mirror
/
sane-project-backends
kopia lustrzana https://gitlab.com/sane-project/backends
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
sane-project-backends/backend/genesys_gl843.c

4478 wiersze
118 KiB
C
Czysty Wina Historia

/* sane - Scanner Access Now Easy.
Copyright (C) 2010-2013 Stéphane Voltz <stef.dev@free.fr>
This file is part of the SANE package.
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston,
MA 02111-1307, USA.
As a special exception, the authors of SANE give permission for
additional uses of the libraries contained in this release of SANE.
The exception is that, if you link a SANE library with other files
to produce an executable, this does not by itself cause the
resulting executable to be covered by the GNU General Public
License. Your use of that executable is in no way restricted on
account of linking the SANE library code into it.
This exception does not, however, invalidate any other reasons why
the executable file might be covered by the GNU General Public
License.
If you submit changes to SANE to the maintainers to be included in
a subsequent release, you agree by submitting the changes that
those changes may be distributed with this exception intact.
If you write modifications of your own for SANE, it is your choice
whether to permit this exception to apply to your modifications.
If you do not wish that, delete this exception notice.
*/
#undef BACKEND_NAME
#define BACKEND_NAME genesys_gl843
#include "genesys_gl843.h"
/****************************************************************************
Low level function
****************************************************************************/
/* ------------------------------------------------------------------------ */
/* Read and write RAM, registers and AFE */
/* ------------------------------------------------------------------------ */
/**
* Write bulk data (e.g. gamma or shading data) */
static SANE_Status
gl843_bulk_write_data (Genesys_Device * dev, uint8_t addr,
uint8_t * data, size_t len)
{
SANE_Status status;
size_t size;
uint8_t outdata[8];
DBGSTART;
DBG (DBG_io, "gl843_bulk_write_data writing %lu bytes\n", (u_long) len);
status =
sanei_usb_control_msg (dev->dn, REQUEST_TYPE_OUT, REQUEST_REGISTER,
VALUE_SET_REGISTER, INDEX, 1, &addr);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_bulk_write_data failed while setting register: %s\n",
sane_strstatus (status));
return status;
}
while (len)
{
if(len>65472)
size=65472;
else
size = len;
outdata[0] = BULK_OUT;
outdata[1] = BULK_RAM;
outdata[2] = 0x00;
outdata[3] = 0x00;
outdata[4] = (size & 0xff);
outdata[5] = ((size >> 8) & 0xff);
outdata[6] = ((size >> 16) & 0xff);
outdata[7] = ((size >> 24) & 0xff);
status =
sanei_usb_control_msg (dev->dn, REQUEST_TYPE_OUT, REQUEST_BUFFER,
VALUE_BUFFER, INDEX, sizeof (outdata),
outdata);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_bulk_write_data failed while writing command: %s\n",
sane_strstatus (status));
return status;
}
status = sanei_usb_write_bulk (dev->dn, data, &size);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_bulk_write_data failed while writing bulk data: %s\n",
sane_strstatus (status));
return status;
}
DBG (DBG_io2,
"gl843_bulk_write_data: wrote %lu bytes, %lu remaining\n",
(u_long) size, (u_long) (len - size));
len -= size;
data += size;
}
DBGCOMPLETED;
return status;
}
/* Set address for writing data */
static SANE_Status
gl843_set_buffer_address (Genesys_Device * dev, uint32_t addr)
{
SANE_Status status;
DBG (DBG_io, "gl843_set_buffer_address: setting address to 0x%05x\n",
addr & 0xffff);
status = sanei_genesys_write_register (dev, 0x5b, ((addr >> 8) & 0xff));
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_set_buffer_address: failed while writing high byte: %s\n",
sane_strstatus (status));
return status;
}
status = sanei_genesys_write_register (dev, 0x5c, (addr & 0xff));
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_set_buffer_address: failed while writing low byte: %s\n",
sane_strstatus (status));
return status;
}
DBG (DBG_io, "gl843_set_buffer_address: completed\n");
return status;
}
/**
* writes a block of data to RAM
* @param dev USB device
* @param addr RAM address to write to
* @param size size of the chunk of data
* @param data pointer to the data to write
*/
static SANE_Status
write_data (Genesys_Device * dev, uint32_t addr, uint32_t size,
uint8_t * data)
{
SANE_Status status = SANE_STATUS_GOOD;
DBGSTART;
status = gl843_set_buffer_address (dev, addr);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"write_data: failed while setting address for bulk write data: %s\n",
sane_strstatus (status));
return status;
}
/* write actual data */
status = gl843_bulk_write_data (dev, 0x28, data, size);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"write_data: failed while writing bulk write data: %s\n",
sane_strstatus (status));
return status;
}
/* set back address to 0 */
status = gl843_set_buffer_address (dev, 0);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"write_data: failed setting to default RAM address: %s\n",
sane_strstatus (status));
return status;
}
DBGCOMPLETED;
return status;
}
static SANE_Status
gl843_bulk_read_data (Genesys_Device * dev, uint8_t addr,
uint8_t * data, size_t len)
{
SANE_Status status;
size_t size;
uint8_t outdata[8];
DBGSTART;
DBG (DBG_io,
"gl843_bulk_read_data: requesting %lu bytes from 0x%02x addr\n",
(u_long) len, addr);
status =
sanei_usb_control_msg (dev->dn, REQUEST_TYPE_OUT, REQUEST_REGISTER,
VALUE_SET_REGISTER, 0, 1, &addr);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"write_data: failed to set register address %s\n",
sane_strstatus (status));
return status;
}
if (len == 0)
return SANE_STATUS_GOOD;
outdata[0] = BULK_IN;
outdata[1] = BULK_RAM;
outdata[2] = VALUE_BUFFER;
outdata[3] = 0;
outdata[4] = (len & 0xff);
outdata[5] = ((len >> 8) & 0xff);
outdata[6] = ((len >> 16) & 0xff);
outdata[7] = ((len >> 24) & 0xff);
status =
sanei_usb_control_msg (dev->dn, REQUEST_TYPE_OUT, REQUEST_BUFFER,
VALUE_BUFFER, INDEX, sizeof (outdata), outdata);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_bulk_read_data failed while writing command: %s\n",
sane_strstatus (status));
return status;
}
while (len)
{
if (len > 0xF000)
size = 0xF000;
else
size = len;
if (size >= 512)
{
size /= 512;
size *= 512;
}
DBG (DBG_io2,
"gl843_bulk_read_data: trying to read %lu bytes of data\n",
(u_long) size);
status = sanei_usb_read_bulk (dev->dn, data, &size);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_bulk_read_data failed while reading bulk data: %s\n",
sane_strstatus (status));
return status;
}
DBG (DBG_io2,
"gl843_bulk_read_data read %lu bytes, %lu remaining\n",
(u_long) size, (u_long) (len - size));
len -= size;
data += size;
}
DBGCOMPLETED;
return SANE_STATUS_GOOD;
}
/****************************************************************************
Mid level functions
****************************************************************************/
static SANE_Bool
gl843_get_fast_feed_bit (Genesys_Register_Set * regs)
{
Genesys_Register_Set *r = NULL;
r = sanei_genesys_get_address (regs, REG02);
if (r && (r->value & REG02_FASTFED))
return SANE_TRUE;
return SANE_FALSE;
}
static SANE_Bool
gl843_get_filter_bit (Genesys_Register_Set * regs)
{
Genesys_Register_Set *r = NULL;
r = sanei_genesys_get_address (regs, REG04);
if (r && (r->value & REG04_FILTER))
return SANE_TRUE;
return SANE_FALSE;
}
static SANE_Bool
gl843_get_lineart_bit (Genesys_Register_Set * regs)
{
Genesys_Register_Set *r = NULL;
r = sanei_genesys_get_address (regs, REG04);
if (r && (r->value & REG04_LINEART))
return SANE_TRUE;
return SANE_FALSE;
}
static SANE_Bool
gl843_get_bitset_bit (Genesys_Register_Set * regs)
{
Genesys_Register_Set *r = NULL;
r = sanei_genesys_get_address (regs, REG04);
if (r && (r->value & REG04_BITSET))
return SANE_TRUE;
return SANE_FALSE;
}
static SANE_Bool
gl843_get_gain4_bit (Genesys_Register_Set * regs)
{
Genesys_Register_Set *r = NULL;
r = sanei_genesys_get_address (regs, REG06);
if (r && (r->value & REG06_GAIN4))
return SANE_TRUE;
return SANE_FALSE;
}
/**
* compute the step multiplier used
*/
static int
gl843_get_step_multiplier (Genesys_Register_Set * regs)
{
Genesys_Register_Set *r = NULL;
int value = 1;
r = sanei_genesys_get_address (regs, REG9D);
if (r != NULL)
{
switch (r->value & 0x0c)
{
case 0x04:
value = 2;
break;
case 0x08:
value = 4;
break;
default:
value = 1;
}
}
DBG (DBG_io, "%s: step multiplier is %d\n", __func__, value);
return value;
}
static SANE_Bool
gl843_test_buffer_empty_bit (SANE_Byte val)
{
if (val & REG41_BUFEMPTY)
return SANE_TRUE;
return SANE_FALSE;
}
static SANE_Bool
gl843_test_motor_flag_bit (SANE_Byte val)
{
if (val & REG41_MOTORENB)
return SANE_TRUE;
return SANE_FALSE;
}
/** @brief sensor profile
* search for the database of motor profiles and get the best one. Each
* profile is at a specific dpihw. Use first entry of table by default.
* @param sensor_type sensor id
* @param dpi hardware dpi for the scan
* @param flags to select between XPA, XPA+IR or regular scan from OPTICAL_FLAGS_*
* @return a pointer to a Sensor_Profile struct
*/
static Sensor_Profile *get_sensor_profile(int sensor_type, int dpi, int flags)
{
unsigned int i, count;
int idx;
Sensor_Profile *sp;
if(flags & OPTICAL_FLAG_USE_XPA)
{
sp=xpa_sensors;
count=sizeof(xpa_sensors)/sizeof(Sensor_Profile);
}
else
{
sp=sensors;
count=sizeof(sensors)/sizeof(Sensor_Profile);
}
i=0;
idx=-1;
while(i<count)
{
/* exact match */
if(sp[i].sensor_type==sensor_type && sp[i].dpi==dpi)
{
return &(sp[i]);
}
/* closest match */
if(sp[i].sensor_type==sensor_type)
{
if(idx<0)
{
idx=i;
}
else
{
if(sp[i].dpi>=dpi
&& sp[i].dpi<sp[idx].dpi)
{
idx=i;
}
}
}
i++;
}
/* default fallback */
if(idx<0)
{
DBG (DBG_warn,"%s: using default sensor profile\n",__func__);
idx=0;
}
return &(sp[idx]);
}
/** copy sensor specific settings */
static void
gl843_setup_sensor (Genesys_Device * dev, Genesys_Register_Set * regs, int dpi,int flags)
{
Genesys_Register_Set *r;
Sensor_Profile *sensor;
int i,dpihw;
DBGSTART;
dpihw=sanei_genesys_compute_dpihw(dev,dpi);
sensor=get_sensor_profile(dev->model->ccd_type, dpihw, flags);
for (i = 0x06; i < 0x0e; i++)
{
r = sanei_genesys_get_address (regs, 0x10 + i);
if (r)
r->value = sensor->regs_0x10_0x1d[i];
}
for (i = 0; i < 9; i++)
{
r = sanei_genesys_get_address (regs, 0x52 + i);
if (r)
r->value = sensor->regs_0x52_0x5e[i];
}
/* specific registers */
r = sanei_genesys_get_address (regs, 0x0c);
if (r)
{
r->value = sensor->reg0c;
}
r = sanei_genesys_get_address (regs, 0x70);
if (r)
{
r->value = sensor->reg70;
}
r = sanei_genesys_get_address (regs, 0x71);
if (r)
{
r->value = sensor->reg71;
}
r = sanei_genesys_get_address (regs, 0x7d);
if (r)
{
if (!(dev->model->flags & GENESYS_FLAG_FULL_HWDPI_MODE))
{
r->value = 0x90;
}
}
r = sanei_genesys_get_address (regs, 0x9e);
if (r)
{
r->value = sensor->reg9e;
}
/* undocumented register */
r = sanei_genesys_get_address (regs, 0xaa);
if (r)
{
r->value = sensor->regaa;
}
/* CKxMAP */
sanei_genesys_set_triple(regs,REG_CK1MAP,sensor->ck1map);
sanei_genesys_set_triple(regs,REG_CK3MAP,sensor->ck3map);
sanei_genesys_set_triple(regs,REG_CK4MAP,sensor->ck4map);
DBGCOMPLETED;
}
/* returns the max register bulk size */
static int
gl843_bulk_full_size (void)
{
return GENESYS_GL843_MAX_REGS;
}
/** @brief set all registers to default values .
* This function is called only once at the beginning and
* fills register startup values for registers reused across scans.
* Those that are rarely modified or not modified are written
* individually.
