kopia lustrzana https://gitlab.com/sane-project/backends
49 wiersze
1.7 KiB
Plaintext
49 wiersze
1.7 KiB
Plaintext
SANE and NetBSD
|
|
----------------
|
|
|
|
Building:
|
|
---------
|
|
Don't forget to use GNU make (gmake). E.g. "MAKE=gmake ./configure".
|
|
SANE should compile and install out-of-the-box.
|
|
|
|
SCSI-scanners:
|
|
--------------
|
|
If the SCSI host adapter is supported, there are no known problems. Try
|
|
sane-find-scanner to find out the correct device and edit the backend's
|
|
configuration file appropriately or set a link /dev/scanner to the device
|
|
file. Auto-configuration using the "scsi *" lines in the config files
|
|
doesn't work.
|
|
|
|
USB-scanners:
|
|
-------------
|
|
|
|
USB-Scanners are supported in principle. Using libusb is recommended.
|
|
|
|
Problems when using libusb:
|
|
|
|
Older kernels may need to be compiled WITHOUT DIAGNOSTIC. Disable it in the
|
|
config file or use a GENERIC kernel without DIAGNOSTIC. If it is, you will get
|
|
errors like "ugenioctl: USB_SET_TIMEOUT, no pipe".
|
|
|
|
When using libusb, make sure, that /dev/ugen* and /dev/usb* devices are
|
|
available. Use /dev/MAKEDEV to create them, if necessary.
|
|
|
|
If you want to use libusb, disable the uscanner driver.
|
|
|
|
Problems with uscanner driver:
|
|
|
|
The uscanner driver also works (tested with the plustek backend). As the
|
|
uscanner driver can't detect the vendor and product ids automatically, it's
|
|
necessary to add the name of the device file to the backends's configuration
|
|
file. Some backends also need the vendor and product id of the scanner.
|
|
|
|
Some backends won't work with the uscanner driver becasue they need USB
|
|
control messages. Use libusb instead.
|
|
|
|
Parport-scanners:
|
|
-----------------
|
|
I don't have any information about these. Please contact me or the SANE mailing
|
|
list if you succeded in using one of these.
|
|
|
|
2003-04-24 Henning Meier-Geinitz <henning@meier-geinitz.de>
|