sane-project-backends/ChangeLog

2005-06-12  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/descriptions/unsupported.desc: Removed Samsung SCX-4216F
	  (supported by samsung backend). Dell 1600n has also network
	  connection. 

2005-06-12  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/descriptions/unsupported.desc: Added Canon CanoScan LiDE
	  500F. 
	
2005-06-04  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/descriptions/unsupported.desc: Added Genius ColorPage-SF600.
	* doc/descriptions-external/brother2.desc: New. Listed scanners
	  supported by the new external brother2 backend.
	* doc/descriptions-external/brother.desc: Fixed comments.
	  
2005-05-30  Karl Heinz Kremer <khk@khk.net>

	* doc/descriptions/epson.desc: Added CX-4600

2005-05-29  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/descriptions-external/samsung.desc: Status of Samsung
	  SCX-4100 is "good" asit's reported to work.
	* doc/sane-usb.man doc/sane.man: Updated, mostly concerning kernel
	  scanner driver (deprecated). Minor fixes.
	* backend/gt68xx.c backend/gt68xx_devices.c backend/gt68xx_high.c
	  backend/gt68xx_low.h doc/sane-gt68xx.man
	  doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES
	  doc/gt68xx/gt68xx.TODO:
	  Start exposure with the settings from the scanner entry. CIS
	  Calibration and exposure uses a broader spectrum now. Expsoure
	  limit is increased to 50 loops. Genius Vivid 4x is reported to
	  work so the UNTESTED label is removed now. Visioneer 7300 is
	  reported to work so the UNTESTED label is removed now. Genius
	  ColorPage Vivid 1200XE: Removed UNTESTED label. Fixed
	  resolutions. Adjusted margins. Fixed color order. Fixed
	  linedistance. Adjusted AFE. Mustek ScanExpress 1248 UB: Fixed
	  margins. Adjusted AFE. Adjusted exposure. Adjusted
	  gamma. Changed status to "complete". Mustek BearPaw 2400 CU
	  Plus: Adsusted exposure and AFE parameters. Hopefully stripes
	  and similar trouble are gone now. Mustek BearPaw 1200 CU:
	  Increased exposure to avoid vertical lines. Updated manual page.

2005-05-28  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/descriptions/unsupported.desc: Added Avision DS310F. Added link
	  for the UMAX Astra 4000. Fixed missing link for Genius
	  ColorPage-Slim 1200 USB2.
	
2005-05-26  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/net.tex doc/sane.tex: Mention RPC codes explicitely and
	  explain what request and reply means. based on patch from
	  Johannes Berg <johannes@sipsolutions.net>. 

2005-05-25  Jochen Eisinger <jochen@penguin-breeder.org>

	* doc/descriptions/mustek_pp.desc: added scanner

2005-05-23  Julien Blache <jb@jblache.org>
	* doc/sane-find-scanner.man, doc/gamma4scanimage.man: spelling
	fixes from A Costa.

2005-05-22  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/descriptions/unsupported.desc: Added Konica Minolta Dimage
	  5400 2. Fixed bus type for Mustek 800 II EP.
	* doc/descriptions-external/genesys.desc: Changed status of Medion
	  MD 6471 to "basic".

2005-05-22  Oliver Schwartz <Oliver.Schwartz@gmx.de>

	* backend/snapscan-options.c:
	  Disabled 2400 DPI for Epson 2480 due to user report of
	  broken scanner