* @param dev device structure holding register set to initialize
*/
static void
gl843_init_registers (Genesys_Device * dev)
{
DBGSTART;
memset (dev->reg, 0, GENESYS_GL843_MAX_REGS * sizeof (Genesys_Register_Set));
/* default to KV-SS080 */
SETREG (0xa2, 0x0f);
SETREG (0x01, 0x00);
SETREG (0x02, 0x78);
SETREG (0x03, 0x1f);
SETREG (0x04, 0x10);
SETREG (0x05, 0x80);
SETREG (0x06, 0xd8); /* SCANMOD=110, PWRBIT and GAIN4 */
SETREG (0x08, 0x00);
SETREG (0x09, 0x00);
SETREG (0x0a, 0x00);
SETREG (0x0b, 0x6a);
SETREG (0x10, 0x00);
SETREG (0x11, 0x00);
SETREG (0x12, 0x00);
SETREG (0x13, 0x00);
SETREG (0x14, 0x00);
SETREG (0x15, 0x00);
SETREG (0x16, 0x33);
SETREG (0x17, 0x1c);
SETREG (0x18, 0x10);
SETREG (0x19, 0x2a);
SETREG (0x1a, 0x04);
SETREG (0x1b, 0x00);
SETREG (0x1c, 0x20);
SETREG (0x1d, 0x04);
SETREG (0x1e, 0x10);
SETREG (0x1f, 0x01);
SETREG (0x20, 0x10);
SETREG (0x21, 0x04);
SETREG (0x22, 0x01);
SETREG (0x23, 0x01);
SETREG (0x24, 0x04);
SETREG (0x25, 0x00);
SETREG (0x26, 0x00);
SETREG (0x27, 0x00);
SETREG (0x2c, 0x02);
SETREG (0x2d, 0x58);
SETREG (0x2e, 0x80);
SETREG (0x2f, 0x80);
SETREG (0x30, 0x00);
SETREG (0x31, 0x14);
SETREG (0x32, 0x27);
SETREG (0x33, 0xec);
SETREG (0x34, 0x24);
SETREG (0x35, 0x00);
SETREG (0x36, 0xff);
SETREG (0x37, 0xff);
SETREG (0x38, 0x55);
SETREG (0x39, 0xf0);
SETREG (0x3d, 0x00);
SETREG (0x3e, 0x00);
SETREG (0x3f, 0x01);
SETREG (0x52, 0x01);
SETREG (0x53, 0x04);
SETREG (0x54, 0x07);
SETREG (0x55, 0x0a);
SETREG (0x56, 0x0d);
SETREG (0x57, 0x10);
SETREG (0x58, 0x1b);
SETREG (0x59, 0x00);
SETREG (0x5a, 0x40);
SETREG (0x5e, 0x23);
SETREG (0x5f, 0x01);
SETREG (0x60, 0x00);
SETREG (0x61, 0x00);
SETREG (0x62, 0x00);
SETREG (0x63, 0x00);
SETREG (0x64, 0x00);
SETREG (0x65, 0x00);
SETREG (0x67, 0x7f);
SETREG (0x68, 0x7f);
SETREG (0x69, 0x01);
SETREG (0x6a, 0x04);
SETREG (0x6b, 0x30);
SETREG (0x70, 0x01);
SETREG (0x71, 0x03);
SETREG (0x72, 0x04);
SETREG (0x73, 0x05);
/* CKxMAP */
SETREG (0x74, 0x00);
SETREG (0x75, 0x00);
SETREG (0x76, 0x3c);
SETREG (0x77, 0x00);
SETREG (0x78, 0x00);
SETREG (0x79, 0x9f);
SETREG (0x7a, 0x00);
SETREG (0x7b, 0x00);
SETREG (0x7c, 0x55);
SETREG (0x7d, 0x00);
SETREG (0x7f, 0x00);
SETREG (0x80, 0x00);
if (strcmp (dev->model->name, "canon-canoscan-4400f") != 0)
{
SETREG (0x81, 0x00);
SETREG (0x82, 0x00);
SETREG (0x83, 0x00);
SETREG (0x84, 0x00);
SETREG (0x85, 0x00);
SETREG (0x86, 0x00);
}
SETREG (0x87, 0x00);
SETREG (0x9d, 0x04);
SETREG (0x9e, 0x00);
if (strcmp (dev->model->name, "canon-canoscan-8400f") != 0)
{
SETREG (0x0c, 0x00);
SETREG (0x94, 0xff);
SETREG (0xab, 0x50);
}
/* so many time burnt for this register ....*/
if (strcmp (dev->model->name, "canon-canoscan-4400f") != 0
&&strcmp (dev->model->name, "canon-canoscan-8400f") != 0)
{
SETREG (0xaa, 0x00);
}
/* G4050 values */
if ((strcmp (dev->model->name, "hewlett-packard-scanjet-g4050") == 0)
|| (strcmp (dev->model->name, "hewlett-packard-scanjet-4850c") == 0)
|| (strcmp (dev->model->name, "hewlett-packard-scanjet-g4010") == 0))
{
SETREG (0x03, 0x1d);
SETREG (0x05, 0x08);
SETREG (0x06, 0xd0); /* SCANMOD=110, PWRBIT and no GAIN4 */
SETREG (0x06, 0xd8); /* SCANMOD=110, PWRBIT and GAIN4 */
SETREG (0x0a, 0x18);
SETREG (0x0b, 0x69);
/* CIS exposure is used for XPA lamp movement */
SETREG (0x10, 0x2c);
SETREG (0x11, 0x09);
SETREG (0x12, 0x22);
SETREG (0x13, 0xb8);
SETREG (0x14, 0x10);
SETREG (0x15, 0xf0);
SETREG (0x6b, 0xf4);
SETREG (0x70, 0x00);
SETREG (0x71, 0x02);
SETREG (0x72, 0x00);
SETREG (0x73, 0x00);
SETREG (0x80, 0x50);
SETREG (0x9d, 0x08);
SETREG (0xab, 0x40);
/* XXX STEF XXX TODO move to set for scan */
SETREG (0x98, 0x03);
SETREG (0x99, 0x30);
SETREG (0x9a, 0x01);
SETREG (0x9b, 0x80);
SETREG (0xac, 0x00);
}
if (strcmp (dev->model->name, "canon-canoscan-4400f") == 0)
{
SETREG (0x06, 0xf0); /* SCANMOD=111, PWRBIT and no GAIN4 */
SETREG (0x0b, 0x69); /* 16M only */
SETREG (0x1e, 0x20);
SETREG (0x22, 0xc8);
SETREG (0x23, 0xc8);
SETREG (0x5e, 0x3f);
SETREG (0x5f, 0xf0);
SETREG (0x6b, 0x72);
SETREG (0x72, 0x01);
SETREG (0x73, 0x03);
SETREG (0x80, 0x0c);
SETREG (0x87, 0x02); /* MCLOCK -> CK4MAP */
SETREG (0x9d, 0x08); /* STEPTIM=2 */
SETREG (0xa2, 0x1f);
SETREG (0xab, 0x00);
sanei_genesys_set_double(dev->reg,REG_EXPR,0x9c40);
sanei_genesys_set_double(dev->reg,REG_EXPG,0x9c40);
sanei_genesys_set_double(dev->reg,REG_EXPB,0x9c40);
}
if (strcmp (dev->model->name, "canon-canoscan-8400f") == 0)
{
SETREG (0x03, 0x1c);
SETREG (0x06, 0xd0); /* SCANMOD=110, PWRBIT and no GAIN4 */
SETREG (0x0a, 0x10);
SETREG (0x22, 0x50);
SETREG (0x23, 0x50);
SETREG (0x5e, 0x85);
SETREG (0x6b, 0xb1);
SETREG (0x1e, 0xa0);
SETREG (0x72, 0x03);
SETREG (0x73, 0x04);
SETREG (0x7d, 0x20);
SETREG (0x80, 0x28);
SETREG (0x87, 0x02); /* MCLOCK -> CK4MAP */
SETREG (0x9d, 0x08); /* STEPTIM=2 */
}
/* fine tune upon device description */
dev->reg[reg_0x05].value &= ~REG05_DPIHW;
switch (dev->sensor.optical_res)
{
case 600:
dev->reg[reg_0x05].value |= REG05_DPIHW_600;
break;
case 1200:
dev->reg[reg_0x05].value |= REG05_DPIHW_1200;
break;
case 2400:
dev->reg[reg_0x05].value |= REG05_DPIHW_2400;
break;
case 4800:
dev->reg[reg_0x05].value |= REG05_DPIHW_4800;
break;
}
/* initalize calibration reg */
memcpy (dev->calib_reg, dev->reg, GENESYS_GL843_MAX_REGS * sizeof (Genesys_Register_Set));
DBGCOMPLETED;
}
/* Send slope table for motor movement
slope_table in machine byte order
*/
#ifndef UNIT_TESTING
static
#endif
SANE_Status
gl843_send_slope_table (Genesys_Device * dev, int table_nr,
uint16_t * slope_table, int steps)
{
SANE_Status status;
uint8_t *table;
int i;
char msg[10000];
DBG (DBG_proc, "%s (table_nr = %d, steps = %d)\n", __func__,
table_nr, steps);
table = (uint8_t *) malloc (steps * 2);
for (i = 0; i < steps; i++)
{
table[i * 2] = slope_table[i] & 0xff;
table[i * 2 + 1] = slope_table[i] >> 8;
}
if (DBG_LEVEL >= DBG_io)
{
sprintf (msg, "write slope %d (%d)=", table_nr, steps);
for (i = 0; i < steps; i++)
{
sprintf (msg+strlen(msg), "%d", slope_table[i]);
}
DBG (DBG_io, "%s: %s\n", __func__, msg);
}
/* slope table addresses are fixed : 0x4000, 0x4800, 0x5000, 0x5800, 0x6000 */
/* XXX STEF XXX USB 1.1 ? sanei_genesys_write_0x8c (dev, 0x0f, 0x14); */
status = write_data (dev, 0x4000 + 0x800 * table_nr, steps * 2, table);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"%s: write data failed writing slope table %d (%s)\n",
__func__, table_nr, sane_strstatus (status));
}
free (table);
DBGCOMPLETED;
return status;
}
/* Set values of analog frontend */
static SANE_Status
gl843_set_fe (Genesys_Device * dev, uint8_t set)
{
SANE_Status status;
uint8_t val;
int i;
DBG (DBG_proc, "gl843_set_fe (%s)\n",
set == AFE_INIT ? "init" : set == AFE_SET ? "set" : set ==
AFE_POWER_SAVE ? "powersave" : "huh?");
if (set == AFE_INIT)
{
DBG (DBG_proc, "gl843_set_fe(): setting DAC %u\n",
dev->model->dac_type);
sanei_genesys_init_fe (dev);
}
/* check analog frontend type */
RIE (sanei_genesys_read_register (dev, REG04, &val));
if ((val & REG04_FESET) != 0x00)
{
/* for now there is no support for AD fe */
DBG (DBG_proc, "gl843_set_fe(): unsupported frontend type %d\n",
dev->reg[reg_0x04].value & REG04_FESET);
return SANE_STATUS_UNSUPPORTED;
}
DBG (DBG_proc, "gl843_set_fe(): frontend reset complete\n");
for (i = 1; i <= 3; i++)
{
status = sanei_genesys_fe_write_data (dev, i, dev->frontend.reg[i]);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_set_fe: writing reg[%d] failed: %s\n", i,
sane_strstatus (status));
return status;
}
}
for (i = 0; i < 3; i++)
{
status =
sanei_genesys_fe_write_data (dev, 0x20 + i, dev->frontend.offset[i]);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_set_fe: writing offset[%d] failed: %s\n", i,
sane_strstatus (status));
return status;
}
}
if (dev->model->ccd_type == CCD_KVSS080)
{
for (i = 0; i < 3; i++)
{
status =
sanei_genesys_fe_write_data (dev, 0x24 + i,
dev->frontend.sign[i]);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_set_fe: writing sign[%d] failed: %s\n", i,
sane_strstatus (status));
return status;
}
}
}
for (i = 0; i < 3; i++)
{
status =
sanei_genesys_fe_write_data (dev, 0x28 + i, dev->frontend.gain[i]);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_set_fe: writing gain[%d] failed: %s\n", i,
sane_strstatus (status));
return status;
}
}
DBGCOMPLETED;
return SANE_STATUS_GOOD;
}
static SANE_Status
gl843_init_motor_regs_scan (Genesys_Device * dev,
Genesys_Register_Set * reg,
unsigned int exposure,
float scan_yres,
int scan_step_type,
unsigned int scan_lines,
unsigned int scan_dummy,
unsigned int feed_steps,
int scan_power_mode,
unsigned int flags)
{
SANE_Status status;
int use_fast_fed, coeff;
unsigned int lincnt;
uint16_t scan_table[1024];
uint16_t fast_table[1024];
int scan_steps,fast_steps, fast_step_type;
unsigned int feedl,factor,dist;
Genesys_Register_Set *r;
uint32_t z1, z2;
DBGSTART;
DBG (DBG_info, "gl843_init_motor_regs_scan : exposure=%d, "
"scan_yres=%g, scan_step_type=%d, scan_lines=%d, scan_dummy=%d, "
"feed_steps=%d, scan_power_mode=%d, flags=%x\n",
exposure, scan_yres, scan_step_type,
scan_lines, scan_dummy, feed_steps, scan_power_mode, flags);
/* get step multiplier */
factor = gl843_get_step_multiplier (reg);
use_fast_fed = 0;
if((scan_yres>=300 && feed_steps>900) || (flags & MOTOR_FLAG_FEED))
use_fast_fed=1;
lincnt=scan_lines;
sanei_genesys_set_triple(reg,REG_LINCNT,lincnt);
DBG (DBG_io, "%s: lincnt=%d\n", __func__, lincnt);
/* compute register 02 value */
r = sanei_genesys_get_address (reg, REG02);
r->value = 0x00;
r->value |= REG02_MTRPWR;
if (use_fast_fed)
r->value |= REG02_FASTFED;
else
r->value &= ~REG02_FASTFED;
/* in case of automatic go home, move until home sensor */
if (flags & MOTOR_FLAG_AUTO_GO_HOME)
r->value |= REG02_AGOHOME | REG02_NOTHOME;
/* disable backtracking */
if ((flags & MOTOR_FLAG_DISABLE_BUFFER_FULL_MOVE)
||(scan_yres>=2400)
||(scan_yres>=dev->sensor.optical_res))
r->value |= REG02_ACDCDIS;
/* scan and backtracking slope table */
sanei_genesys_slope_table(scan_table,
&scan_steps,
scan_yres,
exposure,
dev->motor.base_ydpi,
scan_step_type,
factor,
dev->model->motor_type,
gl843_motors);
RIE(gl843_send_slope_table (dev, SCAN_TABLE, scan_table, scan_steps*factor));
RIE(gl843_send_slope_table (dev, BACKTRACK_TABLE, scan_table, scan_steps*factor));
/* STEPNO */
r = sanei_genesys_get_address (reg, REG_STEPNO);
r->value = scan_steps;
/* FSHDEC */
r = sanei_genesys_get_address (reg, REG_FSHDEC);
r->value = scan_steps;
/* fast table */
fast_step_type=0;
if(scan_step_type<=fast_step_type)
{
fast_step_type=scan_step_type;
}
sanei_genesys_slope_table(fast_table,
&fast_steps,
sanei_genesys_get_lowest_ydpi(dev),
exposure,
dev->motor.base_ydpi,
fast_step_type,
factor,
dev->model->motor_type,
gl843_motors);
RIE(gl843_send_slope_table (dev, STOP_TABLE, fast_table, fast_steps*factor));
RIE(gl843_send_slope_table (dev, FAST_TABLE, fast_table, fast_steps*factor));
RIE(gl843_send_slope_table (dev, HOME_TABLE, fast_table, fast_steps*factor));
/* FASTNO */
r = sanei_genesys_get_address (reg, REG_FASTNO);
r->value = fast_steps;
/* FMOVNO */
r = sanei_genesys_get_address (reg, REG_FMOVNO);
r->value = fast_steps;
/* substract acceleration distance from feedl */
feedl=feed_steps;
feedl<<=scan_step_type;
dist = scan_steps;
if (use_fast_fed)
{
dist += fast_steps*2;
}
DBG (DBG_io2, "%s: acceleration distance=%d\n", __func__, dist);
/* get sure when don't insane value : XXX STEF XXX in this case we should
* fall back to single table move */
if(dist<feedl)
feedl -= dist;
else
feedl = 1;
sanei_genesys_set_triple(reg,REG_FEEDL,feedl);
DBG (DBG_io, "%s: feedl=%d\n", __func__, feedl);
/* doesn't seem to matter that much */
sanei_genesys_calculate_zmode2 (use_fast_fed,
exposure,
scan_table,
scan_steps,
feedl,
scan_steps,
&z1,
&z2);
if(scan_yres>600)
{
z1=0;
z2=0;
}
sanei_genesys_set_triple(reg,REG_Z1MOD,z1);
DBG (DBG_info, "gl843_init_motor_regs_scan: z1 = %d\n", z1);
sanei_genesys_set_triple(reg,REG_Z2MOD,z2);
DBG (DBG_info, "gl843_init_motor_regs_scan: z2 = %d\n", z2);
r = sanei_genesys_get_address (reg, REG1E);
r->value &= 0xf0; /* 0 dummy lines */
r->value |= scan_dummy; /* dummy lines */
r = sanei_genesys_get_address (reg, REG67);
r->value = 0x3f | (scan_step_type << REG67S_STEPSEL);
r = sanei_genesys_get_address (reg, REG68);
r->value = 0x3f | (scan_step_type << REG68S_FSTPSEL);
/* steps for STOP table */
r = sanei_genesys_get_address (reg, REG_FMOVDEC);
r->value = fast_steps;
/* Vref XXX STEF XXX : optical divider or step type ? */
r = sanei_genesys_get_address (reg, 0x80);
if (!(dev->model->flags & GENESYS_FLAG_FULL_HWDPI_MODE))
{
r->value = 0x50;
coeff=dev->sensor.optical_res/sanei_genesys_compute_dpihw(dev, scan_yres);
if (dev->model->motor_type == MOTOR_KVSS080)
{
if(coeff>=1)
{
r->value |= 0x05;
}
}
else {
switch(coeff)
{
case 4:
r->value |= 0x0a;
break;
case 2:
r->value |= 0x0f;
break;
case 1:
r->value |= 0x0f;
break;
}
}
}
DBGCOMPLETED;
return SANE_STATUS_GOOD;
}
/**@brief compute exposure to use
* compute the sensor exposure based on target resolution
*/
static int gl843_compute_exposure(Genesys_Device *dev, int xres, int flags)
{
Sensor_Profile *sensor;
sensor=get_sensor_profile(dev->model->ccd_type, xres, flags);
return sensor->exposure;
}
/** @brief setup optical related registers
* start and pixels are expressed in optical sensor resolution coordinate
* space.
* @param dev device to use
* @param reg registers to set up
* @param exposure exposure time to use
* @param used_res scanning resolution used, may differ from
* scan's one
* @param start logical start pixel coordinate
* @param pixels logical number of pixels to use
* @param channels number of color channles used (1 or 3)
* @param depth bit depth of the scan (1, 8 or 16 bits)
* @param half_ccd SANE_TRUE if timings are such that x coordiantes must be halved
* @param color_filter to choose the color channel used in gray scans
* @param flags to drive specific settings such no calibration, XPA use ...
