <= 75)
e2_add_resolution(dev, 75);
if (dev->dpi_range.min <= 100)
e2_add_resolution(dev, 100);
while (val <= dev->dpi_range.max) {
e2_add_resolution(dev, val);
val *= 2;
}
}
/* try to expand the resolution list where appropriate */
int last = dev->res_list[dev->res_list_size - 1];
DBG(1, "highest available resolution: %d\n", last);
if (dev->optical_res > last) {
DBG(1, "adding optical resolution (%d)\n", dev->optical_res);
e2_add_resolution(dev, dev->optical_res);
}
if (dev->dpi_range.max > last && dev->dpi_range.max != dev->optical_res) {
int val = last + last;
DBG(1, "integrating resolution list (%d-%d)\n",
val, dev->dpi_range.max);
while (val <= dev->dpi_range.max) {
e2_add_resolution(dev, val);
val += last;
}
}
/*
* Copy the resolution list to the resolution_list array so that the frontend can
* display the correct values
*/
dev->resolution_list =
malloc((dev->res_list_size + 1) * sizeof(SANE_Word));
if (dev->resolution_list == NULL)
return SANE_STATUS_NO_MEM;
*(dev->resolution_list) = dev->res_list_size;
memcpy(&(dev->resolution_list[1]), dev->res_list,
dev->res_list_size * sizeof(SANE_Word));
/* establish defaults */
dev->need_reset_on_source_change = SANE_FALSE;
if (e2_dev_model(dev, "ES-9000H") || e2_dev_model(dev, "GT-30000")) {
dev->cmd->set_focus_position = 0;
dev->cmd->feed = 0x19;
}
if (e2_dev_model(dev, "GT-8200") || e2_dev_model(dev, "Perfection1650")
|| e2_dev_model(dev, "Perfection1640") || e2_dev_model(dev, "GT-8700")) {
dev->cmd->feed = 0;
dev->cmd->set_focus_position = 0;
dev->need_reset_on_source_change = SANE_TRUE;
}
return SANE_STATUS_GOOD;
}
SANE_Bool
e2_dev_model(Epson_Device *dev, const char *model)
{
if (dev->model == NULL)
return SANE_FALSE;
if (strncmp(dev->model, model, strlen(model)) == 0)
return SANE_TRUE;
return SANE_FALSE;
}
void
e2_set_cmd_level(SANE_Handle handle, unsigned char *level)
{
Epson_Scanner *s = (Epson_Scanner *) handle;
Epson_Device *dev = s->hw;
int n;
DBG(1, "%s: %c%c\n", __func__, level[0], level[1]);
/* set command type and level */
for (n = 0; n < NELEMS(epson_cmd); n++) {
char type_level[3];
sprintf(type_level, "%c%c", level[0], level[1]);
if (!strncmp(type_level, epson_cmd[n].level, 2))
break;
}
if (n < NELEMS(epson_cmd)) {
dev->cmd = &epson_cmd[n];
} else {
dev->cmd = &epson_cmd[EPSON_LEVEL_DEFAULT];
DBG(1, " unknown type %c or level %c, using %s\n",
level[0], level[1], dev->cmd->level);
}
s->hw->level = dev->cmd->level[1] - '0';
}
SANE_Status
e2_set_model(Epson_Scanner * s, unsigned char *model, size_t len)
{
unsigned char *buf;
unsigned char *p;
struct Epson_Device *dev = s->hw;
buf = malloc(len + 1);
if (buf == NULL)
return SANE_STATUS_NO_MEM;
memcpy(buf, model, len);
buf[len] = '\0';
p = &buf[len - 1];
while (*p == ' ') {
*p = '\0';
p--;
}
if (dev->model)
free(dev->model);
dev->model = strndup((const char *) buf, len);
dev->sane.model = dev->model;
DBG(10, "%s: model is '%s'\n", __func__, dev->model);
free(buf);
return SANE_STATUS_GOOD;
}
SANE_Status
e2_add_resolution(Epson_Device *dev, int r)
{
dev->res_list_size++;
dev->res_list = (SANE_Int *) realloc(dev->res_list,
dev->res_list_size *
sizeof(SANE_Word));
DBG(10, "%s: add (dpi): %d\n", __func__, r);
if (dev->res_list == NULL)
return SANE_STATUS_NO_MEM;
dev->res_list[dev->res_list_size - 1] = (SANE_Int) r;
return SANE_STATUS_GOOD;
}
void
e2_set_fbf_area(Epson_Scanner * s, int x, int y, int unit)
{
struct Epson_Device *dev = s->hw;
if (x == 0 || y == 0)
return;
dev->fbf_x_range.min = 0;
dev->fbf_x_range.max = SANE_FIX(x * MM_PER_INCH / unit);
dev->fbf_x_range.quant = 0;
dev->fbf_y_range.min = 0;
dev->fbf_y_range.max = SANE_FIX(y * MM_PER_INCH / unit);
dev->fbf_y_range.quant = 0;
DBG(5, "%s: %f,%f %f,%f %d [mm]\n",
__func__,
SANE_UNFIX(dev->fbf_x_range.min),
SANE_UNFIX(dev->fbf_y_range.min),
SANE_UNFIX(dev->fbf_x_range.max),
SANE_UNFIX(dev->fbf_y_range.max), unit);
}
void
e2_set_adf_area(struct Epson_Scanner *s, int x, int y, int unit)
{
struct Epson_Device *dev = s->hw;
dev->adf_x_range.min = 0;
dev->adf_x_range.max = SANE_FIX(x * MM_PER_INCH / unit);
dev->adf_x_range.quant = 0;
dev->adf_y_range.min = 0;
dev->adf_y_range.max = SANE_FIX(y * MM_PER_INCH / unit);
dev->adf_y_range.quant = 0;
DBG(5, "%s: %f,%f %f,%f %d [mm]\n",
__func__,
SANE_UNFIX(dev->adf_x_range.min),
SANE_UNFIX(dev->adf_y_range.min),
SANE_UNFIX(dev->adf_x_range.max),
SANE_UNFIX(dev->adf_y_range.max), unit);
}
void
e2_set_tpu_area(struct Epson_Scanner *s, int x, int y, int unit)
{
struct Epson_Device *dev = s->hw;
dev->tpu_x_range.min = 0;
dev->tpu_x_range.max = SANE_FIX(x * MM_PER_INCH / unit);
dev->tpu_x_range.quant = 0;
dev->tpu_y_range.min = 0;
dev->tpu_y_range.max = SANE_FIX(y * MM_PER_INCH / unit);
dev->tpu_y_range.quant = 0;
DBG(5, "%s: %f,%f %f,%f %d [mm]\n",
__func__,
SANE_UNFIX(dev->tpu_x_range.min),
SANE_UNFIX(dev->tpu_y_range.min),
SANE_UNFIX(dev->tpu_x_range.max),
SANE_UNFIX(dev->tpu_y_range.max), unit);
}
void
e2_add_depth(Epson_Device * dev, SANE_Word depth)
{
if (depth > dev->maxDepth)
dev->maxDepth = depth;
dev->depth_list[0]++;
dev->depth_list[dev->depth_list[0]] = depth;
}
/* A little helper function to correct the extended status reply
* gotten from scanners with known buggy firmware.
