mirror
/
sane-project-backends
kopia lustrzana https://gitlab.com/sane-project/backends
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
sane-project-backends/backend
Historia
Henning Geinitz 565aaa0639 Changed access control (function check host). Now IP addresses 
are used for comparison, not host names as before. It's possible to
put hostnames, FQDNs and IP addresses into saned.conf.
Limitations: Only the first IP address in struct hostent is checked.
IPv6 is untested. The change is based on a patch by Petter
Reinholdtsen <pere@hungry.com>.
Removed isfdtype to avoid compilation problems. Added more
debug output. Print function name in every DBG statement.
Updated manual pages and saned.conf.
 		2002-01-06 21:01:05 +00:00
..
Makefile.in Added implementation of inet_ntop() for platforms withouth this 2002-01-06 20:43:10 +00:00
abaton.c Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
abaton.conf Initial revision 1999-08-09 18:06:01 +00:00
abaton.desc Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
abaton.h Initial revision 1999-08-09 18:06:01 +00:00
agfafocus.c 2001-04-27 Henning Meier-Geinitz <henning@meier-geinitz.de> 2001-04-27 19:28:56 +00:00
agfafocus.conf Initial revision 1999-08-09 18:06:01 +00:00
agfafocus.desc Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
agfafocus.h Initial revision 1999-08-09 18:06:01 +00:00
apple.c Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
apple.conf Initial revision 1999-08-09 18:06:01 +00:00
apple.desc Updated URL. 2001-10-30 21:47:27 +00:00
apple.h Initial revision 1999-08-09 18:06:01 +00:00
artec.c 2001-05-26 Chris Pinkham <cpinkham@infi.net> 2001-05-26 21:50:47 +00:00
artec.conf Initial revision 1999-08-09 18:06:01 +00:00
artec.desc 2001-06-02 Chris Pinkham <cpinkham@infi.net> 2001-06-02 16:32:58 +00:00
artec.h Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
as6e.c 2000-12-05 Henning Meier-Geinitz <hmg@gmx.de> 2000-12-05 19:31:39 +00:00
as6e.desc Changed status to alpha because backend isn't new any more. 2001-05-26 09:42:30 +00:00
as6e.h 2000-12-05 Henning Meier-Geinitz <hmg@gmx.de> 2000-12-05 19:31:39 +00:00
avision.c Some fixes for the Avision backend. (Brightness and contrast via gamma-table 2000-11-15 19:07:56 +00:00
avision.conf Merged main branch with current DEVEL_1_9. 2000-03-05 13:57:25 +00:00
avision.desc Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
avision.h Some fixes for the Avision backend. (Brightness and contrast via gamma-table 2000-11-15 19:07:56 +00:00
bh.c Fixed config_line[len-1] bug which could generate an access 2001-05-31 18:01:39 +00:00
bh.conf 2001-01-17 Tom Martone <tom@martoneconsulting.com> 2001-01-20 23:42:12 +00:00
bh.desc 2001-09-17 Tom Martone <tom@martoneconsulting.com> 2001-09-18 00:18:22 +00:00
bh.h 2001-02-10 Tom Martone <tom@martoneconsulting.com> 2001-02-10 18:23:28 +00:00
canon-sane.c Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
canon-scsi.c Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
canon.c Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
canon.conf Added config file and some documentation for it. 2001-05-29 18:27:52 +00:00
canon.desc Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
canon.h Merged main branch with current DEVEL_1_9. 2000-03-05 13:57:25 +00:00
canon_pp-dev.c
…
canon_pp-dev.h
…
canon_pp.desc Fixed two wrong scanner names (from Matthew Duggan" <stauff@guarana.org>). 2001-10-30 21:30:08 +00:00
cderror.h Initial revision 1999-08-09 18:06:01 +00:00
cdjpeg.h Initial revision 1999-08-09 18:06:01 +00:00
coolscan-scsidef.h Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
coolscan.c Declared all internal functions static. 2001-06-04 16:14:11 +00:00
coolscan.conf Initial revision 1999-08-09 18:06:01 +00:00
coolscan.desc Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
coolscan.h Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
dc25.c Fixed race condition involving temp files. Removed some superfluous 2001-12-20 15:24:04 +00:00
dc25.conf Initial revision 1999-08-09 18:06:01 +00:00
dc25.desc Wiped old repository. Imported v1.0.1. 1999-08-09 18:06:01 +00:00
dc25.h Clean up compiler warnings and fix (minor) memory leak 2001-05-08 03:30:34 +00:00
dc210.c Fix compiler warnings 2001-10-10 13:11:07 +00:00
dc210.conf Initial revision 1999-08-09 18:06:01 +00:00
dc210.desc 2001-04-17 Henning Meier-Geinitz <hmg@gmx.de> 2001-04-17 19:45:27 +00:00
dc210.h fix compiler warnings 2001-10-10 13:15:01 +00:00
dc240.c Misc. bug fixes 2001-11-08 01:14:50 +00:00
dc240.conf 2001-04-07 Henning Meier-Geinitz <hmg@gmx.de> 2001-04-07 18:58:45 +00:00
dc240.desc Changes status from "new" to "alpha" 2001-09-16 18:23:57 +00:00
dc240.h
…
djpeg.README Merged main branch with current DEVEL_1_9. 2000-03-05 13:57:25 +00:00
djpeg.c Initial revision 1999-08-09 18:06:01 +00:00
dll.aliases Merged main branch with current DEVEL_1_9. 2000-03-05 13:57:25 +00:00
dll.c Added some debug messages (e.g. if dll.conf isn't found). Some adjustments concerning 2001-11-11 19:55:49 +00:00
dll.conf Added (commented out) st400 entry. 2001-12-19 21:30:20 +00:00
dll.desc Added some debug messages (e.g. if dll.conf isn't found). Some adjustments concerning 2001-11-11 19:55:49 +00:00
dmc.c Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
dmc.conf Initial revision 1999-08-09 18:06:01 +00:00
dmc.desc Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
dmc.h Initial revision 1999-08-09 18:06:01 +00:00
epson.c Disable TEST_IOCTL again, which was enabled by accident. 2002-01-06 20:46:00 +00:00
epson.conf Commented out the USB config entry. This can block other USB scanners from 2001-04-21 13:39:11 +00:00
epson.desc Fix for older Perfection 1650 scanners - their firmware only reports half 2001-10-20 18:43:37 +00:00
epson.h backend/epson.h: Removed black gamma table - only RGB is used, even for grayscale scans. 2002-01-05 16:24:19 +00:00
gphoto2.c debug print bug 2001-11-13 01:41:55 +00:00
gphoto2.conf
…
gphoto2.desc Still trying to get gphoto2.desc right 2001-10-10 00:21:44 +00:00
gphoto2.h Minor cosmetic changes 2001-10-16 00:27:31 +00:00
hp-accessor.c Use lassert.h instead of assert.h 2001-10-27 18:01:54 +00:00
hp-accessor.h Merged main branch with current DEVEL_1_9. 2000-03-05 13:57:25 +00:00
hp-device.c Use lassert.h instead of assert.h 2001-10-27 18:01:54 +00:00
hp-device.h - add support for active XPA 2001-09-04 13:51:11 +00:00
hp-handle.c Use lassert.h instead of assert.h 2001-10-27 18:01:54 +00:00
hp-handle.h Initial revision 1999-08-09 18:06:01 +00:00
hp-hpmem.c Use lassert.h instead of assert.h 2001-10-27 18:01:54 +00:00
hp-option.c Use lassert.h instead of assert.h 2001-10-27 18:01:54 +00:00
