2011-06-06 m. allan noah <kitno455 at gmail dot com>
	* docs/*kvs40xx*, backend/kvs40xx*: New Panasonic KV-S40xx/70xx
	backend, originally by Panasonic Russia.
	* acinclude.m4, */Makefile.am, configure*: build new kvs40xx backend
	* po/POTFILES: add kvs* backends
	* po/.gitignore: ignore sane-backends.pot
	* include/sane/sanei_magic.h, sanei/sanei_magic.c:
	add new blank detection and rotation detection routines
	* backend/kvs1025*, backend/Makefile*: add support for sanei_magic

2011-06-02 Julien Blache <jb@jblache.org>
	* tools/sane-desc.c: add udev+acl output mode, udev rules using ACLs
	for the scanner group instead of making the device root:scanner 0664.
	This is designed to help with MFPs and play nice with ConsoleKit.

2011-04-20 Stéphane Voltz <stef.dev@free.fr>
	* backend/genesys_low.c backend/genesys_devices.c
	backend/genesys.conf.in: add Xerox 2400 onetouch model and improve
	big endian handling

2011-03-19 Julien Blache <jb@jblache.org>
	* tools/sane-desc.c: move away from using power/level for disabling
	USB autosuspend/power management and use power/control if available.

2011-03-18 Stéphane Voltz <stef.dev@free.fr>
	* backend/genesys_low.c backend/genesys.c : rewrite big endian fixes 
	for gl847/gl124 based scanners. Improve calibration cache file handling.

2011-03-17 Stéphane Voltz <stef.dev@free.fr>
	* backend/genesys_low.c: big endian fixes for gl847/gl124 based 
	scanners. Patch by Olaf Zimmermann <oez@pt.lu> .

2011-03-15 Stéphane Voltz <stef.dev@free.fr>
	* backend/Makefile.in backend/canon_dr.[ch]: fixes to allow full
	static build under cygwin

2011-03-12 Troy Rollo <sane@troy.rollo.name>
	* backend/hp3500.c: Remove interdependency between contrast and
	  brightness.

2011-03-12 Julien Blache <jb@jblache.org>
	* doc/scanimage.man: batch-start defaults to 1 if not specified,
	  not 0. Reported by Jakub Wilk <jwilk@debian.org>.

2011-03-12 Troy Rollo <sane@troy.rollo.name>
	* backend/hp3500.c: Add grayscale and line art scanning. Add contrast
	  and brightness controls which influence the calibration data provided
	  to the scanner.

2011-03-06 Ilia Sotnikov <hostcc@gmail.com>
	* backend/hp5590.c, backend/hp5590_cmds.{c,h}: in ADF modes the device can
	  scan up to 14", which is usually bigger than what scanner reports back
	  during initialization
	* backend/hp5590.c, backend/hp5590_cmds.{c,h}, backend/hp5590_low.{c,h}:
	  fixed detection of HP4500 devices (tested) and HP5550 (untested) - these
	  devices need no reading USB-in-USB acknowledgement after each command. To
	  achieve that, proto_flags are passed down to low-level functions. These
	  flags are taken from device descriptions
	* backend/hp5590_low.{c,h}: fixed up get_status command - index should
	  be 0x00, not 0x20
	* backend/hp5590.c: bump up the backend version

2011-03-04 Julien Blache <jb@jblache.org>
	* frontend/saned.c: define PATH_MAX if needed, fixes build on
	HURD. Patch from Pino Toscano <toscano.pino@tiscali.it>.

2011-02-16 Julien Blache <jb@jblache.org>
	* backend/v4l.c, backend/v4l.h: fix build with libv4l 0.8.3+.

2011-02-13 m. allan noah <kitno455 at gmail dot com>
	* doc/releases.txt: minor updates

Older entries can be found in ChangeLog-1.0.22.