*/
static void
fix_up_extended_status_reply(Epson_Scanner * s, unsigned char *buf)
{
if (e2_model(s, "ES-9000H") || e2_model(s, "GT-30000")) {
DBG(1, "fixing up buggy ADF max scan dimensions.\n");
buf[2] = 0xB0;
buf[3] = 0x6D;
buf[4] = 0x60;
buf[5] = 0x9F;
}
}
SANE_Status
e2_discover_capabilities(Epson_Scanner *s)
{
SANE_Status status;
unsigned char scanner_status;
Epson_Device *dev = s->hw;
SANE_String_Const *source_list_add = source_list;
DBG(5, "%s\n", __func__);
/* always add flatbed */
*source_list_add++ = FBF_STR;
/* ESC I, request identity
* this must be the first command on the FilmScan 200
*/
if (dev->connection != SANE_EPSON_NET) {
unsigned int n, k, x = 0, y = 0;
unsigned char *buf, *area;
size_t len;
status = esci_request_identity(s, &buf, &len);
if (status != SANE_STATUS_GOOD)
return status;
e2_set_cmd_level(s, &buf[0]);
/* Setting available resolutions and xy ranges for sane frontend. */
/* cycle thru the resolutions, saving them in a list */
for (n = 2, k = 0; n < len; n += k) {
area = buf + n;
switch (*area) {
case 'R':
{
int val = area[2] << 8 | area[1];
status = e2_add_resolution(s->hw, val);
k = 3;
continue;
}
case 'A':
{
x = area[2] << 8 | area[1];
y = area[4] << 8 | area[3];
DBG(1, "maximum scan area: %dx%d\n", x, y);
k = 5;
continue;
}
default:
break;
}
}
/* min and max dpi */
dev->dpi_range.min = dev->res_list[0];
dev->dpi_range.max = dev->res_list[dev->res_list_size - 1];
dev->dpi_range.quant = 0;
e2_set_fbf_area(s, x, y, dev->dpi_range.max);
free(buf);
}
/* ESC F, request status */
status = esci_request_status(s, &scanner_status);
if (status != SANE_STATUS_GOOD)
return status;;
/* set capabilities */
if (scanner_status & STATUS_OPTION)
dev->extension = SANE_TRUE;
if (scanner_status & STATUS_EXT_COMMANDS)
dev->extended_commands = 1;
/*
* Extended status flag request (ESC f).
* this also requests the scanner device name from the the scanner.
* It seems unsupported on the network transport (CX11NF/LP-A500).
* so avoid it if the device support request_extended_identity.
*/
if (dev->cmd->request_extended_status && !dev->cmd->request_extended_identity) {
unsigned char *es;
size_t es_len;
DBG(1, "detection with request_extended_status\n");
status = esci_request_extended_status(s, &es, &es_len);
if (status != SANE_STATUS_GOOD)
return status;
/*
* Get the device name and copy it to dev->sane.model.
* The device name starts at es[0x1A] and is up to 16 bytes long
* We are overwriting whatever was set previously!
*/
if (es_len == CMD_SIZE_EXT_STATUS) /* 42 */
e2_set_model(s, es + 0x1A, 16);
if (es[0] & EXT_STATUS_LID)
DBG(1, "LID detected\n");
if (es[0] & EXT_STATUS_PB)
DBG(1, "push button detected\n");
else
dev->cmd->request_push_button_status = 0;
/* Flatbed */
e2_set_fbf_area(s, es[13] << 8 | es[12], es[15] << 8 | es[14],
dev->dpi_range.max);
/* ADF */
if (dev->extension && (es[1] & EXT_STATUS_IST)) {
DBG(1, "ADF detected\n");
fix_up_extended_status_reply(s, es);
dev->duplex = (es[0] & EXT_STATUS_ADFS) != 0;
if (dev->duplex)
DBG(1, "ADF supports duplex\n");
if (es[1] & EXT_STATUS_EN) {
DBG(1, "ADF is enabled\n");
dev->x_range = &dev->adf_x_range;
dev->y_range = &dev->adf_y_range;
}
e2_set_adf_area(s, es[3] << 8 | es[2],
es[5] << 8 | es[4],
dev->dpi_range.max);
*source_list_add++ = ADF_STR;
dev->ADF = SANE_TRUE;
}
/* TPU */
if (dev->extension && (es[6] & EXT_STATUS_IST)) {
DBG(1, "TPU detected\n");
if (es[6] & EXT_STATUS_EN) {
DBG(1, "TPU is enabled\n");
dev->x_range = &dev->tpu_x_range;
dev->y_range = &dev->tpu_y_range;
}
e2_set_tpu_area(s,
(es[8] << 8 | es[7]),
(es[10] << 8 | es[9]),
dev->dpi_range.max);
*source_list_add++ = TPU_STR;
dev->TPU = SANE_TRUE;
}
free(es);
*source_list_add = NULL; /* add end marker to source list */
}
/* FS I, request extended identity (B7/B8) */
if (dev->extended_commands && dev->cmd->request_extended_identity) {
unsigned char buf[80];
DBG(1, "detection with request_extended_identity\n");
status = esci_request_extended_identity(s, buf);
if (status != SANE_STATUS_GOOD)
return status;
e2_set_cmd_level(s, &buf[0]);
dev->maxDepth = buf[67];
/* set model name. it will probably be
* different than the one reported by request_identity
* for the same unit (i.e. LP-A500 vs CX11) .
*/
e2_set_model(s, &buf[46], 16);
dev->optical_res = le32atoh(&buf[4]);
dev->dpi_range.min = le32atoh(&buf[8]);
dev->dpi_range.max = le32atoh(&buf[12]);
/* Flatbed */
e2_set_fbf_area(s, le32atoh(&buf[20]),
le32atoh(&buf[24]), dev->optical_res);
/* ADF */
if (le32atoh(&buf[28]) > 0) {
e2_set_adf_area(s, le32atoh(&buf[28]),
le32atoh(&buf[32]), dev->optical_res);
if (!dev->ADF) {
*source_list_add++ = ADF_STR;
dev->ADF = SANE_TRUE;
}
}
/* TPU */
if (e2_model(s, "GT-X800")) {
if (le32atoh(&buf[68]) > 0 && !dev->TPU) {
e2_set_tpu_area(s,
le32atoh(&buf[68]),
le32atoh(&buf[72]),
dev->optical_res);
*source_list_add++ = TPU_STR;
dev->TPU = SANE_TRUE;
dev->TPU2 = SANE_TRUE;
}
}
if (le32atoh(&buf[36]) > 0 && !dev->TPU) {
e2_set_tpu_area(s,
le32atoh(&buf[36]),
le32atoh(&buf[40]), dev->optical_res);
*source_list_add++ = TPU_STR;
dev->TPU = SANE_TRUE;
}
*source_list_add = NULL; /* add end marker to source list */
} else {
DBG(1, "no command available to detect capabilities\n");
}
/*
* request identity 2 (ESC i), if available will
* get the information from the scanner and store it in dev
*/
if (dev->cmd->request_identity2 && dev->connection != SANE_EPSON_NET) {
unsigned char *buf;
status = esci_request_identity2(s, &buf);
if (status != SANE_STATUS_GOOD)
return status;
/* the first two bytes of the buffer contain the optical resolution */
dev->optical_res = buf[1] << 8 | buf[0];
/*
* the 4th and 5th byte contain the line distance. Both values have to
* be identical, otherwise this software can not handle this scanner.
