kopia lustrzana https://gitlab.com/sane-project/backends
3d89a6f880
create a place holder for low level commands move low level functions to genesys_low.c GL124 progresses enable genesys_low debug and add DAC for LiDE 110 gl124 WIP - gl847 cleanups - genesys_low refactor - gl124 starting version GL124 WIP - read scancnt/fedcnt,valid words coded - memory layout coded LiDE110 WIP GL 124 WIP - definition and use of get/set double/triple - define register names all mods done, ready to test set fe OK GL124 WIP : ready to test scans GL124 WIP GL124 WIP - fixed analog fe issue: don't put afe regs in global set GL124 : first light at 300 dpi GL124 WIP - 300 and 600 uncalibrated mostly ok (x coordinate rounding) - 150 and 75 OK x-wise, y to be solved solved rounding errors for gl124 re-add 400, 200 and 100 dpi modes GL124 : tous x dpi OK before adding line cropping GL124 : line cropping almost finished GL124 WIP : working line deletion compute step rework GL124 WIP : high speed table for dpi <= 300 move to scan area working line skipping fix new slope table for 600 dpi base geometry and movement tuned GL124 WIP : shading calibration almost working working 600 dpi shading GL124 : working shading calibration for all modes but 1200 dpi working 1200 dpi shading beta 1 of GL124 support last tuning update genesys.desc for LiDE 110 motor slope and start area tuning shading coefficient computing clean up add support for GL124 based CanoScan LiDE 110 feed almost OK up to 300 dpi feeding is fixed all issues fixed |
||
|---|---|---|
| .. | ||
| hotplug | ||
| hotplug-ng | ||
| openbsd | ||
| .gitignore | ||
| Makefile.am | ||
| Makefile.in | ||
| README | ||
| RenSaneDlls.cmd | ||
| check-po.awk | ||
| check-usb-chip.c | ||
| epson2usb.pl | ||
| gamma4scanimage.c | ||
| libtool-get-dll-ext | ||
| mustek600iin-off.c | ||
| sane-backends.pc.in | ||
| sane-config.in | ||
| sane-desc.c | ||
| sane-find-scanner.c | ||
| umax_pp.c | ||
| xerox | ||
README
2006-05-10
This directory contains various tools that may be useful:
hotplug/:
Linux hotplug script and an automatically generated config file
(libsane.usermap) used to change the permissions on the libusb "device
nodes" in /proc/bus/usb/ when a scanner is plugged in. For newer Linux
kernels, you may need to use udev instead. Please read the README file
in this directory for instructions.
hotplug-ng/:
Linux hotplug-ng script and an automatically generated config file
(libsane.db) used to change the permissions on the libusb "device nodes"
in /proc/bus/usb/ when a scanner is plugged in. For newer Linux kernels,
you may need to use udev instead. Please read the README file in this
directory for instructions.
udev/:
Contains a automatically generated udev rules file. udev now replaces
hotplug and provides all the functionalities of hotplug. libusb 0.1.12
or newer is necessary.
openbsd/:
Contains example scripts for hotplugd(8) for USB scanners accessed via
libusb.
sane-find-scanner:
Attempts to find a SCSI scanner attached to your system.
Invoke with "sane-find-scanner -h" to get command-line
syntax. More details can be found in the man page
sane-find-scanner(1).
xerox:
A simple script to make photocopies ("xeroxing"). In
the script, you may need to adjust the device name
assigned to variable DEV and the resolution assigned
to variable RES as well as the paper with and height
(variables WIDTH and HEIGHT, respectively.
mustek600iin-off:
Allows you to turn off a Mustek 600 II N scanner.
Use "make mustek600iin-off" to compile.
umax_pp:
Command line utility to scan on UMAX astra 1220P,
1600P and 2000P, without using the backend. So that
scanner protocol can be tested directly.
gamma4scanimage: Creates a gamma table in the format expected by scanimage.
You can define a gamma value, shadow and highlight.
Take a look at manual page gamma4scanimage for further information.
RenSaneDlls.cmd: Convert backend-DLL-filenames according to 8.3 naming
convention necessary for DLLs on OS/2.
Maybe useful for SANE developers:
sane-config:
Show SANE version, linker flags etc. Might be useful for
frontend developers.
sane-desc:
Generate SANE webpages (and ASCII lists) from backend .desc files.
Run "sane-desc --help" for details. The default lists are generated
in doc/Makefile.
check-po.awk:
Print untranslated and fuzzy messages and their line numbers in the
source code and po file. Example:
cd po/ ; ../tools/check-po.awk sane-backends.de.po
You may need to adjust the path of awk in the first line of the
script. More documentation is in the script itself.