kopia lustrzana https://gitlab.com/sane-project/backends
234 wiersze
8.9 KiB
Plaintext
234 wiersze
8.9 KiB
Plaintext
V 1.0-30 (2002-11-13)
|
|
|
|
- Added basic support for Plustek OpticPro 1248U (from Gerhard Jaeger
|
|
<gerhard@gjaeger.de>). Only gray mode without calib seems to work until
|
|
now.
|
|
- Removed 50 and 1200 dpi from Lexmark X73 (doesn't seem to work). Decreased
|
|
height.
|
|
- Backend status is BETA now.
|
|
|
|
V 1.0-29 (2002-11-07)
|
|
|
|
- Changed option titles and descriptions to make them better readable.
|
|
- Added translation markers for all options.
|
|
- Added German translation for backend options.
|
|
- Updated manpage and .desc file concerning scanner status.
|
|
- Added untested flag for Mustek ScanEpress A3 USB and Lexmark X73.
|
|
|
|
V 1.0-28 (2002-10-31)
|
|
|
|
- Reduce scan width of 2400 TA Plus: otherwise the black mark would create
|
|
light vertical stripes.
|
|
- Removed default parameters. Set AFE and exposure in every model struct.
|
|
- Faster automatic gain setting for the CIS scanners. The default values from
|
|
the model struct and the last values are used for calculation.
|
|
- Set default AFE values for ScanExpress 1200 UB Plus, BearPaw 1200 CU, BearPaw
|
|
2400 CU Plus.
|
|
|
|
V 1.0-27 (2002-10-25)
|
|
|
|
- Bugfix: override applies to all devices found by the last usb line.
|
|
- Individual resolutions + depth values for every scanner.
|
|
- Bugfix: Mirroring code had an off-by-one error (garbage in the first column).
|
|
- Artec Ultima 2000, MD 9385: Removed 1200 dpi mode (doesn't seem to work?),
|
|
added 100 and 200 dpi modes. Renamed model to Artec Ultima 2000, because
|
|
that's probably the "father" of all the clones.
|
|
- Mustek BearPaw 1200 CU: Added 200 dpi mode.
|
|
- Added manual page.
|
|
- Removed override for Packard Bell (seems to be exact Bearpaw 1200 CU Plus
|
|
clone).
|
|
- Removed override for Trust Copmact Scan and Medion/Tevion/Lifetec LT 9452
|
|
(Mustek ScanExpress 1200 UB Plus clones).
|
|
- Removed override for Tevion MD 9458 (seems to be an Artec Ultima 2000 (e +?)
|
|
clone).
|
|
|
|
V 1.0-26 (2002-10-22)
|
|
|
|
- Several fixes for Medion MD-9385 and Artec Ultima 2000 based scanners. The
|
|
Cytron MD 9385 works now.
|
|
- Diabled Plustek-like firmware check again, didn't work for MD 9385.
|
|
- Splitted flags for mirror_x and sset_home.
|
|
|
|
V 1.0-25 (2002-10-20)
|
|
|
|
- Fixed segfault for GT-6801 based scanners.
|
|
- Added override for Medion MD9385.
|
|
- Changed firmware detection code for Plustek scanners.
|
|
- CIS autogain seraches max white and min black now (removed segment code).
|
|
Hopefully no more vertical stripes.
|
|
- Adjusted ScanExpress 1200 UB Plus and BearPaw 1200 CU geometry and white
|
|
strip.
|
|
|
|
V 1.0-24 (2002-10-12)
|
|
|
|
- Added "override" keyword for gt68xx.conf. So model settings can be changed
|
|
at run-time. If set up correctly, firmware lines aren't necessary any more.
|
|
- Added support for the Mustek BearPaw 2400 CU.
|
|
- Tevion hack (now enabled by override option) also mirrors coordinates.
|
|
- Mustek BearPaw 1200 TA 1200 dpi is set up for the Windows firmware again.
|
|
- Added some basic I18N markers.
|
|
- Removed option backtrack (setup automatically now).
|
|
|
|
V 1.0-23 (2002-10-10),
|
|
|
|
- Added detection of Mustek BearPaw A3 USB.
