sane-project-backends/ChangeLog-1.0.5

1195 wiersze
47 KiB
Groff

2001-07-01 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
************************ end of code freeze ***********************************
************************ Release of sane-backends 1.0.5 **********************
2001-06-30 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure configure.in: Disabled warnings by default.
* NEWS: Updated version numbers, added dc25.
2001-06-25 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
* configure.in/configure: changed version to 1.0.5
2001-06-25 ********** CODE FREEZE FOR SANE-1.0.5
snapshot sane-backends-pre1-1.0.5
planned release on 2001-07-01
2001-06-24 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
* backend/umax*: bugfixes:
* bugfix for DOR:
- bottom-right edge keeps in position if possible when DOR is switched on
* bugfix for Astra 610S color mode:
- scale_y is set to 0.5 if y_resolutions is smaller than optical_res/2
this does fix the color scan problems for Astra 610S.
Not tested for Astra 600S.
2001-06-20 Peter Fales <peter@fales.com>
* backend/dc25.c - Backed out the previously added mkdtemp()
patch, as mkdtemp is not available on all platforms.
* TODO: Removed entry about dc25 bug
2001-06-20 Henning Meier-Geinitz <henning@meier-geinitz.de>
* TODO: Updated documentation entries. Added compilation bug in dc25.c.
2001-06-20 Stéphane Voltz <svoltz@wanadoo.fr>
* doc/sane-umax_pp.man: corrections according to the TODO list
--- cvs snapshot-2001-06-17 ---
2001-06-17 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
* backend/umax*: bugfixes:
- removed "#include <assert.h>" from umax.c: assert() is never called
- bugfix for 3 pass scanning:
reposition_scanner is called in sane_start for 2nd and 3rd pass of 3 pass scan
- bugfix for UTA and DOR geometry offsets
2001-06-14 Peter Fales <peter@fales.com>
* backend/dc25.c - Added a patch from Tim Waugh to use mkdtemp()
instead of mktemp(). Also cleaned up some compiler warnings.
2001-06-14 Karl Heinz Kremer <khk@khk.net>
* doc/sane-epson.man: Removed reference to sane-devel list
2001-06-14 Simon Munton <simon@munton.demon.co.uk>
* doc/sane-pie.man: Fixed formatting problems
2001-06-14 Gerhard Jaeger <g.jaeger@earthling.net>
* doc/sane-plustek.man:
Corrected URL to Plustek mailing list
2001-06-14 Henning Meier-Geinitz <henning@meier-geinitz.de>
* TODO: Added link to libieee1284.
2001-06-13 Karl Heinz Kremer <khk@khk.net>
* backend/epson.desc: Added GT-9500 (same scanner as Expression 636)
* backend/epson.c: Finally updated version #
2001-06-13 Henning Meier-Geinitz <henning@meier-geinitz.de>
* TODO: Updated the entries about documentation.
2001-06-13 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
* sanei/sanei-scsi.c: Corrected bug in sanei_scsi_cmd2 for IRIX:
- scsi_req.ds_senselen has been set to sizeof pointer, is set
to 128 bytes now (1024 bytes does not work)
- sensebuf is cleared before scsi command is executed
- sensehandle always called when it exists and an error occurs
2001-06-11 Henning Meier-Geinitz <henning@meier-geinitz.de>
* tools/umax_pp.c: Also use sanei_umax_pp_SetLamp() (patch from
Tim Waugh <twaugh@redhat.com>).
2001-06-11 Stéphane Voltz <svoltz@wanadoo.fr>
* backend/umax_pp_low.c backend/umax_pp_low.h backend/umax_pp_mid.c:
make use of PPGETMODES only when available in ppdev.h. Corrected OS/2
typo in Outb() and rename sanei_umax_pp_Lamp() to
sanei_umax_pp_SetLamp().
2001-06-05 Peter Fales <peter@fales.com>
* backend/doc/sane-dc25.man, sane-dc210.man, sane-dc240.man -
Added reference to web page for information about sane
mailing list
2001-06-10 Jochen Eisinger <jochen.eisinger@gmx.net>
* doc/sane-mustek_pp.man: added pointer and note to list
subscription page
--- cvs snapshot-2001-06-10 ---
2001-06-10 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/sane-artec.man doc/sane-coolscan.man doc/sane-umax.man:
Fixed whatis/apropos output (don't put an empty line after
the NAME section). Added SEE ALSO entry to sane(7).
* doc/sane-dll.man: Fixed output bug and added SEE ALSO entry.
* doc/sane-scsi.man: Rephrased the paragraphs about Linux sg
buffer to make it clear, that kernel changes are really only
necessary with older kernels. Fixed torque.net URL. Added comment,
that usually every SCSI adapter should work. Added paragraph about
problems with Acard adapters. Rephrased NCR810 entry.
* doc/sane-net.man: Updated BUGS section. Added SEE ALSO.
* doc/saned.man doc/sane-abaton.man doc/sane-agfafocus.man
doc/sane-apple.man doc/sane-as6e.man doc/sane-avision.man
doc/sane-bh.man doc/sane-dc210.man doc/sane-dc240.man
doc/sane-dc25.man doc/sane-dmc.man doc/sane-epson.man
doc/sane-fujitsu.man doc/sane-hp.man doc/sane-microtek.man
doc/sane-mustek_pp.man doc/sane-nec.man doc/sane-pie.man
doc/sane-pint.man doc/sane-plustek.man doc/sane-pnm.man
doc/sane-qcam.man doc/sane-ricoh.man doc/sane-s9036.man
doc/sane-sharp.man doc/sane-sm3600.man doc/sane-st400.man
doc/sane-tamarack.man doc/sane-umax_pp.man doc/sane-v4l.man:
Added SEE ALSO entry for sane(7).
* doc/sane-coolscan.man: Used @@ macros instead of fixed paths.
* doc/sane-dc210.man doc/sane-dc240.man doc/sane-dc25.man:
Used @@ macros instead of fixed paths. Fixed library paths.
* doc/Makefile.in doc/sane-coolscan.man doc/sane-dc210.man
doc/sane-dc240.man doc/sane-dc25.man: Set the correct library
path for all backends by changing @LIBDIR@ to $(libdir)/sane.
