sane-project-backends/ChangeLog

2011-11-10 Chris Bagwell <chris at cnpbagwell dot com>
	* include/sane/sanei_thread.h, sanei/sanei_thread.c:
	Make SANE_Pid map to pthread_t to be compilable
	on platforms where pthread_t is not a integer;
	namely mingw.
	* configure, configure.in, include/sane/config.h.in,
	lib/Makefile.am, lib/Makefile.in, lib/sleep.c: Add
	a sleep() replacement function; mostly for mingw.
	* backend/epson2-ops.c, backend/epson2.c, umax_pp_low.c:
	Revert some broken sleep()->usleep() conversions.

2011-11-09 Chris Bagwell <chris at cnpbagwell dot com>
	* configure, configure.in, acinclude.m4:
	Convert enable_dynamic to "auto" behavior. Previous
	attempt was resulting in it always defaulting to
	"yes" and user had to use --disable-dynamic on
	platforms that couldn't support it.
	* backend/epson2-ops.c, backend/epson2.c, backend/epson2.h:
	minor portability changes to epson2.  #ifdef some optional
	headers and use usleep() instead of sleep(). Switch to
	sanei_udb_set_noblock().

2011-11-08 Chris Bagwell <chris at cnpbagwell dot com>
	* backend/Makefile.*: Finish preload linking fix.
	dll.c was being linked in with convienence library.
	If it needs to have two behaviors then we need to
	create two libraries.  Now preloading is working in
	libsane.so again and disabled in libsane-dll.so.
	* configure.in, configure, README, */Makefile.*:
	Update README to describe use of BACKENDS and
	PRELOADABLE_BACKENDS to limit backend compiles.
	Also, mark those in configure.in as variables so
	they show up in "configure --help".
	Add back the useful --disable-dynamic and
	--disable-preload that appear to have been removed
	at some point but are documented in README.
	* README.windows: Update info to include mingw
	references.

2011-11-07 Chris Bagwell <chris at cnpbagwell dot com>
	* ltmain.sh: Disable sane's soname libtool hack for
	mingw platform so that DLL's will be created for
	each backin built; just like on unix platforms.
	* backend/Makefile.*: Add missing sanei_magic.lo to
	libsane backend.
	* sanei/sanei_tcp.c sanei/sanei_udp.c include/sane/sanei_udp.h:
	Add WSAStartup()/WSACleanup() calls on mingw to get ws2_32
	working. Make util function to set sockets to nonblocking
	and make work in unix and mingw platforms.

2011-11-06 Chris Bagwell <chris at cnpbagwell dot com>
	* INSTALL, Makefile.am, */Makefile.in, compile, config.guess,
	config.sub, configure, depcomp, include/sane/config.h.in,
	install-sh, ltmain.sh, libtool.m4, ltversion.m4, missing,
	mkinstalldirs: Update files using autoconf 2.68 and libtool 2.4.
	* configure.in, frontend/scanimage.c, include/sane/sanei_tcp.h,
	include/sane/sanei_udp.h, lib/inet_ntop.c, lib/inet_pton.c,
	sanei/sanei_tcp.c, sanei/sanei_udp.c, tools/sane-find-scanner.c:
	Add check for winsock2. Add ws2_32 library when found. Look
	for getuid and getpass since not on mingw.
	* lib/sigprocmask.c: Comment out logic on windows for now since
	it doesn't work. At least it will compile.
	* lib/syslog.c: Add a replacement syslog for at least mingw.
	* testsuite/Makefile.*: Use $(EXEEXT) so that scanimage can
	be ran on windows.
	* backend/Makefile.*, backend/dll.c: Modify dll backend
	so that libsane-dll does not reference preloaded backends
	symbols since its not linking them in.  Only libsane
	references preloaded backend symbols and also links them
	in now.

2011-11-05 Chris Bagwell <chris at cnpbagwell dot com>
	* lib/vsyslog.c, frontend/scanimage.c, include/sane/sanei_tcp.h
	include/sane/sanei_udp.h, lib/inet_ntop.c, lib/inet_pton.c,
	sanei/sanie_init_debug.c, sanei/sanei_scsi.c, sanei/sanei_tcp.c,
	sanei_udp.c, sanei_usb.c: mingw32 compile fixes. Mostly its
	not including header files that windows doesn't have and
	add winsock.h as needed.  Also, do not use signals windows
	doesn't have as well.

