kopia lustrzana https://gitlab.com/sane-project/backends
60 wiersze
2.1 KiB
Plaintext
60 wiersze
2.1 KiB
Plaintext
SANE and NetBSD
|
|
----------------
|
|
|
|
Building:
|
|
---------
|
|
Don't forget to use GNU make (gmake). E.g. "MAKE=gmake ./configure".
|
|
SANE should compile and install out-of-the-box.
|
|
|
|
SCSI-scanners:
|
|
--------------
|
|
SANE only supports the generic /dev/uk? devices. /dev/ss? won't work. If your
|
|
scanner is detected by the ss driver, disable the driver with the "config"
|
|
utility or compile a new kernel without ss. Set a link /dev/scanner to /dev/uk0
|
|
(or whatever you use) and/or edit your backend's config file
|
|
appropriately. Don't forget to set up permissions to the device file correctly
|
|
for access by a non-root user (read/write). Auto-configuration using the "scsi
|
|
*" lines in the config files doesn't work.
|
|
|
|
Scanners with higher resolutions need bigger SCSI buffers. Therefore, edit
|
|
sanei/sanei_scsi.c and look for these lines:
|
|
|
|
#ifndef MAX_DATA
|
|
# define MAX_DATA (32*1024)
|
|
#endif
|
|
|
|
Increase the buffer size to e.g. 128 * 1024. Recompile.
|
|
|
|
USB-scanners:
|
|
-------------
|
|
|
|
USB-Scanners are supported in principle. Using libusb is recommended.
|
|
|
|
Problems when using libusb:
|
|
|
|
Older kernels may need to be compiled WITHOUT DIAGNOSTIC. Disable it in the
|
|
config file or use a GENERIC kernel without DIAGNOSTIC. If it is, you will get
|
|
errors like "ugenioctl: USB_SET_TIMEOUT, no pipe".
|
|
|
|
When using libusb, make sure, that /dev/ugen* and /dev/usb* devices are
|
|
available. Use /dev/MAKEDEV to create them, if necessary.
|
|
|
|
If you want to use libusb, disable the uscanner driver.
|
|
|
|
Problems with uscanner driver:
|
|
|
|
The uscanner driver also works (tested with the plustek backend). As the
|
|
uscanner driver can't detect the vendor and product ids automatically, it's
|
|
necessary to add the name of the device file to the backends's configuration
|
|
file. Some backends also need the vendor and product id of the scanner.
|
|
|
|
Some backends won't work with the uscanner driver because they need USB
|
|
control messages. Use libusb instead.
|
|
|
|
Parport-scanners:
|
|
-----------------
|
|
I don't have any information about these. Please contact me or the SANE mailing
|
|
list if you succeeded in using one of these.
|
|
|
|
2003-04-24 Henning Meier-Geinitz <henning@meier-geinitz.de>
|