kopia lustrzana https://gitlab.com/sane-project/backends
908 wiersze
28 KiB
Plaintext
908 wiersze
28 KiB
Plaintext
CHANGES for the SANE Mustek backend
|
||
|
||
2002-10-11
|
||
* Released Mustek backend 1.0-128
|
||
|
||
2002-10-10
|
||
* Fixed lamp off time (60 minutes) for the 1200 A3 Pro.
|
||
|
||
2002-07-30
|
||
* Released Mustek backend 1.0-127.
|
||
|
||
2002-07-30
|
||
* Fixed some warnings.
|
||
|
||
2002-07-07
|
||
* Released Mustek backend 1.0-126.
|
||
|
||
2002-07-07
|
||
* Increased width and height of Paragon 800 and 600.
|
||
|
||
2002-06-07
|
||
* Released Mustek backend 1.0-125.
|
||
|
||
2002-06-07
|
||
* Fixed some comments.
|
||
* Use FORCE_GAMMA for Paragon 6000SP as 2.x versions otherwise produce
|
||
solid black images.
|
||
* Used my own address instead of sane-devel for bug reports.
|
||
|
||
2002-05-31
|
||
* Explicitely set some arrays to 0.
|
||
|
||
2002-05-28
|
||
* Released Mustek backend 1.0-124.
|
||
|
||
2002-05-28
|
||
* Set X minimum value to 0 for Paragon 6000SP.
|
||
|
||
2002-04-24:
|
||
* Released Mustek backend 1.0-122.
|
||
|
||
2002-04-24:
|
||
* Undef MIN and MAX if they are defined in mustek.h to avoid warnings.
|
||
|
||
2002-04-22:
|
||
* Fixed debug output in sane_control_option and sane_get_device_descriptor.
|
||
|
||
2002-04-10:
|
||
* Released Mustek backend 1.0-121.
|
||
|
||
2002-04-10:
|
||
* Set freed variables to 0 at sane_exit.
|
||
* Coding-style fixed.
|
||
|
||
2002-04-06:
|
||
* Released Mustek backend 1.0-120.
|
||
|
||
2002-04-05:
|
||
* For 3-pass scanners use area_wait_ready and inquiry_wait_ready. The first
|
||
wait doesn't seem to be enough for some scanners.
|
||
|
||
2002-03-20:
|
||
* Released Mustek backend 1.0-119.
|
||
|
||
2002-03-20:
|
||
* Fix halftone pattern handling. The buffer was way too small.
|
||
|
||
2002-03-19:
|
||
* Option 0 has an empty name.
|
||
|
||
2002-03-18:
|
||
* Better debug output for dev_cmd.
|
||
* Set size for group options to 0.
|
||
* Set size of halftone pattern to non 0.
|
||
|
||
2002-02-14:
|
||
* Fixed some problems with wrong formats in DBG statements.
|
||
|
||
2002-01-23:
|
||
* Fixed undefined operation warnings.
|
||
|
||
2002-01-20:
|
||
* Released Mustek backend 1.0-118.
|
||
|
||
2002-01-20
|
||
* Changes for 1200 Pro: Removed debug code. Calibration is done in
|
||
every mode. Calibration is on by default. Added some
|
||
scsi_sense_wait_ready commands to be sure.
|
||
|
||
2002-01-16
|
||
* Changed option names to use only "-" not "_".
|
||
|
||
2002-01-10
|
||
* OPT_CONTRAST_R is red, not blue.
|
||
|
||
2002-01-07
|
||
* Released Mustek backend 1.0-117.
|
||
|
||
2001-12-29
|
||
* Send start_stop_scan for Pro even if scan wasn't cancelled but less
|
||
data than expected was send (e.g. scanimage -T).
|
||
|
||
2001-12-22
|
||
* Added Trust Imagery 1200 to man page and .desc.
|
||
|
||
2001-12-15
|
||
* Released Mustek backend 1.0-116.
|
||
|
||
2001-12-11
|
||
* Fixed possible segfault in sane_control_option.
|
||
* Added debug output of SCSI commands in dev_cmd and dev_read_req_enter.
|
||
|
||
2001-11-29
|
||
* Released Mustek backend 1.0-115.
|
||
|
||
2001-11-29
|
||
* Removed empty test for pro models.
|
||
* Added check for TL_X > BR_X or TL_Y > BR_Y.
|
||
|
||
2001-11-22
|
||
* Released Mustek backend 1.0-114.
|
||
|
||
2001-11-22
|
||
* Added OS/2 compatibility fixes from "Franz Bakan" <fbakan@gmx.net>.
|
||
|
||
2001-11-18
|
||
* The Primax Compact 4800 seems to bes also supported. Added .desc and
|
||
manpage entries.
|
||
|
||
2001-09-10
|
||
* Released Mustek backend 1.0-113.