*/
if (buf[4] != buf[5]) {
status = SANE_STATUS_INVAL;
return status;
}
dev->max_line_distance = buf[4];
}
/*
* Check for the max. supported color depth and assign
* the values to the bitDepthList.
*/
dev->depth_list = malloc(sizeof(SANE_Word) * 4);
if (dev->depth_list == NULL) {
DBG(1, "out of memory (line %d)\n", __LINE__);
return SANE_STATUS_NO_MEM;
}
dev->depth_list[0] = 0;
/* maximum depth discovery */
DBG(3, "discovering max depth, NAKs are expected\n");
if (dev->maxDepth >= 16 || dev->maxDepth == 0) {
if (esci_set_data_format(s, 16) == SANE_STATUS_GOOD)
e2_add_depth(dev, 16);
}
if (dev->maxDepth >= 14 || dev->maxDepth == 0) {
if (esci_set_data_format(s, 14) == SANE_STATUS_GOOD)
e2_add_depth(dev, 14);
}
if (dev->maxDepth >= 12 || dev->maxDepth == 0) {
if (esci_set_data_format(s, 12) == SANE_STATUS_GOOD)
e2_add_depth(dev, 12);
}
/* add default depth */
e2_add_depth(dev, 8);
DBG(1, "maximum supported color depth: %d\n", dev->maxDepth);
/*
* Check for "request focus position" command. If this command is
* supported, then the scanner does also support the "set focus
* position" command.
* XXX ???
*/
if (esci_request_focus_position(s, &s->currentFocusPosition) ==
SANE_STATUS_GOOD) {
DBG(1, "setting focus is supported\n");
dev->focusSupport = SANE_TRUE;
s->opt[OPT_FOCUS].cap &= ~SANE_CAP_INACTIVE;
/* reflect the current focus position in the GUI */
if (s->currentFocusPosition < 0x4C) {
/* focus on glass */
s->val[OPT_FOCUS].w = 0;
} else {
/* focus 2.5mm above glass */
s->val[OPT_FOCUS].w = 1;
}
} else {
DBG(1, "setting focus is not supported\n");
dev->focusSupport = SANE_FALSE;
s->opt[OPT_FOCUS].cap |= SANE_CAP_INACTIVE;
s->val[OPT_FOCUS].w = 0; /* on glass - just in case */
}
/* Set defaults for no extension. */
dev->x_range = &dev->fbf_x_range;
dev->y_range = &dev->fbf_y_range;
/*
* Correct for a firmware bug in some Perfection 1650 scanners:
* Firmware version 1.08 reports only half the vertical scan area, we have
* to double the number. To find out if we have to do this, we just compare
* is the vertical range is smaller than the horizontal range.
*/
if ((dev->x_range->max - dev->x_range->min) >
(dev->y_range->max - dev->y_range->min)) {
DBG(1, "found buggy scan area, doubling it.\n");
dev->y_range->max += (dev->y_range->max - dev->y_range->min);
dev->need_double_vertical = SANE_TRUE;
dev->need_color_reorder = SANE_TRUE;
}
/* FS F, request scanner status */
if (dev->extended_commands) {
unsigned char buf[16];
status = esci_request_scanner_status(s, buf);
if (status != SANE_STATUS_GOOD)
return status;
}
return status;
}
SANE_Status
e2_set_extended_scanning_parameters(Epson_Scanner * s)
{
unsigned char buf[64];
const struct mode_param *mparam;
DBG(1, "%s\n", __func__);
mparam = &mode_params[s->val[OPT_MODE].w];
memset(buf, 0x00, sizeof(buf));
/* ESC R, resolution */
htole32a(&buf[0], s->val[OPT_RESOLUTION].w);
htole32a(&buf[4], s->val[OPT_RESOLUTION].w);
/* ESC A, scanning area */
htole32a(&buf[8], s->left);
htole32a(&buf[12], s->top);
htole32a(&buf[16], s->params.pixels_per_line);
htole32a(&buf[20], s->params.lines);
/*
* The byte sequence mode was introduced in B5,
*for B[34] we need line sequence mode
*/
/* ESC C, set color */
if ((s->hw->cmd->level[0] == 'D'
|| (s->hw->cmd->level[0] == 'B' && s->hw->level >= 5))
&& mparam->flags == 0x02) {
buf[24] = 0x13;
} else {
buf[24] = mparam->flags | (mparam->dropout_mask
& dropout_params[s->
val[OPT_DROPOUT].
w]);
}
/* ESC D, set data format */
mparam = &mode_params[s->val[OPT_MODE].w];
buf[25] = mparam->depth;
/* ESC e, control option */
if (s->hw->extension) {
char extensionCtrl;
extensionCtrl = (s->hw->use_extension ? 1 : 0);
if (s->hw->use_extension && (s->val[OPT_ADF_MODE].w == 1))
extensionCtrl = 2;
/* Test for TPU2
* Epson Perfection 4990 Command Specifications
* JZIS-0075 Rev. A, page 31
*/
if (s->hw->use_extension && s->hw->TPU2)
extensionCtrl = 5;
/* ESC e */
buf[26] = extensionCtrl;
/* XXX focus */
}
/* ESC g, scanning mode (normal or high speed) */
if (s->val[OPT_PREVIEW].w)
buf[27] = 1; /* High speed */
else
buf[27] = 0;
/* ESC d, block line number */
buf[28] = s->lcount;
/* ESC Z, set gamma correction */
buf[29] = 0x01; /* default */
if (SANE_OPTION_IS_ACTIVE(s->opt[OPT_GAMMA_CORRECTION].cap)) {
char val;
if (s->hw->cmd->level[0] == 'D') {
/* The D1 level has only the two user defined gamma
* settings.
*/
val = gamma_params[s->val[OPT_GAMMA_CORRECTION].w];
} else {
val = gamma_params[s->val[OPT_GAMMA_CORRECTION].w];
/*
* If "Default" is selected then determine the actual value
* to send to the scanner: If bilevel mode, just send the
* value from the table (0x01), for grayscale or color mode
* add one and send 0x02.