|
|
- Added auto-detection of lamp status for CCD scanners (from David Stevenson).
|
|
No wait for the fixed time of 40 seconds any more.
|
|
- The scan slider of the GT-6816 bsed scanners don't move home after
|
|
calibration/gain. TA mode is faster therefore.
|
|
- Added hack for Tevion MD 9458 to solve the mirror and "scan-slider doesn't
|
|
come home" problems.
|
|
- Fixed BearPaw 1200 TA 1200 dpi problem.
|
|
- Fixed manual firmware selection in gt68xx.conf.
|
|
- Added warning if power supply isn't ok.
|
|
|
|
V 1.0-22 (2002-10-07),
|
|
|
|
- Mustek Bearpaw 2400 CU Plus works in gray mode again
|
|
- Line calibration uses the bit depth of the main scan now.
|
|
- Vendor, product ids and other information is printed when debugging is active
|
|
- Fixed segfault in attach ().
|
|
- Fixed endianess issues (untested).
|
|
- Code cleanup.
|
|
|
|
V 1.0-21 (2002-10-07),
|
|
|
|
- Added 12 bit modes for all scanners (Sergey Vlasov).
|
|
- Fixed 2400 TA Plus in 12/16 bit modes in 1200/2400 dpi.
|
|
- Disable depth option in lineart mode and for some scanners in gray mode.
|
|
- Scan preview in 8 bit.
|
|
|
|
V 1.0-20 (2002-10-06)
|
|
|
|
- Calibration of the CCD scanners in gray mode should work better now.
|
|
- Added 50 dpi mode for BearPaw 2400 TA Plus. Faster preview.
|
|
- By default, /usr/local/share/sane/gt68xx/ is checked for firmware files.
|
|
Manual adjustment is only necessary if the firmware name is different from
|
|
default or at a different path.
|
|
- Mixed and lower-case is tried when loading the firmware.
|
|
- Adjusted geometry of BearPaw 1200 TA and 2400 TA.
|
|
- Automatic gain fixes for TA mode.
|
|
- Don't show "lamp off" option for CIS scanners.
|
|
|
|
V 1.0-19 (2002-10-01)
|
|
|
|
- Various minor fixes and adjustments concerning calibration.
|
|
- Fixed sane_open detection of already known devices.
|
|
- Added missing usleep for 2400 CU Plus.
|
|
- Adjusted scan area for 1200 TA.
|
|
- Removed detection of Artec Umltima 2000 (product id 0x4001) as this is not
|
|
a GT-68xx based scanner.
|
|
- Fixed some compilation warnings.
|
|
- Minor misc fixes.
|
|
|
|
V 1.0-18 (2002-10-01)
|
|
|
|
- Added detection of Artec Ultima 2000.
|
|
- Updated Lexmark X70 settings.
|
|
- Fixed segfault that occured when no device was detected.
|
|
- Changed test for loaded firmware for GT-6801 scanners.
|
|
|
|
V 1.0-17 (2002-10-01)
|
|
|
|
- Added support for the Lexmark X70 and X73 scanners
|
|
- Fixed shifted columns problem for BearPaw 2400 TA Plus and maybe 2400 TA.
|
|
- Fixed y-margin for the BearPaw 1200 TA (at least I hope so)
|
|
- Fixed BearPaw 2400 CU Plus firmware name
|
|
- Removed gt68xx_test program from distribution. Didn't work anymore anyway.
|
|
|
|
V 1.0-16 (2002-09-29)
|
|
|
|
- Added calibration and auto-gain support for transparency adapter mode.
|
|
- In transparency adapter mode, only the usable scan area is shown.
|
|
- Autogain is repeated when source was change.d
|
|
- Fixed geometry of ScanExpress 1200 UB Plus.
|
|
- Fixed freeze at the end of scan for GT-6801-based scanners.
|
|
|
|
V 1.0-15 (2002-09-27)
|
|
|
|
- Low level reading is done in a separate process now (shm is back). Some
|
|
scanners should be faster therefore.
|
|
- Added option "force backtracking". If disabled, no backtracking occurs
|
|
(->faster, but lines are lost).
