kopia lustrzana https://gitlab.com/sane-project/backends
37 wiersze
1.3 KiB
Plaintext
37 wiersze
1.3 KiB
Plaintext
SANE and FreeBSD
|
|
----------------
|
|
|
|
Building:
|
|
---------
|
|
Don't forget to use GNU make (gmake). E.g. "MAKE=gmake ./configure".
|
|
SANE should compile and install out-of-the-box.
|
|
|
|
SCSI-scanners:
|
|
--------------
|
|
If the SCSI host adapter is supported, there are no known problems.
|
|
|
|
USB-scanners:
|
|
-------------
|
|
USB-Scanners are supported by FreeBSD. The USB scanner driver "uscanner" and
|
|
access over libusb can be used.
|
|
|
|
To get your scanner detected by the uscanner driver, it may be necessary to
|
|
add its vendor and device ids to the kernel and recompile. Use MAKEDEV to
|
|
generate the /dev/uscanner* files if they are not already there. Use
|
|
sane-find-scanner to find your scanner and edit your backend's configuration
|
|
file appropriately.
|
|
|
|
If you want to use libusb, your scanner should *not* be claimed by the
|
|
uscanner driver. Make sure, that /dev/ugen* and /dev/usb* devices are
|
|
available. Use /dev/MAKEDEV to create them, if necessary.
|
|
|
|
For some backends you must use libusb. The uscanner driver won't work because
|
|
automatic detection, control messages, or interrupt endpoints are needed.
|
|
|
|
Parport-scanners:
|
|
-----------------
|
|
I don't have much information about these. The Mustek 600 II N scanner seems to work, others may or may not work. Please contact me or the SANE mailing
|
|
list if you succeeded in using a parport scanner.
|
|
|
|
2002-07-14 Henning Meier-Geinitz <henning@meier-geinitz.de>
|