* @return SANE_STATUS_GOOD if OK
*/
static SANE_Status
gl843_init_optical_regs_scan (Genesys_Device * dev,
Genesys_Register_Set * reg,
unsigned int exposure,
int used_res,
unsigned int start,
unsigned int pixels,
int channels,
int depth,
SANE_Bool half_ccd,
int color_filter,
int flags)
{
unsigned int words_per_line;
unsigned int startx, endx, used_pixels;
unsigned int dpiset, dpihw, factor;
unsigned int bytes;
unsigned int tgtime; /**> exposure time multiplier */
unsigned int cksel; /**> clock per system pixel time in capturing image */
Genesys_Register_Set *r;
SANE_Status status;
DBG (DBG_proc, "gl843_init_optical_regs_scan : exposure=%d, "
"used_res=%d, start=%d, pixels=%d, channels=%d, depth=%d, "
"half_ccd=%d, flags=%x\n",
exposure,
used_res, start, pixels, channels, depth, half_ccd, flags);
/* tgtime */
tgtime=1;
if (dev->model->ccd_type == CCD_G4050 && used_res>2400)
{
tgtime=2;
}
DBG (DBG_io2, "%s: tgtime=%d\n", __func__, tgtime);
/* to manage high resolution device while keeping good
* low resolution scanning speed, we make hardware dpi vary */
dpihw=sanei_genesys_compute_dpihw(dev, used_res);
factor=dev->sensor.optical_res/dpihw;
DBG (DBG_io2, "%s: dpihw=%d (factor=%d)\n", __func__, dpihw, factor);
/* sensor parameters */
gl843_setup_sensor (dev, reg, dpihw, flags);
/* resolution is divided according to CKSEL which is known once sensor is set up */
r = sanei_genesys_get_address (reg, REG18);
cksel= (r->value & REG18_CKSEL)+1;
DBG (DBG_io2, "%s: cksel=%d\n", __func__, cksel);
dpiset = used_res * cksel;
/* start and end coordinate in optical dpi coordinates */
startx = (start + dev->sensor.dummy_pixel * tgtime)/cksel;
used_pixels=pixels/cksel;
endx = startx + used_pixels;
/* pixel coordinate factor correction when used dpihw is not maximal one */
startx/=factor;
endx/=factor;
used_pixels=endx-startx;
/* in case of stagger we have to start at an odd coordinate */
if ((flags & OPTICAL_FLAG_STAGGER)
&&((startx & 1)==0))
{
startx++;
endx++;
}
status = gl843_set_fe (dev, AFE_SET);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error, "%s: failed to set frontend: %s\n", __func__,
sane_strstatus (status));
return status;
}
/* enable shading */
r = sanei_genesys_get_address (reg, REG01);
r->value &= ~REG01_SCAN;
if ((flags & OPTICAL_FLAG_DISABLE_SHADING) || (dev->model->flags & GENESYS_FLAG_NO_CALIBRATION))
{
r->value &= ~REG01_DVDSET;
}
else
{
r->value |= REG01_DVDSET;
}
if(dpihw>600)
{
r->value |= REG01_SHDAREA;
}
else
{
r->value &= ~REG01_SHDAREA;
}
r = sanei_genesys_get_address (reg, REG03);
r->value &= ~REG03_AVEENB;
if (flags & OPTICAL_FLAG_DISABLE_LAMP)
r->value &= ~REG03_LAMPPWR;
else
r->value |= REG03_LAMPPWR;
/* select XPA */
r->value &= ~REG03_XPASEL;
if (flags & OPTICAL_FLAG_USE_XPA)
{
r->value |= REG03_XPASEL;
}
/* BW threshold */
r = sanei_genesys_get_address (reg, REG2E);
r->value = dev->settings.threshold;
r = sanei_genesys_get_address (reg, REG2F);
r->value = dev->settings.threshold;
/* monochrome / color scan */
r = sanei_genesys_get_address (reg, REG04);
switch (depth)
{
case 1:
r->value &= ~REG04_BITSET;
r->value |= REG04_LINEART;
break;
case 8:
r->value &= ~(REG04_LINEART | REG04_BITSET);
break;
case 16:
r->value &= ~REG04_LINEART;
r->value |= REG04_BITSET;
break;
}
r->value &= ~(REG04_FILTER | REG04_AFEMOD);
if (channels == 1)
{
switch (color_filter)
{
case 0:
r->value |= 0x14; /* red filter */
break;
case 2:
r->value |= 0x1c; /* blue filter */
break;
default:
r->value |= 0x18; /* green filter */
break;
}
}
else
r->value |= 0x10; /* mono */
/* register 05 */
r = sanei_genesys_get_address (reg, REG05);
/* set up dpihw */
r->value &= ~REG05_DPIHW;
switch(dpihw)
{
case 600:
r->value |= REG05_DPIHW_600;
break;
case 1200:
r->value |= REG05_DPIHW_1200;
break;
case 2400:
r->value |= REG05_DPIHW_2400;
break;
case 4800:
r->value |= REG05_DPIHW_4800;
break;
}
/* enable gamma tables */
if (flags & OPTICAL_FLAG_DISABLE_GAMMA)
r->value &= ~REG05_GMMENB;
else
r->value |= REG05_GMMENB;
if(half_ccd)
{
sanei_genesys_set_double(reg,REG_DPISET,dpiset*4);
DBG (DBG_io2, "%s: dpiset used=%d\n", __func__, dpiset*4);
}
else
{
sanei_genesys_set_double(reg,REG_DPISET,dpiset);
DBG (DBG_io2, "%s: dpiset used=%d\n", __func__, dpiset);
}
sanei_genesys_set_double(reg,REG_STRPIXEL,startx/tgtime);
sanei_genesys_set_double(reg,REG_ENDPIXEL,endx/tgtime);
/* words(16bit) before gamma, conversion to 8 bit or lineart */
words_per_line = (used_pixels * dpiset) / dpihw;
bytes = depth / 8;
if (depth == 1)
{
words_per_line = (words_per_line >> 3) + ((words_per_line & 7) ? 1 : 0);
}
else
{
words_per_line *= bytes;
}
dev->wpl = words_per_line;
dev->bpl = words_per_line;
DBG (DBG_io2, "%s: used_pixels=%d\n", __func__, used_pixels);
DBG (DBG_io2, "%s: pixels =%d\n", __func__, pixels);
DBG (DBG_io2, "%s: depth =%d\n", __func__, depth);
DBG (DBG_io2, "%s: dev->bpl =%lu\n", __func__, (unsigned long) dev->bpl);
DBG (DBG_io2, "%s: dev->len =%lu\n", __func__, (unsigned long)dev->len);
DBG (DBG_io2, "%s: dev->dist =%lu\n", __func__, (unsigned long)dev->dist);
words_per_line *= channels;
/* MAXWD is expressed in 2 words unit */
/* nousedspace = (mem_bank_range * 1024 / 256 -1 ) * 4; */
sanei_genesys_set_triple(reg,REG_MAXWD,(words_per_line)>>1);
DBG (DBG_io2, "%s: words_per_line used=%d\n", __func__, words_per_line);
sanei_genesys_set_double(reg,REG_LPERIOD,exposure/tgtime);
DBG (DBG_io2, "%s: exposure used=%d\n", __func__, exposure/tgtime);
r = sanei_genesys_get_address (reg, REG_DUMMY);
r->value = dev->sensor.dummy_pixel * tgtime;
DBGCOMPLETED;
return SANE_STATUS_GOOD;
}
/* set up registers for an actual scan
*
* this function sets up the scanner to scan in normal or single line mode
*/
#ifndef UNIT_TESTING
static
#endif
SANE_Status
gl843_init_scan_regs (Genesys_Device * dev,
Genesys_Register_Set * reg,
float xres, /*dpi */
float yres, /*dpi */
float startx, /*optical_res, from dummy_pixel+1 */
float starty, /*base_ydpi, from home! */
float pixels,
float lines,
unsigned int depth,
unsigned int channels,
int scan_mode,
int color_filter,
unsigned int flags)
{
int used_res;
int start, used_pixels;
int bytes_per_line;
int move;
unsigned int lincnt; /**> line count to scan */
unsigned int oflags, mflags; /**> optical and motor flags */
int exposure;
int stagger;
int slope_dpi = 0;
int dummy = 0;
int scan_step_type = 1;
int scan_power_mode = 0;
int max_shift;
size_t requested_buffer_size, read_buffer_size;
SANE_Bool half_ccd; /* false: full CCD res is used, true, half max CCD res is used */
int optical_res;
SANE_Status status;
DBG (DBG_info,
"gl843_init_scan_regs settings:\n"
"Resolution : %gDPI/%gDPI\n"
"Lines : %g\n"
"PPL : %g\n"
"Startpos : %g/%g\n"
"Depth/Channels: %u/%u\n"
"Flags : %x\n\n",
xres, yres, lines, pixels, startx, starty, depth, channels, flags);
/* we have 2 domains for ccd: xres below or above half ccd max dpi */
if (dev->sensor.optical_res < 4 * xres ||
!(dev->model->flags & GENESYS_FLAG_HALF_CCD_MODE))
{
half_ccd = SANE_FALSE;
}
else
{
half_ccd = SANE_TRUE;
}
/* optical_res */
optical_res = dev->sensor.optical_res;
if (half_ccd)
optical_res /= 4;
/* stagger starting at 2400, and not applied for calibration */
stagger = 0;
if ( (yres>1200)
&& ((flags & SCAN_FLAG_IGNORE_LINE_DISTANCE)==0)
&& (dev->model->flags & GENESYS_FLAG_STAGGERED_LINE))
{
stagger = (4 * yres) / dev->motor.base_ydpi;
}
DBG (DBG_info, "%s : stagger=%d lines\n", __func__, stagger);
/* we enable true gray for cis scanners only, and just when doing
* scan since color calibration is OK for this mode
*/
oflags = 0;
if (flags & SCAN_FLAG_DISABLE_SHADING)
oflags |= OPTICAL_FLAG_DISABLE_SHADING;
if (flags & SCAN_FLAG_DISABLE_GAMMA)
oflags |= OPTICAL_FLAG_DISABLE_GAMMA;
if (flags & SCAN_FLAG_DISABLE_LAMP)
oflags |= OPTICAL_FLAG_DISABLE_LAMP;
if (flags & SCAN_FLAG_CALIBRATION)
oflags |= OPTICAL_FLAG_DISABLE_DOUBLE;
if(stagger)
oflags |= OPTICAL_FLAG_STAGGER;
if (flags & SCAN_FLAG_USE_XPA)
oflags |= OPTICAL_FLAG_USE_XPA;
/** @brief compute used resolution */
if (flags & SCAN_FLAG_USE_OPTICAL_RES)
{
used_res = optical_res;
}
else
{
/* resolution is choosen from a fixed list and can be used directly
* unless we have ydpi higher than sensor's maximum one */
if(xres>optical_res)
used_res=optical_res;
else
used_res = xres;
}
/* compute scan parameters values */
/* pixels are allways given at full optical resolution */
/* use detected left margin and fixed value */
/* start */
start = startx;
/* compute correct pixels number */
used_pixels = (pixels * optical_res) / xres;
DBG (DBG_info, "%s: used_pixels=%d\n", __func__, used_pixels);
/* round up pixels number if needed */
if (used_pixels * xres < pixels * optical_res)
used_pixels++;
/* we want even number of pixels here */
if(used_pixels & 1)
used_pixels++;
dummy = 0;
/* dummy = 1; XXX STEF XXX */
/* slope_dpi */
/* cis color scan is effectively a gray scan with 3 gray lines per color line and a FILTER of 0 */
if (dev->model->is_cis)
slope_dpi = yres * channels;
else
slope_dpi = yres;
slope_dpi = slope_dpi * (1 + dummy);
/* scan_step_type */
if(flags & SCAN_FLAG_FEEDING)
{
exposure=gl843_compute_exposure (dev, sanei_genesys_get_lowest_ydpi(dev), oflags);
scan_step_type=sanei_genesys_compute_step_type (gl843_motors, dev->model->motor_type, exposure);
}
else
{
exposure = gl843_compute_exposure (dev, used_res, oflags);
scan_step_type = sanei_genesys_compute_step_type(gl843_motors, dev->model->motor_type, exposure);
}
DBG (DBG_info, "%s : exposure=%d pixels\n", __func__, exposure);
DBG (DBG_info, "%s : scan_step_type=%d\n", __func__, scan_step_type);
/*** optical parameters ***/
/* in case of dynamic lineart, we use an internal 8 bit gray scan
* to generate 1 lineart data */
if ((flags & SCAN_FLAG_DYNAMIC_LINEART) && (scan_mode == SCAN_MODE_LINEART))
{
depth = 8;
}
/* no 16 bit gamma for this ASIC */
if (depth == 16)
{
flags |= SCAN_FLAG_DISABLE_GAMMA;
oflags |= OPTICAL_FLAG_DISABLE_GAMMA;
}
/* now _LOGICAL_ optical values used are known, setup registers */
status = gl843_init_optical_regs_scan (dev,
reg,
exposure,
used_res,
start,
used_pixels,
channels,
depth,
half_ccd,
color_filter,
oflags);
if (status != SANE_STATUS_GOOD)
return status;
/*** motor parameters ***/
/* it seems base_dpi of the G4050 motor is changed above 600 dpi*/
if (dev->model->motor_type == MOTOR_G4050 && yres>600)
{
dev->ld_shift_r = (dev->model->ld_shift_r*3800)/dev->motor.base_ydpi;
dev->ld_shift_g = (dev->model->ld_shift_g*3800)/dev->motor.base_ydpi;
dev->ld_shift_b = (dev->model->ld_shift_b*3800)/dev->motor.base_ydpi;
}
else
{
dev->ld_shift_r = dev->model->ld_shift_r;
dev->ld_shift_g = dev->model->ld_shift_g;
dev->ld_shift_b = dev->model->ld_shift_b;
}
/* max_shift */
/* scanned area must be enlarged by max color shift needed */
max_shift=sanei_genesys_compute_max_shift(dev,channels,yres,flags);
/* lines to scan */
lincnt = lines + max_shift + stagger;
/* add tl_y to base movement */
move = starty;
DBG (DBG_info, "gl843_init_scan_regs: move=%d steps\n", move);
mflags=0;
if(flags & SCAN_FLAG_DISABLE_BUFFER_FULL_MOVE)
mflags|=MOTOR_FLAG_DISABLE_BUFFER_FULL_MOVE;
if(flags & SCAN_FLAG_FEEDING)
mflags|=MOTOR_FLAG_FEED;
if (flags & SCAN_FLAG_USE_XPA)
mflags |= MOTOR_FLAG_USE_XPA;
status = gl843_init_motor_regs_scan (dev,
reg,
exposure,
slope_dpi,
scan_step_type,
dev->model->is_cis ? lincnt * channels : lincnt,
dummy,
move,
scan_power_mode,
mflags);
if (status != SANE_STATUS_GOOD)
return status;
/*** prepares data reordering ***/
/* words_per_line */
bytes_per_line = (used_pixels * used_res) / optical_res;
bytes_per_line = (bytes_per_line * channels * depth) / 8;
/* since we don't have sheetfed scanners to handle,
* use huge read buffer */
/* TODO find the best size according to settings */
requested_buffer_size = 16 * bytes_per_line;
read_buffer_size =
2 * requested_buffer_size +
((max_shift + stagger) * used_pixels * channels * depth) / 8;
RIE (sanei_genesys_buffer_free (&(dev->read_buffer)));
RIE (sanei_genesys_buffer_alloc (&(dev->read_buffer), read_buffer_size));
RIE (sanei_genesys_buffer_free (&(dev->lines_buffer)));
RIE (sanei_genesys_buffer_alloc (&(dev->lines_buffer), read_buffer_size));
RIE (sanei_genesys_buffer_free (&(dev->shrink_buffer)));
RIE (sanei_genesys_buffer_alloc (&(dev->shrink_buffer),
requested_buffer_size));
RIE (sanei_genesys_buffer_free (&(dev->out_buffer)));
RIE (sanei_genesys_buffer_alloc (&(dev->out_buffer),
(8 * dev->settings.pixels * channels *
depth) / 8));
dev->read_bytes_left = bytes_per_line * lincnt;
DBG (DBG_info,
"gl843_init_scan_regs: physical bytes to read = %lu\n",
(u_long) dev->read_bytes_left);
dev->read_active = SANE_TRUE;
dev->current_setup.pixels = (used_pixels * used_res) / optical_res;
DBG (DBG_info, "%s: current_setup.pixels=%d\n", __func__, dev->current_setup.pixels);
dev->current_setup.lines = lincnt;
dev->current_setup.depth = depth;
dev->current_setup.channels = channels;
dev->current_setup.exposure_time = exposure;
dev->current_setup.xres = used_res;
dev->current_setup.yres = yres;
dev->current_setup.half_ccd = half_ccd;
dev->current_setup.stagger = stagger;
dev->current_setup.max_shift = max_shift + stagger;
dev->total_bytes_read = 0;
if (depth == 1)
dev->total_bytes_to_read =
((dev->settings.pixels * dev->settings.lines) / 8 +
(((dev->settings.pixels * dev->settings.lines) % 8) ? 1 : 0)) *
channels;
else
dev->total_bytes_to_read =
dev->settings.pixels * dev->settings.lines * channels * (depth / 8);