|
|
- Fixed hang in reader_process.
|
|
- Fixed "auto gain once" (which really worked only once :-/)
|
|
|
|
V 1.0-14 (2002-09-25)
|
|
|
|
- Added basic transaprency adapter support for the Mustek Bearpaw 2400 TA
|
|
Plus. Other TA models may work also. No calibration or other nice features,
|
|
just pure external lamp on, internal lamp of.
|
|
- Support for the Mustek BearPaw 1200 Cu Plus (hopefully).
|
|
- Added Lineart (black/white) mode.
|
|
- Added warming-up for CCD lamps and an option to disable shutting off the
|
|
lamp.
|
|
- Print scanning time (debug level 3).
|
|
- Removed "safe preview". Not longer necessary.
|
|
|
|
V 1.0-13 (2002-09-25)
|
|
|
|
- Major rewrite of the low level scan setup functions. Probably has broken
|
|
some of the supported scanners.
|
|
- Geometry in the model struct is in mm now. Values for most scanners are
|
|
untested.
|
|
- Added support for Mustek Bearpaw 2400 CU Plus.
|
|
- CCD lamp is turned on when opening the frontend and turned off when leaving.
|
|
- Auto gain is done only for the first scan.
|
|
- Manual gain etc. options don't show up in automatic mode.
|
|
- Faster automatic gain.
|
|
- Bugfixes: gain/offset options, moving top-margin and exposure control.
|
|
|
|
V 1.0-12 (2002-09-23)
|
|
|
|
- Fixed bug concerning too little data transferred in sane_read.
|
|
- Added detection of the Packard Bell Diamond 1200.
|
|
- Changed some scanner names and added support for custom names in config file.
|
|
- Use the size of the scan area in the model struct. This value may need
|
|
some tweaking for the gt6816 scanners.
|
|
- Fixed the size of scanarea for the BearPaw 1200 CU/ScanEpress 1200 UB Plus
|
|
- Disabled 16 bit mode for GT-6801 scanners. This isn't even supported by the
|
|
Windows driver.
|
|
- General code cleanup. Removed gt68xx_mustek.c and SHM support.
|
|
- Made the .tar.gz file size smaller.
|
|
|
|
V 1.0-11 (2002-09-22)
|
|
|
|
- 1200 dpi works now at least for the BearPaw 1200 CU. Maybe also for the
|
|
other scanners.
|
|
- Added manual and automatic offset/gain/exposure control for the CIS
|
|
scanners. The image should be better now.
|
|
- Added debug option to scan the full scan area including the calibration
|
|
strip.
|
|
|
|
V 1.0-10 (2002-09-18)
|
|
|
|
- 50, 75, 150, 300, 600 work now for the GT6801 scanners
|
|
- Preview is fast again (can be set to safe/slow mode)
|
|
- Calibration can be disabled by option
|
|
- Added some more safety checks for USB commands
|
|
- The gt68xx_test program can be used again
|
|
|
|
V 1.0-9 (2002-09-17)
|
|
|
|
- Added option to disable automatic gain (->less ugly colors for GT-6801
|
|
based models)
|
|
- Fixed segfault that occured when a scan was cancelled
|
|
- Preview uses slow but safe (?) 300 dpi 8 bit modes now
|
|
- Fixed bug concerning X0/Y0 coordinates
|
|
- Started implementing dpeth option (doesn't work yet)
|
|
- Internal changes (use high_scan's wait_for_positioning)
|
|
|
|
V 1.0-8 (2002-09-16)
|
|
|
|
- Fixed distortion problem in color mode
|
|
- Selected safer default option values
|
|
- Changed file names to be more appropriate for SANE
|
|
|
|
V 1.0-7 (2002-09-16)
|
|
|
|
- Initial version based on Sergey Vlasov's gt68xx backend v 0.0.6
|
|
- Added basic SANE interface in gt68xx.c
|
|
- Added SANE options and SANE variables to gt68xx_high.h
|
|
- Minor adjustments to gt68xx_low.h
|
|
- Added support for Mustek BearPaw 2400 TA Plus
|