|
||
|
||
2001-09-10
|
||
* Fixed bug in gamma correction code that broke at least custom gamma
|
||
for the Paragon 12000SP.
|
||
|
||
2001-08-26
|
||
* Released Mustek backend 1.0-112.
|
||
|
||
2001-08-10
|
||
* Don't close fds[1] in case of OS/2.
|
||
|
||
2001-08-01
|
||
|
||
* Send stop_scan only for ScanExpress scanners when the scan
|
||
wasn't cancelled.
|
||
|
||
2001-07-18
|
||
* Released Mustek backend 1.0-111.
|
||
|
||
2001-07-18
|
||
|
||
* Added warning about Aashima (Trust) scanners.
|
||
* Only call stop_scan if Scan was cancelled for Paragon scanners.
|
||
|
||
2001-07-15
|
||
|
||
* Added message in reader_process that's printed when the kernel SCSI
|
||
buffer is too small for the selected buffer size.
|
||
|
||
2001-07-11
|
||
* Released Mustek backend 1.0-110.
|
||
|
||
2001-07-10
|
||
* Added debug output for the total amount of data transfered to the
|
||
frontend.
|
||
* Fixed bug in fix_line_distance_block which lead to too much data
|
||
transferred to sane_read.
|
||
|
||
2001-07-09
|
||
* Released Mustek backend 1.0-109.
|
||
|
||
2001-07-09
|
||
* Fixed (hopefully) problem with black images (Paragon 6000 SP).
|
||
|
||
2001-07-08
|
||
* Fixed problem with double buffering/SCSI command queuing and
|
||
Linux 2.4.x. Thaks to Abel Deuring for his help.
|
||
* Added option to disable backtracking
|
||
|
||
2001-07-07
|
||
* Released Mustek backend 1.0-108.
|
||
|
||
2001-07-07
|
||
* added option to disable double-buffering
|
||
* don't set any options by default in mustek.conf
|
||
* updated manpage
|
||
* fixed debug statement in scsi_inquiry_wait_ready
|
||
|
||
2001-05-06
|
||
* Fixed memory leak in sane_get_devices ()
|
||
|
||
2001-04-29
|
||
* Fixed several memory leaks.
|
||
|
||
2001-04-27
|
||
* Released Mustek backend 1.0-107 (in CVS).
|
||
|
||
2001-04-23
|
||
* Add internationalization support (mark all strings that can be translated
|
||
with SANE_I18N()).
|
||
|
||
2001-04-19
|
||
* Don't check for macro VERSION any longer in sane_init. Print out
|
||
PACKAGE_VERSION instead.
|
||
* Update email address and homepage.
|
||
|
||
2001-08-08
|
||
* Released Mustek backend 1.0-106
|
||
|
||
2001-04-08
|
||
* Backend status is "stable" now. Hopefully this doesn't mean that new
|
||
bugs show up now :-)
|
||
|
||
2001-04-01
|
||
* Added detection of the Pro models TA (at least the 1200SP Pro).
|
||
* Added warning about real (not relabeled) Trust scanners.
|
||
|
||
2001-03-31
|
||
* Removed comment about brightness and contrast in the description strings
|
||
because you can't read them anyway in color mode (at least with xsane).
|
||
|
||
2001-03-31
|
||
* Released Mustek backend 1.0-105
|
||
|
||
2001-03-31
|
||
* Removed compilation warning in gamma_correction.
|
||
* Fixed handling of tlx and brx when scanning with ADF (bug found by
|
||
Andreas Rathgeber <rathgeber2000@yahoo.de>).
|
||
* Fixed bug in linedistance correction (ld_block) concerning ADF. With ADF
|
||
the linedistance values are ordered in the other direction.
|
||
* Fixed bug concerning ld correction for the 1200SP 1.00 (frontend hangs).
|
||
Moved the do-nothing ld correction to its own function. With ADF this
|
||
scanner doesn't really work in color mode but that's probably a firmware
|
||
problem.
|
||
|
||
2001-03-18
|
||
* 600 II N: Gamma correction in gray mode now works. Length must be 768
|
||
bytes in gray mode also, cdb size is 6 bytes. Thanks to Jakub Bogusz
|
||
<qboosh@prioris.mini.pw.edu.pl> who found out about that and wrote a
|
||
patch.
|
||
|
||
2001-01-17
|
||
* Released Mustek backend 1.0-104
|
||
|
||
2001-01-17
|
||
* Pro: Do calibration only in Lineart, Gray and Color 24 modes.
|
||
|
||
2001-01-03
|
||
* Added 36 bit color mode for the Paragon Pro scanners.
|
||
|
||
2000-12-31
|
||
* Added function little_endian (from coolscan.c) to check the endianess of
|
||
the current architecture (needed for 16 bit frames).