2011-11-02 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys_*.[ch] backend/Makefile.am backend/Makefile.in:
	genesys_gl841.h creation and genesys backend code cleanup

2011-11-01 m. allan noah <kitno455 at gmail dot com>
	* backend/canon_dr.[ch]: backend v39
	- DR-2580C pads the backside of duplex scans

2011-11-01 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys_gl124.c backend/genesys_gl646.c
	backend/genesys_gl841.c backend/genesys_gl843.c backend/genesys_gl847.c
	backend/genesys_low.c backend/genesys_low.h: do <sys/types.h> include
	in a clean way

2011-10-30 Mattias Ellert <mattias.ellert@fysast.uu.se>
	* backend/kvs40xx.h: Use portable endian macro from config.h
	* backend/kodak.c: Use more precise path to internal headers
	* backend/canon630u.c, backend/genesys_gl124.c,
	  backend/genesys_gl646.c, backend/genesys_gl841.c,
	  backend/genesys_gl843.c, backend/genesys_gl847.c,
	  backend/genesys_low.c, backend/hp3900_rts8822.c,
	  backend/rts88xx_lib.c, backend/xerox_mfp.c, sanei/sanei_pio.c:
	  Include <sys/types.h> for definition of u_long on MacOS X
	* po/sv.po: Update Swedish translation

2011-10-21 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys.c backend/genesys.h backend/genesys_devices.c
	backend/genesys_gl*.c backend/genesys_gl843.h
	backend/genesys_low.[ch], doc/sane.man doc/sane-genesys.man
	doc/descriptions/genesys.desc:
	1200 and 2400 dpi support for G4010/G4050

2011-10-19 Alex Belkin <abc at telekom.ru>
	* backend/xerox_mfp.conf.in doc/descriptions/xerox_mfp.desc: usb id
	for Samsung CLX 3185, reported by John Dignum.

2011-10-01 Alex Belkin <abc at telekom.ru>
	* backend/xerox_mfp.conf.in doc/descriptions/xerox_mfp.desc: usb id
	for Samsung SCX-4828FN or SCX-4x28 Series, reported by Patrice
	Levesque.

2011-09-16 Nils Philippsen <nils@redhat.com>
	* doc/sane-hpljm1005.man doc/sane-p5.man: use groff escape sequences in
	man pages
	* AUTHORS NEWS doc/descriptions.txt doc/*/*.CHANGES
	doc/plustek/Plustek-*.txt doc/u12/U12.*
	doc/umax/sane-umax-parport-doc.html: encode to UTF-8
	* tools/sane-config.in: use pkg-config
	* doc/descriptions/epson2.desc backend/epson_usb.c: add USB id for Epson
	Stylus SX125

2011-09-07 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys_devices.c backend/genesys_low.h
	backend/genesys_gl124.c: fix button mapping for LiDE 210

2011-08-25 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys_gl646.c backend/genesys_low.c backend/genesys_low.h
	backend/genesys.c: add a no move during shading calibratiob flag, and
	use it for MD5345

2011-08-23 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys_gl847.c backend/genesys_low.c backend/genesys_low.h
	backend/genesys.c backend/genesys_gl124.c backend/genesys_gl843.c:
	make sure to use the fatest speed when parking, use lowest sensor dpi
	as default resolution

2011-08-22 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys*.[ch]: enable calibration for G4050/G4010 and
	minor code refactors

2011-08-05 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys.c backend/genesys_low.c backend/genesys_conv.c:
	fixed generic calibration cache for CCD case and when yres is higher
	than sensor's maximum one. Fixed lineart data enlarging when yres is
	higher than xres.

2011-07-31 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys_gl646.c backend/genesys_gl841.c
	backend/genesys_gl843.c backend/genesys_gl847.c backend/genesys_gl124.c
	backend/genesys_low.[ch]: is_compatible cache refactor for gl843,
	gl847 and gl124

2011-07-31 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys_gl124.[ch] backend/genesys_gl843.[ch]:
	use sanei_genesys_compute_dpihw instead of specific function.

2011-07-15 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys_devices.c backend/genesys_gl646.c
	backend/genesys_gl847.c: re-tune scan area of MD5345/MD6228.
	parking function clean up.

2011-07-15 St<53>phane Voltz <stef.dev@free.fr>
	* backend/lexmark.c backend/lexmark_low.c: increase tolerance when
	detecting the 'home' dot.

2011-07-07 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys.c: fixed incorrect image height for sheetfed
	scanners

2011-07-07 m. allan noah <kitno455 at gmail dot com>
	* po/pt.po: updated translation from cncsolutions.com.br

2011-07-06 m. allan noah <kitno455 at gmail dot com>
	* backend/canon_dr.[ch]: backend version 38
	- initial support for DR-5020
	- use ppl_mod instead of Bpl_mod, apply to all modes
	- invert logic of read_panel tracking
	- add ability to disable read_panel()
	- automatically disable read/send_panel if unsupported
	* doc/descriptions/canon_dr.desc: status of DR-5020

2011-07-06 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys_low.h backend/genesys_gl847.c backend/genesys.c 
	backend/genesys_gl124.c backend/genesys_gl843.c backend/genesys_gl646.c
	backend/genesys_gl841.c: improve 4800 dpi quality for LiDE 200 by
	increasing the number of lines scan for shading

2011-07-05 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys_low.h backend/genesys_gl847.c backend/genesys_devices.c
	backend/genesys.c backend/genesys_gl124.c backend/genesys_gl843.c
	backend/genesys_gl646.c backend/genesys_gl841.c: make 4800 pdi work
	for Lide200. Calibration cache file leak fix.

2011-06-30 Olaf Meeuwissen <olaf.meeuwissen@avasys.jp>
	* frontend/scanimage.c: plug a memory leak in batch mode.