DBG (DBG_info, "gl843_init_scan_regs: total bytes to send = %lu\n",
(u_long) dev->total_bytes_to_read);
DBG (DBG_proc, "gl843_init_scan_regs: completed\n");
return SANE_STATUS_GOOD;
}
static SANE_Status
gl843_calculate_current_setup (Genesys_Device * dev)
{
int channels;
int depth;
int start;
float xres; /*dpi */
float yres; /*dpi */
float startx; /*optical_res, from dummy_pixel+1 */
float pixels;
float lines;
int used_res;
int used_pixels;
unsigned int lincnt;
int exposure;
int stagger;
int max_shift;
SANE_Bool half_ccd; /* false: full CCD res is used, true, half max CCD res is used */
int optical_res;
int oflags;
DBG (DBG_info,
"gl843_calculate_current_setup settings:\n"
"Resolution: %ux%uDPI\n"
"Lines : %u\n"
"PPL : %u\n"
"Startpos : %.3f/%.3f\n"
"Scan mode : %d\n\n",
dev->settings.xres,
dev->settings.yres, dev->settings.lines, dev->settings.pixels,
dev->settings.tl_x, dev->settings.tl_y, dev->settings.scan_mode);
/* channels */
if (dev->settings.scan_mode == SCAN_MODE_COLOR) /* single pass color */
channels = 3;
else
channels = 1;
/* depth */
depth = dev->settings.depth;
if (dev->settings.scan_mode == SCAN_MODE_LINEART)
depth = 1;
/* start */
start = SANE_UNFIX (dev->model->x_offset);
start += dev->settings.tl_x;
start = (start * dev->sensor.optical_res) / MM_PER_INCH;
/* optical flags */
oflags=0;
if(dev->settings.scan_method==SCAN_METHOD_TRANSPARENCY)
{
oflags=OPTICAL_FLAG_USE_XPA;
}
xres = dev->settings.xres;
yres = dev->settings.yres;
startx = start;
pixels = dev->settings.pixels;
lines = dev->settings.lines;
DBG (DBG_info,
"gl843_calculate_current_setup settings:\n"
"Resolution : %gDPI/%gDPI\n"
"Lines : %g\n"
"PPL : %g\n"
"Startpos : %g\n"
"Depth/Channels: %u/%u\n\n",
xres, yres, lines, pixels, startx, depth, channels);
/* half_ccd */
/* we have 2 domains for ccd: xres below or above half ccd max dpi */
if ((dev->sensor.optical_res < 4 * xres) ||
!(dev->model->flags & GENESYS_FLAG_HALF_CCD_MODE))
{
half_ccd = SANE_FALSE;
}
else
{
half_ccd = SANE_TRUE;
}
/* optical_res */
optical_res = dev->sensor.optical_res;
if (half_ccd)
optical_res /= 4;
/* stagger */
if ((!half_ccd) && (dev->model->flags & GENESYS_FLAG_STAGGERED_LINE))
stagger = (4 * yres) / dev->motor.base_ydpi;
else
stagger = 0;
DBG (DBG_info, "%s: stagger=%d lines\n", __func__, stagger);
if(xres<=optical_res)
used_res = xres;
else
used_res=optical_res;
/* compute scan parameters values */
/* pixels are allways given at half or full CCD optical resolution */
/* use detected left margin and fixed value */
/* compute correct pixels number */
used_pixels = (pixels * optical_res) / xres;
DBG (DBG_info, "%s: used_pixels=%d\n", __func__, used_pixels);
/* exposure */
exposure = gl843_compute_exposure (dev, used_res, oflags);
DBG (DBG_info, "%s : exposure=%d pixels\n", __func__, exposure);
/* it seems base_dpi of the G4050 motor is changed above 600 dpi*/
if (dev->model->motor_type == MOTOR_G4050 && yres>600)
{
dev->ld_shift_r = (dev->model->ld_shift_r*3800)/dev->motor.base_ydpi;
dev->ld_shift_g = (dev->model->ld_shift_g*3800)/dev->motor.base_ydpi;
dev->ld_shift_b = (dev->model->ld_shift_b*3800)/dev->motor.base_ydpi;
}
else
{
dev->ld_shift_r = dev->model->ld_shift_r;
dev->ld_shift_g = dev->model->ld_shift_g;
dev->ld_shift_b = dev->model->ld_shift_b;
}
/* scanned area must be enlarged by max color shift needed */
max_shift=sanei_genesys_compute_max_shift(dev,channels,yres,0);
/* lincnt */
lincnt = lines + max_shift + stagger;
dev->current_setup.pixels = (used_pixels * used_res) / optical_res;
DBG (DBG_info, "%s: current_setup.pixels=%d\n", __func__, dev->current_setup.pixels);
dev->current_setup.lines = lincnt;
dev->current_setup.depth = depth;
dev->current_setup.channels = channels;
dev->current_setup.exposure_time = exposure;
dev->current_setup.xres = used_res;
dev->current_setup.yres = yres;
dev->current_setup.half_ccd = half_ccd;
dev->current_setup.stagger = stagger;
dev->current_setup.max_shift = max_shift + stagger;
DBG (DBG_proc, "gl843_calculate_current_setup: completed\n");
return SANE_STATUS_GOOD;
}
static void
gl843_set_motor_power (Genesys_Register_Set * regs, SANE_Bool set)
{
DBG (DBG_proc, "gl843_set_motor_power\n");
if (set)
{
sanei_genesys_set_reg_from_set (regs, REG02,
sanei_genesys_read_reg_from_set (regs,
REG02)
| REG02_MTRPWR);
}
else
{
sanei_genesys_set_reg_from_set (regs, REG02,
sanei_genesys_read_reg_from_set (regs,
REG02)
& ~REG02_MTRPWR);
}
}
static void
gl843_set_lamp_power (Genesys_Device * dev,
Genesys_Register_Set * regs, SANE_Bool set)
{
Genesys_Register_Set *r;
int i;
uint8_t val;
val = sanei_genesys_read_reg_from_set (regs, REG03);
if (set)
{
val |= REG03_LAMPPWR;
sanei_genesys_set_reg_from_set (regs, REG03, val);
for (i = 0; i < 6; i++)
{
r = sanei_genesys_get_address (regs, 0x10 + i);
r->value = dev->sensor.regs_0x10_0x1d[i];
}
}
else
{
val &= ~REG03_LAMPPWR;
sanei_genesys_set_reg_from_set (regs, REG03, val);
for (i = 0; i < 6; i++)
{
r = sanei_genesys_get_address (regs, 0x10 + i);
r->value = 0x00;
}
}
}
/**
* for fast power saving methods only, like disabling certain amplifiers
* @param dev device to use
* @param enable true to set inot powersaving
* */
static SANE_Status
gl843_save_power (Genesys_Device * dev, SANE_Bool enable)
{
uint8_t val;
SANE_Status status;
DBG (DBG_proc, "gl843_save_power: enable = %d\n", enable);
if (dev == NULL)
return SANE_STATUS_INVAL;
/* switch KV-SS080 lamp off */
if (dev->model->gpo_type == GPO_KVSS080)
{
RIE(sanei_genesys_read_register (dev, REG6C, &val));
if(enable)
val &= 0xef;
else
val |= 0x10;
RIE(sanei_genesys_write_register(dev,REG6C,val));
}
DBGCOMPLETED;
return SANE_STATUS_GOOD;
}
static SANE_Status
gl843_set_powersaving (Genesys_Device * dev, int delay /* in minutes */ )
{
SANE_Status status = SANE_STATUS_GOOD;
DBG (DBG_proc, "gl843_set_powersaving (delay = %d)\n", delay);
if (dev == NULL)
return SANE_STATUS_INVAL;
DBGCOMPLETED;
return status;
}
#ifndef UNIT_TESTING
static
#endif
SANE_Status
gl843_start_action (Genesys_Device * dev)
{
return sanei_genesys_write_register (dev, 0x0f, 0x01);
}
static SANE_Status
gl843_stop_action (Genesys_Device * dev)
{
SANE_Status status;
uint8_t val40, val;
unsigned int loop;
DBG (DBG_proc, "%s\n", __func__);
status = sanei_genesys_get_status (dev, &val);
if (DBG_LEVEL >= DBG_io)
{
sanei_genesys_print_status (val);
}
val40 = 0;
status = sanei_genesys_read_register (dev, REG40, &val40);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"%s: failed to read home sensor: %s\n", __func__,
sane_strstatus (status));
DBG (DBG_proc, "%s: completed\n", __func__);
return status;
}
/* only stop action if needed */
if (!(val40 & REG40_DATAENB) && !(val40 & REG40_MOTMFLG))
{
DBG (DBG_info, "%s: already stopped\n", __func__);
DBG (DBG_proc, "%s: completed\n", __func__);
return SANE_STATUS_GOOD;
}
/* ends scan 646 */
val = sanei_genesys_read_reg_from_set (dev->reg, REG01);
val &= ~REG01_SCAN;
sanei_genesys_set_reg_from_set (dev->reg, REG01, val);
status = sanei_genesys_write_register (dev, REG01, val);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error, "%s: failed to write register 01: %s\n", __func__,
sane_strstatus (status));
return status;
}
usleep (100 * 1000);
loop = 10;
while (loop > 0)
{
status = sanei_genesys_get_status (dev, &val);
if (DBG_LEVEL >= DBG_io)
{
sanei_genesys_print_status (val);
}
val40 = 0;
status = sanei_genesys_read_register (dev, 0x40, &val40);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"%s: failed to read home sensor: %s\n", __func__,
sane_strstatus (status));
DBGCOMPLETED;
return status;
}
/* if scanner is in command mode, we are done */
if (!(val40 & REG40_DATAENB) && !(val40 & REG40_MOTMFLG)
&& !(val & REG41_MOTORENB))
{
DBGCOMPLETED;
return SANE_STATUS_GOOD;
}
usleep (100 * 1000);
loop--;
}
DBGCOMPLETED;
return SANE_STATUS_IO_ERROR;
}
static SANE_Status
gl843_get_paper_sensor (Genesys_Device * dev, SANE_Bool * paper_loaded)
{
SANE_Status status;
uint8_t val;
status = sanei_genesys_read_register (dev, REG6D, &val);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_get_paper_sensor: failed to read gpio: %s\n",
sane_strstatus (status));
return status;
}
*paper_loaded = (val & 0x1) == 0;
return SANE_STATUS_GOOD;
return SANE_STATUS_INVAL;
}
static SANE_Status
gl843_eject_document (Genesys_Device * dev)
{
DBG (DBG_proc, "%s: not implemented \n", __func__);
if (dev == NULL)
return SANE_STATUS_INVAL;
return SANE_STATUS_GOOD;
}
static SANE_Status
gl843_load_document (Genesys_Device * dev)
{
DBG (DBG_proc, "%s: not implemented \n", __func__);
if (dev == NULL)
return SANE_STATUS_INVAL;
return SANE_STATUS_GOOD;
}
/**
* detects end of document and adjust current scan
* to take it into account
* used by sheetfed scanners
*/
static SANE_Status
gl843_detect_document_end (Genesys_Device * dev)
{
SANE_Status status = SANE_STATUS_GOOD;
SANE_Bool paper_loaded;
unsigned int scancnt = 0;
int flines, channels, depth, bytes_remain, sublines,
bytes_to_flush, lines, sub_bytes, tmp, read_bytes_left;
DBG (DBG_proc, "%s: begin\n", __func__);
RIE (gl843_get_paper_sensor (dev, &paper_loaded));
/* sheetfed scanner uses home sensor as paper present */
if ((dev->document == SANE_TRUE) && !paper_loaded)
{
DBG (DBG_info, "%s: no more document\n", __func__);
dev->document = SANE_FALSE;
channels = dev->current_setup.channels;
depth = dev->current_setup.depth;
read_bytes_left = (int) dev->read_bytes_left;
DBG (DBG_io, "gl843_detect_document_end: read_bytes_left=%d\n",
read_bytes_left);
/* get lines read */
status = sanei_genesys_read_scancnt (dev, &scancnt);
if (status != SANE_STATUS_GOOD)
{
flines = 0;
}
else
{
/* compute number of line read */
tmp = (int) dev->total_bytes_read;
if (depth == 1 || dev->settings.scan_mode == SCAN_MODE_LINEART)
flines = tmp * 8 / dev->settings.pixels / channels;
else
flines = tmp / (depth / 8) / dev->settings.pixels / channels;
/* number of scanned lines, but no read yet */
flines = scancnt - flines;
DBG (DBG_io,
"gl843_detect_document_end: %d scanned but not read lines\n",
flines);
}
/* adjust number of bytes to read
* we need to read the final bytes which are word per line * number of last lines
* to have doc leaving feeder */
lines =
(SANE_UNFIX (dev->model->post_scan) * dev->current_setup.yres) /
MM_PER_INCH + flines;
DBG (DBG_io, "gl843_detect_document_end: adding %d line to flush\n",
lines);
/* number of bytes to read from scanner to get document out of it after
* end of document dectected by hardware sensor */
bytes_to_flush = lines * dev->wpl;
/* if we are already close to end of scan, flushing isn't needed */
if (bytes_to_flush < read_bytes_left)
{
/* we take all these step to work around an overflow on some plateforms */
tmp = (int) dev->total_bytes_read;
DBG (DBG_io, "gl843_detect_document_end: tmp=%d\n", tmp);
bytes_remain = (int) dev->total_bytes_to_read;
DBG (DBG_io, "gl843_detect_document_end: bytes_remain=%d\n",
bytes_remain);
bytes_remain = bytes_remain - tmp;
DBG (DBG_io, "gl843_detect_document_end: bytes_remain=%d\n",
bytes_remain);
/* remaining lines to read by frontend for the current scan */
if (depth == 1 || dev->settings.scan_mode == SCAN_MODE_LINEART)
{
flines = bytes_remain * 8 / dev->settings.pixels / channels;
}
else
flines = bytes_remain / (depth / 8)
/ dev->settings.pixels / channels;
DBG (DBG_io, "gl843_detect_document_end: flines=%d\n", flines);
if (flines > lines)
{
/* change the value controlling communication with the frontend :
* total bytes to read is current value plus the number of remaining lines
* multiplied by bytes per line */
sublines = flines - lines;
if (depth == 1 || dev->settings.scan_mode == SCAN_MODE_LINEART)
sub_bytes =
((dev->settings.pixels * sublines) / 8 +
(((dev->settings.pixels * sublines) % 8) ? 1 : 0)) *
channels;
else
sub_bytes =
dev->settings.pixels * sublines * channels * (depth / 8);
dev->total_bytes_to_read -= sub_bytes;
/* then adjust the physical bytes to read */
if (read_bytes_left > sub_bytes)
{
dev->read_bytes_left -= sub_bytes;
}
else
{
dev->total_bytes_to_read = dev->total_bytes_read;
dev->read_bytes_left = 0;
}
DBG (DBG_io, "gl843_detect_document_end: sublines=%d\n",
sublines);
DBG (DBG_io, "gl843_detect_document_end: subbytes=%d\n",
sub_bytes);
DBG (DBG_io,
"gl843_detect_document_end: total_bytes_to_read=%lu\n",
(unsigned long) dev->total_bytes_to_read);
DBG (DBG_io,
"gl843_detect_document_end: read_bytes_left=%d\n",
read_bytes_left);
}
}
else
{
DBG (DBG_io, "gl843_detect_document_end: no flushing needed\n");
}
}
DBG (DBG_proc, "%s: finished\n", __func__);
return SANE_STATUS_GOOD;
}
/** @brief disable XPA slider motor
* toggle gpios to switch disble XPA slider motor
* @param dev device to set up
*/
#ifndef UNIT_TESTING
static
#endif
SANE_Status gl843_xpa_motor_off(Genesys_Device *dev)
{
uint8_t val;
SANE_Status status=SANE_STATUS_GOOD;
DBGSTART;
/* unset GPOADF */
RIE (sanei_genesys_read_register (dev, REG6B, &val));
val &= ~REG6B_GPOADF;
RIE (sanei_genesys_write_register (dev, REG6B, val));
RIE (sanei_genesys_read_register (dev, REGA8, &val));
val |= REGA8_GPO27;
RIE (sanei_genesys_write_register (dev, REGA8, val));
RIE (sanei_genesys_read_register (dev, REGA9, &val));
val &= ~REGA9_GPO31;
RIE (sanei_genesys_write_register (dev, REGA9, val));
DBGCOMPLETED;
return status;
}
/** @brief enable XPA slider motor
* toggle gpios to switch enable XPA slider motor
* @param dev device to set up
*/
#ifndef UNIT_TESTING
