sane-project-backends/doc/sane-fujitsu.man

183 wiersze
5.4 KiB
Groff

.TH sane-fujitsu 5 "17 Apr 2002" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
.IX sane-fujitsu
.IX sane-fcpa
.IX sane-m3096g
.SH NAME
sane-fujitsu \- SANE backend for Fujitsu flatbed and ADF scanners
.SH DESCRIPTION
The
.B sane-fujitsu
library implements a SANE (Scanner Access Now Easy) backend which
provides access to Fujitsu flatbed and ADF scanners.
At present, the following
scanners are known to work with this backend:
.PP
.RS
.ft CR
.nf
Vendor: Model: Rev:
-------- ---------------- -----
FUJITSU M3096Gm 02
FUJITSU M3093GX
FUJITSU M3093GD
FUJITSU M4097
FUJITSU fi-4220C
FUJITSU fi-4340C
FUJITSU M3091DCd BF21
FUJITSU M3092DCd
.fi
.ft R
.RE
.P
The driver supports lineart, halftone, grayscale, and color
(3091 and 3092) scanning depending on hardware capabiliites.
The "Fujitsu" driver is a first attempt at integrating support
for all Fujitsu scanners \- previously available as different
single drivers \- in one driver. At present, the M3091DCd
is working (lineart, halftone, 8-bit grayscale and 24-bit color,
simplex and duplex), and the driver should also support the
M3096 as the M3096g driver code has been incorporated.
This driver supersedes the old "m3091"/"fujitsu" drivers and
the old "m3096g" driver.
Other scanners in these families may work.
The ScanPartner 15C seems to be a repackaging
of the ScanPartner 600C, but I don't know if it works.
Look at the sp15c backend for this scanner.
Perusal of the M3096GX/M3093GX/M3093DG manual
suggests the M3096G driver offers access to a
subset of the new scanners.
People are encouraged to try these driver with the other scanners
and to contact the author with test results.
.SH DUPLEX MODE
The M3091 driver supports duplex scanning. To the front-end, a duplex
scan looks very much like scanning two separate pages from the document
feeder, i.e. the SANE front-end receives two images instead of one.
Front-ends which are not capable of dealing with that \- e.g. the
command-line tool scanimage \- cannot be used for duplex scanning.
If you want to do duplex scans from the command line, get Tom
Martone's scanadf program from
http://www.martoneconsulting.com/sane-scanadf.html.
.SH CONFIGURATION
A modest effort has been made to expose the standard options to the API.
This allows frontends such as xscanimage to set scanning region,
resolution, bit-depth (and color), and enable the automatic document feeder.
.br
The "Fujitsu" driver supports the following options:
.br
mode m
.RS
.I m
may be one of "Color", "Lineart", "Halftone", or "Gray", dependent on the
scanner model. It is advisable to specify this option first when using
command line tools, as the validity of some of the other options depends
on the mode setting.
.RE
.PP
x, y
.RS
Scan width and height
.RE
.PP
pagewidth, pageheight
.RS
Page size; when using the ADF, the driver will assume that a page of the
given width is centered
.RE
.PP
resolution, y-resolution
.RS
Controls scan resolution. Permissible values dependent on model and scan mode;
setting --resolution also sets --y-resolution but not vice versa. This makes
it possible to set the 3091's maximum resolution of 300x600dpi.
.RE
.PP
brightness b
.RS
Only supported for M3096
.RE
.PP
threshold t
.RS
Only supported for M3096
.RE
.PP
duplex d
.RS
.I d
may be "front", "back", or "both" and denotes which sides of the page
are to be scanned (duplex scanner only for example 3091, 3093Gd).
.RE
.PP
lampcolor c
.RS
.I c
may be "red", "green", "blue", or "default" \- the lamp color to be used
when doing graysacale or b/w scans on the M3091.
.RE
.PP
blueoffset, greenoffset
.RS
Color justification options for the M3091; anything other than +1/-1 will
probably distort the image. Should be left alone unless your scanner is
buggy.
.RE
.PP
swapfile
.RS
boolean option for the M3091. Only affects duplex scans. If set, a swap
file will be used for storing the rear side of a document as it is scanned;
otherwise the whole page will be kept in memory.
.RE
.br
You may specify the line "forceModel=xxx"
in the configuration file to make the driver treat your scanner as an
"xxx" scanner (currently supported: 3096, 3091). Use this if you have
another scanner that is not automatically detected as being compatible.
.br
The only other configuration option supported is "scsi-buf-size=xxx",
allowing you to set the SCSI buffer size to something other than the
compiled-in default. Especially with the M3091 scanner, some users
had the problem that the scanner would "hang" mid-page, and this can
often be alleviated by using "scsi-buf-size=32768".
.SH "SEE ALSO"
sane(7),
sane-scsi(5),
sane-sp15c(5)
sane-usb(5),
.br
Fujitsu ScanPartner 15C OEM Manual, Doc. No. 250-0081-0
.br
Fujitsu M3096G OEM Manual, part number 50FH5028E-05
.br
Fujitsu M3096GX/M3093GX/M3093DG OEM Manual, part number C150-E015...03
.SH AUTHOR
3096/SP15 drivers: Randolph Bentson
<bentson@holmsjoen.com>,
with credit to the unnamed author of the coolscan driver
.br
3091 driver: Frederik Ramm <frederik@remote.org>
3093GD,fi-4340C, ipc and cmp options: Oliver Schirrmeister <oschirr@abm.de>
3092 patch: Mario Goppold <mgoppold@tbzpariv.tcc-chemnitz.de>
fi-4220C patch and USB support: Ronald B. Cemer <ron@roncemer.com>
.SH LIMITATIONS
Only tested with Linux 2.4
.SH BUGS
I'm sure there are plenty, and not too well hidden,
but I haven't seen them yet.
I don't know if the ScanPartner 15C still works, because I'm not able
to test it.
3091/3092 don't support halftone