2005-05-20  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* backend/gt68xx.c backend/gt68xx_devices.c
	  backend/gt68xx_generic.c backend/gt68xx_generic.h
	  backend/gt68xx_gt6801.c backend/gt68xx_gt6801.h
	  backend/gt68xx_gt6816.c backend/gt68xx_gt6816.h
	  backend/gt68xx_high.c backend/gt68xx_high.h backend/gt68xx_low.c
	  backend/gt68xx_low.h backend/gt68xx_mid.c
	  doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES
	  doc/gt68xx/gt68xx.TODO:
	  Mustek BearPaw 1200 CU Plus model 0x21b works now. Fixed
	  firmware and offset settings. Calibration is not completely ok
	  yet, however.  Code cleanup for setup_scan (only one function
	  for all chipsets).  Simplified line mode/pixel mode setting 
	  Updated TODO.  Mustek BearPaw 2448 TA Plus is now only
	  "basic". Too much trouble for "good".  Removed option "fast
	  preview". By default for preview mode 8 bits/pixel are used.  
	  Fixed indentation.  Full scan really scans from y=0 on gt6816
	  scanners now.
	* po/sane-backends.bg.po po/sane-backends.cs.po
	  po/sane-backends.da.po po/sane-backends.de.po
	  po/sane-backends.es.po po/sane-backends.fi.po
	  po/sane-backends.fr.po po/sane-backends.it.po
	  po/sane-backends.nl.po po/sane-backends.no.po
	  po/sane-backends.pl.po po/sane-backends.pt.po
	  po/sane-backends.ru.po po/sane-backends.sv.po: Regenerated
	  translation files. Updated German translation.

2005-05-16  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/backend-writing.txt: Minor updates and line-wrap fixes.
	* doc/descriptions/unsupported.desc: Added Kodak i30 and Minolta
	  Dual Scan IV. Updated link to Konica Minolta website.

2005-05-15  frank  <sane at zago net>

	* tools/Makefile.in: remove superflous libraries for sane-desc 
	* doc/descriptions/matsushita.desc: changed some scanner status from
	  good to minimal
	* doc/descriptions/unsupported.desc: added a few Panasonic scanners.

2005-05-13  Julien Blache <jb@jblache.org>
	* tools/hotplug/libsane.usermap: Added Epson Stylus RX620
	(04b8/0811). From Mike Talbot.

2005-05-11  Gerhard Jaeger <gerhard@gjaeger.de>

	* backend/plustek-pp_misc.c: Applied patch (see bug #301605).
	* doc/plustek/Plustek-PARPORT.changes: Update.
	* backend/plustek-pp.c: Bumped build number.

2005-05-10  Gerhard Jaeger <gerhard@gjaeger.de>

	* sanei/sanei_access.c: Added PATH_MAX, in case it's not defined 
	  by any header (i.e. OS/2).

2005-05-07  Mattias Ellert <mattias.ellert@tsl.uu.se>

	* README.darwin: updated the section about libusb, since all known
	  bugs have now been fixed in the libusb CVS.

2005-05-05  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* backend/gt68xx.c backend/gt68xx_devices.c
	  doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES
	  doc/gt68xx/gt68xx.TODO: Plustek OpticSlim 2400: Fixed list of
	  resolutions. That fixed the preview. Removed "untested"
	  warning. Adjusted scan area.  Updated gt68xx.TODO.  Find firmwares
	  independent of capitalization (bug #301580).

2005-05-07 Julien Blache <jb@jblache.org>

	* tools/hotplug/libsane.usermap: Added Microtek ScanMaker 3700
	(05da/40cb). From Ian Beckwith.

2005-05-06 Gerard Klaver <gerard at gkall dot hobby dot nl>

	* backend/qcam.c -indent -gnu, bugreport 300128 free (devlist) added,
	  DEBUG output added and some small fixes.
	
2005-05-05  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/descriptions/unsupported.desc: Added Dell 922.
	* backend/mustek.c backend/mustek.h doc/descriptions/mustek.desc
	  doc/mustek/mustek.CHANGES: Added options to set the time after
	  which the lamp of the A3 Pro is shut off and to shut it off
	  immediately.
	
2005-05-02  Peter Fales  <peter@fales-lorenz.net>

	* backend/gphoto2.c: Fix core dump when no port is specified in 
	  the gphoto2 config  file.  (bug #301552)

2005-04-29  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/descriptions/sp15c.desc: Added ScanPartner 600C (bug
	  #301528). 
	* doc/descriptions/unsupported.desc: Removed several Brother
	  scanner which are supported by the brother backend now.
	* doc/descriptions-external/brother.desc: Fixed link.