static
#endif
SANE_Status gl843_xpa_motor_on(Genesys_Device *dev)
{
uint8_t val;
SANE_Status status=SANE_STATUS_GOOD;
DBGSTART;
/* set MULTFILM et GPOADF */
RIE (sanei_genesys_read_register (dev, REG6B, &val));
val |=REG6B_MULTFILM|REG6B_GPOADF;
RIE (sanei_genesys_write_register (dev, REG6B, val));
RIE (sanei_genesys_read_register (dev, REG6C, &val));
val &= ~REG6C_GPIO15;
RIE (sanei_genesys_write_register (dev, REG6C, val));
/* Motor power ? No move at all without this one */
RIE (sanei_genesys_read_register (dev, REGA6, &val));
val |= REGA6_GPIO20;
RIE (sanei_genesys_write_register(dev,REGA6,val));
RIE (sanei_genesys_read_register (dev, REGA8, &val));
val &= ~REGA8_GPO27;
RIE (sanei_genesys_write_register (dev, REGA8, val));
RIE (sanei_genesys_read_register (dev, REGA9, &val));
val |= REGA9_GPO32|REGA9_GPO31;
RIE (sanei_genesys_write_register (dev, REGA9, val));
DBGCOMPLETED;
return status;
}
/** @brief light XPA lamp
* toggle gpios to switch off regular lamp and light on the
* XPA light
* @param dev device to set up
*/
#ifndef UNIT_TESTING
static
#endif
SANE_Status gl843_xpa_lamp_on(Genesys_Device *dev)
{
uint8_t val;
SANE_Status status=SANE_STATUS_GOOD;
DBGSTART;
/* REGA6 */
RIE(sanei_genesys_read_register(dev, REGA6, &val));
/* cut regular lamp power */
val &= ~(REGA6_GPIO24|REGA6_GPIO23);
/* set XPA lamp power */
val |= REGA6_GPIO22 | REGA6_GPIO21 | REGA6_GPIO19;
RIE(sanei_genesys_write_register(dev, REGA6, val));
RIE(sanei_genesys_read_register(dev, REGA7, &val));
val|=REGA7_GPOE24; /* lamp 1 off GPOE 24 */
val|=REGA7_GPOE23; /* lamp 2 off GPOE 23 */
val|=REGA7_GPOE22; /* full XPA lamp power */
RIE(sanei_genesys_write_register(dev, REGA7, val));
DBGCOMPLETED;
return status;
}
/* Send the low-level scan command */
#ifndef UNIT_TESTING
static
#endif
SANE_Status
gl843_begin_scan (Genesys_Device * dev, Genesys_Register_Set * reg,
SANE_Bool start_motor)
{
SANE_Status status;
uint8_t val,r03;
uint16_t dpiset, dpihw;
DBGSTART;
/* get back the target dpihw */
sanei_genesys_get_double (reg, REG_DPISET, &dpiset);
dpihw = sanei_genesys_compute_dpihw (dev, dpiset);
/* set up GPIO for scan */
switch(dev->model->gpo_type)
{
/* KV case */
case GPO_KVSS080:
RIE (sanei_genesys_write_register (dev, REGA9, 0x00));
RIE (sanei_genesys_write_register (dev, REGA6, 0xf6));
/* blinking led */
RIE (sanei_genesys_write_register (dev, 0x7e, 0x04));
break;
case GPO_G4050:
RIE (sanei_genesys_write_register (dev, REGA7, 0xfe));
RIE (sanei_genesys_write_register (dev, REGA8, 0x3e));
RIE (sanei_genesys_write_register (dev, REGA9, 0x06));
switch (dpihw)
{
case 1200:
case 2400:
case 4800:
RIE (sanei_genesys_write_register (dev, REG6C, 0x60));
RIE (sanei_genesys_write_register (dev, REGA6, 0x46));
break;
default: /* 600 dpi case */
RIE (sanei_genesys_write_register (dev, REG6C, 0x20));
RIE (sanei_genesys_write_register (dev, REGA6, 0x44));
}
/* turn on XPA lamp if XPA is selected and lamp power on*/
r03 = sanei_genesys_read_reg_from_set (reg, REG03);
if ((r03 & REG03_XPASEL) && (r03 & REG03_LAMPPWR))
{
RIE(gl843_xpa_lamp_on(dev));
}
/* enable XPA lamp motor */
if (r03 & REG03_XPASEL)
{
RIE(gl843_xpa_motor_on(dev));
}
/* blinking led */
RIE (sanei_genesys_write_register (dev, REG7E, 0x01));
break;
case GPO_CS4400F:
case GPO_CS8400F:
default:
break;
}
/* clear scan and feed count */
RIE (sanei_genesys_write_register
(dev, REG0D, REG0D_CLRLNCNT | REG0D_CLRMCNT));
/* enable scan and motor */
RIE (sanei_genesys_read_register (dev, REG01, &val));
val |= REG01_SCAN;
RIE (sanei_genesys_write_register (dev, REG01, val));
if (start_motor)
{
RIE (sanei_genesys_write_register (dev, REG0F, 1));
}
else
{
RIE (sanei_genesys_write_register (dev, REG0F, 0));
}
DBGCOMPLETED;
return status;
}
/* Send the stop scan command */
#ifndef UNIT_TESTING
static
#endif
SANE_Status
gl843_end_scan (Genesys_Device * dev, Genesys_Register_Set * reg,
SANE_Bool check_stop)
{
SANE_Status status;
uint8_t val;
DBG (DBG_proc, "gl843_end_scan (check_stop = %d)\n", check_stop);
if (reg == NULL)
return SANE_STATUS_INVAL;
/* post scan gpio */
RIE(sanei_genesys_write_register(dev,0x7e,0x00));
/* turn off XPA lamp if XPA is selected and lamp power on*/
val = sanei_genesys_read_reg_from_set (reg, REG03);
if (val & (REG03_XPASEL|REG03_LAMPPWR))
{
sanei_genesys_read_register (dev, REGA6, &val);
/* switch on regular lamp */
val |= 0x40;
/* no XPA lamp power (2 bits for level: __11 ____) */
val &= ~0x30;
RIE (sanei_genesys_write_register (dev, REGA6, val));
}
if (dev->model->is_sheetfed == SANE_TRUE)
{
status = SANE_STATUS_GOOD;
}
else /* flat bed scanners */
{
status = gl843_stop_action (dev);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_end_scan: failed to stop: %s\n",
sane_strstatus (status));
return status;
}
}
DBGCOMPLETED;
return status;
}
/** @brief park XPA lamp
* park the XPA lamp if needed
*/
static SANE_Status gl843_park_xpa_lamp (Genesys_Device * dev)
{
Genesys_Register_Set local_reg[GENESYS_GL843_MAX_REGS];
SANE_Status status;
Genesys_Register_Set *r;
uint8_t val;
int loop = 0;
DBGSTART;
/* copy scan settings */
memcpy (local_reg, dev->reg, GENESYS_GL843_MAX_REGS * sizeof (Genesys_Register_Set));
/* set a huge feedl and reverse direction */
sanei_genesys_set_triple(local_reg,REG_FEEDL,0xbdcd);
/* clear scan and feed count */
RIE (sanei_genesys_write_register (dev, REG0D, REG0D_CLRLNCNT | REG0D_CLRMCNT));
/* set up for reverse and no scan */
r = sanei_genesys_get_address (local_reg, REG02);
r->value |= REG02_MTRREV;
r = sanei_genesys_get_address (local_reg, REG01);
r->value &= ~REG01_SCAN;
/* write to scanner and start action */
RIE (dev->model->cmd_set->bulk_write_register (dev, local_reg, GENESYS_GL843_MAX_REGS));
RIE (gl843_xpa_motor_on(dev));
status = gl843_start_action (dev);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error, "%s: failed to start motor: %s\n",__func__, sane_strstatus (status));
gl843_stop_action (dev);
/* restore original registers */
dev->model->cmd_set->bulk_write_register (dev, dev->reg, GENESYS_GL843_MAX_REGS);
return status;
}
while (loop < 600) /* do not wait longer then 60 seconds */
{
status = sanei_genesys_get_status (dev, &val);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"%s: failed to read home sensor: %s\n",__func__,
sane_strstatus (status));
return status;
}
if (DBG_LEVEL >= DBG_io2)
{
sanei_genesys_print_status (val);
}
if (val & REG41_HOMESNR) /* home sensor */
{
DBG (DBG_info, "%s: reached home position\n",__func__);
DBG (DBG_proc, "%s: finished\n",__func__);
/* clear GPOADF to avoid reparking again */
sanei_genesys_read_register (dev, REG6B, &val);
val &= ~REG6B_GPOADF;
sanei_genesys_write_register (dev, REG6B, val);
/* disable XPA slider motor */
gl843_xpa_motor_off(dev);
return SANE_STATUS_GOOD;
}
usleep (100000); /* sleep 100 ms */
++loop;
}
/* we are not parked here.... should we fail ? */
DBG (DBG_info, "%s: XPA lamp is not parked\n", __func__);
DBGCOMPLETED;
return SANE_STATUS_GOOD;
}
/** @brief Moves the slider to the home (top) position slowly
* */
#ifndef UNIT_TESTING
static
#endif
SANE_Status
gl843_slow_back_home (Genesys_Device * dev, SANE_Bool wait_until_home)
{
Genesys_Register_Set local_reg[GENESYS_GL843_MAX_REGS];
SANE_Status status;
Genesys_Register_Set *r;
uint8_t val;
float resolution;
int loop = 0;
DBG (DBG_proc, "gl843_slow_back_home (wait_until_home = %d)\n",
wait_until_home);
if (dev->model->gpo_type == GPO_G4050)
{
/* test if we need to park XPA lamp, we check GPOADF */
RIE (sanei_genesys_read_register (dev, REG6B, &val));
if(val & REG6B_GPOADF)
{
RIE(gl843_park_xpa_lamp(dev));
}
}
/* regular slow back home */
dev->scanhead_position_in_steps = 0;
/* first read gives HOME_SENSOR true */
status = sanei_genesys_get_status (dev, &val);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error, "%s: failed to read home sensor: %s\n", __func__, sane_strstatus (status));
return status;
}
usleep (100000); /* sleep 100 ms */
/* second is reliable */
status = sanei_genesys_get_status (dev, &val);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_slow_back_home: failed to read home sensor: %s\n",
sane_strstatus (status));
return status;
}
if (DBG_LEVEL >= DBG_io)
{
sanei_genesys_print_status (val);
}
if (val & HOMESNR) /* is sensor at home? */
{
DBGCOMPLETED;
return SANE_STATUS_GOOD;
}
memcpy (local_reg, dev->reg, GENESYS_GL843_MAX_REGS * sizeof (Genesys_Register_Set));
resolution=sanei_genesys_get_lowest_ydpi(dev);
status = gl843_init_scan_regs (dev,
local_reg,
resolution,
resolution,
100,
40000,
100,
100,
8,
1,
SCAN_MODE_LINEART,
dev->settings.color_filter,
SCAN_FLAG_DISABLE_SHADING |
SCAN_FLAG_DISABLE_GAMMA |
SCAN_FLAG_DISABLE_BUFFER_FULL_MOVE |
SCAN_FLAG_IGNORE_LINE_DISTANCE);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_slow_back_home: failed to set up registers: %s\n",
sane_strstatus (status));
DBGCOMPLETED;
return status;
}
/* clear scan and feed count */
RIE (sanei_genesys_write_register (dev, REG0D, REG0D_CLRLNCNT | REG0D_CLRMCNT));
/* set up for reverse and no scan */
r = sanei_genesys_get_address (local_reg, REG02);
r->value |= REG02_MTRREV;
r = sanei_genesys_get_address (local_reg, REG01);
r->value &= ~REG01_SCAN;
RIE (dev->model->cmd_set->bulk_write_register (dev, local_reg, GENESYS_GL843_MAX_REGS));
status = gl843_start_action (dev);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_slow_back_home: failed to start motor: %s\n",
sane_strstatus (status));
gl843_stop_action (dev);
/* restore original registers */
dev->model->cmd_set->bulk_write_register (dev, dev->reg, GENESYS_GL843_MAX_REGS);
return status;
}
if (wait_until_home)
{
while (loop < 300) /* do not wait longer then 30 seconds */
{
status = sanei_genesys_get_status (dev, &val);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_slow_back_home: failed to read home sensor: %s\n",
sane_strstatus (status));
return status;
}
if (DBG_LEVEL >= DBG_io2)
{
sanei_genesys_print_status (val);
}
if (val & REG41_HOMESNR) /* home sensor */
{
DBG (DBG_info, "gl843_slow_back_home: reached home position\n");
DBG (DBG_proc, "gl843_slow_back_home: finished\n");
return SANE_STATUS_GOOD;
}
usleep (100000); /* sleep 100 ms */
++loop;
}
/* when we come here then the scanner needed too much time for this, so we better stop the motor */
gl843_stop_action (dev);
DBG (DBG_error,
"gl843_slow_back_home: timeout while waiting for scanhead to go home\n");
return SANE_STATUS_IO_ERROR;
}
DBG (DBG_info, "%s: scanhead is still moving\n", __func__);
DBGCOMPLETED;
return SANE_STATUS_GOOD;
}
/* Automatically set top-left edge of the scan area by scanning a 200x200 pixels
area at 600 dpi from very top of scanner */
static SANE_Status
gl843_search_start_position (Genesys_Device * dev)
{
int size;
SANE_Status status;
uint8_t *data;
Genesys_Register_Set local_reg[GENESYS_GL843_MAX_REGS];
int steps;
int pixels = 600;
int dpi = 300;
DBG (DBG_proc, "gl843_search_start_position\n");
memcpy (local_reg, dev->reg, GENESYS_GL843_MAX_REGS * sizeof (Genesys_Register_Set));
/* sets for a 200 lines * 600 pixels */
/* normal scan with no shading */
status = gl843_init_scan_regs (dev,
local_reg,
dpi,
dpi,
0,
0, /*we should give a small offset here~60 steps */
600,
dev->model->search_lines,
8,
1,
SCAN_MODE_GRAY,
1, /*green */
SCAN_FLAG_DISABLE_SHADING |
SCAN_FLAG_DISABLE_GAMMA |
SCAN_FLAG_IGNORE_LINE_DISTANCE |
SCAN_FLAG_DISABLE_BUFFER_FULL_MOVE);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_search_start_position: failed to bulk setup registers: %s\n",
sane_strstatus (status));
return status;
}
/* send to scanner */
status = dev->model->cmd_set->bulk_write_register (dev, local_reg, GENESYS_GL843_MAX_REGS);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_search_start_position: failed to bulk write registers: %s\n",
sane_strstatus (status));
return status;
}
size = pixels * dev->model->search_lines;
data = malloc (size);
if (!data)
{
DBG (DBG_error,
"gl843_search_start_position: failed to allocate memory\n");
return SANE_STATUS_NO_MEM;
}
status = gl843_begin_scan (dev, local_reg, SANE_TRUE);
if (status != SANE_STATUS_GOOD)
{
free (data);
DBG (DBG_error,
"gl843_search_start_position: failed to begin scan: %s\n",
sane_strstatus (status));
return status;
}
/* waits for valid data */
do
sanei_genesys_test_buffer_empty (dev, &steps);
while (steps);
/* now we're on target, we can read data */
status = sanei_genesys_read_data_from_scanner (dev, data, size);
if (status != SANE_STATUS_GOOD)
{
free (data);
DBG (DBG_error,
"gl843_search_start_position: failed to read data: %s\n",
sane_strstatus (status));
return status;
}
if (DBG_LEVEL >= DBG_data)
sanei_genesys_write_pnm_file ("search_position.pnm", data, 8, 1, pixels,
dev->model->search_lines);
status = gl843_end_scan (dev, local_reg, SANE_TRUE);
if (status != SANE_STATUS_GOOD)
{
free (data);
DBG (DBG_error,
"gl843_search_start_position: failed to end scan: %s\n",
sane_strstatus (status));
return status;
}
/* update regs to copy ASIC internal state */
memcpy (dev->reg, local_reg, GENESYS_GL843_MAX_REGS * sizeof (Genesys_Register_Set));
status =
sanei_genesys_search_reference_point (dev, data, 0, dpi, pixels,
dev->model->search_lines);
if (status != SANE_STATUS_GOOD)
{
free (data);
DBG (DBG_error,
"gl843_search_start_position: failed to set search reference point: %s\n",
sane_strstatus (status));
return status;
}
free (data);
return SANE_STATUS_GOOD;
}
/*
* sets up register for coarse gain calibration