*/
if (s->val[OPT_GAMMA_CORRECTION].w == 0) {
val += mparam->depth == 1 ? 0 : 1;
}
}
buf[29] = val;
}
/* ESC L, set brightness */
if (SANE_OPTION_IS_ACTIVE(s->opt[OPT_BRIGHTNESS].cap))
buf[30] = s->val[OPT_BRIGHTNESS].w;
/* ESC B, set halftoning mode / halftone processing */
if (SANE_OPTION_IS_ACTIVE(s->opt[OPT_HALFTONE].cap))
buf[32] = halftone_params[s->val[OPT_HALFTONE].w];
/* ESC s, auto area segmentation */
if (SANE_OPTION_IS_ACTIVE(s->opt[OPT_AAS].cap))
buf[34] = s->val[OPT_AAS].w;
/* ESC Q, set sharpness / sharpness control */
if (SANE_OPTION_IS_ACTIVE(s->opt[OPT_SHARPNESS].cap))
buf[35] = s->val[OPT_SHARPNESS].w;
/* ESC K, set data order / mirroring */
if (SANE_OPTION_IS_ACTIVE(s->opt[OPT_MIRROR].cap))
buf[36] = s->val[OPT_MIRROR].w;
/* ESC N, film type */
if (SANE_OPTION_IS_ACTIVE(s->opt[OPT_FILM_TYPE].cap))
buf[37] = film_params[s->val[OPT_FILM_TYPE].w];
/* ESC M, color correction */
buf[31] = correction_params[s->val[OPT_COLOR_CORRECTION].w];
/* ESC t, threshold */
buf[33] = s->val[OPT_THRESHOLD].w;
return esci_set_scanning_parameter(s, buf);
}
SANE_Status
e2_set_scanning_parameters(Epson_Scanner * s)
{
SANE_Status status;
struct mode_param *mparam = &mode_params[s->val[OPT_MODE].w];
unsigned char color_mode;
DBG(1, "%s\n", __func__);
/*
* There is some undocumented special behavior with the TPU enable/disable.
* TPU power ESC e status
* on 0 NAK
* on 1 ACK
* off 0 ACK
* off 1 NAK
*
* It makes no sense to scan with TPU powered on and source flatbed, because
* light will come from both sides.
*/
if (s->hw->extension) {
int extensionCtrl;
extensionCtrl = (s->hw->use_extension ? 1 : 0);
if (s->hw->use_extension && (s->val[OPT_ADF_MODE].w == 1))
extensionCtrl = 2;
status = esci_control_extension(s, extensionCtrl);
if (status != SANE_STATUS_GOOD) {
DBG(1, "you may have to power %s your TPU\n",
s->hw->use_extension ? "on" : "off");
DBG(1,
"and you may also have to restart the SANE frontend.\n");
return status;
}
/* XXX use request_extended_status and analyze
* buffer to set the scan area for
* ES-9000H and GT-30000
*/
/*
* set the focus position according to the extension used:
* if the TPU is selected, then focus 2.5mm above the glass,
* otherwise focus on the glass. Scanners that don't support
* this feature, will just ignore these calls.
*/
if (s->hw->focusSupport == SANE_TRUE) {
if (s->val[OPT_FOCUS].w == 0) {
DBG(1, "setting focus to glass surface\n");
esci_set_focus_position(s, 0x40);
} else {
DBG(1,
"setting focus to 2.5mm above glass\n");
esci_set_focus_position(s, 0x59);
}
}
}
/* ESC C, Set color */
color_mode = mparam->flags | (mparam->dropout_mask
& dropout_params[s->val[OPT_DROPOUT].
w]);
/*
* The byte sequence mode was introduced in B5, for B[34] we need line sequence mode
* XXX Check what to do for the FilmScan 200
*/
if ((s->hw->cmd->level[0] == 'D'
|| (s->hw->cmd->level[0] == 'B' && s->hw->level >= 5))
&& mparam->flags == 0x02)
color_mode = 0x13;
status = esci_set_color_mode(s, color_mode);
if (status != SANE_STATUS_GOOD)
return status;
/* ESC D, set data format */
DBG(1, "%s: setting data format to %d bits\n", __func__,
mparam->depth);
status = esci_set_data_format(s, mparam->depth);
if (status != SANE_STATUS_GOOD)
return status;
/* ESC B, set halftoning mode */
if (s->hw->cmd->set_halftoning
&& SANE_OPTION_IS_ACTIVE(s->opt[OPT_HALFTONE].cap)) {
status = esci_set_halftoning(s,
halftone_params[s->
val
[OPT_HALFTONE].
w]);
if (status != SANE_STATUS_GOOD)
return status;
}
/* ESC L, set brightness */
if (SANE_OPTION_IS_ACTIVE(s->opt[OPT_BRIGHTNESS].cap)) {
status = esci_set_bright(s, s->val[OPT_BRIGHTNESS].w);
if (status != SANE_STATUS_GOOD)
return status;
}
if (SANE_OPTION_IS_ACTIVE(s->opt[OPT_AAS].cap)) {
status = esci_set_auto_area_segmentation(s,
s->val[OPT_AAS].w);
if (status != SANE_STATUS_GOOD)
return status;
}
if (SANE_OPTION_IS_ACTIVE(s->opt[OPT_FILM_TYPE].cap)) {
status = esci_set_film_type(s,
film_params[s->val[OPT_FILM_TYPE].w]);
if (status != SANE_STATUS_GOOD)
return status;
}
if (s->hw->cmd->set_gamma
&& SANE_OPTION_IS_ACTIVE(s->opt[OPT_GAMMA_CORRECTION].cap)) {
int val;
if (s->hw->cmd->level[0] == 'D') {
/*
* The D1 level has only the two user defined gamma
* settings.
*/
val = gamma_params[s->val[OPT_GAMMA_CORRECTION].w];
} else {
val = gamma_params[s->val[OPT_GAMMA_CORRECTION].w];
/*
* If "Default" is selected then determine the actual value
* to send to the scanner: If bilevel mode, just send the
* value from the table (0x01), for grayscale or color mode
* add one and send 0x02.
*/
/* if( s->val[ OPT_GAMMA_CORRECTION].w <= 1) { */
if (s->val[OPT_GAMMA_CORRECTION].w == 0) {
val += mparam->depth == 1 ? 0 : 1;
}
}
status = esci_set_gamma(s, val);
if (status != SANE_STATUS_GOOD)
return status;
}
if (s->hw->cmd->set_threshold != 0
&& SANE_OPTION_IS_ACTIVE(s->opt[OPT_THRESHOLD].cap)) {
status = esci_set_threshold(s, s->val[OPT_THRESHOLD].w);
if (status != SANE_STATUS_GOOD)
return status;
}
/* XXX ESC Z here */
/* ESC M, set color correction */
if (SANE_OPTION_IS_ACTIVE(s->opt[OPT_COLOR_CORRECTION].cap)) {
status = esci_set_color_correction(s,
correction_params[s->val[OPT_COLOR_CORRECTION].w]);
if (status != SANE_STATUS_GOOD)
return status;
}
/* ESC Q, set sharpness */
if (SANE_OPTION_IS_ACTIVE(s->opt[OPT_SHARPNESS].cap)) {
status = esci_set_sharpness(s, s->val[OPT_SHARPNESS].w);
if (status != SANE_STATUS_GOOD)
return status;
}
/* ESC g, set scanning mode */
if (s->val[OPT_PREVIEW].w)
status = esci_set_speed(s, 1);
else
status = esci_set_speed(s, 0);
if (status != SANE_STATUS_GOOD)
return status;
/* ESC K, set data order */
if (SANE_OPTION_IS_ACTIVE(s->opt[OPT_MIRROR].cap)) {
status = esci_mirror_image(s, s->val[OPT_MIRROR].w);
if (status != SANE_STATUS_GOOD)
return status;
}
/* ESC R */
status = esci_set_resolution(s, s->val[OPT_RESOLUTION].w,
s->val[OPT_RESOLUTION].w);
if (status != SANE_STATUS_GOOD)
return status;
/* ESC H, set zoom */
/* not implemented */
/* ESC A, set scanning area */
/*
* Modify the scan area: If the scanner requires color shuffling, then we try to
* scan more lines to compensate for the lines that will be removed from the scan
* due to the color shuffling algorithm.