|
||
* Added option for Gray fast
|
||
* Added option for bit depth (8 and 12 bits for the Pro models)
|
||
* Removed "special" modes from mode option
|
||
* Removed 48 bit options for the SE Plus. This mode seems to use only
|
||
interpolated information (but I may be wrong).
|
||
|
||
2000-12-31
|
||
* Released Mustek backend 1.0-103
|
||
|
||
2000-12-30
|
||
* Implemented calibration (color and gray mode) for the Paragon 1200 Pro.
|
||
It's not perfect and needs lots of tests. It may work for the Paragon
|
||
A3 also but is not tested.
|
||
* SE 12000 SP Plus calibration is now better but not yet perfect.
|
||
|
||
2000-12-27
|
||
* Enabled fast_preview for the Pro scanners (30 dpi).
|
||
* Increased scan width to 8.6" for 1200 Pro.
|
||
|
||
2000-12-26
|
||
* Added calibration for the SE 12000 SP Plus. Doesn't fully work until now
|
||
(images are too dark and colored).
|
||
|
||
2000-12-23
|
||
* Added option for Legal format (because the ScanExpress 12000 SP A4 size
|
||
scanner can't be distinguished from the Paragon 1200 LS Legal size scanner
|
||
by software).
|
||
|
||
2000-12-21
|
||
* Added a few checks for Null-Pointers.
|
||
* Removed old code for SE calibration.
|
||
* Added option "quality calibration" for SE Plus scanners
|
||
|
||
2000-12-21
|
||
* sane-backends 1.0.4 was released (including Mustek backend 1.0.102).
|
||
|
||
2000-12-10
|
||
* Released Mustek backend 1.0-102
|
||
|
||
2000-12-09
|
||
* Fixed wrong comment in encode_resolution
|
||
* Added missing test for return status in sane_start
|
||
* Fixed wrong calculation of tlx and tly for Pro series scanners
|
||
|
||
2000-12-05
|
||
* Released Mustek backend 1.0-101
|
||
|
||
2000-12-05
|
||
* Fixed lamp setting (avoid problems with some SE scanners).
|
||
|
||
2000-12-01
|
||
* Reduced scan area for Paragon 1200 SP PRO (to avoid bumping the scan slider
|
||
at the end).
|
||
* Removed warning for 1200 SP PRO.
|
||
|
||
2000-11-26
|
||
* Released Mustek backend 1.0-100
|
||
|
||
2000-11-26
|
||
* Default for "fast preview" is "false" now because this option doesn't work
|
||
for all SE scanners correctly.
|
||
* Added more debug output for area_and_windows.
|
||
* Added more debug output for set_window.
|
||
* Set minimum tly for 8000SP to 0.
|
||
* Don't use block mode for Paragon 8000 SP scanners because this breaks
|
||
color mode with firmware 2.x.
|
||
|
||
2000-11-19
|
||
* Paragon 6000 SP doesn't use block mode any more. It's a bit faster now.
|
||
* Updated sane-mustek.man concerning buffersize and blocksite.
|
||
|
||
2000-11-17
|
||
* Updated manpage concerning force-wait. Some minor corrections and additions
|
||
* Added option force-wait to mustek.conf and did some minor changes.
|
||
|
||
2000-11-16
|
||
* With option force_wait set, the backend waits also before sending the
|
||
inquiry command. This seems to be necessary for the 600 II N.
|
||
|
||
2000-11-12
|
||
* Use SANE_Int, SANE_Bool, SANE_Word for int wherever this seems to
|
||
be appropriate.
|
||
* Move macros to mustek.h.
|
||
* Code cleanup.
|
||
|
||
2000-11-11
|
||
* OPT_GRAY_PREVIEW is now called OPT_FAST_PREVIEW.
|
||
* For SE scanners use 36/38 dpi color for fast preview.
|
||
* use include "../include/sane/" instead of "sane/"
|
||
* go back to old scheme for SE scanners in color mode (faster scans
|
||
couldn't be reproduced)
|
||
|
||
2000-11-10
|
||
* added more debug output in constrain_value
|
||
|
||
2000-11-05
|
||
* Released backend version 1.0-99.
|
||
|
||
2000-11-05
|
||
* Added support for TAIV for SE 12000 SP. Lamp is turned off while
|
||
scanning (seems to work for firmware >= 2.00)
|
||
* Adjusted transparency adapter support for all ScanExpress scanners.
|
||
The 12000 A3 SP can only do A4 beacuse I don't have the right TA.
|
||
* don't use u_int* types in mustek.h because the definitions for these
|
||
types are not included
|
||
|
||
2000-11-04
|
||
* SE scanners can now scan 75, 100, 150, 200, 250, 300, 400, 500, 600,
|
||
900 and 1200 dpi in color mode (the 1200 dpi models). These are fixed
|
||
resolutions, a resolution >= the wanted resolution is selected. This
|
||
makes preview and some resolutions faster than before (at least for
|
||
some scanners), because lower resolutions can be used.