* todo: check it for scanners using it */
static SANE_Status
gl843_init_regs_for_coarse_calibration (Genesys_Device * dev)
{
SANE_Status status;
uint8_t channels;
uint8_t cksel;
DBGSTART;
cksel = (dev->calib_reg[reg_0x18].value & REG18_CKSEL) + 1; /* clock speed = 1..4 clocks */
/* set line size */
if (dev->settings.scan_mode == SCAN_MODE_COLOR) /* single pass color */
channels = 3;
else
channels = 1;
status = gl843_init_scan_regs (dev,
dev->calib_reg,
dev->settings.xres,
dev->settings.yres,
0,
0,
/* XXX STEF XXX dpi instead of pixels !*/
dev->sensor.optical_res / cksel,
20,
16,
channels,
dev->settings.scan_mode,
dev->settings.color_filter,
SCAN_FLAG_DISABLE_SHADING |
SCAN_FLAG_DISABLE_GAMMA |
SCAN_FLAG_SINGLE_LINE |
SCAN_FLAG_IGNORE_LINE_DISTANCE);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_init_register_for_coarse_calibration: failed to setup scan: %s\n",
sane_strstatus (status));
return status;
}
gl843_set_motor_power (dev->calib_reg, SANE_FALSE);
DBG (DBG_info,
"gl843_init_register_for_coarse_calibration: optical sensor res: %d dpi, actual res: %d\n",
dev->sensor.optical_res / cksel, dev->settings.xres);
status = dev->model->cmd_set->bulk_write_register (dev, dev->calib_reg, GENESYS_GL843_MAX_REGS);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_init_register_for_coarse_calibration: failed to bulk write registers: %s\n",
sane_strstatus (status));
return status;
}
DBGCOMPLETED;
return SANE_STATUS_GOOD;
}
/** @brief moves the slider to steps at motor base dpi
* @param dev device to work on
* @param steps number of steps to move
* */
#ifndef UNIT_TESTING
static
#endif
SANE_Status
gl843_feed (Genesys_Device * dev, unsigned int steps)
{
Genesys_Register_Set local_reg[GENESYS_GL843_MAX_REGS];
SANE_Status status;
Genesys_Register_Set *r;
float resolution;
uint8_t val;
DBGSTART;
/* prepare local registers */
memcpy (local_reg, dev->reg, GENESYS_GL843_MAX_REGS * sizeof (Genesys_Register_Set));
resolution=sanei_genesys_get_lowest_ydpi(dev);
status = gl843_init_scan_regs (dev,
local_reg,
resolution,
resolution,
0,
steps,
100,
3,
8,
3,
SCAN_MODE_COLOR,
0,
SCAN_FLAG_DISABLE_SHADING |
SCAN_FLAG_DISABLE_GAMMA |
SCAN_FLAG_FEEDING |
SCAN_FLAG_IGNORE_LINE_DISTANCE);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_feed: failed to set up registers: %s\n",
sane_strstatus (status));
DBGCOMPLETED;
return status;
}
/* clear scan and feed count */
RIE (sanei_genesys_write_register (dev, REG0D, REG0D_CLRLNCNT));
RIE (sanei_genesys_write_register (dev, REG0D, REG0D_CLRMCNT));
/* set up for no scan */
r = sanei_genesys_get_address (local_reg, REG01);
r->value &= ~REG01_SCAN;
/* send registers */
RIE (dev->model->cmd_set->bulk_write_register (dev, local_reg, GENESYS_GL843_MAX_REGS));
status = gl843_start_action (dev);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error, "%s: failed to start motor: %s\n", __func__, sane_strstatus (status));
gl843_stop_action (dev);
/* restore original registers */
dev->model->cmd_set->bulk_write_register (dev, dev->reg, GENESYS_GL843_MAX_REGS);
return status;
}
/* wait until feed count reaches the required value, but do not
* exceed 30s */
do
{
status = sanei_genesys_get_status (dev, &val);
}
while (status == SANE_STATUS_GOOD && !(val & FEEDFSH));
DBGCOMPLETED;
return SANE_STATUS_GOOD;
}
/* init registers for shading calibration */
/* shading calibration is done at dpihw */
static SANE_Status
gl843_init_regs_for_shading (Genesys_Device * dev)
{
SANE_Status status;
int move, resolution, dpihw, factor;
uint16_t strpixel;
DBGSTART;
/* initial calibration reg values */
memcpy (dev->calib_reg, dev->reg, GENESYS_GL843_MAX_REGS * sizeof (Genesys_Register_Set));
dev->calib_channels = 3;
dev->calib_lines = dev->model->shading_lines;
dpihw=sanei_genesys_compute_dpihw(dev,dev->settings.xres);
factor=dev->sensor.optical_res/dpihw;
resolution=dpihw;
dev->calib_resolution = resolution;
dev->calib_pixels = dev->sensor.sensor_pixels/factor;
/* distance to move to reach white target */
move = SANE_UNFIX (dev->model->y_offset_calib);
move = (move * resolution) / MM_PER_INCH;
status = gl843_init_scan_regs (dev,
dev->calib_reg,
resolution,
resolution,
0,
move,
dev->calib_pixels,
dev->calib_lines,
16,
dev->calib_channels,
dev->settings.scan_mode,
dev->settings.color_filter,
SCAN_FLAG_DISABLE_SHADING |
SCAN_FLAG_DISABLE_GAMMA |
SCAN_FLAG_DISABLE_BUFFER_FULL_MOVE |
SCAN_FLAG_IGNORE_LINE_DISTANCE);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_init_registers_for_shading: failed to setup scan: %s\n",
sane_strstatus (status));
return status;
}
dev->scanhead_position_in_steps += dev->calib_lines + move;
sanei_genesys_get_double(dev->calib_reg,REG_STRPIXEL,&strpixel);
DBG (DBG_info, "%s: STRPIXEL=%d\n", __func__, strpixel);
status = dev->model->cmd_set->bulk_write_register (dev, dev->calib_reg, GENESYS_GL843_MAX_REGS);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_init_registers_for_shading: failed to bulk write registers: %s\n",
sane_strstatus (status));
return status;
}
DBGCOMPLETED;
return SANE_STATUS_GOOD;
}
/** @brief set up registers for the actual scan
*/
static SANE_Status
gl843_init_regs_for_scan (Genesys_Device * dev)
{
int channels;
int flags;
int depth;
float move;
int move_dpi;
float start;
SANE_Status status;
DBG (DBG_info,
"gl843_init_regs_for_scan settings:\nResolution: %ux%uDPI\n"
"Lines : %u\npixels : %u\nStartpos : %.3f/%.3f\nScan mode : %d\n\n",
dev->settings.xres,
dev->settings.yres,
dev->settings.lines,
dev->settings.pixels,
dev->settings.tl_x,
dev->settings.tl_y,
dev->settings.scan_mode);
/* ensure head is parked in case of calibration */
gl843_slow_back_home (dev, SANE_TRUE);
/* channels */
if (dev->settings.scan_mode == SCAN_MODE_COLOR)
channels = 3;
else
channels = 1;
/* depth */
depth = dev->settings.depth;
if (dev->settings.scan_mode == SCAN_MODE_LINEART)
depth = 1;
move_dpi = dev->motor.base_ydpi;
move = SANE_UNFIX (dev->model->y_offset);
move += dev->settings.tl_y;
move = (move * move_dpi) / MM_PER_INCH;
DBG (DBG_info, "gl843_init_regs_for_scan: move=%f steps\n", move);
/* start */
start = SANE_UNFIX (dev->model->x_offset);
start += dev->settings.tl_x;
start = (start * dev->sensor.optical_res) / MM_PER_INCH;
flags = 0;
/* enable emulated lineart from gray data */
if(dev->settings.scan_mode == SCAN_MODE_LINEART
&& dev->settings.dynamic_lineart)
{
flags |= SCAN_FLAG_DYNAMIC_LINEART;
}
status = gl843_init_scan_regs (dev,
dev->reg,
dev->settings.xres,
dev->settings.yres,
start,
move,
dev->settings.pixels,
dev->settings.lines,
depth,
channels,
dev->settings.scan_mode,
dev->settings.color_filter,
flags);
if (status != SANE_STATUS_GOOD)
return status;
DBGCOMPLETED;
return SANE_STATUS_GOOD;
}
/**
* This function sends gamma tables to ASIC
*/
static SANE_Status
gl843_send_gamma_table (Genesys_Device * dev)
{
int size;
int status;
uint8_t *gamma;
int i;
DBGSTART;
size = 256;
/* allocate temporary gamma tables: 16 bits words, 3 channels */
gamma = (uint8_t *) malloc (size * 2 * 3);
if (!gamma)
return SANE_STATUS_NO_MEM;
/* copy sensor specific's gamma tables */
for (i = 0; i < size; i++)
{
gamma[i * 2 + size * 0 + 0] = dev->sensor.gamma_table[GENESYS_RED][i] & 0xff;
gamma[i * 2 + size * 0 + 1] = (dev->sensor.gamma_table[GENESYS_RED][i] >> 8) & 0xff;
gamma[i * 2 + size * 2 + 0] = dev->sensor.gamma_table[GENESYS_GREEN][i] & 0xff;
gamma[i * 2 + size * 2 + 1] = (dev->sensor.gamma_table[GENESYS_GREEN][i] >> 8) & 0xff;
gamma[i * 2 + size * 4 + 0] = dev->sensor.gamma_table[GENESYS_BLUE][i] & 0xff;
gamma[i * 2 + size * 4 + 1] = (dev->sensor.gamma_table[GENESYS_BLUE][i] >> 8) & 0xff;
}
/* send address */
status = gl843_set_buffer_address (dev, 0x0000);
if (status != SANE_STATUS_GOOD)
{
free (gamma);
DBG (DBG_error,
"gl843_send_gamma_table: failed to set buffer address: %s\n",
sane_strstatus (status));
return status;
}
/* send data */
status = gl843_bulk_write_data (dev, 0x28, (uint8_t *) gamma, size * 2 * 3);
if (status != SANE_STATUS_GOOD)
{
free (gamma);
DBG (DBG_error,
"gl843_send_gamma_table: failed to send gamma table: %s\n",
sane_strstatus (status));
return status;
}
DBG (DBG_proc, "gl843_send_gamma_table: completed\n");
free (gamma);
return SANE_STATUS_GOOD;
}
/* this function does the led calibration by scanning one line of the calibration
area below scanner's top on white strip.
-needs working coarse/gain
*/
static SANE_Status
gl843_led_calibration (Genesys_Device * dev)
{
int num_pixels;
int total_size;
int used_res;
uint8_t *line;
int i, j;
SANE_Status status = SANE_STATUS_GOOD;
int val;
int channels, depth;
int avg[3], avga, avge;
int turn;
char fn[20];
uint16_t expr, expg, expb;
Genesys_Register_Set *r;
SANE_Bool acceptable = SANE_FALSE;
DBG (DBG_proc, "gl843_led_calibration\n");
/* offset calibration is always done in color mode */
channels = 3;
depth = 16;
used_res = dev->sensor.optical_res;
num_pixels =
(dev->sensor.sensor_pixels * used_res) / dev->sensor.optical_res;
/* initial calibration reg values */
memcpy (dev->calib_reg, dev->reg,
GENESYS_GL843_MAX_REGS * sizeof (Genesys_Register_Set));
status = gl843_init_scan_regs (dev,
dev->calib_reg,
used_res,
dev->motor.base_ydpi,
0,
0,
num_pixels,
1,
depth,
channels,
SCAN_MODE_COLOR,
dev->settings.color_filter,
SCAN_FLAG_DISABLE_SHADING |
SCAN_FLAG_DISABLE_GAMMA |
SCAN_FLAG_SINGLE_LINE |
SCAN_FLAG_IGNORE_LINE_DISTANCE);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_led_calibration: failed to setup scan: %s\n",
sane_strstatus (status));
return status;
}
RIE (dev->model->cmd_set->bulk_write_register
(dev, dev->calib_reg, GENESYS_GL843_MAX_REGS));
total_size = num_pixels * channels * (depth / 8) * 1; /* colors * bytes_per_color * scan lines */
line = malloc (total_size);
if (!line)
return SANE_STATUS_NO_MEM;
/*
we try to get equal bright leds here:
loop:
average per color
adjust exposure times
*/
expr = (dev->sensor.regs_0x10_0x1d[0] << 8) | dev->sensor.regs_0x10_0x1d[1];
expg = (dev->sensor.regs_0x10_0x1d[2] << 8) | dev->sensor.regs_0x10_0x1d[3];
expb = (dev->sensor.regs_0x10_0x1d[4] << 8) | dev->sensor.regs_0x10_0x1d[5];
turn = 0;
do
{
dev->sensor.regs_0x10_0x1d[0] = (expr >> 8) & 0xff;
dev->sensor.regs_0x10_0x1d[1] = expr & 0xff;
dev->sensor.regs_0x10_0x1d[2] = (expg >> 8) & 0xff;
dev->sensor.regs_0x10_0x1d[3] = expg & 0xff;
dev->sensor.regs_0x10_0x1d[4] = (expb >> 8) & 0xff;
dev->sensor.regs_0x10_0x1d[5] = expb & 0xff;
for (i = 0; i < 6; i++)
{
r = sanei_genesys_get_address (dev->calib_reg, 0x10 + i);
r->value = dev->sensor.regs_0x10_0x1d[i];
}
RIE (dev->model->cmd_set->bulk_write_register
(dev, dev->calib_reg, GENESYS_GL843_MAX_REGS));
DBG (DBG_info, "gl843_led_calibration: starting first line reading\n");
RIE (gl843_begin_scan (dev, dev->calib_reg, SANE_TRUE));
RIE (sanei_genesys_read_data_from_scanner (dev, line, total_size));
if (DBG_LEVEL >= DBG_data)
{
snprintf (fn, 20, "led_%02d.pnm", turn);
sanei_genesys_write_pnm_file (fn,
line, depth, channels, num_pixels, 1);
}
acceptable = SANE_TRUE;
for (j = 0; j < channels; j++)
{
avg[j] = 0;
for (i = 0; i < num_pixels; i++)
{
if (dev->model->is_cis)
val =
line[i * 2 + j * 2 * num_pixels + 1] * 256 +
line[i * 2 + j * 2 * num_pixels];
else
val =
line[i * 2 * channels + 2 * j + 1] * 256 +
line[i * 2 * channels + 2 * j];
avg[j] += val;
}
avg[j] /= num_pixels;
}
DBG (DBG_info, "gl843_led_calibration: average: "
"%d,%d,%d\n", avg[0], avg[1], avg[2]);
acceptable = SANE_TRUE;
if (avg[0] < avg[1] * 0.95 || avg[1] < avg[0] * 0.95 ||
avg[0] < avg[2] * 0.95 || avg[2] < avg[0] * 0.95 ||
avg[1] < avg[2] * 0.95 || avg[2] < avg[1] * 0.95)
acceptable = SANE_FALSE;
if (!acceptable)
{
avga = (avg[0] + avg[1] + avg[2]) / 3;
expr = (expr * avga) / avg[0];
expg = (expg * avga) / avg[1];
expb = (expb * avga) / avg[2];
/*
keep the resulting exposures below this value.
too long exposure drives the ccd into saturation.
we may fix this by relying on the fact that
we get a striped scan without shading, by means of
statistical calculation
*/
avge = (expr + expg + expb) / 3;
/* don't overflow max exposure */
if (avge > 3000)
{
expr = (expr * 2000) / avge;
expg = (expg * 2000) / avge;
expb = (expb * 2000) / avge;
}
if (avge < 50)
{
expr = (expr * 50) / avge;
expg = (expg * 50) / avge;
expb = (expb * 50) / avge;
}
}
RIE (gl843_stop_action (dev));
turn++;
}
while (!acceptable && turn < 100);
DBG (DBG_info, "gl843_led_calibration: acceptable exposure: %d,%d,%d\n",
expr, expg, expb);
/* cleanup before return */
free (line);
gl843_slow_back_home (dev, SANE_TRUE);
DBG (DBG_proc, "gl843_led_calibration: completed\n");
return status;
}
/**
* average dark pixels of a 8 bits scan of a given channel
*/
static int
dark_average_channel (uint8_t * data, unsigned int pixels, unsigned int lines,
unsigned int channels, unsigned int black, int channel)
{
unsigned int i, j, k, count;
unsigned int avg[3];
uint8_t val;
/* computes average values on black margin */
for (k = 0; k < channels; k++)
{
avg[k] = 0;
count = 0;
for (i = 0; i < lines; i++)
{
for (j = 0; j < black; j++)
{
val = data[i * channels * pixels + j*channels + k];
avg[k] += val;
count++;
}
}
if (count)
avg[k] /= count;
DBG (DBG_info, "%s: avg[%d] = %d\n", __func__, k, avg[k]);
}
DBG (DBG_info, "%s: average = %d\n", __func__, avg[channel]);
return avg[channel];
}
/** @brief calibrate AFE offset
* Iterate doing scans at target dpi until AFE offset if correct. One
* color line is scanned at a time. Scanning head doesn't move.