*/
if (s->hw->color_shuffle == SANE_TRUE) {
unsigned int lines = s->params.lines + (2 * s->line_distance);
int top = s->top - (1 * s->line_distance);
if (top < 0)
top = 0;
status = esci_set_scan_area(s, s->left, top,
s->params.pixels_per_line,
lines);
} else {
status = esci_set_scan_area(s, s->left, s->top,
s->params.pixels_per_line,
s->params.lines);
}
if (status != SANE_STATUS_GOOD)
return status;
/* ESC d, set block line number / set line counter */
status = esci_set_lcount(s, s->lcount);
if (status != SANE_STATUS_GOOD)
return status;
return SANE_STATUS_GOOD;
}
void
e2_setup_block_mode(Epson_Scanner * s)
{
int maxreq;
DBG(5, "%s\n", __func__);
s->block = SANE_TRUE;
if (s->hw->connection == SANE_EPSON_SCSI)
maxreq = sanei_scsi_max_request_size;
else if (s->hw->connection == SANE_EPSON_USB)
maxreq = 128 * 1024;
else
maxreq = 32 * 1024;
/* XXX verify if this can b extended to other models */
if (s->hw->connection == SANE_EPSON_NET && e2_model(s, "LP-A500"))
maxreq = 64 * 1024;
s->lcount = maxreq / s->params.bytes_per_line;
DBG(1, "max req size: %d, line count: %d\n", maxreq, s->lcount);
/* XXX investigate this */
if (s->lcount < 3 && e2_model(s, "GT-X800")) {
s->lcount = 21;
DBG(17,
"%s: set lcount = %i bigger than sanei_scsi_max_request_size\n",
__func__, s->lcount);
}
if (s->lcount >= 255)
s->lcount = 255;
/* XXX why this? */
if (s->hw->TPU && s->hw->use_extension && s->lcount > 32)
s->lcount = 32;
/*
* The D1 series of scanners only allow an even line number
* for bi-level scanning. If a bit depth of 1 is selected, then
* make sure the next lower even number is selected.
*/
/* XXX check bith depth? */
if (s->hw->cmd->level[0] == 'D' && s->lcount > 3 && s->lcount % 2)
s->lcount -= 1;
DBG(1, "final line count is %d\n", s->lcount);
}
SANE_Status
e2_init_parameters(Epson_Scanner * s)
{
int dpi, bytes_per_pixel;
struct mode_param *mparam;
DBG(5, "%s\n", __func__);
memset(&s->params, 0, sizeof(SANE_Parameters));
dpi = s->val[OPT_RESOLUTION].w;
mparam = &mode_params[s->val[OPT_MODE].w];
if (SANE_UNFIX(s->val[OPT_BR_Y].w) == 0 ||
SANE_UNFIX(s->val[OPT_BR_X].w) == 0)
return SANE_STATUS_INVAL;
s->left = ((SANE_UNFIX(s->val[OPT_TL_X].w) / MM_PER_INCH) *
s->val[OPT_RESOLUTION].w) + 0.5;
s->top = ((SANE_UNFIX(s->val[OPT_TL_Y].w) / MM_PER_INCH) *
s->val[OPT_RESOLUTION].w) + 0.5;
s->params.pixels_per_line =
((SANE_UNFIX(s->val[OPT_BR_X].w -
s->val[OPT_TL_X].w) / MM_PER_INCH) * dpi) + 0.5;
s->params.lines =
((SANE_UNFIX(s->val[OPT_BR_Y].w -
s->val[OPT_TL_Y].w) / MM_PER_INCH) * dpi) + 0.5;
DBG(1, "%s: resolution = %d, preview = %d\n",
__func__, s->val[OPT_RESOLUTION].w, s->val[OPT_PREVIEW].w);
DBG(1, "%s: %p %p tlx %f tly %f brx %f bry %f [mm]\n",
__func__, (void *) s, (void *) s->val,
SANE_UNFIX(s->val[OPT_TL_X].w), SANE_UNFIX(s->val[OPT_TL_Y].w),
SANE_UNFIX(s->val[OPT_BR_X].w), SANE_UNFIX(s->val[OPT_BR_Y].w));
/*
* Calculate bytes_per_pixel and bytes_per_line for
* any color depths.
*
* The default color depth is stored in mode_params.depth:
*/
if (mode_params[s->val[OPT_MODE].w].depth == 1)
s->params.depth = 1;
else
s->params.depth = s->val[OPT_BIT_DEPTH].w;
if (s->params.depth > 8) {
s->params.depth = 16; /*
* The frontends can only handle 8 or 16 bits
* for gray or color - so if it's more than 8,
* it gets automatically set to 16. This works
* as long as EPSON does not come out with a
* scanner that can handle more than 16 bits
* per color channel.
*/
}
/* this works because it can only be set to 1, 8 or 16 */
bytes_per_pixel = s->params.depth / 8;
if (s->params.depth % 8) { /* just in case ... */
bytes_per_pixel++;
}
/* pixels_per_line is rounded to the next 8bit boundary */
s->params.pixels_per_line = s->params.pixels_per_line & ~7;
s->params.last_frame = SANE_TRUE;
switch (s->val[OPT_MODE].w) {
case MODE_BINARY:
case MODE_GRAY:
s->params.format = SANE_FRAME_GRAY;
s->params.bytes_per_line =
s->params.pixels_per_line * s->params.depth / 8;
break;
case MODE_COLOR:
s->params.format = SANE_FRAME_RGB;
s->params.bytes_per_line =
3 * s->params.pixels_per_line * bytes_per_pixel;
break;
#ifdef SANE_FRAME_IR
case MODE_INFRARED:
s->params.format = SANE_FRAME_IR;
s->params.bytes_per_line =
s->params.pixels_per_line * s->params.depth / 8;
break;
#endif
}
if (s->params.bytes_per_line == 0)
return SANE_STATUS_INVAL;
/*
* Calculate correction for line_distance in D1 scanner:
* Start line_distance lines earlier and add line_distance lines at the end
*
* Because the actual line_distance is not yet calculated we have to do this
* first.
