kopia lustrzana https://gitlab.com/sane-project/backends
96 wiersze
2.4 KiB
Groff
96 wiersze
2.4 KiB
Groff
.TH sane\-sm3840 5 "11 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
|
|
.IX sane\-sm3840
|
|
.SH NAME
|
|
sane\-sm3840 \- SANE backend for Microtek scanners with SCAN08 USB chip
|
|
.SH DESCRIPTION
|
|
The
|
|
.B sane\-sm3840
|
|
library implements a SANE (Scanner Access Now Easy) backend that
|
|
provides access to some Microtek scanners with the SCAN08
|
|
USB chip.
|
|
.PP
|
|
There exist backends for Microtek scanners with SCSI command set.
|
|
Refer to sane\-microtek(5) and sane\-microtek2(5) for details.
|
|
.PP
|
|
There also exists a Microtek 3600 series driver, see sane\-sm3600(5) for
|
|
details.
|
|
.PP
|
|
At present, the following
|
|
scanners are known positively to work with this backend:
|
|
.PP
|
|
.RS
|
|
.ft CR
|
|
.nf
|
|
Vendor Product ID: Remark:
|
|
-------- -------------- -----------
|
|
Microtek ScanMaker 3840 All modes OK
|
|
Microtek ScanMaker 4800 All modes OK
|
|
.fi
|
|
.ft R
|
|
.RE
|
|
.PP
|
|
If you own a Microtek scanner with the SCAN08 chip other than the ones
|
|
listed above, it may or may not work with SANE. Feel free to contact the
|
|
backend author (earle@ziplabel.com) to report results with scanners not
|
|
on the list.
|
|
|
|
|
|
.SH "FRONTEND OPTIONS"
|
|
.PP
|
|
The following options are supported by the sm3840-driver:
|
|
.PP
|
|
.B \-\-mode color|gray|lineart|halftone
|
|
.br
|
|
Color or grayscale mode.
|
|
|
|
.B \-\-resolution 150|300|600|1200
|
|
.br
|
|
Pixels per inch for scans.
|
|
|
|
.B \-\-depth 8|16
|
|
.br
|
|
Note that the least significant bits of 16bpp mode may be noise.
|
|
|
|
.B \-\-brightness 1..4096
|
|
.br
|
|
Higher numbers increase brightness of returned image.
|
|
|
|
.B \-\-contrast 0.1..9.9
|
|
.br
|
|
Larger numbers decrease contrast of returned image.
|
|
|
|
.B \-\-lamp\-timeout 1..15
|
|
.br
|
|
Time in minutes until the lamp is turned off after a scan.
|
|
|
|
.SH CONFIGURATION
|
|
This backend does not support a configuration file right now.
|
|
|
|
.SH FILES
|
|
.TP
|
|
.I @LIBDIR@/libsane\-sm3840.a
|
|
The static library implementing this backend.
|
|
.TP
|
|
.I @LIBDIR@/libsane\-sm3840.so
|
|
The shared library implementing this backend (present on systems that
|
|
support dynamic loading).
|
|
|
|
|
|
.SH ENVIRONMENT
|
|
.TP
|
|
.B SANE_DEBUG_SM3840
|
|
If the library was compiled with debug support enabled, this
|
|
environment variable controls the debug level for this backend. E.g.,
|
|
a value of 128 requests all debug output to be printed. Smaller
|
|
levels reduce verbosity. To see error messages on stderr set
|
|
SANE_DEBUG_SM3840 to 1.
|
|
|
|
.SH "SEE ALSO"
|
|
sane\-microtek2(5), sane\-sm3600(5), http://www.ziplabel.com/sm3840
|
|
|
|
.SH AUTHOR
|
|
.br
|
|
Earle F. Philhower III (earle@ziplabel.com)
|
|
.br
|
|
|