sane-project-backends/doc/sane-nec.man

60 wiersze
1.5 KiB
Groff

.TH sane-nec 5 "17 Feb 2000" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
.IX sane-nec
.SH NAME
sane-nec \- SANE backend for NEC scanners
.SH DESCRIPTION
The
.B sane-nec
library implements a SANE (Scanner Access Now Easy) backend that
provides access to NEC SCSI scanners. This backend should be
considered
.B alpha-quality
software! In the current state it is known to work with PC-IN500/4C
scanners. Another MultiReader scanner series is not supported. PC-IN
500/4C and MultiReader scanner are only sold in Japan.(except Multi
Reader PetiScan.)
For other scanners, it may or may not work.
.PP
The backend has the following known problems:
.RS
\- ColorLineart mode is not supported.
.br
\- device name is fixed to /dev/scanner
.RE
.PP
At present,
the following scanners are known to work with this backend.
.RS
.ft CR
.nf
Vendor Product id
------ -----------
NEC PC-IN500/4C
.fi
.ft R
.RE
.SH FILES
.TP
.I @CONFIGDIR@/nec.conf
The backend configuration file.
.TP
.I @LIBDIR@/libsane-nec.a
The static library implementing this backend.
.TP
.I @LIBDIR@/libsane-nec.so
The shared library implementing this backend (present on systems that
support dynamic loading).
.SH ENVIRONMENT
.TP
.B SANE_DEBUG_NEC
If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend. E.g.,
a value of 128 requests all debug output to be printed. Smaller
levels reduce verbosity.
.SH "SEE ALSO"
sane(7), sane-scsi(5)
.SH AUTHORS
Kazuya Fukuda