*/
s->hw->color_shuffle = SANE_FALSE;
s->lines_written = 0;
s->color_shuffle_line = 0;
s->current_output_line = 0;
if ((s->hw->optical_res != 0) && (mparam->depth == 8)
&& (mparam->flags != 0)) {
s->line_distance =
s->hw->max_line_distance * dpi / s->hw->optical_res;
if (s->line_distance != 0) {
s->hw->color_shuffle = SANE_TRUE;
DBG(1, "%s: color shuffling required\n", __func__);
}
}
/*
* If (s->top + s->params.lines) is larger than the max scan area, reset
* the number of scan lines:
* XXX: precalculate the maximum scanning area elsewhere (use dev max_y)
*/
if (SANE_UNFIX(s->val[OPT_BR_Y].w) / MM_PER_INCH * dpi <
(s->params.lines + s->top)) {
s->params.lines =
((int) SANE_UNFIX(s->val[OPT_BR_Y].w) / MM_PER_INCH *
dpi + 0.5) - s->top;
}
s->block = SANE_FALSE;
s->lcount = 1;
/*
* The set line count commands needs to be sent for certain scanners in
* color mode. The D1 level requires it, we are however only testing for
* 'D' and not for the actual numeric level.
*/
if ((s->hw->cmd->level[0] == 'B') && (s->hw->level >= 5)) /* >= B5 */
e2_setup_block_mode(s);
else if ((s->hw->cmd->level[0] == 'B') && (s->hw->level == 4) /* B4 !color */
&& (!mode_params[s->val[OPT_MODE].w].color))
e2_setup_block_mode(s);
else if (s->hw->cmd->level[0] == 'D') /* Dx */
e2_setup_block_mode(s);
return (s->params.lines > 0) ? SANE_STATUS_GOOD : SANE_STATUS_INVAL;
}
void
e2_wait_button(Epson_Scanner * s)
{
DBG(5, "%s\n", __func__);
s->hw->wait_for_button = SANE_TRUE;
while (s->hw->wait_for_button == SANE_TRUE) {
unsigned char button_status = 0;
if (s->canceling == SANE_TRUE)
s->hw->wait_for_button = SANE_FALSE;
/* get the button status from the scanner */
else if (esci_request_push_button_status(s, &button_status) ==
SANE_STATUS_GOOD) {
if (button_status)
s->hw->wait_for_button = SANE_FALSE;
else
sleep(1);
} else {
/* we run into an error condition, just continue */
s->hw->wait_for_button = SANE_FALSE;
}
}
}
/*
SANE_Status
e2_check_extended_status(Epson_Scanner *s)
{
SANE_Status status = esci_request_scanner_status(s, buf);
if (status != SANE_STATUS_GOOD)
return status;
if (buf[0] & FSF_STATUS_MAIN_WU)
main -> 0
fbf -> 3
adf -> 1, 10
tpu -> 2
}
*/
SANE_Status
e2_check_warm_up(Epson_Scanner * s, SANE_Bool * wup)
{
SANE_Status status;
DBG(5, "%s\n", __func__);
*wup = SANE_FALSE;
if (s->hw->extended_commands) {
unsigned char buf[16];
status = esci_request_scanner_status(s, buf);
if (status != SANE_STATUS_GOOD)
return status;
if (buf[0] & FSF_STATUS_MAIN_WU)
*wup = SANE_TRUE;
} else {
unsigned char *es;
/* this command is not available on some scanners */
if (!s->hw->cmd->request_extended_status)
return SANE_STATUS_GOOD;
status = esci_request_extended_status(s, &es, NULL);
if (status != SANE_STATUS_GOOD)
return status;
if (es[0] & EXT_STATUS_WU)
*wup = SANE_TRUE;
free(es);
}
return status;
}
SANE_Status
e2_wait_warm_up(Epson_Scanner * s)
{
SANE_Status status;
SANE_Bool wup;
DBG(5, "%s\n", __func__);
s->retry_count = 0;
while (1) {
if (s->canceling)
return SANE_STATUS_CANCELLED;
status = e2_check_warm_up(s, &wup);
if (status != SANE_STATUS_GOOD)
return status;
if (wup == SANE_FALSE)
break;
s->retry_count++;
if (s->retry_count > SANE_EPSON_MAX_RETRIES) {
DBG(1, "max retry count exceeded (%d)\n",
s->retry_count);
return SANE_STATUS_DEVICE_BUSY;
}
sleep(5);
}
return SANE_STATUS_GOOD;
}
SANE_Status
e2_check_adf(Epson_Scanner * s)
{
SANE_Status status;
DBG(5, "%s\n", __func__);
if (s->hw->use_extension == SANE_FALSE)
return SANE_STATUS_GOOD;
if (s->hw->extended_commands) {
unsigned char buf[16];
status = esci_request_scanner_status(s, buf);
if (status != SANE_STATUS_GOOD)
return status;
if (buf[1] & FSF_STATUS_ADF_PE)
return SANE_STATUS_NO_DOCS;
if (buf[1] & FSF_STATUS_ADF_PJ)
return SANE_STATUS_JAMMED;
} else {
unsigned char *buf, t;
status = esci_request_extended_status(s, &buf, NULL);
if (status != SANE_STATUS_GOOD)
return status;;
t = buf[1];
free(buf);
if (t & EXT_STATUS_PE)
return SANE_STATUS_NO_DOCS;
if (t & EXT_STATUS_PJ)
return SANE_STATUS_JAMMED;
}
return SANE_STATUS_GOOD;
}
SANE_Status
e2_start_std_scan(Epson_Scanner * s)
{
SANE_Status status;
unsigned char params[2];
DBG(5, "%s\n", __func__);
/* ESC g */
params[0] = ESC;
params[1] = s->hw->cmd->start_scanning;
e2_send(s, params, 2, 6 + (s->lcount * s->params.bytes_per_line),
&status);
return status;
}
SANE_Status
e2_start_ext_scan(Epson_Scanner * s)
{
SANE_Status status;
unsigned char params[2];
unsigned char buf[14];
DBG(5, "%s\n", __func__);
params[0] = FS;
params[1] = 'G';
status = e2_txrx(s, params, 2, buf, 14);
if (status != SANE_STATUS_GOOD)
return status;
if (buf[0] != STX)
return SANE_STATUS_INVAL;
if (buf[1] & 0x80) {
DBG(1, "%s: fatal error\n", __func__);
return SANE_STATUS_IO_ERROR;
}
s->ext_block_len = le32atoh(&buf[2]);
s->ext_blocks = le32atoh(&buf[6]);
s->ext_last_len = le32atoh(&buf[10]);
s->ext_counter = 0;
DBG(5, " status : 0x%02x\n", buf[1]);
DBG(5, " block size : %u\n", (unsigned int) le32atoh(&buf[2]));
DBG(5, " block count : %u\n", (unsigned int) le32atoh(&buf[6]));
DBG(5, " last block size: %u\n", (unsigned int) le32atoh(&buf[10]));
if (s->ext_last_len) {
s->ext_blocks++;