|
||
* Minimum scan resolution is 60 dpi in gray and lineart and 75 dpi in
|
||
color mode for the SE scanners now.
|
||
|
||
2000-10-29
|
||
* Fixed a bug concerning block LD. Paragon 1 and 2 were exchanged.
|
||
* Paragon 12000SP color mode works now without garbage at the end
|
||
* Fixed Paragon 1200 SP Pro color mode > 600 dpi (rounding problem)
|
||
* Temporarily disabled 48 bit color mode for release
|
||
|
||
2000-10-25
|
||
* Detect support for TA IV (transparency adapter for ScanExpress scanners)
|
||
* TA IV supported now; lamp is turned off at least for SE 1200 SP Plus
|
||
scanners
|
||
* Adjusted scan area for TA: SE 12000SP Plus
|
||
* Simplify enlarge x
|
||
* Set tl-y to 0 for all ScanExpress scanners
|
||
* First attempt to support 48 bits color mode (SE 12000 SP Plus)
|
||
|
||
2000-10-22
|
||
* Detect SE 12000 SP Plus properly
|
||
* Cover sensor only checked for SE models that support this feature
|
||
|
||
2000-10-21
|
||
* Removed MAX_BLOCKSIZE macro (not used anymore).
|
||
|
||
2000-10-03
|
||
* Released backend version 1.0-98.
|
||
|
||
2000-10-03
|
||
* Fixed segmentation fault in sane_init (else statement was missing).
|
||
Thanks to Oliver Rauch who spotted this problem.
|
||
* Re-enabled double buffering.
|
||
|
||
2000-10-02
|
||
* Zero out inquiry memory block before reading inquiry.
|
||
|
||
2000-10-01
|
||
* Fixed fix_line_distance_block.
|
||
* Adjusted Paragon 12000 SP to use block LD correction if necessary.
|
||
* removed LD MFS (wasn't used anyway)
|
||
|
||
2000-09-30
|
||
* Set blockbuffer size to 2 MB for Paragon series II scanners.
|
||
* Fix sane_cancel for Paragon series II scanners
|
||
* Fix speed and grain for Paragon series II scanners
|
||
* Backtracking is used for all scanners (removed option)
|
||
* included stop_scan into do_stop
|
||
* better integration of the wait_ready functions
|
||
* check that size of buffer <= size of block buffer
|
||
|
||
2000-09-24
|
||
* Added more debug output in sane_get_option_descriptor.
|
||
* Added more debug output in sane_control_option.
|
||
* Added check for devicename and handle != 0 in sane_open
|
||
* Added check for handle != 0 in sane_get_option_descriptor
|
||
* Added check for handle != 0 in sane_get_parameters
|
||
* Added check for handle and val != 0 in sane_control_option
|
||
* Added check for handle != 0 in sane_start
|
||
* Added check for handle, buf and len != 0 in sane_read
|
||
* Added check for handle != 0 in sane_cancel
|
||
* Added check for handle != 0 in sane_set_io_mode
|
||
* Added check for handle != 0 in sane_get_select_fd
|
||
* Output option title in sane_get_option_descriptor if name is null
|
||
|
||
2000-09-24
|
||
* Released backend version 1.0-97.
|
||
|
||
2000-09-24
|
||
* Added RGB brightness and contrast for 3pass scanners
|
||
* Brightness and contrast is +-100% for 3pass scanners now
|
||
|
||
2000-09-23
|
||
* Paragon 12000CX uses pixel unit now.
|
||
* Paragon 6000CX uses pixel unit now (MSF-06000CZ).
|
||
* Option "force backtracking" is enabled by default now
|
||
* Option "scan speed" is set to "fastest" by default now
|
||
* Add option "force-wait" (for mustek.conf). If enabled, wait for scan
|
||
head to return to start position after scan.
|
||
* Make DBG output in sane_control_option() more readable
|
||
* Better error handling and debug output in sane_get_option_descriptor()
|
||
* Changed Halftone handling, removed grain size
|
||
|
||
2000-09-22
|
||
* Paragon 12000SP 1.06 uses LD_NORMAL now.
|
||
|
||
2000-09-19
|
||
* Return sane_status_cancelled in sane_read if last scan was cancelled.
|
||
|
||
2000-09-18
|
||
* Changed speed_code to use values between 1...5 for 3pass scanners.
|
||
I don't know yet if these are correct for the other scanners, too.
|
||
* Don't do a stop scan for 3pass scanners (only when cancelling).
|
||
* Set bit 0 of first byte of area_and_windows for gray + color.