* doc/sane-as6e.man doc/sane-canon.man doc/sane-microtek.man
doc/sane-microtek2.man: Some minor formatting issues.
* doc/sane-mustek.man doc/sane-v4l.man: Added link to mostang mail
page. Fixed some formatting issues.
* doc/backend-writing.txt: Added paragraph about @LIBDIR@ and friends
in manual pages.
* TODO: Added several entries about manual pages. Removed entry about
sane(7).
2001-06-09 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
* sanei/sanei_scsi.c:
applied patch by Douglas Gilbert <dgilbert@interlog.com>
that solves compilation problem about:
storage size of `ssid' isn't known
2001-06-09 Karl Heinz Kremer <khk@khk.net>
* backend/epson.c: Changed debug level for for an informational
message in the sense_handler from 0 to 2.
2001-06-09 Henning Meier-Geinitz <henning@meier-geinitz.de>
* README.os2: Added link to Franz Bakan's web page.
* configure configure.in backend/Makefile.in include/sane/config.h.in:
Check for sys/sem.h and disable snapscan if it isn't available.
Removed "//" (C++-style comment) from config.h.in. Link to djpeg
only once.
* TODO: Added comment on command line option for timeout in saned.
2001-06-09 Petter Reinholdtsen <pere@td.org.uit.no>
* acinclude.m4 include/sane/config.h.in: Fix configure/compile
problem on Alpha/Tru64 Unix.
2001-06-07 Stéphane Voltz <svoltz@wanadoo.fr>
* backend/umax_pp_low.c: make use of PPGETMODES to get ppdev
capabilites.
2001-06-05 Peter Fales <peter@fales.com>
* backend/dc240.c - Fixed bug where attempting to change the
"image number" in an empty camera causes a core dump.
2001-06-06 Stéphane Voltz <svoltz@wanadoo.fr>
* backend/umax_pp_low.c: OS/2 compile fixes (again). Backend
successfully built on Warp with EMX 0.9d.
2001-06-06 Stéphane Voltz <svoltz@wanadoo.fr>
* backend/umax_pp_low.c: OS/2 compile fixes
2001-06-05 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
* changed my email address in sane-backends.lsm
--- feature freeze for sane-1.0.5 is active ---
--- cvs snapshot-2001-06-05 ---
2001-06-04 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
* update of umax backend to version 1.0 buid 27
2001-06-04 Henning Meier-Geinitz <henning@meier-geinitz.de>
* TODO: Updated the entries concerning net+saned. Removed the
exporting symbols entry. Added entry about lassert.h.
* include/lassert.h sanei/sanei_scsi.c: Use local assert.h file to
fix problems with AIX and shared libraries.
* frontend/test.c: Changed order of headers to get test.c compiling
on OS/2.
* frontend/.cvsignore: Added test.
* frontend/saned.c: Increase timeout to one hour.
* backend/coolscan.c: Declared all internal functions static.
* tools/Makefile.in: Fixed typo that prevented make from removing
mustek600iin-off.
* sanei/sanei_scsi.c: Fixed some small bugs concerning error reporting.
* frontend/scanimage.c: Fixed small bug in output for batch mode.
2001-06-03 Peter Fales <peter@fales.com>
* backend/dc240.c - Batch scanning of multiple images with scanimage
was failing if subsequent images have a different size than
from the first image.
2001-06-03 Karl Heinz Kremer <khk@khk.net>
* doc/sane-epson.man: Updated documentation
2001-06-03 Stéphane Voltz <svoltz@wanadoo.fr>
* backend/umax_pp_low.c: Fixed compile problem on archs that
have inb/outb and not insb/outsb. Cleaned up and simplified probing
code.
2001-06-03 Peter Fales <peter@fales.com>
* backend/dc240.c - Add "auto increment" option to allow all
images to be downloaded with the --batch option to scanimage.
2001-06-03 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/mustek.c: Added some debug messages.
* backend/net.c: Fixed yet another segfault. Added debug messages.
* frontend/scanimage.c doc/scanimage.man: Added more options for
batch-scanning (patch from Caskey Dickson
<caskey-lists-sane-devel@technocage.com>).
2001-06-02 Chris Pinkham <cpinkham@infi.net>
* backend/artec.desc: updated version number to match artec.c.
2001-06-02 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
* corrected umax version numver in umax.desc (1.0.24->1.0.26)
2001-06-02 Henning Meier-Geinitz <henning@meier-geinitz.de>
* NEWS: Updated concerning backend versions.
* TODO: Removed nec entries. Added entry about ADF extension to
scanimage.
* backend/qcam.c: Another occurence where struct flock must be defined
for OS/2.
* AUTHORS: Fixed Kazuya Fukuda's name and email address.
* backend/nec.c backend/nec.h backend/nec.desc: Update to backend
version 0.12 (from Kazuya Fukuda <kazuya@pjs.nevt.nec.co.jp>).
Removed references to sharp backend (grep for "JX"). Check for
HAVE_SYS_SHM_H before including sys/shm.h and disable shared
memory support if necessary. Free devlist allocated in
sane_get_devices() in sane_exit() resolution setting bug fixed
(PC-IN500/4C 10dpi step). Removed resolution list.
2001-06-02 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
* changed minimum scsi buffer size from 64KB to 32KB
2001-06-01 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/umax_pp_low.c: Fixed the FreeBSD problems by checking
/dev/io before accessing io ports (patch from Stéphane Voltz
<svoltz@wanadoo.fr>).
* backend/snapscan.c: Fixed two bugs: pss->devname must be checked
for 0. Return total number of lines in sane_get_parameters (patch
from Ben Stanley <bds02@uow.edu.au>).
2001-05-31 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/mustek.c: Updated some comments.
* TODO: Removed the entry about the config_line[len-1] bug.
* configure configure.in include/sane/config.h.in backend/qcam.c:
Check for struct flock and define it if necessary.
* tools/Makefile.in: Make sure that backend/umax_pp_low.o exists
when umax_pp.o is linked.
* backend/bh.c backend/m3096g.c backend/sp15c.c: Fixed
config_line[len-1] bug which could generate an access violation
if len==0.
* lib/alloca.c lib/getnev.c lib/getopt.c lib/getopt1.c
lib/isfdtype.c lib/md5.c lib sigprocmask.c lib/snprintf.c lib
strdup.c lib/strndup.c lib/strsep.c lib/usleep.c lib/vsyslog.c:
Used #include "../include/sane/config.h".