DBG(1, "adjusted block count: %d\n", s->ext_blocks);
}
/* adjust block len if we have only one block to read */
if (s->ext_block_len == 0 && s->ext_last_len)
s->ext_block_len = s->ext_last_len;
return status;
}
void
e2_scan_finish(Epson_Scanner * s)
{
DBG(5, "%s\n", __func__);
free(s->buf);
s->buf = NULL;
if (s->hw->ADF && s->hw->use_extension && s->val[OPT_AUTO_EJECT].w)
if (e2_check_adf(s) == SANE_STATUS_NO_DOCS)
esci_eject(s);
/* XXX required? */
if (s->hw->connection != SANE_EPSON_NET)
esci_reset(s);
}
void
e2_copy_image_data(Epson_Scanner * s, SANE_Byte * data, SANE_Int max_length,
SANE_Int * length)
{
if (!s->block && s->params.format == SANE_FRAME_RGB) {
max_length /= 3;
if (max_length > s->end - s->ptr)
max_length = s->end - s->ptr;
*length = 3 * max_length;
while (max_length-- != 0) {
*data++ = s->ptr[0];
*data++ = s->ptr[s->params.pixels_per_line];
*data++ = s->ptr[2 * s->params.pixels_per_line];
++s->ptr;
}
} else {
if (max_length > s->end - s->ptr)
max_length = s->end - s->ptr;
*length = max_length;
if (s->params.depth == 1) {
while (max_length-- != 0)
*data++ = ~*s->ptr++;
} else {
memcpy(data, s->ptr, max_length);
s->ptr += max_length;
}
}
}
SANE_Status
e2_ext_read(struct Epson_Scanner *s)
{
SANE_Status status = SANE_STATUS_GOOD;
ssize_t buf_len = 0, read;
/* did we passed everything we read to sane? */
if (s->ptr == s->end) {
if (s->eof)
return SANE_STATUS_EOF;
s->ext_counter++;
/* sane has already got the data, read some more, the final
* error byte must not be included in buf_len
*/
buf_len = s->ext_block_len;
if (s->ext_counter == s->ext_blocks && s->ext_last_len)
buf_len = s->ext_last_len;
DBG(18, "%s: block %d/%d, size %lu\n", __func__,
s->ext_counter, s->ext_blocks,
(unsigned long) buf_len);
/* receive image data + error code */
read = e2_recv(s, s->buf, buf_len + 1, &status);
DBG(18, "%s: read %lu bytes\n", __func__, (unsigned long) read);
if (read != buf_len + 1)
return SANE_STATUS_IO_ERROR;
if (s->buf[buf_len] & FSG_STATUS_CANCEL_REQ) {
DBG(0, "%s: cancel request received\n", __func__);
e2_cancel(s);
return SANE_STATUS_CANCELLED;
}
if (s->buf[buf_len] & (FSG_STATUS_FER | FSG_STATUS_NOT_READY))
return SANE_STATUS_IO_ERROR;
/* ack every block except the last one */
if (s->ext_counter < s->ext_blocks) {
size_t next_len = s->ext_block_len;
if (s->ext_counter == (s->ext_blocks - 1))
next_len = s->ext_last_len;
if (s->canceling) {
e2_cancel(s);
return SANE_STATUS_CANCELLED;
}
status = e2_ack_next(s, next_len + 1);
} else
s->eof = SANE_TRUE;
s->end = s->buf + buf_len;
s->ptr = s->buf;
}
return status;
}
/* XXXX use routine from sane-evolution */
typedef struct
{
unsigned char code;
unsigned char status;
unsigned char buf[4];
} EpsonDataRec;
/* XXX this routine is ugly and should be avoided */
static SANE_Status
read_info_block(Epson_Scanner * s, EpsonDataRec * result)
{
SANE_Status status;
unsigned char params[2];
retry:
e2_recv(s, result, s->block ? 6 : 4, &status);
if (status != SANE_STATUS_GOOD)
return status;
if (result->code != STX) {
DBG(1, "error: got %02x, expected STX\n", result->code);
return SANE_STATUS_INVAL;
}
/* XXX */
if (result->status & STATUS_FER) {
unsigned char *ext_status;
DBG(1, "fatal error, status = %02x\n", result->status);
if (s->retry_count > SANE_EPSON_MAX_RETRIES) {
DBG(1, "max retry count exceeded (%d)\n",
s->retry_count);
return SANE_STATUS_INVAL;
}
/* if the scanner is warming up, retry after a few secs */
status = esci_request_extended_status(s, &ext_status, NULL);
if (status != SANE_STATUS_GOOD)
return status;
if (ext_status[0] & EXT_STATUS_WU) {
free(ext_status);
sleep(5); /* for the next attempt */
DBG(1, "retrying ESC G - %d\n", ++(s->retry_count));
params[0] = ESC;
params[1] = s->hw->cmd->start_scanning;
e2_send(s, params, 2, 0, &status);
if (status != SANE_STATUS_GOOD)
return status;
goto retry;
} else
free(ext_status);
}
return status;
}
static SANE_Status
color_shuffle(SANE_Handle handle, int *new_length)
{
Epson_Scanner *s = (Epson_Scanner *) handle;
SANE_Byte *buf = s->buf;
int length = s->end - s->buf;
SANE_Byte *data_ptr; /* ptr to data to process */
SANE_Byte *data_end; /* ptr to end of processed data */
SANE_Byte *out_data_ptr; /* ptr to memory when writing data */
int i; /* loop counter */
/*
* It looks like we are dealing with a scanner that has an odd way
* of dealing with colors... The red and blue scan lines are shifted
* up or down by a certain number of lines relative to the green line.
*/
DBG(5, "%s\n", __func__);
/*
* Initialize the variables we are going to use for the
* copying of the data. data_ptr is the pointer to
* the currently worked on scan line. data_end is the
* end of the data area as calculated from adding *length
* to the start of data.
* out_data_ptr is used when writing out the processed data
* and always points to the beginning of the next line to
* write.
*/
data_ptr = out_data_ptr = buf;
data_end = data_ptr + length;
/*
* The image data is in *buf, we know that the buffer contains s->end - s->buf ( = length)
* bytes of data. The width of one line is in s->params.bytes_per_line
*
* The buffer area is supposed to have a number of full scan
* lines, let's test if this is the case.