|
||
* Paragon 6000CX uses pixel unit now (MFS-06000CX).
|
||
* Pixel unit for 3pass scanners is now supported
|
||
|
||
2000-09-17
|
||
* changed maximum y range of MFS-800 II SP to 288 mm because of
|
||
a report of scanner touching the end.
|
||
|
||
2000-09-10
|
||
* added some testing (result != null and arg !=0) in sense_handler
|
||
(found by Martin Blasczyk)
|
||
|
||
2000-08-20
|
||
* Paragon series II is also using blockmode now.
|
||
* Removed warning from mustek.c.
|
||
* Fixed (maybe) problem in scsi_sense_wait_ready and added more
|
||
debug output.
|
||
|
||
2000-08-18
|
||
* added new option blocksize to mustek.conf
|
||
* 800 II SP works now in new block mode (get_image_status is needed
|
||
before each block)
|
||
|
||
2000-08-17
|
||
* Removed some warnings from sanei_ab306.c.
|
||
|
||
2000-08-16
|
||
* Fixed some bugs in fix_linedistance_block. Paragon 600 models seem to
|
||
work now. 800 II SP freezes, however.
|
||
* Fixed segmentation fault for the 600 II N in ld correction code.
|
||
|
||
2000-08-15
|
||
* Changed handling of three pass scanners (MUSTEK_FLAG_THREE_PASS instead of
|
||
!MUSTEK_FLAG_SINGLE_PASS).
|
||
* Added flags for Paragon series I and II (MUSTEK_PLAG_PARAGON_1 and
|
||
MUSTEK_PLAG_PARAGON_2).
|
||
* Distinguish between three-pass, Paragon series 1, Paragon series 2,
|
||
ScanExpress, Pro and N type scanners.
|
||
* Added support for scanning the whole image in one block without
|
||
backtracking for the Paragon series II scanners.
|
||
* Added fix_linedistance_block: like linedistance_normal but broken
|
||
up into several SCSI buffers.
|
||
|
||
2000-08-14
|
||
* Changed again linedistance correction for the Paragon 12000 SP 1.11.
|
||
This seems to be a never ending story.
|
||
* Set the minimum dpi value to 30. Some scanners (e.g. the MFS 8000SP
|
||
v 2.04) block the SCSI bus with lower resolutions.
|
||
|
||
2000-08-12
|
||
* Added support for Paragon 1200 SP Pro.
|
||
* Added support for ScanExpress A3 SP.
|
||
* Removed detection for " C12" and " C04" (don't seem to exist).
|
||
* Changed SCSI read request scheme. Now two requests with half of the
|
||
maximum SCSI buffer size are entered. Standard buffer size is 128 kB,
|
||
so the buffer sent to the scanner is 64 kB for all types of scanners.
|
||
* sane_read now reads more than 4096 bytes from pipe (if available).
|
||
|
||
2000-08-12
|
||
* SANE 1.0.3 released (including Mustek backend 1.0.96).
|
||
|
||
2000-07-31
|
||
* Released backend version 1.0-96.
|
||
|
||
2000-07-30
|
||
* Fixed bug concerning inquiry of 3-pass scanners. ASCII values > 127
|
||
weren't interpreted correctly (char instead of unsigned char).
|
||
|
||
2000-07-30
|
||
* Released backend version 1.0-95
|
||
|
||
2000-07-30
|
||
* Removed while {wait ()} loop. Used waitpid() instead. Maybe this cures
|
||
some reported freezes. It's cleaner anyway.
|
||
* Removed dead code.
|
||
|
||
2000-07-28
|
||
* Released backend version 1.0-94
|
||
|
||
2000-07-29
|
||
* Use #include "sane/..." instead of #include <sane/...>.
|
||
|
||
2000-07-27
|
||
* Released backend version 1.0-93
|
||
|
||
2000-07-27
|
||
* removed warnings
|
||
|
||
2000-07-26
|
||
* fixed possible segfault pointer info was not checked for 0 (found by
|
||
Petter Reinholdtsen)
|
||
* Updated comment about Paragon 600 II N linedistance correction in man
|
||
page
|
||
|
||
2000-07-25
|
||
* Fixed color scanning for Paragon 600 II N firmware < 2.00.
|
||
|
||
2000-07-25
|
||
* Released backend version 1.0-92
|
||
|
||
2000-07-24
|
||
* Fixed ADF handling (output was mirrored in x direction). Gray and lineart
|
||
seems to work now. Color and halftone modes look somewhat crazy.
|
||
* Removed comment about lack of testing of ADFs in manpage. They are
|
||
tested to work now with most scanner at least basically.
|
||
* removed braindead test for Pro series concerning gamma table length
|
||
(discovered by Jan-Erik Karlsson).
|
||
|
||
2000-07-22
|
||
* Fixed margin positions of MFS 6000CX and removed warning.