* sanei/sanei_scsi.c: Fixed compilation issue for OS/2 in
sanei_scsi_find_devices.
--- cvs snapshot-2001-05-30 ---
2001-05-30 Marian Eichholz <marian@freenet-ag.de>
* backend sm3600 with better gain calibration incorporated.
fixed a superfluceous export.
2001-05-30 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
* Problem with SOLARIS_INTERFACE (change from 2001-05-27)
had an other reason than the scsi buffer size (MAX_DATA).
Changed scsi buffer size for solaris sg driver
(USE == SOLARIS_INTERFACE in sanei_scsi.c) again from 32 KB
to 128KB.
2001-05-30 Henning Meier-Geinitz <henning@meier-geinitz.de>
* tools/Makefile.in: Fixed umax_pp compilation problem with Solaris
and other operating systems.
2001-05-29 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/canon.conf doc/sane-canon.man: Added config file and some
documentation for it.
* AUTHORS: Added Chris Bagwell and Oliver Schwartz for snapscan.
* TODO: Added entry about possible sanei_usb.*.
2001-05-29 Peter Fales <peter@fales.com>
* backend/dc240.c - Fixed a fairly obscure problem that can result in
core dump. (Deleting pictures with gphoto, then launching
xscanimage without power cycling the camera left bad data in the
camera status table.)
2001-05-29 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
* added entry about sanei_parport in TODO
2001-05-27 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/releases.txt: Removed comment about net.* and dll.* version
updating. Added info about make install-mostang.
* TODO: Updated concerning backend bugs (export and config_line).
* backend/umax_pp_low.c: Fixed bus error with FreeBSD.
2001-05-27 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
* changed scsi buffer size for solaris sg driver
(USE == SOLARIS_INTERFACE in sanei_scsi.c) to 32 KB
again because it does not work for at least one system
with 64KB.
2001-05-27 Petter Reinholdtsen <pere@td.org.uit.no>
* doc/releases.txt: Added points on tagging the source and
generating a diff from the last release.
--- cvs snapshot-2001-05-27 ---
2001-05-27 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
* sanei/sanei_scsi.c: changed scsi buffer size (MAX_DATA)
to 128KB for: SOLARIS_INTERFACE, SOLARIS_SG_INTERFACE,
SOLARIS_USCSI_INTERFACE and IRIX_INTERFACE
(some scanners have problems with the predefined 32KB
buffer size, these systems should work with 128KB
but we need to test if no problems do occur).
2001-05-27 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/sane-microtek2.man: Include updates from backend version 0.9
(from karsten.festag@t-online.de (Karsten Festag)).
* backend/sm3600.c: setResolutions has only 5 instead of 6 resolutions.
2001-05-26 Jochen Eisinger <jochen.eisinger@gmx.net>
* backend/mustek_pp.c: declared function comp() static
* TODO: removed entry regarding this problem
2001-05-26 Chris Pinkham <cpinkham@infi.net>
* backend/artec.c: Added code in sane_exit() to free memory
malloced in sane_get_devices(). Declared several functions
'static' so they are not exported.
* TODO: removed 'artec' backend from list mentioned in describing
above problems.
2001-05-26 Petter Reinholdtsen <pere@td.org.uit.no>
* TODO: Updated entry on library search path, sanei API
documentation and sane_init() return value.
* Makefile.in:New target 'libcheck' making sure libraries export
only sane_* and sanei_* symbols.
2001-05-26 Henning Meier-Geinitz <henning@meier-geinitz.de>
* TODO: Removed snapscan and microtek2 updates. Removed status change of
as6e. Removed True64 Unix and HP/UX compilation problems. Added entry
about exporting symbols. Reformatted some entries.
* backend/microtek2.c backend/microtek2.desc backend/microtek2.h:
Updated to version 0.9 (from Karsten Festag
<karsten.festag@t-online.de>).
* doc/sane-snapscan.man: Added new scanners and authors.
* AUTHORS: Added Sebastien Sable and Henrik Johansson.
* backend/snapscan-scsi.c backend/snapscan-sources.c
backend/snapscan-sources.h backend/snapscan-usb.c
backend/snapscan-usb.h backend/snapscan.c backend/snapscan.conf
backend/snapscan.desc backend/snapscan.h: Updated snapscan backend to
version 1.2 (from Sebastien Sable <Sebastien.Sable@snv.jussieu.fr>).
* doc/backend-writing.txt: Added "make libcheck" info.
* backend/sm3600-color.c backend/sm3600-gray.c backend/sm3600-homerun.c
backend/sm3600-scanmtek.c backend/sm3600-scanusb.c
backend/sm3600-scanutil.c backend/sm3600.c backend/sm3600.h:
Made all non-sane-api functions static. Fixed some warnings.
* backend/sm3600.desc: Changed status to new.
* backend/as6e.desc: Changed status to alpha because backend
isn't new any more.
* acinclude.m4 aclocal.m4 configure configure.in
include/sane/config.h.in: Fixed u_int* bug for Tru64 by
including sys/bitypes.h.
* PROJECTS: Added hpoj project.
2001-05-25 Jochen Eisinger <jochen.eisinger@gmx.net>
* doc/sane-mustek_pp.man, backend/mustek_pp.desc: Changed URL
of the homepage to home.nexgo.de/jochen.eisinger/sane/
2001-05-25 Karl Heinz Kremer <khk@khk.net>
* backend/epson.c: Allow more than 8 bit color depth even for
preview mode since Xsane can handle this. Some code cleanup.
Removed ancient code that was used to determine the resolution
back when the backend still had a slider for the resolution
selection.
* backend/epson.desc: Updated version number, added new scanners.
2001-05-24 Henning Meier-Geinitz <henning@meier-geinitz.de>
* sane-mustek.man: Removed some bug descriptions and addded
sane(7) to SEE ALSO.
* sane-find-scanner.man sane-scsi.man scanimage.man: Added
sane(7) to SEE ALSO.
* PROJECTS: Removed entry about Polaroid SprintScan 35LE (now in
microtek).
* TODO: Removed umax from lists of backends with sane_get_devices
and config_line bug. Removed entry about make uninstall and
sanei_wire.c bug. Removed entry about microtek update. Added point
about adding sane(7) to any manual page.