2005-04-28  Julien Blache <jb@jblache.org>

	* backend/v4l.c: duplicate capability.name in attach() so that
	each device is listed with its actual name, not with the name of
	the last discovered device. Reported by Andreas Hartmann.

2005-04-28  Mattias Ellert <mattias.ellert@tsl.uu.se>

	* frontend/scanimage.c: Added missing braces

2005-04-27  Gerhard Jaeger <gerhard@gjaeger.de>

	* doc/descriptions/plustek.desc: Added UMAX Astranet ia101.

2005-04-26  Julien Blache <jb@jblache.org>

	* tools/hotplug/libsane.usermap: Added Epson Stylus CX3650
	(04b8/080e), from Daniel Sobe.

2005-04-25  Gerhard Jaeger <gerhard@gjaeger.de>

	* include/sane/sanei_pp.h, sanei/sanei_pp.c: Added outb_eppdata
	  functionality (thanks to Anderson Lizardo).
	* backend/plustek-pp_procs.h, backend/plustek-pp_io.c,
	  backend/plustek-pp_misc.c: Fixed compilation problem for kernel
	  module with gcc-3.4 compiler.
	* doc/plustek/Plustek-PARPORT.changes: Update.
	* backend/plustek-pp.c: Bumped build number.

2005-04-24  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* tools/hotplug/libsane.usermap: Fixed Minolta Scan Dual III entry
	  (bug #301512).
	* doc/descriptions/mustek.desc: Added Mustek TwainScan II SP (bug
	  #301217). 
	* doc/descriptions-external/viceo.desc: Added Primax Colorado 2200
	  USB.
	* doc/descriptions/unsupported.desc: Added Canon PIXMA MP110.
	* AUTHORS: Marked Kazuya Fukuda as active.
	
2005-04-23  Julien Blache <jb@jblache.org>

	* LICENSE: Add an FAQ section.
	* tools/hotplug/libsane.usermap: Added Genius ColorPage Vivid3xe
	(0458/2017), from Ramiro Aceves through Debian BTS.

2005-04-18  Gerhard Jaeger <gerhard@gjaeger.de>

	* backend/plustek-usbhw.c, backend/plustek-usbscan.c: Fixed
	  problem, that has been reported in conjunction with backtracking
	  and sensor-speedup option.
	* doc/plustek/Plustek-USB.changes: Update.
	* backend/plustek.c: Bumped build number.

2005-04-16  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/descriptions/unsupported.desc
	  doc/descriptions-external/genesys.desc: Added and updated
	  several scanners.

2005-04-15 Gerard Klaver <gerard at gkall dot hobby dot nl>

	* sanei/sanei_usb.c More debug info for control and isochronous mode
	  Detection added for endpoints for  configurations, interface and
	  altsetting numbers > 0
	  Routine added for changing configuration, interface or altsetting
	  number
	  sanei_usb_set_configuration
	  sanei_usb_claim_interface
	  sanei_usb_release_interface
	  sanei_usb_set_altinterface
	* include/sane/sanei_usb.h headers and text added for
	  sanei_usb_set_configuration
	  sanei_usb_claim_interface
	  sanei_usb_release_interface
	  sanei_usb_set_altinterface
	* frontend/scanimage.c added -B option buf size
	  split up printf command to remove warning ISO C89
	  patch for bugreport 300160, ranges for width and height are wrong
	* doc/scanimage.man added text -B option buf size
	
2005-04-13  Mattias Ellert <mattias.ellert@tsl.uu.se>

	* backend/hp-option.c: Add missing SANE_I18N
	* po/sane-backends.*.po: Regenerate .po files accordingly
	* po/sane-backends.sv.po: Update Swedish translations