|
||
* Warning is printed with DBG level 0 again.
|
||
|
||
2000-07-18
|
||
* Released backend version 1.0-91
|
||
|
||
2000-07-18
|
||
* Removed again MUSTEK_FLAG_LD_NONE for MFS-08000SP. Maybe the automatical
|
||
detection works now.
|
||
|
||
2000-07-15
|
||
* Released backend version 1.0-90
|
||
|
||
2000-07-15
|
||
* Added MUSTEK_FLAG_LD_NONE for MFS-08000SP and removed warning for
|
||
this scanner. Added TA support. First report for this device from
|
||
Roland Koebler.
|
||
* Changed LD correction system. Some scanners (e.g. the 800 II SP)
|
||
seem to need different LD correction depending on resolution.
|
||
Now with LD_NORMAL max_value is checked and correction is only done
|
||
if it is != 0. Hope this works for all scanners.
|
||
* Moved the comment after the example port entry in mustek.conf to
|
||
the next line. Now this line should work.
|
||
* Updated manpage concerning PP scanners and 600 II N.
|
||
|
||
2000-06-30
|
||
* Released backend version 1.0-89
|
||
|
||
2000-06-30
|
||
* Fixed bug in do_stop. The scan slider didn't return after the scan
|
||
in some situations.
|
||
|
||
2000-06-28
|
||
* Released backend version 1.0-88
|
||
|
||
2000-06-28
|
||
* Changed again linedistance handling for the Paragon 1200SP. This
|
||
time version 1.07 seems to need a special treetment. Even with normal
|
||
linedistance correction the image is corrupted at buffer boundaries
|
||
in color mode. Maybe a firmware bug? Thanks to Michael Prechtl for
|
||
all his tests.
|
||
|
||
2000-06-25
|
||
* added missing newline to mustek.conf
|
||
|
||
2000-06-25
|
||
* Released backend version 1.0-87
|
||
|
||
2000-06-25
|
||
* updated manpage concerning parport and USB scanners
|
||
* added example for 600 II N to mustek.conf
|
||
|
||
2000-06-22
|
||
* fixed debug output bug in fix_linedistance_se (found by Jan-Erik Karlsson)
|
||
|
||
2000-06-21
|
||
* fixed dependancy of mustek.h on sane-backends.h
|
||
|
||
2000-06-19
|
||
* Fixed gamma correction in lineart mode for Paragon 1200 A3
|
||
|
||
2000-06-18
|
||
* Released backend version 1.0-86
|
||
|
||
2000-06-18
|
||
* added enlarging x resolution for Paragon 1200 A3 Pro
|
||
* Paragon 1200 A3 PRO is fully functional now. Thanks to Heinrich Falk, who
|
||
borrowed me this device.
|
||
|
||
2000-06-17
|
||
* added calibration for Paragon 1200 A3 Pro (only dummy, doesn't work yet)
|
||
* adjusted options for Paragon 1200 A3 Pro
|
||
* added lineart support for Paragon 1200 A4 Pro
|
||
* removed support for color lineart and color halftone modes
|
||
* added color support for Paragon 1200 A3 Pro
|
||
* added scsi_wait_sense, this fixed 1200 A3 Pro hangs
|
||
* fixed gamma correction for 1200 A3 Pro. At the moment only 8 bit and
|
||
24 bit per pixel are supported (12/36 are possible in hardware)
|
||
|
||
2000-06-16
|
||
* addded debugging output in sane_control_option
|
||
* added gamma correction for Paragon 1200 A3 Pro (doesn't work correctly yet)
|
||
|
||
2000-06-15
|
||
* removed old config file reading system.
|
||
|
||
2000-06-14
|
||
* Preliminary support for the Mustek Paragon 1200 A3 Pro. Only grayscale
|
||
mode works so far. Missing: Gamma correction and calibration. The scanner
|
||
is locked after each scan.
|
||
|
||
2000-06-12
|
||
* Fixed bug in sane_control_option. option was not checked for negative
|
||
values. Thanks to Jochen Eisinger.
|
||
* Code cleanup and reorganization for inclusion of the Paragon 1200 A3 Pro.
|
||
|
||
2000-06-07
|
||
* Fixed bug in sane_close where the chain of handles got destroyed by
|
||
closing the first device. This bug is in the backend since 3 1/2 years.
|
||
Thanks to Jochen Eisinger for spotting this.
|
||
|
||
2000-06-05
|
||
* Fixed some debug messages in fix_linedistance_se
|
||
|
||
2000-06-04
|
||
* released backend version 1.0-85
|
||
|
||
2000-06-04
|
||
* changed (again) Paragon 12000 SP linedistance handling, now 1.02 uses
|
||
normal LD corrections, all other use none. We'll see, if this works.