2001-05-23 Matto Marjanovic <maddog@yoo-hoo.ai.mit.edu>
* backend/microtek.c backend/microtek.h:
o Added support for Agfa StudioStar (weird pixel packing)
o A couple of small fixes (missing 'static' declarations)
o Upped version to 0.12.3
2001-05-23 Matto Marjanovic <maddog@yoo-hoo.ai.mit.edu>
* backend/microtek.c backend/microtek.h: Small fixes:
o Use 'expanded contrast/exposure settings' inquiry data to
dynamically set ranges for those options.
o Patches for Polaroid SprintScan 35LE (from Dick Bruijn)
- added "Polaroid" vendor string
- screwed around with 'brightness' setting
- attached 'negative scan' button
o sane_exit() now frees the devlist allocated by sane_get_devices()
o upped version to 0.12.2
2001-05-23 Stéphane Voltz <svoltz@wanadoo.fr>
* backend/umax_pp.c: changed option names to use lower case characters
and dashes instead of spaces.
* backend/umax_pp_low.c: commented out a useless command sequence.
Added 55 AA pattern escaping in data block sending.
2001-05-22 Karl Heinz Kremer <khk@khk.net>
* backend/epson.c: Added sense handler to support the GT-8000 scanner.
Also added experimental (and #ifdef protected) USB scanner probing
code - requires patch to USB scanner driver.
2001-05-21 Henning Meier-Geinitz <henning@meier-geinitz.de>
* README: Added "man sane" to quick install. Added paragraph about
old versions. Added paragraph about "make clean" and "make
distclean". Added section about removing SANE.
* Makefile.in backend/Makefile.in doc/Makefile.in lib/Makefile.in
sanei/Makefile.in tools/Makefile.in: Added target "uninstall".
2001-05-20 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
* removed a bug in saned (patch by Matthias Trute <mtrute@topmail.de>)
calculation of the reader buffer index was not correct:
if (reader >= sizeof (buf))
- reader = 0;
+ reader -= sizeof(buf);
2001-05-19 Karl Heinz Kremer <khk@khk.net>
* backend/epson.c: fixed dates in change log entries
and finally fixed the TPU bug with older scanners
2001-05-17 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
* removed bug in umax backend sane_exit
2001-05-17 Henning Meier-Geinitz <henning@meier-geinitz.de>
* include/lalloca.h: Used a more suitable comment.
* doc/backend-writing.txt: Reformated. Added point about headers
and libraries that are not available on every system and inclusion
of backends into CVS. Some minor fixes and clarifications.
* NEWS: Updated concerning sane man page and new backends.
2001-05-17 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
* updated umax backend to version 1.0 build 26
2001-05-15 Peter Fales <peter@fales.com>
* backend/dc25.c, backend/dc240.c - Added DBG(1,..) to print
version string
2001-05-16 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/.cvsignore: Added sane-sm3600.5.
* PROJECTS: Removed sm3600.
* TODO: Updates concerning memory leaks and access violations.
* AUTHORS doc/Makefile.in: doc/sane-sm3600.man doc/sane.man: Updated
documentation concerning sm3600 backend and added man page (from
from Marian Eichholz <eichholz@computer.org>).
* configure configure.in include/sane/config.h.in: Detect presence
of libusb and enable sm3600 backend.
* backend/Makefile.in backend/dll.c backend/sm3600-color.c
backend/sm3600-homerun.c backend/sm3600-scantool.h
backend/sm3600-scanutil.c backend/sm3600.desc
backend/sm3600-gray.c backend/sm3600-scanmtek.c
backend/sm3600-scanusb.c backend/sm3600.c backend/sm3600.h:
Added sm3600 backend (from Marian Eichholz <eichholz@computer.org>).
2001-05-16 Chris Pinkham <cpinkham@infi.net>
* backend/artec.c: changed #include to use "../include/sane/config.h"
instead of "sane/config.h".
2001-05-16 Stéphane Voltz <svoltz@wanadoo.fr>
* backend/umax_pp.c: fix memory leak in sane_exit
* backend/umax_pp_low.c backend/umax_pp_low.h : added /proc parsing
when available to get I/O addr. Added pauses in 610P probe
sequence.
2001-05-14 Henning Meier-Geinitz <henning@meier-geinitz.de>
* frontend/scanimage.c: scanimage_exit: use the handle (not its
address) for sane_close. Fixed yet another warning.
2001-05-14 Gerhard Jaeger <g.jaeger@earthling.net>
* backend/plustek.c:
Free memory malloced in sane_get_devices() in sane_exit()
2001-05-14 Petter Reinholdtsen <pere@td.org.uit.no>
* backend/lhii.desc: Updated with current version and contact
information.
* frontend/scanimage.c tools/sane-find-scanner.c: Remove some
compiler warnings.
2001-05-13 Peter Fales <peter@fales.com>
* backend/dc25.c: Remove DBG(0,...) line that was getting printed
for non-dc25 users.
2001-05-13 Karl Heinz Kremer <khk@khk.net>
* backend/epson.c: Removed check for '\n' before end of line
Free memory malloced in sane_get_devices() in sane_exit() again
Check first if the scanner does support the set film type
and set focus position before the GUI elements are displayed.
This caused problems with older (B4 level) scanners when a TPU
was connected.
2001-05-13 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/sane.man: Added path to sane.ps. Added comments about
how somebody can help the SANE project. Added comments about
possible problems with old installaitions of SANE and
/etc/ld.so.conf. Added section "REPORTING BUGS".
* tools/Makefile.in tools/.cvsignore: Added mustek600iin-off.
* sanei/sanei_codec_ascii.c tools/mustek600iin-off.c
tools/sane-find-scanner.c frontend/stiff.c: Used #include
"../include/sane/...".
* backend/net.c backend/net.h backend/net.desc: Fixed some memory
leaks. A bit of reformating. Added more debug output. Used
#include "../include/sane/...".
* sanei_codec_bin.c sanei/sanei_net.c sanei/sanei_wire.c: Fixed
some memory leaks. Used #include "../include/sane/...".
* frontend/scanimage.c: Added exit handler to call sane_close
and sane_exit in any case and to free alloced memory. A bit of
reformating. Used #include "../include/sane/...". Fixed some
warnings.
* frontend/saned.c: Fixed some memory leaks. Fixed some warnings.
Some reformating. Used #include "../include/sane/...".
* README.hp-ux: Use gmake if make doesn't work.
* LEVEL2: Added point about sane_init results != SANE_STATUS_GOOD.
* TODO: Added entries about memory leaks, sane_init return values, and
HP-UX problems in isfdtype.c.
2001-05-11 Jochen Eisinger <jochen.eisinger@gmx.de>
* TODO, backend/mustek_pp.c: fixed line-end handling, removed entry
from TODO list
2001-05-11 Henning Meier-Geinitz <henning@meier-geinitz.de>
* TODO: Removed pie from lists of bugs. Removed sane manual page.
Added some context to the Tru64 problems.
2001-05-09 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/.cvsignore: Added sane.7.
* README: Removed content that's now in the sane maual page.
Added reference to man sane.
* doc/Makefile.in doc/sane.man: Added SANE manual page.
* doc/sane.tex: Clarified the paragraph concerning sane_read. If
*len != 0 the status must be SANE_STATUS_GOOD.
2001-05-08 Simon Munton <simon@munton.demon.co.uk>
* backend/pie.c: Free devlist in sane_exit. Removed redundant check for
trailing newline in config file.
2001-05-07 Peter Fales <peter@fales.com>
* backend/dc25.[ch]: Cleaned up compiler warnings and fixed (very
minor) memory leak.
2001-05-07 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
* applied a patch by Douglas Gilbert to sanei_scsi.c
it solves the Problem that the scanner is not
found on linux systems when the order of the
scsi devices is not coverd by the order of
devices listed by /proc/scsi/scsi, it prefers
new kernel 2.4 methods when available
2001-05-06 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/mustek.c doc/mustek/mustek.CHANGES: Free devlist
in sane_exit.
* TODO: Updated concerning config_line[len - 1] stuff. Added
some (most) backends to list of sane_get_devices leak.
* backend/dll.c backend/dll.desc: Removed access to uninitialized
memory. Increased version number.
* backend/net.c backend/net.desc: Removed access to uninitialized
memory. Changed htons to ntohs in DBG statement. Free devlist
in sane_exit. Use "../include/sane/...". Increased version number.
2001-05-04 Gerhard Jaeger <g.jaeger@earthling.net>
* backend/plustek.c: Applied Petters' patch to avoid an
illegal memory access
2001-05-04 Henning Meier-Geinitz <henning@meier-geinitz.de>
* NEWS: Updated.
* PROJECTS: Removed umax_pp. Added Canon FB620S and FS2710 backend.
* TODO: Removed entry about umax_pp and comment about testing
for existing sane installations and plustek memory access violation.
Added Canon FB620S and FS2710 backend and entries about Tru64
compilation problems and installation procedure for translations.
* doc/backend-writing.txt: Added entries about SANE_I18N() and
documentation directories.
2001-05-03 Henning Meier-Geinitz <henning@meier-geinitz.de>
* AUTHORS README: Updated concerning umax_pp.
* doc/Makefile.in doc/sane-umax_pp.man .cvsignore: Added manpage for
umax_pp (patch from Stéphane Voltz <svoltz@wanadoo.fr>).
* tools/README tools/Makefile.in tools/umax_pp.c tools/.cvsignore:
Added umax_pp test program (patch from Stéphane Voltz
<svoltz@wanadoo.fr>).
* configure configure.in include/sane/config.h.in: Test for
linux/ppdev.h (for umax_pp backend).
* backend/umax_pp.c backend/umax_pp.h backend/umax_pp_low.c
backend/umax_pp_low.h backend/umax_pp_mid.c backend/umax_pp_mid.h
backend/umax_pp.conf backend/umax_pp.desc backend/Makefile.in
dll.conf: Added umax_pp backend (patch from Stéphane Voltz
<svoltz@wanadoo.fr>).
2001-05-02 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure configure.in: Don't use -ansi for Solaris. On some
Solaris installations compilation breaks with -ansi.
* doc/Makefile.in tools/sane-desc.el doc/.cvsignore: Install
sane.ps and sane.dvi if latex/makeindex/dvips is available.
Generate sane-backends.html in doc/. New target:
install-mostang. Installs the sane standard
(.ps, .ps.gz and html), the html manpages, and sane-backends.html
on www.mostang.com.
2001-05-01 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure configure.in include/sane/config.h.in README.solaris
sanei/sanei_scsi.c: Added support for Solaris sgen SCSI driver
(patch from Juergen Keil <jk@tools.de>).
* acinclude.m4 aclocal.m4 configure: Added Irix to the list
of operating systems that can use -Wl,-rpath.
* doc/Makefile.in: Install all the READMEs and other available
documentation in $docdir. Print which manpage is generated.
Don't remove files/dirs that doesn't exist. Remove the html
manpages in distclean. Fixed spelling mistake in .PHONY.
* TODO: Added entries about possible segfaults and memory leaks.
Added entry about AIX problems. Removed entry about installing
documentation.
* PROJECTS: Added Canon FB330P, FP630P.
2001-04-30 Jochen Eisinger <jochen.eisinger@informatik.uni-freiburg.de>
* doc/sane-mustek_pp.man: Added information about CIS patches
by Eddy De Greef
2001-04-29 Chris Pinkham <cpinkham@infi.net>
* backend/artec.c: Fixed bug causing possible dereference of a NULL
pointer.
* backend/artec.desc: Modified Parport entry to say AS6E scanner
supported by SANE AS6E backend.
2001-04-29 Petter Reinholdtsen <pere@td.org.uit.no>
* sanei/sanei_config.c sanei/sanei_codec_bin.c: Avoid reading
uninitialized memory.
* sanei/sanei_config.c: Fix memleak when using env
SANE_CONFIG_DIR.
* backend/net.c sanei/sanei_wire.c include/sane/sanei_wire.h: Make
sure net backend release all memory when finished.
* README: Added info about the CVS repository.
2001-04-29 Henning Meier-Geinitz <henning@meier-geinitz.de>
* sanei/sanei_wire.c: Don't free memory that's not alocced.
* sanei/sanei_config.c: Avoid reading uninitialized memory when
checking SANE_CONFIG_DIR.
* backend/mustek.c: Fixed several memory leaks.
* frontend/scanimage.c: Fixed memory leak.
* sanei/sanei_config2.c: Fixed memory leak: vendor wasn't freed.
* PROJECTS: Added entry for the Fujitsu M3091DCd. Updated my email
address.
* TODO: Added entry for the Fujitsu M3091DCd and a combined Fujitsu
backend. Clarified that "printf" also shouldn't be used.
* backend/dll.desc: Added my email as contact address.
* backend/m3091.desc: New file for the Fujitsu M3091DCd.
* doc/sane-mustek.man: Updated URL.
2001-04-28 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/mustek.CHANGES backend/umax.CHANGES backend/umax.FAQ
backend/umax.TODO: Moved to doc/mustek respectively doc/umax.
* doc/canon.CHANGES doc/canon.install2700F.txt doc/canon:
Moved canon-specific documentation to doc/canon.
* doc/mustek: New subdirectory for mustek-specific documentation.
* doc/sane-umax*.html doc/sane-umax*.jpg doc/sane-umax-doc.tex
doc/sane-umax-doc.dvi doc/umax: Moved all the umax-specific
documentation to new subdirectory umax.
2001-04-28 Peter Kirchgessner <peter@kirchgessner.net>
* backend/hp.desc, doc/sane-hp.man: Add support for new models
through PTAL-library
2001-04-27 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/agfafogus.c: Moved PATH_MAX after sanei_backend.h include
to avoid warning. Changed printf to DBG.
* backend/mustek.c backend/mustek.CHANGES backend/mustek.desc: Added
support for translating options. Used only PACKAGE_VERSION for
output. Updated email address. New version: 1.0-107.
* include/sane/sanei_backend.h include/sane/saneopts.h: Added macro
SANE_I18N. It's used to mark strings that can be translated and
used by a frontend. Usually these are option titles and descriptions
as well as the contents of string lists. Used this macro to mark
the translatable strings in saneopts.h. More translation support
will follow.
2001-04-22 Henning Meier-Geinitz <henning@meier-geinitz.de>
* PROBLEMS: Point to pnm/saned security risks.
* TODO: Removed the entries about epson usb mis-detection and check
for installed sane versions.
* configure configure.in backend/Makefile.in: Added detection of older
versions of SANE. The pnm backend is now disabled by default.
* backend/dll.c backend/dll.desc: Fixed file descriptor leak (found by
Douglas Gilbert). New version: 1.0.2.
* backend/net.desc: Added Jochen Eisinger's email address as contact
for the net backend.
* doc/sane-pnm.man: Point to pnm/saned security risks.
2001-04-21 Karl Heinz Kremer <khk@khk.net>
* backend/epson.conf: Commented out the usb config entry, this can
block other USB scanners from being recognized.
2001-04-19 Henning Meier-Geinitz <henning@meier-geinitz.de>
* AUTHORS: Added Michael Herder and me for pnm. Updated my email
address.
* TODO: Removed pnm entry about adding more options. Added entry about
epson backend freezing when trying to detect non-epson USB scanner.
Added entry about adding contact adresses to .desc files. Added
comment about me working on a sane man page. Removed entry about OS/2
problems in sanei_scsi.c.
* configure configure.in: Removed a newline in --help message.
* backend/pnm.c: Added several options: gamma tables
(-> arrays), resolution option (word list), read only test option
(SANE_CAP_SOFT_DETECT), several options for returning status codes
in sane_read (all of this is from Michael Herder <crapsite@gmx.net>).
Added build version info, print version information in sane_init.
Use ../include/sane/ for includes. Version is 1.0.1.
* backend/pnm.desc: Updated contact info and version.
2001-04-19 Gerhard Jaeger <g.jaeger@earthling.net>
* backend/plustek.c: removed again that old fgets() call - sorry
2001-04-19 Petter Reinholdtsen <pere@td.org.uit.no>
* tools/sane-config.in: Fix typo in previous commit.
2001-04-17 Karl Heinz Kremer <khk@khk.net>
* doc/sane-epson.man: Fixed types, some reformatting and got rid
of a duplicate paragraph.
2001-04-17 Henning Meier-Geinitz <hmg@gmx.de>
* backend/dc210.desc backend/dc240.desc backend/microtek2.desc:
Update contact information for backends. dc240 status is :NEW.
* TODO: added entries about as6e status shouldn't be :new, and
installing all documentation files.
2001-04-16 Petter Reinholdtsen <pere@td.org.uit.no>
* Makefile.in: New target 'sort-cvsignore' to keep all .cvsignore
files sorted.
* acinclude.m4 configure.in tools/sane-config.in: Try to guess how
to set runtime link path, and make it easier to extend.
* acinclude.m4 configure.in: Clean up warning flag handling.
2001-04-16 Henning Meier-Geinitz <hmg@gmx.de>
* README: Updated xsane link.
* configure configure.in backend/dll.c backend/dll.desc
backend/net.c backend/net.desc include/sane/config.h.in
Yet another change in the version system for dll and net.
For sane_init return the version of the package but use
own internal version number in the source (printed with
debugging enabled) and in *.desc. The internal versions
of both net and dll are set to 1.0.1. Please increase the
build number with every change on the source files.
* doc/realeases.txt -> doc/releases.txt. Fixed spelling error.
Added entries about sane-backends.html, sane.ps, man pages,
platforms page.
2001-04-14 Gerhard Jaeger <g.jaeger@earthling.net>
* backend/plustek.c backend/plustek.desc backend/plustek.h
backend/plustek-share.h
minor fixes and additional scanner models
* doc/sane-plustek.man added info about slowIO switch
2001-04-13 Oliver Rauch <Oliver.Rauch@Rauch-domain.de>
* changed my email address in AUTHORS
2001-04-13 Henning Meier-Geinitz <hmg@gmx.de>
* PROJECTS TODO: Added entry about E3 USB chipset.
* backend/dll.c backend/dll.desc: New version is 1.0.5. Version and
PACKAGE_VERSION is printed with debug level set to 1 or higher.
The version numbers of all backends that are loaded are printed
at debug level 3 or higher. Print error if backend with wrong
major version number is loaded. Some standardization changes
concerning the DBG messages.
* backend/net.c backend/net.desc: New version is 1.0.5. Version and
PACKAGE_VERSION is printed with debug level set to 1 or higher.
Some standardization changes concerning the DBG messages.
* backend/pnm.c: Return SANE_INFO_RELOAD_PARAMS even if the pnm
file doesn't exist or can't be loaded (from mh <crapsite@gmx.net>).
* doc/backend-writing.txt: Added AUTHORS to the list of things that
should be updated when including a new backend. Added points about
avoiding printf and exit in backends.
* doc/releases.txt: New file. This text summarizes some points to
pay attention to when a new release of sane-backends is made.
Additions and corrections are appreciated.
* doc/scanimage.man: Add some more information about the -V option.
* frontend/scanimage.c: The option -V now also prints the version of
the backend (ususally dll).
2001-04-11 Abel Deuring <a.deuring@satzbau-gmbh.de>
* sanei/sanei_scsi.c: fixed a bug in error handling for the
Linux SG driver verison 3.x
* sanei/sanei_scsi.c, configure.in, configure: Usage of direct IO
disabled by default.
* README.linux: Added a note, how to enable direct IO
2001-04-08 Henning Meier-Geinitz <hmg@gmx.de>
* backend/mustek.c backend/mustek.desc backend/mustek.CHANGES
Added detection of the TA for the Paragon 1200 SP Pro. Added
warning about not supported Trust scanners. Changed description
of contrast and brightness settings. Backend status is "stable"
now. New version: 1.0-106.
* acinclude.m4 aclocal.m4: Fixed comment concerning dc240.
* configure configure.in include/sane/config.h.in: Added test for
socklen_t in sys/socket.h. This fixes the compilation problem on
Irix.
* doc/sane-avision.man doc/sane-ricoh.man doc/sane-s9036.man
doc/sane-tamarack.man: find-scanner is now called
sane-find-scanner and installed on the system so it's not
necessary to point to the tools directory.
* frontend/scanimage.c: Fixed too long line in output.
* sane-config.in: Name is sane-config again (was sane-backends-config
due to the renaming of the package).
* TODO: Removed entry about net.c not compiling on Irix and
references to find-scanner in the man pages. Updated numbers of
the compilation warnings. Still too many, however.
2001-04-07 Henning Meier-Geinitz <hmg@gmx.de>
* backend/sc240.c backend/dc240.h backend/dc240.conf
backend/dc240.desc backend/dll.conf doc/sane-dc240.man:
Added dc240 backend for the Kodak DC240 Digital camera (from
Peter Fales <peter@fales.com>).
* doc/Makefile.in: Added sane-dc240 in section 5.
* backend/Makefile.in: Added dc240.
* configure configure.in: If the jpeg libs are not available,
dc240 is also disabled.
* AUTHORS: Added entry for dc240 and updated email address of
Peter Fales.
* NEWS: First version of the news entry for 1.0.5.
* PROJECTS: Removed dc240. Added Microrec ScanMaker 3600.
* README: Added dc240.
* TODO: Removed dc240. Added entry about keep-alive mechanism in saned.
* sane-backends.lsm: Added dc240.
* testsuite/.cvsignore: New file. Added entry for Makefile.
2001-03-31 Karl Heinz Kremer <khk@khk.net>
* backend/epson.*: Next attempt to get the reported number of
lines correct for the "color shuffling" part.
Added more comments.
2001-03-31 Henning Meier-Geinitz <hmg@gmx.de>
* backend/mustek.c backend/mustek.desc backend/mustek.h
backend/mustek.CHANGES: Fixed grascale gamma for the 600 II N.
Fixed ADF problems when selecting windows smaller than the
whole scan area. Fixed linedistcnace corrections issues concerning
ADF and concerning 1200SP V 1.00. New version: 1.0-105.
2001-03-31 Henning Meier-Geinitz <hmg@gmx.de>
* PROJECTS: Updated entry about Canon 1220U and Umax 1220P / HP3200C.
Added entry about Kodak DC-240.
* TODO: Added Umax 1200P/2000P & HP 320C + Kodak DC-240 as backends
to be included. Added net.c compilation problem.
2001-03-10 Jochen Eisinger <jochen.eisinger@gmx.net>
* frontend/saned.c: fixed bug that allowed access to a scanner
without being prompted for a password
2001-03-04 Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>
* umack backend updated to version 1.0-build-25
2001-02-26 Abel Deuring <a.deuring@satzbau-gmbh.de>
* sanei/sanei_scsi.c: removed a possible null pointer
dereference in the Solaris/Schilling driver part. (Bug was
found and fixed by William L. Sebok)
* backend/tamarack.c: inconsistent call to sanei_scsi_cmd fixed
2001-02-22 Petter Reinholdtsen <pere@td.org.uit.no>
* TODO: Add comment on how link problems should really be fixed.
* TODO: List memleak problem for sane_get_devices().
* configure.in include/sane/config.h.in: Really move definition of
SCSIBUFFERSIZE from CFLAGS to config.h.
* configure.in testsuite/*: Started on runtime test suite.
Currently only tests if PNM test scanning works.
* sanei/sanei_constrain_value.c sanei/sanei_load_values.c
sanei/sanei_save_values.c: Include "sane/sanei.h" to make sure the
prototype match the function.
* backend/pnm.c: Write more sensible error message when failing to
open PNM file.
* include/sane/sanei_backend.h: Include <fcntl.h> before testing
for O_NONBLOCK and <limits.h> before testing for PATH_MAX to
increase the chances of getting the real value.
2001-02-12 Petter Reinholdtsen <pere@td.org.uit.no>
* backend/dll.c backend/v4l.c: Get rid of small memory leak when
using 'scanimage -L'.
2001-02-10 Tom Martone <tom@martoneconsulting.com>
* backend/bh.c backend/bh.h doc/sane-bh.man
added support for Copiscan 8000 series by Mark Temple
added options deskew and rotation
inquiry compares product to COPISCAN rather than COPISCAN II
2001-02-04 Peter Kirchgessner <peter@kirchgessner.net>
* hp-backend V0.94, backend/hp.c hp-handle.c hp-scl.h:
Switch off lamp after scan
2001-01-31 Abel Deuring <a.deuring@satzbau-gmbh.de>
* sanei/linux_sg3_err.h: New version provided by Douglas Gilbert.