2011-06-24 Julien Blache <jb@jblache.org>
	* tools/sane-desc.c: add a wildcard rule for Epson SCSI scanners
	with a model string beginning with "SCANNER". Idea from Olaf
	Meeuwissen.

2011-06-21 Julien Blache <jb@jblache.org>
	* doc/descriptions/epson2.desc: added SCSI IDs for the GT-10000+,
	reported by Simon Becherer.

2011-06-16 Alex Belkin <abc at telekom.ru>
	* backend/xerox_mfp.conf.in doc/descriptions/xerox_mfp.desc: usb id
	for Samsung CLX-216x Series, tested with CLX-2160, reported by Malte
	Starostik <malte@malte.homeip.net>

2011-06-15 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys.c backend/genesys_gl847.c: lineart fix

2011-06-13 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys_devices.c backend/genesys_gl646.c 
	backend/genesys_gl646.h doc/descriptions/genesys.desc
	doc/sane-genesys.man: add full HP2400 support thanks a patch from
	Alexey Osipov <simba@lerlan.ru>

2011-06-13 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys*.[ch] : rework of gl847 to reach 2400 dpi for 
	LiDE 100 and 4800 dpi for LiDE 200

2011-06-10 St<53>phane Voltz <stef.dev@free.fr>
	* backend/lexmark_models.c: fix missing motor initialization

2011-06-07 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys.c backend/genesys.h backend/genesys_conv.c:
	add blank page skipping and rotation detection options

2011-06-06 m. allan noah <kitno455 at gmail dot com>
	* docs/*kvs40xx*, backend/kvs40xx*: New Panasonic KV-S40xx/70xx
	backend, originally by Panasonic Russia.
	* acinclude.m4, */Makefile.am, configure*: build new kvs40xx backend
	* po/POTFILES: add kvs* backends
	* po/.gitignore: ignore sane-backends.pot
	* include/sane/sanei_magic.h, sanei/sanei_magic.c:
	add new blank detection and rotation detection routines
	* backend/kvs1025*, backend/Makefile*: add support for sanei_magic

2011-06-02 Julien Blache <jb@jblache.org>
	* tools/sane-desc.c: add udev+acl output mode, udev rules using ACLs
	for the scanner group instead of making the device root:scanner 0664.
	This is designed to help with MFPs and play nice with ConsoleKit.

2011-04-20 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys_low.c backend/genesys_devices.c
	backend/genesys.conf.in: add Xerox 2400 onetouch model and improve
	big endian handling

2011-03-19 Julien Blache <jb@jblache.org>
	* tools/sane-desc.c: move away from using power/level for disabling
	USB autosuspend/power management and use power/control if available.

2011-03-18 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys_low.c backend/genesys.c : rewrite big endian fixes 
	for gl847/gl124 based scanners. Improve calibration cache file handling.

2011-03-17 St<53>phane Voltz <stef.dev@free.fr>
	* backend/genesys_low.c: big endian fixes for gl847/gl124 based 
	scanners. Patch by Olaf Zimmermann <oez@pt.lu> .

2011-03-15 St<53>phane Voltz <stef.dev@free.fr>
	* backend/Makefile.in backend/canon_dr.[ch]: fixes to allow full
	static build under cygwin

2011-03-12 Troy Rollo <sane@troy.rollo.name>
	* backend/hp3500.c: Remove interdependency between contrast and
	  brightness.

2011-03-12 Julien Blache <jb@jblache.org>
	* doc/scanimage.man: batch-start defaults to 1 if not specified,
	  not 0. Reported by Jakub Wilk <jwilk@debian.org>.

2011-03-12 Troy Rollo <sane@troy.rollo.name>
	* backend/hp3500.c: Add grayscale and line art scanning. Add contrast
	  and brightness controls which influence the calibration data provided
	  to the scanner.

2011-03-06 Ilia Sotnikov <hostcc@gmail.com>
	* backend/hp5590.c, backend/hp5590_cmds.{c,h}: in ADF modes the device can
	  scan up to 14", which is usually bigger than what scanner reports back
	  during initialization
	* backend/hp5590.c, backend/hp5590_cmds.{c,h}, backend/hp5590_low.{c,h}:
	  fixed detection of HP4500 devices (tested) and HP5550 (untested) - these
	  devices need no reading USB-in-USB acknowledgement after each command. To
	  achieve that, proto_flags are passed down to low-level functions. These
	  flags are taken from device descriptions
	* backend/hp5590_low.{c,h}: fixed up get_status command - index should
	  be 0x00, not 0x20
	* backend/hp5590.c: bump up the backend version

2011-03-04 Julien Blache <jb@jblache.org>
	* frontend/saned.c: define PATH_MAX if needed, fixes build on
	HURD. Patch from Pino Toscano <toscano.pino@tiscali.it>.

2011-02-16 Julien Blache <jb@jblache.org>
	* backend/v4l.c, backend/v4l.h: fix build with libv4l 0.8.3+.

2011-02-13 m. allan noah <kitno455 at gmail dot com>
	* doc/releases.txt: minor updates

Older entries can be found in ChangeLog-1.0.22.