hp-option.h - add support for active XPA 2001-09-04 13:51:11 +00:00
hp-scl.c Use lassert.h instead of assert.h 2001-10-27 18:01:54 +00:00
hp-scl.h - add support for active XPA 2001-09-04 13:51:11 +00:00
hp-scsi.h hp-backend V 0.91, 04-Sep-2000, David Paschal (paschal@rcsis.com): 2000-09-09 17:44:14 +00:00
hp.README Initial revision 1999-08-09 18:06:01 +00:00
hp.TODO Merged main branch with current DEVEL_1_9. 2000-03-05 13:57:25 +00:00
hp.c - add support for active XPA 2001-09-04 13:51:11 +00:00
hp.conf Initial revision 1999-08-09 18:06:01 +00:00
hp.desc Add support for OfficeJet PSC 900 series 2001-10-21 16:24:02 +00:00
hp.h - add support for active XPA 2001-09-04 13:51:11 +00:00
hp4200.desc Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
ibm.desc Removed old entry. 2001-10-09 17:47:01 +00:00
jinclude.h Initial revision 1999-08-09 18:06:01 +00:00
lhii.desc Updated with current version and contact information. 2001-05-14 08:39:35 +00:00
m3091.desc Updated URL. 2001-10-30 21:47:27 +00:00
m3096g-scsi.h Update (from Oliver Schirrmeister <oschirr@abm.de>). Added: Support for ipc2/3 2001-10-10 21:50:24 +00:00
m3096g.c Update (from Oliver Schirrmeister <oschirr@abm.de>). Added: Support for ipc2/3 2001-10-10 21:50:24 +00:00
m3096g.conf Merged main branch with current DEVEL_1_9. 2000-03-05 13:57:25 +00:00
m3096g.desc Updated URL. 2001-10-30 21:47:27 +00:00
m3096g.h Update (from Oliver Schirrmeister <oschirr@abm.de>). Added: Support for ipc2/3 2001-10-10 21:50:24 +00:00
microtek.c o Added support for Agfa StudioStar (weird pixel packing) 2001-05-23 22:50:26 +00:00
microtek.conf Merged main branch with current DEVEL_1_9. 2000-03-05 13:57:25 +00:00
microtek.desc Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
microtek.h o Added support for Agfa StudioStar (weird pixel packing) 2001-05-23 22:50:26 +00:00
microtek2.c Updated microtek2 backend to build 2001-10-24 20:35:12 +00:00
microtek2.conf Initial revision 1999-08-09 18:06:01 +00:00
microtek2.desc Wiped old repository. Imported v1.0.1. 1999-08-09 18:06:01 +00:00
microtek2.h Wiped old repository. Imported v1.0.1. 1999-08-09 18:06:01 +00:00
mustek.c Wiped old repository. Imported v1.0.1. 1999-08-09 18:06:01 +00:00
mustek.conf Fixed problem with SCSI command queuing. Fixed problem that 2001-07-09 18:18:58 +00:00
mustek.desc Fixed a possible segfault in sane_control_option. Added more 2001-12-15 12:08:45 +00:00
mustek.h Added OS/2 compatibility fixes (from "Franz Bakan" <fbakan@gmx.net>). 2001-11-22 20:24:40 +00:00
mustek_pp.c 2001-05-26 Jochen Eisinger <jochen.eisinger@gmx.net> 2001-05-26 23:02:11 +00:00
mustek_pp.conf 2001-10-14 Jochen Eisinger <jochen.eisinger@gmx.de> 2001-10-14 15:58:27 +00:00
mustek_pp.desc 2001-05-25 Jochen Eisinger <jochen.eisinger@gmx.net> 2001-05-25 16:11:15 +00:00
mustek_pp.h 2000-11-19 Jochen Eisinger <jochen.eisinger@gmx.net> 2000-11-19 16:17:38 +00:00
mustek_usb.c Made usb_low_read_rows more robust. Limited maximum block size and 2001-12-22 18:33:48 +00:00
mustek_usb.conf Made usb_low_read_rows more robust. Limited maximum block size and 2001-12-22 18:33:48 +00:00
mustek_usb.desc Made usb_low_read_rows more robust. Limited maximum block size and 2001-12-22 18:33:48 +00:00
mustek_usb.h FreeBSD is supported to some degree now. Started 1200 USB support. 2001-11-15 21:28:40 +00:00
mustek_usb_high.c FreeBSD is supported to some degree now. Started 1200 USB support. 2001-11-15 21:28:40 +00:00
mustek_usb_high.h FreeBSD is supported to some degree now. Started 1200 USB support. 2001-11-15 21:28:40 +00:00
mustek_usb_low.c Made usb_low_read_rows more robust. Limited maximum block size and 2001-12-22 18:33:48 +00:00
mustek_usb_low.h Made usb_low_read_rows more robust. Limited maximum block size and 2001-12-22 18:33:48 +00:00
mustek_usb_mid.c FreeBSD is supported to some degree now. Started 1200 USB support. 2001-11-15 21:28:40 +00:00
mustek_usb_mid.h FreeBSD is supported to some degree now. Started 1200 USB support. 2001-11-15 21:28:40 +00:00
nec.c Update to backend version 0.12 (from Kazuya Fukuda <kazuya@pjs.nevt.nec.co.jp>). 2001-06-02 12:49:47 +00:00
nec.conf 2000-11-21 Henning Meier-Geinitz <hmg@gmx.de> 2000-11-21 01:03:33 +00:00
nec.desc Update to backend version 0.12 (from Kazuya Fukuda <kazuya@pjs.nevt.nec.co.jp>). 2001-06-02 12:49:47 +00:00
nec.h Update to backend version 0.12 (from Kazuya Fukuda <kazuya@pjs.nevt.nec.co.jp>). 2001-06-02 12:49:47 +00:00
net.c Fixed race condition between saned sending NET_OPEN reply 2002-01-05 11:35:22 +00:00
net.conf Initial revision 1999-08-09 18:06:01 +00:00
net.desc Fixed race condition between saned sending NET_OPEN reply 2002-01-05 11:35:22 +00:00
net.h Fixed some memory leaks. A bit of reformating. Added more 2001-05-13 16:23:48 +00:00
pie-scsidef.h Added backend for Pacific Image Electronics ScanAce scanners (also works with DevCom BlackWidow 2000-11-13 10:50:41 +00:00
pie.c Changes to make AdLib JetScan scanners work - was using incorrect case in 2001-09-17 20:57:12 +00:00
pie.conf Changes to make AdLib JetScan scanners work - was using incorrect case in 2001-09-17 20:57:12 +00:00
pie.desc Added backend for Pacific Image Electronics ScanAce scanners (also works with DevCom BlackWidow 2000-11-13 10:50:41 +00:00
pint.c Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
pint.desc Merged main branch with current DEVEL_1_9. 2000-03-05 13:57:25 +00:00
pint.h Initial revision 1999-08-09 18:06:01 +00:00
plustek-devs.c Updated/added Plustek files to support LM9831/2 based scanner. 2001-12-29 15:34:03 +00:00
plustek-pp.c Updated/added Plustek files to support LM9831/2 based scanner. 2001-12-29 15:34:03 +00:00
plustek-share.h Updated/added Plustek files to support LM9831/2 based scanner. 2001-12-29 15:34:03 +00:00
plustek-usb.c Fixed bug in lineart scaling and made brightness adjustment work. 2001-12-30 13:35:48 +00:00
plustek-usb.h Fixed bug in lineart scaling and made brightness adjustment work. 2001-12-30 13:35:48 +00:00
plustek-usbhw.c Updated/added Plustek files to support LM9831/2 based scanner. 2001-12-29 15:34:03 +00:00
plustek-usbimg.c Fixed bug in lineart scaling and made brightness adjustment work. 2001-12-30 13:35:48 +00:00
plustek-usbio.c Updated/added Plustek files to support LM9831/2 based scanner. 2001-12-29 15:34:03 +00:00
plustek-usbmap.c Fixed bug in lineart scaling and made brightness adjustment work. 2001-12-30 13:35:48 +00:00
plustek-usbscan.c Updated/added Plustek files to support LM9831/2 based scanner. 2001-12-29 15:34:03 +00:00
plustek-usbshading.c Updated/added Plustek files to support LM9831/2 based scanner. 2001-12-29 15:34:03 +00:00
plustek.c Updated/added Plustek files to support LM9831/2 based scanner. 2001-12-29 15:34:03 +00:00
plustek.conf Updated/added Plustek files to support LM9831/2 based scanner. 2001-12-29 15:34:03 +00:00
plustek.desc Updated/added Plustek files to support LM9831/2 based scanner. 2001-12-29 15:34:03 +00:00
plustek.h Updated/added Plustek files to support LM9831/2 based scanner. 2001-12-29 15:34:03 +00:00
pnm.c Make sure that *length=0 in sane_read(). Added more debug output. 2001-09-18 12:57:16 +00:00
pnm.c-bad Initial revision 1999-08-09 18:06:01 +00:00
pnm.desc Make sure that *length=0 in sane_read(). Added more debug output. 2001-09-18 12:57:16 +00:00
qcam.c Another occurence where struct flock must be defined for OS/2. 2001-06-02 14:33:32 +00:00
qcam.conf Initial revision 1999-08-09 18:06:01 +00:00
qcam.desc Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
qcam.h Initial revision 1999-08-09 18:06:01 +00:00
ricoh-scsi.c Initial revision 1999-08-09 18:06:01 +00:00
ricoh.c Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
ricoh.conf Initial revision 1999-08-09 18:06:01 +00:00
ricoh.desc Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
ricoh.h Merged main branch with current DEVEL_1_9. 2000-03-05 13:57:25 +00:00
s9036.c Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
s9036.conf Initial revision 1999-08-09 18:06:01 +00:00
s9036.desc Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
s9036.h Initial revision 1999-08-09 18:06:01 +00:00
sane_strstatus.c Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
saned.conf Changed access control (function check host). Now IP addresses 2002-01-06 21:01:05 +00:00
sharp.c backend/sharp.c: added an additional check to prevent OS/2 from using 2001-11-26 22:06:30 +00:00
sharp.conf Merged main branch with current DEVEL_1_9. 2000-03-05 13:57:25 +00:00
sharp.desc Added link to sane-sharp manual page. 2001-10-09 19:13:31 +00:00
sharp.h forgotten update to sharp.h committed 2000-11-22 10:25:37 +00:00
sm3600-color.c build 3 of sm3600 2001-05-29 19:43:05 +00:00
sm3600-gray.c build 3 of sm3600 2001-05-29 19:43:05 +00:00
sm3600-homerun.c sm3600: <marian@freenet-ag.de> better calibration and fixed non-statics 2001-05-30 22:35:46 +00:00
sm3600-scanmtek.c build 3 of sm3600 2001-05-29 19:43:05 +00:00
sm3600-scantool.h build 3 of sm3600 2001-05-29 19:43:05 +00:00
sm3600-scanusb.c build 3 of sm3600 2001-05-29 19:43:05 +00:00
sm3600-scanutil.c build 3 of sm3600 2001-05-29 19:43:05 +00:00
sm3600.c sm3600: <marian@freenet-ag.de> better calibration and fixed non-statics 2001-05-30 22:35:46 +00:00
sm3600.desc Changed status to :alpha. 2001-10-09 18:41:18 +00:00
sm3600.h build 3 of sm3600 2001-05-29 19:43:05 +00:00
snapscan-scsi.c Update to snapscan-20011212 (snapscan 1.4.3) 2001-12-17 22:51:52 +00:00
snapscan-sources.c Update to snapscan-20011212 (snapscan 1.4.3) 2001-12-17 22:51:52 +00:00
snapscan-sources.h Update to snapscan-20011212 (snapscan 1.4.3) 2001-12-17 22:51:52 +00:00
snapscan-usb.c Update to snapscan-20011212 (snapscan 1.4.3) 2001-12-17 22:51:52 +00:00
snapscan-usb.h Update to snapscan-20011212 (snapscan 1.4.3) 2001-12-17 22:51:52 +00:00
snapscan-utils.c Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
snapscan.c Update to snapscan-20011221 (snapscan 1.4.3) 2001-12-20 23:22:52 +00:00
snapscan.conf Make /dev/sga the default device in snapscan.conf 2001-10-26 20:04:55 +00:00
snapscan.desc Update to snapscan-20011212 (snapscan 1.4.3) 2001-12-17 22:51:52 +00:00
snapscan.h Update to snapscan-20011221 (snapscan 1.4.3) 2001-12-20 23:22:52 +00:00
sp15c-scsi.h Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
sp15c.c Fixed config_line[len-1] bug which could generate an access 2001-05-31 18:01:39 +00:00
sp15c.conf Merged main branch with current DEVEL_1_9. 2000-03-05 13:57:25 +00:00
sp15c.desc Updated URL. 2001-10-30 21:47:27 +00:00
sp15c.h Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
st400.c Security fix from Tim Waugh. Dump inquiry data to $HOME/st400.dump 2001-12-18 11:37:01 +00:00
st400.conf Security fix from Tim Waugh. Dump inquiry data to $HOME/st400.dump 2001-12-18 11:37:01 +00:00
st400.desc Security fix from Tim Waugh. Dump inquiry data to $HOME/st400.dump 2001-12-18 11:37:01 +00:00
st400.h Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
stubs.c Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
tamarack.c bug in the Solaris/Schilling driver part of sanei/sanei_scsic 2001-02-26 23:01:43 +00:00
tamarack.conf Initial revision 1999-08-09 18:06:01 +00:00
tamarack.desc Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
tamarack.h Initial revision 1999-08-09 18:06:01 +00:00
template.desc. Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
umax-scanner.c 2002-01-05 Oliver Rauch <Oliver.Rauch@rauch-domain.de> 2002-01-05 17:23:53 +00:00
umax-scanner.h umax backend update to version 1.0 build 25 2001-03-04 22:05:41 +00:00
umax-scsidef.h 2001-10-17 Oliver Rauch <Oliver.Rauch@rauch-domain.de> 2001-10-27 11:58:09 +00:00
umax-uc630.c umax backend update to version 1.0 build 25 2001-03-04 22:05:41 +00:00
umax-uc840.c umax backend update to version 1.0 build 25 2001-03-04 22:05:41 +00:00
umax-uc1200s.c umax backend update to version 1.0 build 25 2001-03-04 22:05:41 +00:00
umax-uc1200se.c umax backend update to version 1.0 build 25 2001-03-04 22:05:41 +00:00
umax-uc1260.c 2001-06-17 Oliver Rauch <Oliver.Rauch@rauch-domain.de> 2001-06-17 22:49:17 +00:00
umax-ug80.c umax backend update to version 1.0 build 25 2001-03-04 22:05:41 +00:00
umax-ug630.c umax backend update to version 1.0 build 25 2001-03-04 22:05:41 +00:00
umax.c 2002-01-05 Oliver Rauch <Oliver.Rauch@rauch-domain.de> 2002-01-05 17:23:53 +00:00
umax.conf 2002-01-05 Oliver Rauch <Oliver.Rauch@rauch-domain.de> 2002-01-05 17:23:53 +00:00
umax.desc 2002-01-05 Oliver Rauch <Oliver.Rauch@rauch-domain.de> 2002-01-05 17:23:53 +00:00
umax.h 2002-01-05 Oliver Rauch <Oliver.Rauch@rauch-domain.de> 2002-01-05 17:23:53 +00:00
umax1220u.desc New file (from Marcio Luis Teixeira <marciot@holly.colostate.edu>). 2001-09-18 12:44:56 +00:00
umax_pp.c
…
umax_pp.conf
…
umax_pp.desc * changed status from :new to :beta 2001-09-18 05:01:03 +00:00
umax_pp.h
…
umax_pp_low.c
…
umax_pp_low.h
…
umax_pp_mid.c
…
umax_pp_mid.h
…
v4l-frequencies.h Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
v4l-grab.h Remove some compiler warnings. 2000-09-19 03:48:08 +00:00
v4l.c Get rid of small memory leak when using 'scanimage -L'. 2001-02-12 19:31:01 +00:00
v4l.conf Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
v4l.desc Merge devel (v1.0.3) into head branch. 2000-08-12 15:11:46 +00:00
v4l.h Remove some compiler warnings. 2000-09-19 03:48:08 +00:00
v4l2.desc Merged main branch with current DEVEL_1_9. 2000-03-05 13:57:25 +00:00