Does not longer #include <linux/../scsi/scsi.h> and
#include <linux/../scsi/sg.h>
* sanei/sanei_scsi.c (Linux part): fixed some format errors in
debug output; added debug: system("cat /proc/scsi/sg/debug 1>&2"),
if debug level >= 255. (Suggestion by Douglas Gilbert)
2001-01-23 Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>
* TODO: sane-config changes
2001-01-21 Tom Martone <tom@martoneconsulting.com>
* backend/dll.conf: Added bh
2001-01-21 Henning Meier-Geinitz <hmg@gmx.de>
* AUTHORS: Added Tom Martone.
* PROJECTS: Removed bh (now included in sane).
* README: Added entry for sane-bh(5).
* TODO: Removed bh. Updated BearPaw entry. Added entry about v4l
problem.
* backend/v4l.c: Changed comment as v4l is part of the sane package.
2001-01-20 Tom Martone <tom@martoneconsulting.com>
* doc/.cvsignore: Added sane-bh.5.
2001-01-20 Tom Martone <tom@martoneconsulting.com>
* backend/bh.c backend/bh.conf backend/bh.h doc/sane-bh.man
Added new backend Bell and Howell Copiscan scanners
* backend/bh.desc
Updated version from (0.1) to 1.0-4
Referenced manpage
* backend/Makefile.in
Added bh to PRELOADABLE_BACKENDS
Added libsane-bh.la dependencies
* doc/Makefile.in
Added sane-bh.5 to SECT5
2001-01-17 Henning Meier-Geinitz <hmg@gmx.de>
* backend/mustek.c backend/mustek.desc backend/mustek.h
backend/mustek.CHANGES doc/sane-mustek.man:
Added 36 bit mode for Pro models. Removed support for "special"
modes, used options instead. Code cleanup. Updated manpage
concerning sane-find-scanner. New version: 1.0-104.
* configure: regenerated from configure.in.
2001-01-14 Petter Reinholdtsen <pere@td.org.uit.no>
* sanei/sanei_scsi.c: Make sure to initialize uninitialized
variable 'defined' to zero.
* include/sane/sanei_wire.h: Add missing prototype for
sanei_w_ptr() and sanei_w_bool().
* configure.in include/sane/config.h.in: Move definition of
HAVE_DEV_URANDOM and SCSIBUFFERSIZE from CFLAGS to config.h.
2001-01-07 Abel Deuring <a.deuring@satzbau-gmbh.de>
* sanei/sanei_scsi-c: (Linux part) timeout for SCSI commands
sent with the SG driver version increased; debug output of
device status, host status, driver status and sense buffer
added.
2001-01-09 Henning Meier-Geinitz <hmg@gmx.de>
* PROJECTS TODO: Added/updated entries about backends for Mustek
BearPaw and 1200 UB scanners.
2001-01-07 Abel Deuring <a.deuring@satzbau-gmbh.de>
* sanei/sanei_scsi-c: (Linux part) improved detection of
sanei_scsi_max_request_size. Setting SANE_SG_BUFFERSIZE for
low drivers which don't support scatter-gather should
no longer be necessary.
* sanei/sanei_scsi-c: (Linux part) Added support for the new
devfs in sanei_scsi_find_devices-
* backend/sharp.c: Test for existence of shm.h added.
* TODO: Removed entry about missing detection of shm.h in sharp
backend.
2001-01-03 Henning Meier-Geinitz <hmg@gmx.de>
* PROJECTS: Added Umax 1220P / HP3200C.
2000-12-31 Henning Meier-Geinitz <hmg@gmx.de>
* tools/find-scanner.c: Removed. Now called sane-find-scanner.
* tools/sane-find-scanner: New file (was find-scanner).
* tools/.cvsignore tools/Makefile.in tools/README: Updated because
of name change. sane-find-scanner is installed now.
* README README.linux: Updated because of sane-find-scanner.
* frontend/scanimage.man: Updated because of sane-find-scanner.
* doc/sane-find-scanner.man: New file.
* doc/.cvsignore doc/Makefile.in: Added sane-find-scanner(1).
* TODO: Updated concerning sane-find-scanner. Added entry about
qcam /tmp file handling. Some spelling corrections.
2000-12-31 Henning Meier-Geinitz <hmg@gmx.de>
* backend/mustek.CHANGES backend/mustek.c backend/mustek.desc
backend/mustek.h doc/sane-mustek.man: Added calibration for Pro
scanners and the SE 12000 SP Plus. Added option to use the full
legal size of the Paragon 1200 LS scanner. Added fast preview for
Pro scanners. Bug fixes. New version: 1.0-103.
2000-12-25 Karl Heinz Kremer <khk@khk.net
* backend/epson.*: Version 0.2.01
Added bit-depth selection again.
Fixed problem with bilevel scanning with Perfection610: The
line count has to be an even number with this scanner.
Several initialization fixes regarding bit depth selection.
This version goes back into the CVS repository, the 1.0.4
release is out and therefore the code freeze is over.
Some general cleanup, added more comments.
2000-12-23 Henning Meier-Geinitz <hmg@gmx.de>
* TODO: Removed entry about net/saned crashes.
* backend/net.c: Fixed segfault when using SANE_TYPE_STRING options
(e.g. scanimage on localhost). Added checks to prevent other
segfaults. Fixed some warnings.
* backend/snapscan.desc: Changed to use new homepage.
2000-12-23 Henning Meier-Geinitz <hmg@gmx.de>
* NEWS: Added date of release.
* TODO: Removed entries about PATH_MAX, sanei_scsi_find_devices, and
shm.h. Added entry about the necessity to check HAVE_SYS_SHM_H.
* configure configure.in include/sane/config.h.in: Default to
--enable-warnings again. Don't set "-ansi" for OS/2. Test for
sys/shm.h.
* backend/GUIDE: Moved to doc/backend-writing.txt.
* doc/backend-writing.txt: New file (moved from backend/GUIDE).
Added comments about sanei-backend.h and PATH_MAX.
* include/sane/sanei_backend.h: Added define for PATH_MAX (if
necessary).
* sanei/sanei_scsi.c: Implemented sanei_scsi_find_devices for FreeBSD
(from ports@FreeBSD.org).
* tools/Makefile.in: Use INSTALL_SCRIPT instead of INSTALL_PROGRAM for
sane-config (from ports@FreeBSD.org).