sane-project-backends/doc/sane-s9036.man

72 wiersze
2.1 KiB
Groff

.TH sane-s9036 5 "24 Jun 2000" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
.IX sane-s9036
.SH NAME
sane-s9036 \- SANE backend for Siemens 9036 flatbed scanners
.SH DESCRIPTION
The
.B sane-s9036
library implements a SANE (Scanner Access Now Easy) backend that
provides access to Siemens 9036 flatbed scanners.
.SH "DEVICE NAMES"
This backend expects device names of the form:
.PP
.RS
.I special
.RE
.PP
Where
.I special
is the path-name for the special device that corresponds to a
SCSI scanner. The special device name must be a generic SCSI device or a
symlink to such a device. The program
.IR sane-find-scanner
helps to find out the correct device. Under Linux, such a device name
could be
.I /dev/sga
or
.IR /dev/sge ,
for example. See sane-scsi(5) for details.
.SH FILES
.TP
.I @CONFIGDIR@/s9036.conf
The backend configuration file (see also description of
.B SANE_CONFIG_DIR
below).
.TP
.I @LIBDIR@/libsane-s9036.a
The static library implementing this backend.
.TP
.I @LIBDIR@/libsane-s9036.so
The shared library implementing this backend (present on systems that
support dynamic loading).
.SH ENVIRONMENT
.TP
.B SANE_CONFIG_DIR
This environment variable specifies the list of directories that may
contain the configuration file. Under UNIX, the directories are
separated by a colon (`:'), under OS/2, they are separated by a
semi-colon (`;'). If this variable is not set, the configuration file
is searched in two default directories: first, the current working
directory (".") and then in @CONFIGDIR@. If the value of the
environment variable ends with the directory separator character, then
the default directories are searched after the explicitly specified
directories. For example, setting
.B SANE_CONFIG_DIR
to "/tmp/config:" would result in directories "tmp/config", ".", and
"@CONFIGDIR@" being searched (in this order).
.TP
.B SANE_DEBUG_S9036
If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend. Higher
debug levels increase the verbosity of the output.
Example:
export SANE_DEBUG_S9036=4
.SH "SEE ALSO"
sane(7), sane\-scsi(5)
.SH AUTHOR
Ingo Schneider