* @param dev device to calibrate
*/
static SANE_Status
gl843_offset_calibration (Genesys_Device * dev)
{
SANE_Status status = SANE_STATUS_GOOD;
uint8_t *first_line, *second_line;
unsigned int channels, bpp;
char title[32];
int pass, total_size, i, resolution, lines;
int topavg[3], bottomavg[3], avg[3];
int top[3], bottom[3], black_pixels, pixels, factor, dpihw;
DBGSTART;
/* offset calibration is always done in color mode */
channels = 3;
lines = 8;
bpp = 8;
/* compute divider factor to compute final pixels number */
dpihw = sanei_genesys_compute_dpihw (dev, dev->settings.xres);
factor = dev->sensor.optical_res / dpihw;
resolution = dpihw;
pixels = dev->sensor.sensor_pixels / factor;
black_pixels = dev->sensor.black_pixels / factor;
DBG (DBG_io, "gl843_offset_calibration: dpihw =%d\n", dpihw);
DBG (DBG_io, "gl843_offset_calibration: factor =%d\n", factor);
DBG (DBG_io, "gl843_offset_calibration: resolution =%d\n", resolution);
DBG (DBG_io, "gl843_offset_calibration: pixels =%d\n", pixels);
DBG (DBG_io, "gl843_offset_calibration: black_pixels=%d\n", black_pixels);
status = gl843_init_scan_regs (dev,
dev->calib_reg,
resolution,
resolution,
0,
0,
pixels,
lines,
bpp,
channels,
SCAN_MODE_COLOR,
0,
SCAN_FLAG_DISABLE_SHADING |
SCAN_FLAG_DISABLE_GAMMA |
SCAN_FLAG_SINGLE_LINE |
SCAN_FLAG_IGNORE_LINE_DISTANCE);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error, "gl843_offset_calibration: failed to setup scan: %s\n",
sane_strstatus (status));
return status;
}
gl843_set_motor_power (dev->calib_reg, SANE_FALSE);
/* allocate memory for scans */
total_size = pixels * channels * lines * (bpp / 8); /* colors * bytes_per_color * scan lines */
first_line = malloc (total_size);
if (!first_line)
return SANE_STATUS_NO_MEM;
second_line = malloc (total_size);
if (!second_line)
{
free (first_line);
return SANE_STATUS_NO_MEM;
}
/* init gain and offset */
for (i = 0; i < 3; i++)
{
bottom[i] = 10;
dev->frontend.offset[i] = bottom[i];
dev->frontend.gain[i] = 0;
}
RIEF2 (gl843_set_fe (dev, AFE_SET), first_line, second_line);
/* scan with obttom AFE settings */
RIEF2 (dev->model->cmd_set->bulk_write_register (dev, dev->calib_reg, GENESYS_GL843_MAX_REGS), first_line, second_line);
DBG (DBG_info, "gl843_offset_calibration: starting first line reading\n");
RIEF2 (gl843_begin_scan (dev, dev->calib_reg, SANE_TRUE), first_line, second_line);
RIEF2 (sanei_genesys_read_data_from_scanner (dev, first_line, total_size), first_line, second_line);
if (DBG_LEVEL >= DBG_data)
{
for (i = 0; i < 3; i++)
{
snprintf (title, 20, "offset_%d_%03d.pnm", i, bottom[i]);
sanei_genesys_write_pnm_file (title, first_line, bpp, channels, pixels, lines);
}
}
for (i = 0; i < 3; i++)
{
bottomavg[i] = dark_average_channel (first_line, pixels, lines, channels, black_pixels, i);
DBG (DBG_io2, "gl843_offset_calibration: bottom avg %d=%d\n", i, bottomavg[i]);
}
/* now top value */
for (i = 0; i < 3; i++)
{
top[i] = 255;
dev->frontend.offset[i] = top[i];
}
RIEF2 (gl843_set_fe (dev, AFE_SET), first_line, second_line);
/* scan with top AFE values */
RIEF2 (dev->model->cmd_set->bulk_write_register (dev, dev->calib_reg, GENESYS_GL843_MAX_REGS), first_line, second_line);
DBG (DBG_info, "gl843_offset_calibration: starting second line reading\n");
RIEF2 (gl843_begin_scan (dev, dev->calib_reg, SANE_TRUE), first_line, second_line);
RIEF2 (sanei_genesys_read_data_from_scanner (dev, second_line, total_size), first_line, second_line);
for (i = 0; i < 3; i++)
{
topavg[i] = dark_average_channel (second_line, pixels, lines, channels, black_pixels, i);
DBG (DBG_io2, "gl843_offset_calibration: top avg %d=%d\n", i, topavg[i]);
}
pass = 0;
/* loop until acceptable level */
while ((pass < 32)
&& ((top[0] - bottom[0] > 1)
|| (top[1] - bottom[1] > 1) || (top[2] - bottom[2] > 1)))
{
pass++;
/* settings for new scan */
for (i = 0; i < 3; i++)
{
if (top[i] - bottom[i] > 1)
{
dev->frontend.offset[i] = (top[i] + bottom[i]) / 2;
}
}
RIEF2 (gl843_set_fe (dev, AFE_SET), first_line, second_line);
/* scan with no move */
RIEF2 (dev->model->cmd_set->bulk_write_register (dev, dev->calib_reg, GENESYS_GL843_MAX_REGS), first_line, second_line);
DBG (DBG_info, "gl843_offset_calibration: starting second line reading\n");
RIEF2 (gl843_begin_scan (dev, dev->calib_reg, SANE_TRUE), first_line, second_line);
RIEF2 (sanei_genesys_read_data_from_scanner (dev, second_line, total_size), first_line, second_line);
if (DBG_LEVEL >= DBG_data)
{
for (i = 0; i < 3; i++)
{
sprintf (title, "offset_%d_%03d.pnm", i, dev->frontend.offset[i]);
sanei_genesys_write_pnm_file (title, second_line, bpp, channels, pixels, lines);
}
}
for (i = 0; i < 3; i++)
{
avg[i] = dark_average_channel (second_line, pixels, lines, channels, black_pixels, i);
DBG (DBG_info, "gl843_offset_calibration: avg[%d]=%d offset=%d\n", i, avg[i], dev->frontend.offset[i]);
}
/* compute new boundaries */
for (i = 0; i < 3; i++)
{
if (topavg[i] >= avg[i])
{
topavg[i] = avg[i];
top[i] = dev->frontend.offset[i];
}
else
{
bottomavg[i] = avg[i];
bottom[i] = dev->frontend.offset[i];
}
}
}
DBG (DBG_info, "gl843_offset_calibration: offset=(%d,%d,%d)\n",
dev->frontend.offset[0],
dev->frontend.offset[1],
dev->frontend.offset[2]);
/* cleanup before return */
free (first_line);
free (second_line);
DBGCOMPLETED;
return SANE_STATUS_GOOD;
}
/* alternative coarse gain calibration
this on uses the settings from offset_calibration and
uses only one scanline
*/
/*
with offset and coarse calibration we only want to get our input range into
a reasonable shape. the fine calibration of the upper and lower bounds will
be done with shading.
*/
static SANE_Status
gl843_coarse_gain_calibration (Genesys_Device * dev, int dpi)
{
int pixels, factor, dpihw;
int total_size;
uint8_t *line;
int i, j, channels;
SANE_Status status = SANE_STATUS_GOOD;
int max[3];
float gain[3],coeff;
int val, code, lines;
int resolution;
int bpp;
DBG (DBG_proc, "gl843_coarse_gain_calibration: dpi = %d\n", dpi);
dpihw=sanei_genesys_compute_dpihw(dev, dpi);
factor=dev->sensor.optical_res/dpihw;
/* coarse gain calibration is always done in color mode */
channels = 3;
/* follow CKSEL */
if (dev->model->ccd_type == CCD_KVSS080)
{
if(dev->settings.xres<dev->sensor.optical_res)
{
coeff=0.9;
}
else
{
coeff=1.0;
}
}
else
{
coeff=1.0;
}
resolution=dpihw;
lines=10;
bpp=8;
pixels = dev->sensor.sensor_pixels / factor;
status = gl843_init_scan_regs (dev,
dev->calib_reg,
resolution,
resolution,
0,
0,
pixels,
lines,
bpp,
channels,
SCAN_MODE_COLOR,
dev->settings.color_filter,
SCAN_FLAG_DISABLE_SHADING |
SCAN_FLAG_DISABLE_GAMMA |
SCAN_FLAG_SINGLE_LINE |
SCAN_FLAG_IGNORE_LINE_DISTANCE);
gl843_set_motor_power (dev->calib_reg, SANE_FALSE);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_coarse_calibration: failed to setup scan: %s\n",
sane_strstatus (status));
return status;
}
RIE (dev->model->cmd_set->bulk_write_register
(dev, dev->calib_reg, GENESYS_GL843_MAX_REGS));
total_size = pixels * channels * (16/bpp) * lines;
line = malloc (total_size);
if (!line)
return SANE_STATUS_NO_MEM;
RIEF (gl843_set_fe(dev, AFE_SET), line);
RIEF (gl843_begin_scan (dev, dev->calib_reg, SANE_TRUE), line);
RIEF (sanei_genesys_read_data_from_scanner (dev, line, total_size), line);
if (DBG_LEVEL >= DBG_data)
sanei_genesys_write_pnm_file ("coarse.pnm", line, bpp, channels, pixels, lines);
/* average value on each channel */
for (j = 0; j < channels; j++)
{
max[j] = 0;
for (i = pixels/4; i < (pixels*3/4); i++)
{
if(bpp==16)
{
if (dev->model->is_cis)
val =
line[i * 2 + j * 2 * pixels + 1] * 256 +
line[i * 2 + j * 2 * pixels];
else
val =
line[i * 2 * channels + 2 * j + 1] * 256 +
line[i * 2 * channels + 2 * j];
}
else
{
if (dev->model->is_cis)
val = line[i + j * pixels];
else
val = line[i * channels + j];
}
max[j] += val;
}
max[j] = max[j] / (pixels/2);
gain[j] = ((float) dev->sensor.gain_white_ref*coeff) / max[j];
/* turn logical gain value into gain code, checking for overflow */
code = 283 - 208 / gain[j];
if (code > 255)
code = 255;
else if (code < 0)
code = 0;
dev->frontend.gain[j] = code;
DBG (DBG_proc,
"gl843_coarse_gain_calibration: channel %d, max=%d, gain = %f, setting:%d\n",
j, max[j], gain[j], dev->frontend.gain[j]);
}
if (dev->model->is_cis)
{
if (dev->frontend.gain[0] > dev->frontend.gain[1])
dev->frontend.gain[0] = dev->frontend.gain[1];
if (dev->frontend.gain[0] > dev->frontend.gain[2])
dev->frontend.gain[0] = dev->frontend.gain[2];
dev->frontend.gain[2] = dev->frontend.gain[1] = dev->frontend.gain[0];
}
if (channels == 1)
{
dev->frontend.gain[0] = dev->frontend.gain[1];
dev->frontend.gain[2] = dev->frontend.gain[1];
}
free (line);
RIE (gl843_stop_action (dev));
status=gl843_slow_back_home (dev, SANE_TRUE);
DBGCOMPLETED;
return status;
}
/*
* wait for lamp warmup by scanning the same line until difference
* between 2 scans is below a threshold
*/
static SANE_Status
gl843_init_regs_for_warmup (Genesys_Device * dev,
Genesys_Register_Set * reg,
int *channels, int *total_size)
{
int num_pixels;
SANE_Status status = SANE_STATUS_GOOD;
int dpihw;
int resolution;
int factor;
DBGSTART;
if (dev == NULL || reg == NULL || channels == NULL || total_size == NULL)
return SANE_STATUS_INVAL;
/* setup scan */
*channels=3;
resolution=600;
dpihw=sanei_genesys_compute_dpihw(dev, resolution);
factor=dev->sensor.optical_res/dpihw;
num_pixels=dev->sensor.sensor_pixels/(factor*2);
*total_size = num_pixels * 3 * 1;
memcpy (reg, dev->reg, (GENESYS_GL843_MAX_REGS + 1) * sizeof (Genesys_Register_Set));
status = gl843_init_scan_regs (dev,
reg,
resolution,
resolution,
num_pixels/2,
0,
num_pixels,
1,
8,
*channels,
SCAN_MODE_COLOR,
dev->settings.color_filter,
SCAN_FLAG_DISABLE_SHADING |
SCAN_FLAG_DISABLE_GAMMA |
SCAN_FLAG_SINGLE_LINE |
SCAN_FLAG_IGNORE_LINE_DISTANCE);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error, "%s: failed to setup scan: %s\n", __func__, sane_strstatus (status));
return status;
}
gl843_set_motor_power (reg, SANE_FALSE);
RIE (dev->model->cmd_set->bulk_write_register (dev, reg, GENESYS_GL843_MAX_REGS));
DBGCOMPLETED;
return SANE_STATUS_GOOD;
}
/**
* set up GPIO/GPOE for idle state
WRITE GPIO[17-21]= GPIO19
WRITE GPOE[17-21]= GPOE21 GPOE20 GPOE19 GPOE18
genesys_write_register(0xa8,0x3e)
GPIO(0xa8)=0x3e
*/
static SANE_Status
gl843_init_gpio (Genesys_Device * dev)
{
SANE_Status status = SANE_STATUS_GOOD;
int idx;
DBGSTART;
RIE (sanei_genesys_write_register (dev, REG6E, dev->gpo.enable[0]));
RIE (sanei_genesys_write_register (dev, REG6F, dev->gpo.enable[1]));
RIE (sanei_genesys_write_register (dev, REG6C, dev->gpo.value[0]));
RIE (sanei_genesys_write_register (dev, REG6D, dev->gpo.value[1]));
idx=0;
while(dev->model->gpo_type != gpios[idx].gpo_type && gpios[idx].gpo_type!=0)
{
idx++;
}
if (gpios[idx].gpo_type!=0)
{
RIE (sanei_genesys_write_register (dev, REGA6, gpios[idx].ra6));
RIE (sanei_genesys_write_register (dev, REGA7, gpios[idx].ra7));
RIE (sanei_genesys_write_register (dev, REGA8, gpios[idx].ra8));
RIE (sanei_genesys_write_register (dev, REGA9, gpios[idx].ra9));
}
else
{
status=SANE_STATUS_INVAL;
}
DBGCOMPLETED;
return status;
}
/* *
* initialize ASIC from power on condition
*/
#ifndef UNIT_TESTING
static
#endif
SANE_Status
gl843_boot (Genesys_Device * dev, SANE_Bool cold)
{
SANE_Status status;
uint8_t val;
DBGSTART;
if(cold)
{
RIE (sanei_genesys_write_register (dev, 0x0e, 0x01));
RIE (sanei_genesys_write_register (dev, 0x0e, 0x00));
}
if(dev->usb_mode == 1)
{
val = 0x14;
}
else
{
val = 0x11;
}
RIE (sanei_genesys_write_0x8c (dev, 0x0f, val));
/* test CHKVER */
RIE (sanei_genesys_read_register (dev, REG40, &val));
if (val & REG40_CHKVER)
{
RIE (sanei_genesys_read_register (dev, 0x00, &val));
DBG (DBG_info,
"%s: reported version for genesys chip is 0x%02x\n", __func__,
val);
}
/* Set default values for registers */
gl843_init_registers (dev);
RIE (sanei_genesys_write_register (dev, REG6B, 0x02));
/* Write initial registers */
RIE (dev->model->cmd_set->bulk_write_register (dev, dev->reg, GENESYS_GL843_MAX_REGS));
/* Enable DRAM by setting a rising edge on bit 3 of reg 0x0b */
val = dev->reg[reg_0x0b].value & REG0B_DRAMSEL;
val = (val | REG0B_ENBDRAM);
RIE (sanei_genesys_write_register (dev, REG0B, val));
dev->reg[reg_0x0b].value = val;
/* URB 14 control 0x40 0x0c 0x8c 0x10 len 1 wrote 0xb4 */
RIE (sanei_genesys_write_0x8c (dev, 0x10, 0xb4));
/* CLKSET */
val = (dev->reg[reg_0x0b].value & ~REG0B_CLKSET) | REG0B_48MHZ;
RIE (sanei_genesys_write_register (dev, REG0B, val));
dev->reg[reg_0x0b].value = val;
/* prevent further writings by bulk write register */
dev->reg[reg_0x0b].address = 0x00;
/* set up end access */
sanei_genesys_write_register (dev, REGA7, 0x04);
sanei_genesys_write_register (dev, REGA9, 0x00);
/* set RAM read address */
RIE (sanei_genesys_write_register (dev, REG29, 0x00));
RIE (sanei_genesys_write_register (dev, REG2A, 0x00));
RIE (sanei_genesys_write_register (dev, REG2B, 0x00));
/* setup gpio */
RIE (gl843_init_gpio (dev));
gl843_feed (dev, 300);
usleep (100000);
DBGCOMPLETED;
return SANE_STATUS_GOOD;
}
/* *
* initialize backend and ASIC : registers, motor tables, and gamma tables
* then ensure scanner's head is at home
*/
#ifndef UNIT_TESTING
static
#endif
SANE_Status
gl843_init (Genesys_Device * dev)
{
SANE_Status status;
DBG_INIT ();
DBGSTART;
status=sanei_genesys_asic_init(dev, GENESYS_GL843_MAX_REGS);
DBGCOMPLETED;
return status;
}
static SANE_Status
gl843_update_hardware_sensors (Genesys_Scanner * s)
{
/* do what is needed to get a new set of events, but try to not lose
any of them.