*/
if (length % s->params.bytes_per_line != 0) {
DBG(1, "error in buffer size: %d / %d\n", length,
s->params.bytes_per_line);
return SANE_STATUS_INVAL;
}
while (data_ptr < data_end) {
SANE_Byte *source_ptr, *dest_ptr;
int loop;
/* copy the green information into the current line */
source_ptr = data_ptr + 1;
dest_ptr = s->line_buffer[s->color_shuffle_line] + 1;
for (i = 0; i < s->params.bytes_per_line / 3; i++) {
*dest_ptr = *source_ptr;
dest_ptr += 3;
source_ptr += 3;
}
/* copy the red information n lines back */
if (s->color_shuffle_line >= s->line_distance) {
source_ptr = data_ptr + 2;
dest_ptr =
s->line_buffer[s->color_shuffle_line -
s->line_distance] + 2;
/* while (source_ptr < s->line_buffer[s->color_shuffle_line] + s->params.bytes_per_line) */
for (loop = 0;
loop < s->params.bytes_per_line / 3;
loop++) {
*dest_ptr = *source_ptr;
dest_ptr += 3;
source_ptr += 3;
}
}
/* copy the blue information n lines forward */
source_ptr = data_ptr;
dest_ptr =
s->line_buffer[s->color_shuffle_line +
s->line_distance];
/* while (source_ptr < s->line_buffer[s->color_shuffle_line] + s->params.bytes_per_line) */
for (loop = 0; loop < s->params.bytes_per_line / 3;
loop++) {
*dest_ptr = *source_ptr;
dest_ptr += 3;
source_ptr += 3;
}
data_ptr += s->params.bytes_per_line;
if (s->color_shuffle_line == s->line_distance) {
/*
* We just finished the line in line_buffer[0] - write it to the
* output buffer and continue.
*
* The ouput buffer ist still "buf", but because we are
* only overwriting from the beginning of the memory area
* we are not interfering with the "still to shuffle" data
* in the same area.
*/
/*
* Strip the first and last n lines and limit to
*/
if ((s->current_output_line >=
s->line_distance)
&& (s->current_output_line <
s->params.lines + s->line_distance)) {
memcpy(out_data_ptr,
s->line_buffer[0],
s->params.bytes_per_line);
out_data_ptr +=
s->params.bytes_per_line;
s->lines_written++;
}
s->current_output_line++;
/*
* Now remove the 0-entry and move all other
* lines up by one. There are 2*line_distance + 1
* buffers, * therefore the loop has to run from 0
* to * 2*line_distance, and because we want to
* copy every n+1st entry to n the loop runs
* from - to 2*line_distance-1!
*/
free(s->line_buffer[0]);
for (i = 0; i < s->line_distance * 2; i++) {
s->line_buffer[i] =
s->line_buffer[i + 1];
}
/*
* and create one new buffer at the end
*/
s->line_buffer[s->line_distance * 2] =
malloc(s->params.bytes_per_line);
if (s->line_buffer[s->line_distance * 2] ==
NULL) {
DBG(1, "out of memory (line %d)\n",
__LINE__);
return SANE_STATUS_NO_MEM;
}
} else {
s->color_shuffle_line++; /* increase the buffer number */
}
}
/*
* At this time we've used up all the new data from the scanner, some of
* it is still in the line_buffers, but we are ready to return some of it
* to the front end software. To do so we have to adjust the size of the
* data area and the *new_length variable.
*/
*new_length = out_data_ptr - buf;
return SANE_STATUS_GOOD;
}
static inline int
get_color(int status)
{
switch ((status >> 2) & 0x03) {
case 1:
return 1;
case 2:
return 0;
case 3:
return 2;
default:
return 0; /* required to make the compiler happy */
}
}
SANE_Status
e2_block_read(struct Epson_Scanner *s)
{
SANE_Status status;
SANE_Bool reorder = SANE_FALSE;
SANE_Bool needStrangeReorder = SANE_FALSE;
START_READ:
DBG(18, "%s: begin\n", __func__);
if (s->ptr == s->end) {
EpsonDataRec result;
unsigned int buf_len;
if (s->eof) {
if (s->hw->color_shuffle) {
DBG(1,
"written %d lines after color shuffle\n",
s->lines_written);
DBG(1, "lines requested: %d\n",
s->params.lines);
}
return SANE_STATUS_EOF;
}
status = read_info_block(s, &result);
if (status != SANE_STATUS_GOOD) {
return status;
}
buf_len = result.buf[1] << 8 | result.buf[0];
buf_len *= (result.buf[3] << 8 | result.buf[2]);
DBG(18, "%s: buf len = %u\n", __func__, buf_len);
{
/* do we have to reorder the data ? */
if (get_color(result.status) == 0x01)
reorder = SANE_TRUE;
e2_recv(s, s->buf, buf_len, &status);
if (status != SANE_STATUS_GOOD) {
return status;
}
}
if (result.status & STATUS_AREA_END) {
DBG(1, "%s: EOF\n", __func__);
s->eof = SANE_TRUE;
} else {
if (s->canceling) {
e2_cancel(s);
return SANE_STATUS_CANCELLED;
} else {
status = e2_ack(s);
}
}
s->end = s->buf + buf_len;
s->ptr = s->buf;
/*
* if we have to re-order the color components (GRB->RGB) we
* are doing this here:
*/
/*
* Some scanners (e.g. the Perfection 1640 and GT-2200) seem
* to have the R and G channels swapped.
* The GT-8700 is the Asian version of the Perfection 1640.
* If the scanner name is one of these and the scan mode is
* RGB then swap the colors.
*/
needStrangeReorder =
(strstr(s->hw->model, "GT-2200") ||
((strstr(s->hw->model, "1640")
&& strstr(s->hw->model, "Perfection"))
|| strstr(s->hw->model, "GT-8700")))
&& s->params.format == SANE_FRAME_RGB;
/*
* Certain Perfection 1650 also need this re-ordering of the two
* color channels. These scanners are identified by the problem
* with the half vertical scanning area. When we corrected this,
* we also set the variable s->hw->need_color_reorder
*/
if (s->hw->need_color_reorder)
reorder = SANE_FALSE; /* reordering once is enough */
if (reorder && s->params.format == SANE_FRAME_RGB) {
SANE_Byte *ptr;
ptr = s->buf;
while (ptr < s->end) {
if (s->params.depth > 8) {
SANE_Byte tmp;
/* R->G G->R */
tmp = ptr[0];
ptr[0] = ptr[2]; /* first Byte G */
ptr[2] = tmp; /* first Byte R */
tmp = ptr[1];
ptr[1] = ptr[3]; /* second Byte G */
ptr[3] = tmp; /* second Byte R */
ptr += 6; /* go to next pixel */
} else {
/* R->G G->R */
SANE_Byte tmp;
tmp = ptr[0];
ptr[0] = ptr[1]; /* G */
ptr[1] = tmp; /* R */
/* B stays the same */
ptr += 3; /* go to next pixel */
}
}
}
/*
* Do the color_shuffle if everything else is correct - at this time
* most of the stuff is hardcoded for the Perfection 610
*/
if (s->hw->color_shuffle) {
int new_length = 0;
status = color_shuffle(s, &new_length);
/* XXX check status here */
/*
* If no bytes are returned, check if the scanner is already done, if so,
* we'll probably just return, but if there is more data to process get
* the next batch.
*/
if (new_length == 0 && s->end != s->ptr)
goto START_READ;
s->end = s->buf + new_length;
s->ptr = s->buf;
}
DBG(18, "%s: begin scan2\n", __func__);
}
DBG(18, "%s: end\n", __func__);
return SANE_STATUS_GOOD;
}