sane-project-backends/backend/snapscan.conf

95 wiersze
1.9 KiB
Plaintext

#------------------------------ General -----------------------------------
# Change to the fully qualified filename of your firmware file, if
# firmware upload is needed by the scanner
firmware /path/to/your/firmware/file.bin
# If not automatically found you may manually specify a device name.
# For USB scanners also specify bus=usb, e.g.
# /dev/usb/scanner0 bus=usb
# For SCSI scanners specify the generic device, e.g. /dev/sg0 on Linux.
# /dev/sg0
#---------------------------------------------------------------------------
# No changes should be necessary below this line
#---------------------------------------------------------------------------
#-------------------------- SCSI scanners ----------------------------------
# These SCSI devices will be probed automatically
scsi AGFA * Scanner
scsi COLOR * Scanner
scsi Color * Scanner
scsi ACERPERI * Scanner
#--------------------------- USB scanners -----------------------------------
# These USB devices will be probed automatically
# (This will currently work only on Linux)
# Benq/Acer/Vuego 310U
usb 0x04a5 0x1a20
usb 0x04a5 0x1a26
# Benq/Acer/Vuego 320U
usb 0x04a5 0x2022
# Benq/Acer/Vuego 620U / 620UT
usb 0x04a5 0x1a2a
usb 0x04a5 0x2040
# Benq/Acer/Vuego 640U
usb 0x04a5 0x2060
# Benq/Acer/Vuego 640BU
usb 0x04a5 0x207e
# Benq/Acer/Vuego 1240U
usb 0x04a5 0x20c0
# Benq/Acer/Vuego 3300 / 4300
usb 0x04a5 0x20b0
# Benq/Acer/Vuego 4300
usb 0x04a5 0x20de
# Benq/Acer/Vuego 5000
usb 0x04a5 0x20fc
# Benq/Acer/Vuego 5300
usb 0x04a5 0x20fe
# Agfa 1236U
usb 0x06bd 0x0002
# Agfa 1212U
usb 0x06bd 0x0001
usb 0x06bd 0x2061
# Agfa Snapscan e10
usb 0x06bd 0x2093
# Agfa Snapscan e20
usb 0x06bd 0x2091
# Agfa Snapscan e25
usb 0x06bd 0x2095
# Agfa Snapscan e26
usb 0x06bd 0x2097
# Agfa Snapscan e40
usb 0x06bd 0x208d
# Agfa Snapscan e42
usb 0x06bd 0x20ff
# Agfa Snapscan e50
usb 0x06bd 0x208f
# Agfa Snapscan e52
usb 0x06bd 0x20fd
# Epson Perfection 660
usb 0x04b8 0x0114