2005-04-12  Mattias Ellert <mattias.ellert@tsl.uu.se>

	* Various man page fixes: sane-agfafocus.man, sane-apple.man,
	  sane-artec.man, sane-artec_eplus48u.man, sane-avision.man,
	  sane-bh.man, sane-canon_pp.man, sane-coolscan.man,
	  sane-coolscan2.man, sane-dll.man, sane-epson.man, sane-fujitsu.man,
	  sane-hp.man, sane-leo.man, sane-matsushita.man, sane-microtek2.man,
	  sane-mustek.man, sane-mustek_pp.man, sane-mustek_usb.man,
	  sane-nec.man, sane-niash.man, sane-pie.man, sane-plustek.man,
	  sane-plustek_pp.man, sane-sceptre.man, sane-scsi.man, sane-sharp.man,
	  sane-sm3600.man, sane-sm3840.man, sane-sp15c.man, sane-teco1.man,
	  sane-teco2.man, sane-teco3.man, sane-test.man, sane-u12.man,
	  sane-umax.man, sane-umax1220u.man, sane-umax_pp.man, sane.man,
	  saned.man

2005-04-11  Gerhard Jaeger <gerhard@gjaeger.de>

	* acinclude.m4, configure.in, configure: the locking feature will
	  now be disabled, when the selected group could not be set.
	  The configuration script should not fail any longer.

2005-04-10  Julien Blache <jb@jblache.org>

	* backend/hp5400_xfer.h, backend/hp5400_sanei.c, backend/hp5400.c:
	  make non-SANE-standard functions static.

2005-04-10  Jochen Eisinger <jochen@penguin-breeder.org>

	* backend/mustek_pp.c, backend/mustek_pp.conf, sanei/sanei_pa4s2.c,
	  include/sane/sanei_pa4s2.h, doc/sane-mustek_pp.man: added global
	  option "no_epp" to work around a known bug in the linux parport
	  code.

2005-04-02  Julien Blache <jb@jblache.org>

	* doc/sane.man: typo fix from A Costa.

2005-04-01  Gerhard Jaeger <gerhard@gjaeger.de>

	* README: Added some info about the --enable-locking switch.
	* doc/descriptions/unsupported.desc
	  doc/descriptions-external/genesys.desc: Moved some Plustek
	  devices over to the genesys descriptions.
	* tools/hotplug/libsane.usermap: Added some Plustek devices.
	* mkinstalldirs: Added -o and -g options for changing the
	  owner and group of an installed directory.
	* acinclude.m4, configure.in, configure: Added --enable-locking
	  and --with-group to enable device locking via sanei_access-lib
	  and to specify the group of the locking directory.
	* include/sane/config.h.in: ENABLE_LOCKING has been added
	  by automake/autoconf.
	* backend/Makefile.in: Added installation of 
	  $(localstatesanedir)/lock/sane, were the lockfile should go to.
	  Also added linking of sanei_access to the plustek backend.
	* include/Makefile.in: Added sane/sanei_access.h.
	* sanei/Makefile.in: Added sanei_access.c.
	* include/sane/sanei_access.h sanei/sanei_access.c: Initial checkin.

2005-03-31 Julien Blache <jb@jblache.org>

	* doc/scanimage.man: fix typos, patch from A Costa.

2005-03-20 Earle F. Philhower III <earle@ziplabel.com>

	* backend/sm3840_scan.c: Big-endian graymode fix

2005-03-17 Gerard Klaver <gerard at gkall dot hobby dot nl>

	* doc/descriptions-external/samsung.desc added

2005-03-16  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/descriptions/unsupported.desc: Removed Microtek ScanMaker
	  4800 (supported by sm3840 now).

2005-03-16  Earle F. Philhower III <earle@ziplabel.com>
	* backend/sm3840.c backend/sm3840_scan.c backend/sm3840.conf
	  backend/Makefile.in doc/descriptions/sm3840.desc
	  doc/sane-sm3840.man: Added ScanMaker 4800 USB ID and
	  documentation, fixed PPC endianness problems, fixed
	  Makefile dependencies for sm3840 driver

2005-03-13  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/descriptions/unsupported.desc
	  doc/descriptions-external/genesys.desc: Added and updated
	  various scanners. 

2005-03-04  Gerard Klaver <gerard at gkall dot hobby dot nl>

	* doc/sane-teco2.man: text update
	  backends/teco2: use of __unused__

2005-03-03  Julien Blache <jb@jblache.org>

	* tools/hotplug-ng/libsane.hotplug: add missing quote in the grep line.

2005-03-02  Julien Blache <jb@jblache.org>

	* tools/hotplug-ng/libsane.hotplug: allow for several spaces
	between fields in the db file.

2005-02-28  Julien Blache <jb@jblache.org>

	* tools/hotplug-ng/libsane.hotplug: replace \t by [[:space:]] when
	grepping for the device in the db file.

2005-02-21  Julien Blache <jb@jblache.org>

	* tools/hotplug-ng: added new hotplug/hotplug-ng hook, with
	scripts and documentation.

2005-02-20  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/descriptions/unsupported.desc: Removed Genius
	  ColorPage-Vivid Pro II, now in external backend. Added Visioneer
	  9000.
	* AUTHORS configure configure.in backend/Makefile.in
	  backend/dll.conf backend/sm3840.c backend/sm3840.conf
	  backend/sm3840.h backend/sm3840_lib.c backend/sm3840_lib.h
	  backend/sm3840_params.h backend/sm3840_scan.c doc/Makefile.in
	  doc/sane-sm3840.man doc/sane.man doc/descriptions/sm3840.desc:
	  Added sm3840 backend (from "Earle F. Philhower, III"
	  <earlephilhower@yahoo.com>).
	* doc/descriptions-external/sm3840.desc: Removed (backend included
	  in SANE).
	* NEWS: Updated.

2005-02-14  Gerhard Jaeger <gerhard@gjaeger.de>

*	doc/descriptions-external: Added new external backend geniusvp2.

2005-02-10  Karl Heinz Kremer <khk@khk.net>

	* doc/descriptions/epson.desc: Added CX-3600 and 3650
	  doc/sane-epson.man, backend/epson.conf: Added information about
	  GT-6500 (bug #301100)

2005-02-08  Oliver Schwartz <Oliver.Schwartz@gmx.de>

	* backend/snapscan.h backend/snapscan.conf
	  Added IDs for Benq 5250C and 5000S

2005-02-08  Gerhard Jaeger <gerhard@gjaeger.de>

	* sanei/sanei_pp.c: Cleanup, uses now static array for parport
	  management instead of dynamically allocated. Fixes at least a
	  potential memory leak.

2005-02-06  Oliver Schwartz <Oliver.Schwartz@gmx.de>

	* doc/descriptions/unsupported.desc doc/descriptions/snapscan.desc:
	  Renamed "Benq" to "Benq (Acer)" for better access through the
	  scanner search engine. Fixes bug #301158

2005-02-06  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/descriptions/unsupported.desc: Added several scanners. Minor
	  fixes.
	* doc/descriptions-external/sm3840.desc: Added new external
	  backend sm3840.
	* doc/descriptions-external/brother.desc: Updated status.
	* po/Makefile.in po/sane-backends.pl.po: Added Polish translation
	  (from Jerzy Szczudlowski
	  <jerzy-guest@users.alioth.debian.org>). See bug #301054.
	   
2005-02-04  Gerhard Jaeger <gerhard@gjaeger.de>

	* tools/hotplug/libsane.usermap: Added Epson CX6600 based on patch
	  submitted by Aurelien Jarno <lists@aurel32.net>.

2005-02-03  Ulrich Sigwanz <usigwanz@freesurf.ch>

	* backend/niash_xfer.c:
	* tools/hotplug/libsane.usermap:
	  added ID for Silitek-HP-ScanJet-3400c-Clone
          
2005-01-19  Oliver Rauch <Oliver.Rauch@rauch-domain.de>

	* backend/coolscan.c: added initilization of dev->scanning = SANE_FALSE

2005-01-18  Oliver Schwartz <Oliver.Schwartz@gmx.de>

	* backend/snapscan.h: Added ID for Benq 5250C

2005-01-16  Karl Heinz Kremer <khk@khk.net>

	* backend/epson_usb.c: Added IDs for RX-425 (from bug report #301114)
	* doc/descriptsions/epson.desc: Added RX-425

2005-01-16  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/descriptions/unsupported.desc: Added UMAX Astraslim
	  6000. Added Trust SCSI Scan 19200 -Excellence Series-. Added
	  ColorPage-Vivid Pro II. 
	* tools/hotplug/libsane.usermap: Added Epson Stylus RX425 based on
	  bug report #301114.
	* doc/sane-agfafocus.man doc/sane-artec.man: Fixed some macros
	  (patch from esr@thyrsus.com).

2005-01-12  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/descriptions/unsupported.desc: Added Genius ColorPage-Slim
	  1200 USB2.
	* doc/descriptions-external/genesys.desc: Added Canon Lide 40.
	* doc/descriptions-external/brother.desc: Added several scanners
	  and updated the status of others based on user comments.

2005-01-12  Julien Blache <jb@jblache.org>

	* tools/hotplug/libusbscanner: use sysfs to get the device number,
	instead of guessing (it ended up being wrong in a number of
	cases...). Fix from Ubuntu, transmitted by Martin Pitt.

2005-01-12  Gerhard Jaeger <gerhard@gjaeger.de>

	* doc/plustek/Plustek-USB.changes: Update.
	* backend/plustek.c: Bumped build number. Copyright Update.
	* backend/plustek-usbscan.c backend/plustek-usbshading.c: 
	  Using now PhyDpi.y as selector for the motor MCLK setting. 
	  Copyright Update.
	* backend/plustek-usbdevs.c: 
	  Tweaked motor settings for EPSON and CANON1200. Copyright Update.
	* backend/plustek-*.[ch]: Copyright Update.

2005-01-09  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/descriptions/unsupported.desc: Added Guillemot scanner.

2005-01-09  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.c: "flaming hack to get USB scanners working without timeouts 
	  under linux" submitted by "Steve" (in comment to bug #300830)
	* doc/descriptions/epson.desc, doc/sane-epson.man: 
	  Added SCSI version of GT-5000 to supported list.

2004-12-29  Julien Blache <jb@jblache.org>
	* tools/sane-find-scanner.c: Added a hint about switching the
	scanner on and connecting it to the computer before doing
	anything.

2004-12-26  Gerard Klaver <gerard at gkall dot hobby dot nl>

	* doc/descriptions-external/hpaio.desc join two lines so html
	  conversion possible
	  doc/descriptions-external/stv680.desc added two webcams with
	  different usb vid and pid 
	  
2004-12-26  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/descriptions/unsupported.desc: Added several scanners.

2004-12-18  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.c backend/epson_usb.c: Added USB IDs for
	  CX-3650 and CX-4600 and updated version number.

2004-12-15  Gerard Klaver <gerard at gkall dot hobby dot nl>

	* doc/descriptions-external/hpaio.desc stv680.desc 
	  Info new external backends
	  
2004-12-01  Oliver Schwartz <Oliver.Schwartz@gmx.de>

	* backend/snapscan.c backend/snapscan-scsi.c backend/snapscan-options.c:
	  Added quality calibration for Epson 2480 (implementd by Simon Munton)

2004-12-07  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* backend/gt68xx_devices.c: Disabled stop_scan command for Mustek
	  BearPaw 2448 TA Plus.

2004-12-05  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/sane-gphoto2.man doc/sane-microtek2.man: Fixed minor
	  glitches based on patch from Eric S. Raymond <esr@thyrsus.com>.
	* doc/descriptions/unsupported.desc: Added Benq 320p.

2004-12-04  Julien Blache <jb@jblache.org>
	* tools/hotplug/libsane.usermap: Added Epson Perfection 4870
	Photo, vendor 0x04b8 product 0x0128.

2004-12-01  Oliver Schwartz <Oliver.Schwartz@gmx.de>

	* backend/snapscan.c: Applied fix for allocation of gamma tables
	  (thanks to Simon Munton)

2004-12-01  Oliver Schwartz <Oliver.Schwartz@gmx.de>

	* doc/descriptions/unsupported.desc: removed Epson Perfection 1270

2004-12-01  Oliver Schwartz <Oliver.Schwartz@gmx.de>

	* backend/snapscan.h backend/snapscan.c backend/snapscan-scsi.c 
	  backend/snapscan-options.c doc/descriptions/snapscan.desc: 
	  Added support for Epson Perfection 1270

2004-12-01  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/descriptions/umax1220u.desc doc/descriptions/unsupported.desc
	  doc/descriptions-external/genesys.desc: Added several scanners. Moved
	  UMAX 2100U to umax1220u.desc. Moved Plustek S(T)12 to unsupported.desc.

2004-11-28  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/descriptions-external/brother.desc. Updated comments. 9160 works.

2004-11-21  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/descriptions/unsupported.desc: Updated/added several scanners.

2004-11-21  Gerhard Jaeger <gerhard@gjaeger.de>

	* backend/plustek-usb.c: Fixed problem, when builing supported
	  and connected device list.

2004-11-19  Rene Rebe <rene@exactcode.de>

	* sanei/sanei_usb.c configure.in: use usb_interrupt_read instead of
	  usb_bulk_read for sanei_usb_read_int. Fixes bug #300878. Added a
	  missing DBG output in sanei_usb_read_int. Check for
	  usb_interrupt_read to make sure, we have at least version 0.1.8.

2004-11-19  Rene Rebe <rene@exactcode.de>

	* backend/avison.c doc/descriptions/avision.desc
	  doc/descriptions/unsupported.desc: just added new IDs including
	  moving the HP 82xx to the avision backend

2004-11-19  Gerhard Jaeger <gerhard@gjaeger.de>
	
	* backend/plustek.c backend/plustek-usb*: Major update, see
	  doc/plustek/Plustek-USB.changes. Esp. improved support for multiple
	  devices and autodetection.
	* doc/plustek/Plustek-USB.changes: Update.
	* doc/descriptions/plustek.desc: Updated release number.

2004-04-15  St<53>hane Voltz <svoltz@wanadoo.fr>

	* backend/umax_pp_low.c: non i386 linux compilation fix,
          1220P gray levels scan hang fix, 1220P color calibration tuning.

2004-11-14  Oliver Schwartz <Oliver.Schwartz@gmx.de>

	* snapscan-sources.c: Applied patch by Julien Blache to change
	  ch_past_init from SANE_Int to SANE_Bool

2004-11-14  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* backend/gt68xx.c backend/gt68xx_devices.c
	  backend/gt68xx_gt6801.c backend/gt68xx_gt6816.c
	  doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES: Fixed test
	  to move home sensor at the start of scan.  Fixed gray mode
	  linemode test. That stopped e.g. the Plustek OpticPro U 16 B from
	  working in gray mode.

2004-11-13  Frank Zago <fzago at austin dot rr dot com>

	* include/sane/sanei_backend.h: Added compiler attribute __unused__ for unused variables/functions.

	* backend/leo.c backend/teco3.c backend/matsushita.c
	  backend/sceptre.c backend/teco1.c: use __unused__
	* sanei/sanei_wire.c sanei/sanei_pa4s2.c sanei/sanei_scsi.c: fixes for 64 bits platforms.
	* backend/sp15c-scsi.h backend/sp15c.h backend/dc210.c backend/dc210.h: fixes some warnings.
	
2004-11-13  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* backend/v4l.c: 64 bit fix from Frank Zago <fzago at austin dot
	  rr dot com>.

2004-11-13  Julien Blache <jb@jblache.org>

	* tools/hotplug/libsane.usermap: Added Epson Stylus Photo RX500,
	Epson Stylus Photo RX600 and Minolta Scan Dual II.

2004-11-10  Oliver Schwartz <Oliver.Schwartz@gmx.de>

	* snapscan-sources.c: First implementation of deinterlacer for epson
	  scanners at high resolutions (thanks to Brad Johnson)

2004-11-07  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* configure configure.in: Updated version. Enabled compilation
	  warnings.
	* doc/releases.txt: Updated according to current practice.

Older entries can be found in ChangeLog-1.0.15.