|
||
Thanks to Reinhard G<>nzel who helped to debug this.
|
||
* fixed some long lines (>80 chars)
|
||
|
||
2000-06-03
|
||
* released backend version 1.0-84
|
||
|
||
2000-06-03
|
||
* changed line-distance handling, removed ld.max_value magic (didn't work)
|
||
* fixed (maybe) Paragon 12000 SP color stripes problems (v 1.11 and others)
|
||
* simpler linedistance debug output, only for 1-pass Paragon scanners
|
||
|
||
2000-06-02
|
||
* removed code in dev_read_start which was never called (suggestion
|
||
from Jan-Erik Karlsson)
|
||
|
||
2000-05-21
|
||
* added double buffering (trying to copy the scsi buffer to the frontend
|
||
while getting a new one). This probably won't work on all
|
||
platforms and with all SCSI host adapters but in this case performance
|
||
shouldn't be worse than before.
|
||
|
||
2000-05-21
|
||
* released backend version 1.0-83
|
||
|
||
2000-05-21
|
||
* The Mustek Paragon 1200 A3 PRO is now detected. This is only a test
|
||
release. Be carefull and read the PROBLEMS file if you want to
|
||
try this scanner.
|
||
|
||
2000-05-19
|
||
* released backend version 1.0-82
|
||
|
||
2000-05-18
|
||
* set debug level for output of unknown Mustek scanner to 0 (suggestion
|
||
from Thorben Kundinger)
|
||
|
||
2000-05-12
|
||
* fixed bug in distinguishing firmware formats
|
||
* added shrinked image fix to ScanExpress 12000SP models <= v2.0
|
||
|
||
2000-05-08
|
||
* fixed remaining sane_cancel problems (in non_blocking mode)
|
||
* fixed color stripes and segmentation fault for Paragon MFS-12000SP
|
||
1.00 (at least for me)
|
||
* added more debug output to inquiry
|
||
* added possibility to distinguish old and new firmware formats
|
||
* added one more debug level (5)
|
||
* added output of SANE version
|
||
|
||
2000-05-07
|
||
* released backend version 1.0-81
|
||
|
||
2000-05-06
|
||
* added transparency adapter support for the Paragon 600 II CD, 600S,
|
||
800 II SP, 600 II N, ScannExpress 6000SP and 12000SP
|
||
* removed "color lineart" and "color halftone" for all scanners.
|
||
These modes didn't work for any of my scanners.
|
||
* added more debug output for ADF and TA
|
||
* fixed bug when ADF is out of documents
|
||
* Scan source option is only available if TA or ADF is present. For
|
||
SE and N models TA is always available because it can't be detected
|
||
by hardware
|
||
* removed "backtrack", "speed" and "grain" from 600 II N options,
|
||
the scanner doesn't support them
|
||
* updated mustek.desc and mustek.man
|
||
|
||
2000-05-02
|
||
* Reduced scan area for the Paragon MFC-600S because of ugly noises at
|
||
the end of the scan area
|
||
|
||
2000-04-29
|
||
* Adjusted scan area to the Windows driver defaults for ScanExpress
|
||
6000SP; added MUSTEK_FLAG_ENLARGE_X for this scanner
|
||
* Added Warning for scanners that are not (fully) tested
|
||
|
||
2000-04-26
|
||
* changed sane_init to use sanei_config_read () and
|
||
sanei_config_get_string ()
|
||
|
||
2000-04-24
|
||
* released backend version 1.0-80
|
||
|
||
2000-04-23
|
||
* fixed lineart and color scanning >600 dpi for the SE 12000SP
|
||
* added variable debug_level to be faster without debugging in attach ()
|
||
* fixed bug in mustek.conf handling; positional options were applied
|
||
to the first device only
|
||
* added an option to mustek.conf: "buffersize". This overwrites the
|
||
default scan buffer sizes. The unit is kilobytes.
|
||
* adjusted mustek.conf to more reasonable defaults
|
||
* update manpage and mustek.desc to reflect the changes
|
||
|
||
2000-04-22
|
||
* fixed greyscale scanning >600 dpi for the SE 12000SP
|
||
|
||
2000-04-21
|
||
* added more debug output to sane_get_parameters
|
||
|
||
2000-04-20
|
||
* Output of scanning time now works with scanimage, too.
|
||
* Adjusted scan area to the Windows driver defaults for Paragon
|
||
MFS-6000CX
|
||
* Added transparency adapter support for the Paragon MFS-6000CX and
|
||
MFS-12000SP
|
||
|
||
2000-04-19
|
||
* Adjusted scan area to the Windows driver defaults for Paragon
|
||
MFS-12000SP
|
||
|
||
2000-04-17
|
||
* added support for the sanei_scsi_open_extended method with variable
|
||
buffersizes
|
||
* removed support for SCSI queue. Couldn't find improvements
|
||
for any scanner
|
||
|
||
2000-04-16
|
||
* removed "color lineart" and "color halftone" for single pass scanners.
|
||
These modes didn't work for any of my scanners.
|
||
* fixed problems in color mode for the MFS-8000SP (gamma table is now
|
||
uploaded even if not selected)
|
||
* Output "cover open" only for ScanExpress scanners (Paragon scanners
|
||
don't have a cover sensor)
|
||
* Added transparency adapter support for the Paragon MFS-6000SP and
|
||
MFS-12000CX
|
||
* Added output of transfer speed (kb/s)
|
||
* maximum allocated memory for read request can be set by a #define
|
||
* buffer size can be set on a per scanner basis
|
||
* Adjusted scan area to the Windows driver defaults for Paragon
|
||
800 II SP
|
||
* Added quotation marks to inquiry output
|
||
|
||
2000-04-15
|
||
* Adjusted scan area to the Windows driver defaults for Paragon 8000SP,
|
||
ScanExpress 12000SP
|
||
* Fixed scan area settings (TL-X and TL-Y) for transparency adapter (TA)
|
||
* Added TA support for Paragon 8000SP
|
||
|
||
2000-04-13
|
||
* Added more debug output in sane_read and some other functions
|
||
* removed warnings
|
||
|
||
2000-04-12
|
||
* Added more debug output concerning buffer handling
|
||
|
||
2000-04-10
|
||
* Adjusted scan area to the Windows driver defaults for Paragon 12000CX,
|
||
6000SP, 600 II CD, 600 II N
|
||
|
||
2000-04-09
|
||
* released backend version 1.0-79
|
||
|
||
2000-04-08
|
||
* added output of scanning time (debuglevel 2 and higher)
|
||
* removed old code from sane_cancel
|
||
|
||
2000-04-07
|
||
* fixed line-distance correction for the 600 II N
|
||
* rewrite of the 600 II N code
|
||
* documentation update for the 600 II N
|
||
|
||
2000-04-06
|
||
* Rewrite of resolution encoding for 3-pass scanners
|
||
* added more comments
|
||
* some spelling errors corrected
|
||
|
||
2000-04-03
|
||
* output backend and version information
|
||
* fixed resolution encoding for MFS12000cx
|
||
* Changed version system to be compatible to the SANE standard
|
||
(major, minor, build); 0.78 --> 1.0-78
|
||
|
||
2000-04-02
|
||
* released backend version 0.78
|
||
* added MUSTEK_FLAG_DOUBLE_RES for the MFS-12000CX 3-pass scanner,
|
||
resolutions > 600 dpi should work now
|
||
|
||
2000-04-01
|
||
* reduced scan area for Paragon 800 S / II SP
|
||
|
||
2000-03-29
|
||
* released backend version 0.77
|
||
* inquiry is printed in full text at debug level 4
|
||
* more debug level tweaking
|
||
* man page update
|
||
* model name update
|
||
|
||
2000-03-25
|
||
* corrected some spelling errors
|
||
|
||
2000-03-24
|
||
* reduced scanarea for the MSF-6000SP
|
||
* restructured scanner recognition
|
||
|
||
2000-03-18
|
||
* released backend version 0.76
|
||
|
||
2000-03-17
|
||
* removed some compiler warnings
|
||
* changed the sane.model names (e.g. ScanExpress 12000SP instead of
|
||
C06IDW...)
|
||
* added SCSI information output to inquiry
|
||
* adjusted debug levels and debug output
|
||
|
||
2000-03-15
|
||
* fixed typo in man page
|
||
|
||
2000-03-12
|
||
* released backend version 0.75
|
||
* man page update
|
||
* mustek.desc update
|
||
* test for option < 0 in sane_get_option_descriptor (thanks to Oliver Rauch)
|
||
* added do_stop in sane_cancel (don't wait for next read that will
|
||
possibly never happen)
|
||
* fixed firmware version identification for newer ScanExpress models
|
||
(patch from Marco G. Salvagno)
|
||
* probably fixed linedistance correction at high resolutions for
|
||
MFS-1200SP firmware 1.00 and possibly others (patch from Andreas Beck)
|
||
* added check for ADF ready in sane_start (patch from Joerg Anders)
|
||
* Bug fix in the STORE makros (patch from Norbert Mueller)
|
||
|
||
|
||
2000-03-06
|
||
* created mustek.CHANGES file
|
||
* released backend version 0.74
|
||
* added linedistance correction for the 600 II N + documentation updates
|
||
* added detection of newer ScanExpress models ("XC06" instead og " C06")
|
||
* bugfix for 600 II N waiting 60 s before cancelling
|
||
|
||
|
||
Henning Meier-Geinitz <henning@meier-geinitz.de>
|