*/
SANE_Status status = SANE_STATUS_GOOD;
uint8_t val;
RIE (sanei_genesys_read_register (s->dev, REG6D, &val));
switch (s->dev->model->gpo_type)
{
case GPO_KVSS080:
if (s->val[OPT_SCAN_SW].b == s->last_val[OPT_SCAN_SW].b)
s->val[OPT_SCAN_SW].b = (val & 0x04) == 0;
break;
case GPO_G4050:
if (s->val[OPT_SCAN_SW].b == s->last_val[OPT_SCAN_SW].b)
s->val[OPT_SCAN_SW].b = (val & 0x01) == 0;
if (s->val[OPT_FILE_SW].b == s->last_val[OPT_FILE_SW].b)
s->val[OPT_FILE_SW].b = (val & 0x02) == 0;
if (s->val[OPT_EMAIL_SW].b == s->last_val[OPT_EMAIL_SW].b)
s->val[OPT_EMAIL_SW].b = (val & 0x04) == 0;
if (s->val[OPT_COPY_SW].b == s->last_val[OPT_COPY_SW].b)
s->val[OPT_COPY_SW].b = (val & 0x08) == 0;
break;
case GPO_CS4400F:
case GPO_CS8400F:
default:
break;
}
return status;
}
#ifndef UNIT_TESTING
static
#endif
/** @brief move sensor to transparency adaptor
* Move sensor to the calibration of the transparency adapator (XPA).
* @param dev device to use
*/
SANE_Status gl843_move_to_ta (Genesys_Device * dev)
{
SANE_Status status = SANE_STATUS_GOOD;
float resolution;
unsigned int feed;
DBGSTART;
resolution=sanei_genesys_get_lowest_ydpi(dev);
feed = 16*(SANE_UNFIX (dev->model->y_offset_calib_ta) * resolution) / MM_PER_INCH;
status = gl843_feed (dev, feed);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error, "%s: failed to move to XPA calibration area\n", __func__);
return status;
}
DBGCOMPLETED;
return status;
}
/** @brief search for a full width black or white strip.
* This function searches for a black or white stripe across the scanning area.
* When searching backward, the searched area must completely be of the desired
* color since this area will be used for calibration which scans forward.
* @param dev scanner device
* @param forward SANE_TRUE if searching forward, SANE_FALSE if searching backward
* @param black SANE_TRUE if searching for a black strip, SANE_FALSE for a white strip
* @return SANE_STATUS_GOOD if a matching strip is found, SANE_STATUS_UNSUPPORTED if not
*/
static SANE_Status
gl843_search_strip (Genesys_Device * dev, SANE_Bool forward, SANE_Bool black)
{
unsigned int pixels, lines, channels;
SANE_Status status;
Genesys_Register_Set local_reg[GENESYS_GL843_MAX_REGS];
size_t size;
uint8_t *data;
int steps, depth, dpi;
unsigned int pass, count, found, x, y;
char title[80];
Genesys_Register_Set *r;
DBG (DBG_proc, "gl843_search_strip %s %s\n", black ? "black" : "white",
forward ? "forward" : "reverse");
gl843_set_fe (dev, AFE_SET);
status = gl843_stop_action (dev);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_search_strip: failed to stop: %s\n",
sane_strstatus (status));
return status;
}
/* set up for a gray scan at lowest dpi */
dpi = sanei_genesys_get_lowest_dpi(dev);
channels = 1;
/* 10 MM */
/* lines = (10 * dpi) / MM_PER_INCH; */
/* shading calibation is done with dev->motor.base_ydpi */
lines = (dev->model->shading_lines * dpi) / dev->motor.base_ydpi;
depth = 8;
pixels = (dev->sensor.sensor_pixels * dpi) / dev->sensor.optical_res;
size = pixels * channels * lines * (depth / 8);
data = malloc (size);
if (!data)
{
DBG (DBG_error, "gl843_search_strip: failed to allocate memory\n");
return SANE_STATUS_NO_MEM;
}
dev->scanhead_position_in_steps = 0;
memcpy (local_reg, dev->reg,
GENESYS_GL843_MAX_REGS * sizeof (Genesys_Register_Set));
status = gl843_init_scan_regs (dev,
local_reg,
dpi,
dpi,
0,
0,
pixels,
lines,
depth,
channels,
SCAN_MODE_GRAY,
0,
SCAN_FLAG_DISABLE_SHADING |
SCAN_FLAG_DISABLE_GAMMA);
if (status != SANE_STATUS_GOOD)
{
free(data);
DBG (DBG_error,
"gl843_search_strip: failed to setup for scan: %s\n",
sane_strstatus (status));
return status;
}
/* set up for reverse or forward */
r = sanei_genesys_get_address (local_reg, REG02);
if (forward)
r->value &= ~REG02_MTRREV;
else
r->value |= REG02_MTRREV;
status = dev->model->cmd_set->bulk_write_register (dev, local_reg, GENESYS_GL843_MAX_REGS);
if (status != SANE_STATUS_GOOD)
{
free(data);
DBG (DBG_error,
"gl843_search_strip: failed to bulk write registers: %s\n",
sane_strstatus (status));
return status;
}
status = gl843_begin_scan (dev, local_reg, SANE_TRUE);
if (status != SANE_STATUS_GOOD)
{
free (data);
DBG (DBG_error,
"gl843_search_strip: failed to begin scan: %s\n",
sane_strstatus (status));
return status;
}
/* waits for valid data */
do
sanei_genesys_test_buffer_empty (dev, &steps);
while (steps);
/* now we're on target, we can read data */
status = sanei_genesys_read_data_from_scanner (dev, data, size);
if (status != SANE_STATUS_GOOD)
{
free (data);
DBG (DBG_error,
"gl843_search_start_position: failed to read data: %s\n",
sane_strstatus (status));
return status;
}
status = gl843_stop_action (dev);
if (status != SANE_STATUS_GOOD)
{
free (data);
DBG (DBG_error, "gl843_search_strip: gl843_stop_action failed\n");
return status;
}
pass = 0;
if (DBG_LEVEL >= DBG_data)
{
sprintf (title, "search_strip_%s_%s%02d.pnm",
black ? "black" : "white", forward ? "fwd" : "bwd", (int)pass);
sanei_genesys_write_pnm_file (title, data, depth, channels, pixels,
lines);
}
/* loop until strip is found or maximum pass number done */
found = 0;
while (pass < 20 && !found)
{
status =
dev->model->cmd_set->bulk_write_register (dev, local_reg, GENESYS_GL843_MAX_REGS);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"gl843_search_strip: failed to bulk write registers: %s\n",
sane_strstatus (status));
return status;
}
/* now start scan */
status = gl843_begin_scan (dev, local_reg, SANE_TRUE);
if (status != SANE_STATUS_GOOD)
{
free (data);
DBG (DBG_error,
"gl843_search_strip: failed to begin scan: %s\n",
sane_strstatus (status));
return status;
}
/* waits for valid data */
do
sanei_genesys_test_buffer_empty (dev, &steps);
while (steps);
/* now we're on target, we can read data */
status = sanei_genesys_read_data_from_scanner (dev, data, size);
if (status != SANE_STATUS_GOOD)
{
free (data);
DBG (DBG_error,
"gl843_search_start_position: failed to read data: %s\n",
sane_strstatus (status));
return status;
}
status = gl843_stop_action (dev);
if (status != SANE_STATUS_GOOD)
{
free (data);
DBG (DBG_error, "gl843_search_strip: gl843_stop_action failed\n");
return status;
}
if (DBG_LEVEL >= DBG_data)
{
sprintf (title, "search_strip_%s_%s%02d.pnm",
black ? "black" : "white", forward ? "fwd" : "bwd", (int)pass);
sanei_genesys_write_pnm_file (title, data, depth, channels,
pixels, lines);
}
/* search data to find black strip */
/* when searching forward, we only need one line of the searched color since we
* will scan forward. But when doing backward search, we need all the area of the
* same color */
if (forward)
{
for (y = 0; y < lines && !found; y++)
{
count = 0;
/* count of white/black pixels depending on the color searched */
for (x = 0; x < pixels; x++)
{
/* when searching for black, detect white pixels */
if (black && data[y * pixels + x] > 90)
{
count++;
}
/* when searching for white, detect black pixels */
if (!black && data[y * pixels + x] < 60)
{
count++;
}
}
/* at end of line, if count >= 3%, line is not fully of the desired color
* so we must go to next line of the buffer */
/* count*100/pixels < 3 */
if ((count * 100) / pixels < 3)
{
found = 1;
DBG (DBG_data,
"gl843_search_strip: strip found forward during pass %d at line %d\n",
pass, y);
}
else
{
DBG (DBG_data,
"gl843_search_strip: pixels=%d, count=%d (%d%%)\n",
pixels, count, (100 * count) / pixels);
}
}
}
else /* since calibration scans are done forward, we need the whole area
to be of the required color when searching backward */
{
count = 0;
for (y = 0; y < lines; y++)
{
/* count of white/black pixels depending on the color searched */
for (x = 0; x < pixels; x++)
{
/* when searching for black, detect white pixels */
if (black && data[y * pixels + x] > 90)
{
count++;
}
/* when searching for white, detect black pixels */
if (!black && data[y * pixels + x] < 60)
{
count++;
}
}
}
/* at end of area, if count >= 3%, area is not fully of the desired color
* so we must go to next buffer */
if ((count * 100) / (pixels * lines) < 3)
{
found = 1;
DBG (DBG_data,
"gl843_search_strip: strip found backward during pass %d \n",
pass);
}
else
{
DBG (DBG_data,
"gl843_search_strip: pixels=%d, count=%d (%d%%)\n",
pixels, count, (100 * count) / pixels);
}
}
pass++;
}
free (data);
if (found)
{
status = SANE_STATUS_GOOD;
DBG (DBG_info, "gl843_search_strip: %s strip found\n",
black ? "black" : "white");
}
else
{
status = SANE_STATUS_UNSUPPORTED;
DBG (DBG_info, "gl843_search_strip: %s strip not found\n",
black ? "black" : "white");
}
DBG (DBG_proc, "gl843_search_strip: completed\n");
return status;
}
/**
* Send shading calibration data. The buffer is considered to always hold values
* for all the channels.
*/
#ifndef UNIT_TESTING
static
#endif
SANE_Status
gl843_send_shading_data (Genesys_Device * dev, uint8_t * data, int size)
{
SANE_Status status;
uint32_t final_size, length, i;
uint8_t *final_data;
uint8_t *buffer;
int count,offset;
unsigned int tgtime;
unsigned int cksel;
Genesys_Register_Set *r;
uint16_t dpiset, strpixel, endpixel, startx, factor;
DBGSTART;
offset=0;
length=size;
r = sanei_genesys_get_address (dev->reg, REG01);
if(r->value & REG01_SHDAREA)
{
/* recompute STRPIXEL used shading calibration so we can
* compute offset within data for SHDAREA case */
r = sanei_genesys_get_address (dev->reg, REG18);
cksel= (r->value & REG18_CKSEL)+1;
sanei_genesys_get_double(dev->reg,REG_DPISET,&strpixel);
tgtime=1;
sanei_genesys_get_double(dev->reg,REG_DPISET,&dpiset);
factor=dev->sensor.optical_res/sanei_genesys_compute_dpihw(dev,dpiset);
if (dev->model->ccd_type == CCD_G4050 && dpiset>2400)
{
tgtime=2;
}
/* start coordinate in optical dpi coordinates */
startx = ((dev->sensor.dummy_pixel * tgtime)/cksel)/factor;
/* current scan coordinates */
sanei_genesys_get_double(dev->reg,REG_STRPIXEL,&strpixel);
sanei_genesys_get_double(dev->reg,REG_ENDPIXEL,&endpixel);
strpixel*=tgtime;
endpixel*=tgtime;
/* 16 bit words, 2 words per color, 3 color channels */
offset=(strpixel-startx)*2*2*3;
length=(endpixel-strpixel)*2*2*3;
DBG (DBG_info, "%s: STRPIXEL=%d, ENDPIXEL=%d, startx=%d\n", __func__, strpixel, endpixel, startx);
}
/* compute and allocate size for final data */
final_size = ((length+251) / 252) * 256;
DBG (DBG_io, "%s: final shading size=%04x (length=%d)\n", __func__, final_size, length);
final_data = (uint8_t *) malloc (final_size);
if(final_data==NULL)
{
DBG (DBG_error, "%s: failed to allocate memory for shading data\n", __func__);
return SANE_STATUS_NO_MEM;
}
memset(final_data,0x00,final_size);
/* copy regular shading data to the expected layout */
buffer = final_data;
count = 0;
/* loop over calibration data */
for (i = 0; i < length; i++)
{
buffer[count] = data[offset+i];
count++;
if ((count % (256*2)) == (252*2))
{
count += 4*2;
}
}
/* send data */
status = sanei_genesys_set_buffer_address (dev, 0);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error, "%s: failed to set buffer address: %s\n", __func__, sane_strstatus (status));
free(final_data);
return status;
}
status = dev->model->cmd_set->bulk_write_data (dev, 0x3c, final_data, count);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error, "%s: failed to send shading table: %s\n", __func__, sane_strstatus (status));
}
free(final_data);
DBGCOMPLETED;
return status;
}
/** the gl843 command set */
static Genesys_Command_Set gl843_cmd_set = {
"gl843-generic", /* the name of this set */
gl843_init,
gl843_init_regs_for_warmup,
gl843_init_regs_for_coarse_calibration,
gl843_init_regs_for_shading,
gl843_init_regs_for_scan,
gl843_get_filter_bit,
gl843_get_lineart_bit,
gl843_get_bitset_bit,
gl843_get_gain4_bit,
gl843_get_fast_feed_bit,
gl843_test_buffer_empty_bit,
gl843_test_motor_flag_bit,
gl843_bulk_full_size,
gl843_set_fe,
gl843_set_powersaving,
gl843_save_power,
gl843_set_motor_power,
gl843_set_lamp_power,
gl843_begin_scan,
gl843_end_scan,
gl843_send_gamma_table,
gl843_search_start_position,
gl843_offset_calibration,
gl843_coarse_gain_calibration,
gl843_led_calibration,
gl843_slow_back_home,
NULL,
sanei_genesys_bulk_write_register,
gl843_bulk_write_data,
gl843_bulk_read_data,
gl843_update_hardware_sensors,
gl843_load_document,
gl843_detect_document_end,
gl843_eject_document,
gl843_search_strip,
sanei_genesys_is_compatible_calibration,
gl843_move_to_ta,
gl843_send_shading_data,
gl843_calculate_current_setup,
gl843_boot,
NULL
};
SANE_Status
sanei_gl843_init_cmd_set (Genesys_Device * dev)
{
dev->model->cmd_set = &gl843_cmd_set;
return SANE_STATUS_GOOD;
}
/* vim: set sw=2 cino=>2se-1sn-1s{s^-1st0(0u0 smarttab expandtab: */
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik