2002-01-19 Henning Meier-Geinitz * TODO: Removed entries about kill(-1,...), wrong .desc links, sanei documentation, added entries about exit(), and sanei doxygen documentation. * backend/mustek.c doc/mustek/mustek.CHANGES: Fixed some option name issues. * doc/sane-mustek-usb.man: Fixed typo. * po/Makefile.in po/README po/epson.de.po po/mustek.de.po po/mustek_usb.de.po po/plustek.de.po po/pnm.de.po po/saneopts.de.po po/umax.de.po: Moved the options contained in saneopts.h into a seperate file. So the backend po files are much smaller and easier to read and the saneopts translations are consistent through backends. * backend/microtek2.c backend/microtek2.h: Update to backend 0.95-20020112 (from karsten.festag@t-online.de (Karsten Festag)). 2002-01-18 Karl Heinz Kremer * backend/epson.c: Also recognize the GT-xxxx scanners when connected via SCSI or IEEE-1394 interface 2002-01-17 Peter Fales * configure, acinclude.m4, aclocal.m4 - Update gphoto2 version check * backend/gphoto2.c - Improved support for options not supported by camera. Cosmetic cleanup. 2002-01-18 Rene Rebe * docs/sane-avision.man: added the new disable-gamma-table option to the sane-avision man-page. 2002-01-18 Rene Rebe * backend/avision.h, backend/avision.c, backend/avision.conf: many cleanups, fixed sane_cancel to not hang - but perform the cancel, added a disable-gamma-table option and added the possible options into the avision.conf file 2002-01-18 Henning Meier-Geinitz * doc/Makefile.in: Added doxygen-sanei.conf to DIST_FILES. 2002-01-17 Henning Meier-Geinitz * include/sanei/sanei_usb.h: Made documentation doxygen compatible. 2002-01-17 Peter Fales * backend/gphoto2.c, doc/sane-gphoto2.man Remove calls to exit() Support cameras which store all files in top-level directory 2002-01-17 Peter Fales * configure, acinclude.m4, aclocal.m4 - (Really) disable gphoto2 backend unless specifically requested by the user (using --with-gphoto2) and the right CVS version of gphoto2 is found 2002-01-17 Rene Rebe * backend/avision.c removed to call exit in a debug case 2002-01-17 Gerhard Jaeger * backend/plustek.c backend/plustek.h Fixed conditional compilation problem Updated localization strings * doc/sane-plustek.man: Updated * po/plustek.de.po: Updated * doc/doxygen-sanei.conf: Added doxygen configuration file for the sane libs * include/sane/sanei.h include/sane/sanei_ab306.h include/sane/sanei_lm983x.h sanei/sanei_lm983x.c: Updated to support doxygen comments 2002-01-17 Peter Fales * configure.in, configure, acinclude.m4, aclocal.m4 - Disable gphoto2 backend unless specifically requested by the user (using --with-gphoto2) and the right CVS version of gphoto2 is found 2002-01-17 Rene Rebe * backend/avision.h backend/avision.c backend/avision.desc doc/sane-avision.man: Merged the Avision v0.3.0 backend. It includes overall cleanups, improved supported device detection, memory-leak fixes, new config-options, initial USB device and color calibration support. Also upadted the homepage-url and the sane-avision man-page. 2002-01-16 Henning Meier-Geinitz * backend/abaton.desc backend/dmc.desc backend/m3096g.desc backend/mustek.c backend/sp15c.desc backend/v4l.desc: Updated broken URLs for which I could find new ones. Commented out all the others. 2002-01-15 Peter Fales * backend/gphoto2.c: Following yet another gphoto2 API change - converted gp_debug_printf to gp_log configure.in, configure, acinclude.m4, aclocal.m4 - Improvements to the way gphoto2 is detected and used based on using gphoto2-config. 2002-01-15 Henning Meier-Geinitz * backend/pnm.c backend/pnm.desc po/pnm.de.po: Removed descripions of options of type SANE_TYPE_GROUP. Fixed some translations. Fixed header. New version: 1.0.4. * backend/plustek.c backend/plustek.h po/Makefile.in po/plusetk.de.po: Added German translation of Plustek backend options. Marked translatable text in backend sources. 2002-01-14 Oliver Schwartz * backend/snapscan.c backend/snapscan-usb.c: Added workaround for bug in semctl() on PPC; backend version 1.4.5 2002-01-14 Peter Fales * backend/gphoto2.c: Was requiring the device to have the IMAGE_CAPTURE capability - changed this to a warning instead of an error so the "Directory Browse" camera can be used. Don't require a port to be specified for the "Directory Browse" camera. Fixed a bug that can result in extra data at the end of the iamge. Allow the returned image image to be larger than the "estimate" specified in the configuration file. 2002-01-14 Henning Meier-Geinitz * frontend/scanimage.c: Added help message for --formatted-device-list. Added va_end() and #include . Used fprintf to print errors. Fixed some typos. 2002-01-13 Abel Deuring * frontend/scanimage.c, doc/scaniamge.man: Added the option -f / --formatted-device-list to allow arbirtarily formatted device lists. Suggested by Klaas Freitag. 2002-01-13 Henning Meier-Geinitz * acinclude.m4 aclocal.m4 configure: Included AC_PROG_LIBTOOL into acinclude.m4 to avoid trouble with newer versions of libtool. * backend/niash.desc: New file for the niash backend (from Bertrik Sikken ). 2002-01-12 Peter Fales * backend/gphoto2.c - Fixed breakage due to gphoto2 API changes (Added context parameter to functions calls) 2002-01-12 Gerhard Jaeger * doc/sane-plustek.man: Update * backend/plustek-devs.c backend/plustek-usb.c backend/plustek-usbhw.c backend/plustek-usbio.c backend/plustek-usbscan.c backend/plustek-usbshading.c backend/plustek.c: Updated to reflect the current feedback upon the code and added some minor fixes * backend/plustek.desc: Added Mustek and HP entry 2002-01-12 Gerhard Jaeger * include/sane/sanei_lm983x.h sanei/sanei_lm983x.c: added sanei_lm983x_init(), updated comments and fixed the u_long * AUTHORS: Added myself to the list of sanei authors. 2002-01-12 Henning Meier-Geinitz * doc/sane.man doc/scanimage.man: Added link to scanadf. 2002-01-11 Henning Meier-Geinitz * backend/qcam.c: Create lockfile with O_EXCL even when using fcntl locking. Remove it in any case after exiting. Log file handling is still buggy but this has to be done by someone who has a qcam. * sanei/sanei_lm983x.c: Added #include (OS/2 complains otherwise). * backend/pnm.c backend/pnm.desc po/pnm.de.po: hand_scanner and three_pass options need SANE_INFO_RELOAD_PARAMETERS. All options have a symbolic name now. Removed bogus translation from po. New version: 1.0.3. * frontend/saned.c: Check that the IP addresses of the peer are the same for control and data connections. Exit, if this is not the case. Changed some debug levels. * PROJECTS: Updated some URLs. Removed m3096g and Mustek BearPaw (both are included now in SANE). Added test backend and SaneTwain. * TODO: Removed primax (not a backend), fixed viceo URL, updated qcam entries, added entries about ipv6 support, removed saned address validation entry. Added entry about scanimage + NLS. * backend/mustek_usb.c backend/mustek_usb.desc backend/mustek_usb_high.c backend/mustek_usb_high.h backend/mustek_usb_mid.c backend/mustek_usb_mid.h doc/mustek_usb/mustek_usb.CHANGES po/mustek_usb.de.po: Removed some warnings. Fixed segfault while exiting. Using empty devicename works now. New version: 1.0-10. 2002-01-10 Tom Martone * backend/bh.c addressed security issue with tempfile 2002-01-10 Oliver Schwartz * backend/snapscan.c backend/snapscan.h backend/snapscan.desc: Update to snapscan-20020110 (Version 1.4.4) - add support for SnapScan e42 2002-01-10 Gerhard Jaeger * include/sane/sanei_lm983x.h sanei/sanei_lm983x.c sanei/Makefile.in: Added to support for the National Semiconductor LM9831/2/3 chipsets (read/write functions) * backend/plustek.desc: Updated, added missing, now supported devices * backend/plustek.c backend/plustek-share.h backend/plustek.h backend/plustek.conf backend/plustek-usb.c backend/plustek-devs.c backend/plustek-pp.c backend/plustek-usbhw.c backend/plustek-usbimg.c backend/plustek-usbio.c backend/plustek-usbmap.c backend/plustek-usbscan.c backend/plustek-usbshading.c backend/plustek-usb.h: Major changes to use the new sanei_lm983x functions Changed the configuration file to reflect all the possible config-options * backend/Makefile.in: Changed to compile the Plustek backend 2002-01-10 Henning Meier-Geinitz * po/pnm.de.po: Added German translation for pnm backend. * po/mustek.de.po po/mustek_usb.de.po: Updated German translations. They should be complete now. * po/Makefile.in README: Made Makefile more intelligent. Targets are only updated if necessary. No manual copying necessary. Added pnm.de.po to DISTFILES. Added comment about DISTFILES. * backend/mustek_usb.desc: New status: beta. * README: Added description of --enable-translations. * doc/sane.man: Added comment about translations. * Makefile.in: Added Changelogs to DISTFILES. test/Makefile is removed in make distclean now. * doc/backend-writing.txt: Added paragraph about getting started. Added comments about ANSI C, compilation warnings, testing and keeping manpages up-to-date. * backend/pnm.c: Added SANE_I18N() marks. * TODO: Cleanup. Moved several entries to doc/backend-writing.txt. Moved some entries to more appropriate paragraphs. Added entry about missing or defective links in the .desc files. Removed entry about translations. * lib/inet_ntop.c: Changed order of includes for OS/2 compatibility. * frontend/scanimage.c: Added output of bytes scanned in total. Added warning that's printed if scanimage gets more data then expected from the parameters. * include/Makefile.in: Added sanei_lm983x.h to DISTFILES. * backend/qcam.c: Actually close the lock file when unlocking. 2002-01-09 Henning Meier-Geinitz * ChangeLog ChangeLog-1.0.0 ChangeLog-1.0.1 ChangeLog-1.0.2 ChangeLog-1.0.3 ChangeLog-1.0.4 ChangeLog-1.0.5: Splitted ChangeLog to limit filesize. Editing became slow on smaller systems. 2002-01-08 Marcio Teixeira * backend/umax1220u.c: fixed compile warnings * backend/umax1220u-common.c: fixed compile warnings * backend/umax1220u.desc: added info about 2000U, 2200U, 2200US 2002-01-08 Henning Meier-Geinitz * configure configure.in: Added V_EXTRA version number to mark CVS versions (-cvs) and snapshots/betas (e.g. -beta1). V_EXTRA=-pre1 would result in "sane-backends-1.0.7-pre1(.tar.gz)". For release, V_EXTRA is empty. Added NUMBER_VERSION to avoid confusing sane-config and frontends that rely on numbered versions. * tools/sane-config.in: Use @NUMBER_VERSION@. * sane-backends.lsm: Made more compatible with LSM standard. Fixed mostang.com directory. Added OpenBSD. * include/Makefile.in: Added targed "dist". Moved include targets from root dir to this file. Added standard variables and .PHONY. * backend/Makefile.in doc/Makefile.in frontend/Makefile.in japi/Makefile.in lib/Makefile.in po/Makefile.in sanei/Makefile.in testsuite/Makefile.in tools/Makefile.in: Added target "dist". Fixed .PHONY. * Makefile.in: Added targets "dist" and "sane-backends". make dist creates sane-backends-x.y.z.tar.gz and make sane-backends also creates the appropriate sane-x-y-z.lsm. Moved distclean to include/. Fixed .PHONY. Made sane-backands-*.lsm look nicer. * doc/backend-writing.txt: Point to po/README for the I18N details. * doc/releases.txt: Added "make sane-backends" procedure. * po/Makefile.in: make now creates all the files, make install does nothing but installation. * README: Updated. Fixed minor bugs. * AUTHORS: Added sanei authors. * doc/saned.man: Added info about data connection. * po/mustek.de.po: Updated German translation for the Mustek SCSI backend. * frontend/.gdbinit: Removed unnecessary file. 2001-01-08 Stéphane Voltz * configure.in: added help text for --enable-parport-directio 2002-01-07 Henning Meier-Geinitz * PROJECTS: Added link to backend for HP Scanjet 3300C / 3400C and 4300C scanners. Removed umax1220u project (now included in sane-backends). * po/Makefile.in po/README: Added basic support for translating option descriptions and titles of SANE backends. This is really alpha! * po/epson.de.po po/umax.de.po: Updated by make update-po. * po/mustek.de.po mustek_usb.de.po: Added German translations for Mustek SCSI and USB backends. Translations for well-known options are missing. * Makefile.in configure configure.in: Added option --enable-translations to configure. I18N support is disabled by default. * po/.cvsignore: New file. * doc/sane-mustek_usb.man doc/mustek_usb/mustek_usb.CHANGES: Added info about BearPaw scanners and plustek backend. * backend/mustek.c backend/mustek.desc doc/sane-mustek.man doc/mustek/mustek.CHANGES: Small fix for Paragon 1200 Pro. Added some test code for this scanner. Added Trust Imagery 1200 to man page and .desc. New version: 1.0-117. * backend/Makefile.in backend/dll.conf backend/umax1220u-common.c backend/umax1220u.c backend/umax1220u.conf backend/umax1220u.desc: Added new backend umax1220u for UMAX Astra 1220U and 2000U scanners (patch from Marcio Luis Teixeira ). * doc/Makefile.in doc/sane.man doc/sane-umax1220u.man: Added documentation fo umax1220u backend (patch from from Marcio Luis Teixeira ). * AUTHORS: Added Marcio Luis Teixeira. * TODO: Removed umax1220u project (now included in sane-backends). Added HP Scanjet 3300C / 3400C and 4300C project. Added entry about saned data port documentation. Removed saned race condition bug. * doc/.cvsignore: Added sane-umax1220u.5. 2002-01-06 Henning Meier-Geinitz * configure configure.in include/sane/config.h.in: Added check for inet_ntop(). * lib/inet_ntop.c lib/Makefile.in backend/Makefile.in: Added implementation of inet_ntop() for platforms withouth this function based on inet_ntoa. * backend/saned.conf frontend/saned.c doc/saned.man: Changed access control (function check host). Now IP addresses are used for comparison, not host names as before. It's possible to put hostnames, FQDNs and IP addresses into saned.conf. Limitations: Only the first IP address in struct hostent is checked. IPv6 is untested. The change is based on a patch by Petter Reinholdtsen . Return SANE_STATUS_ACCESS_DENIED if access was not granted instead of SANE_STATUS_IO_ERROR. Removed isfdtype to avoid compilation problems. Added more debug output. Print function name in every DBG statement. Updated manual pages and saned.conf. * net.c: Return SANE_STATUS_ACCESS_DENIED if access was not granted instead of SANE_STATUS_IO_ERROR. 2001-01-06 Karl Heinz Kremer * backend/epson.c: Undefine TEST_IOCTL again, which was enabled by accident. 2001-01-06 Stéphane Voltz * backend/umax_pp_low.c: improved warm up and color calibration of much better quality now. Manual settings now work correctly. Corrected parport mode being set before being claimed. * backend/umax_pp.c: changed build number. * tools/umax_pp.c: changed version. 2002-01-05 Oliver Rauch * backend/umax-scanner.c, umax.c, umax.conf, umax.desc, umax.h: update to backend version 1.0 build 32 2002-01-05 Karl Heinz Kremer * backend/epson.[ch]: Check for (and set) s->fd to -1 when scanner is closed. Removed black gamma table - only RGB is used, even for grayscale scans. Do not call access() when running on OS/2 or when using a parallel port scanner. 2002-01-05 Henning Meier-Geinitz * backend/net.c backend/net.desc: Fixed race condition between saned sending NET_OPEN reply and net.c flushing the wire. New version: 1.0.6. * doc/saned.man frontend/saned.c: Changed debug handling. All debug messages use DBG now. If in inetd mode or dameon mode with "-s", the messages are printed to syslog as before. If option "-d" is used, the mesages are printed to stderr. Updated manual page. 2002-01-04 Henning Meier-Geinitz * sanei/sanei_wire.c: Added DBG message that warns if the read buffer is going to be deleted (data loss). 2002-01-03 Henning Meier-Geinitz * README.os2: Updated URL of Franz Bakan's web site. * include/sane/sanei_usb.h sanei/sanei_usb.c: Added support for USB control messages (patch from Marcio Luis Teixeira ). * doc/sane-usb.man: Updated concerning backends supporting sanei_usb and OpenBSD. Other minor fixes. * include/sane/sanei_pv8630.h sanei/sanei_pv8630.h sanei/Makefile.in: Added support for the PowerVision 8630 chip, a USB to parallel converter used in many scanners (patch from from Marcio Luis Teixeira ). Fixed sanei_thread Makefile.in entry. * TODO: Added entries about saned/net freezes and parport-directio doc. Removed entries about sanei_usb control msg, sanei_pv8630 inclusion, OS/2 libsocket problem, and splitting --enable-directio. 2001-12-30 Henning Meier-Geinitz * frontend/scanimage.c: Fixed endless loop in sighandler. * frontend/saned.c: Fixed sigpipe race in connection with select_fd. Added debug output. 2001-12-30 Gerhard Jaeger * backend/plustek_usbmap.c backend/plustek-usbimg.c backend/plustek_usb.c backend/plustek_usb.h: Fixed bug in lineart scaling and in brightness setting 2001-12-29 Gerhard Jaeger * backend/plustek.c backend/plustek-share.h backend/plustek.h backend/plustek.conf: Changed to support the LM983x based USB scanner * backend/plustek.desc: Updated, added missing, now supported devices * backend/plustek-usb.c backend/plustek-devs.c backend/plustek-pp.c backend/plustek-usbhw.c backend/plustek-usbimg.c backend/plustek-usbio.c backend/plustek-usbmap.c backend/plustek-usbscan.c backend/plustek-usbshading.c backend/plustek-usb.h: New files - added to support the Plustek USB devices (LM9831/2 based) and other devices based on this chipset * backend/Makefile.in: Changed to compile the Plustek backend * doc/sane-plustek.man: Added some USB information 2001-12-28 Henning Meier-Geinitz * configure configure.in: Changed order of tests for libsocket and libsyslog to avoid problems with OS/2. Small spelling and format fixes. 2001-12-28 Abel Deuring * configure.in, configure, sanei/sanei_scsi.c, umax_pp_low.c, README.linux: replaced --enable-directio and ENABLE_DIRECTIO with --enable-scsi-directio / --enable-parport-directio resp. ENABLE_SCSI_DIRECTIO / ENABLE_PARPORT_DIRECTIO 2001-12-27 Henning Meier-Geinitz * PROJECTS TODO: Updated info about "Relisys Scorpio Super 3 SCSI II". 2001-12-25 Henning Meier-Geinitz * README.linux: Used "sane-find-scanner". Some minor changes. * config.guess config.sub: Updated from http://savannah.gnu.org/projects/config. * TODO: New section: "platform-specific". Added some problems with *BSD. Some minor fixes and additions. * tools/sane-find-scanner.c: Added OpenBSD device files. * README.openbsd: New file. Some information on how to get SANE running on top of OpenBSD. 2001-12-22 Henning Meier-Geinitz * backend/mustek_usb.c backend/mustek_usb.conf backend/mustek_usb.desc backend/mustek_usb_low.c backend/mustek_usb_low.h doc/sane-mustek_usb.man doc/mustek_usb/mustek_usb.CHANGES: Made usb_low_read_rows more robust. Limited maximum block size and added option for this. New version: 1.0-9. 2001-12-21 Oliver Schwartz * backend/snapscan.c backend/snapscan.h Remove tmpfname var 2001-12-20 Peter Fales * backend/dc25.c - Fixed a potential security problem due to a race condition involving temporary file creation. Also did some cosmetic cleanup and removed some un-needed code. 2001-12-19 Henning Meier-Geinitz * backend/dll.conf: Added (commented out) st400 entry. 2001-12-18 Oliver Schwartz * backend/snapscan.c backend/snapscan.h Remove temporary file 2001-12-18 Ingo Wilken * backend/st400.c backend/st400.conf Security fix: Dump inquiry data to $HOME/st400.dump instead of /tmp/st400.dump. 2001-12-17 Oliver Schwartz * backend/snapscan-scsi.c backend/snapscan.h backend/snapscan-usb.h backend/snapscan-usb.c backend/snapscan-sources.h backend/snapscan-sources.c backend/snapscan.c backend/snapscan.desc Update to snapscan-20011212 (snapscan backend 1.4.3): - Use sense handler for USB scanners - Correct color alignment for Snapscan 600 - Fix dither matrix computation - Add support for Snapscan e26 and e52 - Guard for TL_X < BR_X and TL_Y < BR_Y 2001-12-16 Peter Kirchgessner * frontend/stiff.c Add fillorder tag for b/w-TIFF-files Include stiff.h to avoid warning "no previous prototype" 2001-12-15 Henning Meier-Geinitz * backend/mustek.c backend/mustek.desc doc/mustek/mustek.CHANGES: Fixed a possible segfault in sane_control_option. Added more debug output for SCSI commands. New version: 1.0-116. 2001-12-01 Henning Meier-Geinitz * sanei/sanei_ab306: Removed warning: `dev_io_fd' defined but not used. Variable used only by FreeBSD. Added test for FreeBSD. Patch from Stephen Torri . 2001-11-30 Henning Meier-Geinitz * testsuite/Makefile.in testsuite/README: Added comment about the need to enable pnm. Made output easier to read. 2001-11-29 Henning Meier-Geinitz * backend/mustek.c backend/mustek.desc doc/mustek/mustek.CHANGES: Added check for TL_X > BR_X or TL_Y > BR_Y. New version: 1.0-115. * TODO: Added entry about TL_X < BR_X problems and semaphores for OS/2. Removed entry about BearPaw scanners. 2001-11-26 Abel Deuring * backend/sharp.c: added an additional check to prevent OS/2 from define "#define USE_FORK" 2001-11-24 Abel Deuring * backend/sharp.c: removed an unconditional "#define USE_FORK" 2001-11-22 Stéphane Voltz * backend/umax_pp_low.c: fixed color calibration bug. Scans are of much better quality now. Manual settings now work correctly. * tools/umax_pp.c: changed version. 2001-11-22 Henning Meier-Geinitz * config.guess config.sub: Fetched new versions from http://savannah.gnu.org/projects/config. * mkinstalldirs: Updated for OS/2 (from "Franz Bakan" ). * backend/mustek.c backend/mustek.desc backend/mustek.h doc/mustek/mustek.CHANGES: Added OS/2 compatibility fixes (from "Franz Bakan" ). New version: 1.0-114. * sanei/sanei_scsi.c: OS/2 changes: Removed semaphore code and increased MAX_DATA to 64k (from "Franz Bakan" ). * tools/sane-config.in: Also return -ldl (necessary fo IA64?). * TODO: Added entry about .exe and similar file extentions. Removed sane-config.in -ldl issue. 2001-11-22 Stéphane Voltz * backend/umax_pp_low.c: fixed build problem on non i386 linux when there is no . 2001-11-21 Henning Meier-Geinitz * TODO: Added entries about the fork/kill(-1,...) issue, the inb/outb problems, config.guess and sane-config.in. * sanei/Makefile.in: Added sanei_thread for OS/2 portability. 2001-11-20 Henning Meier-Geinitz * doc/scanimage.man frontend/scanimage.c: Use out%d.tif by default if --format tiff was selected. Update documentation about default formats. Fixed spelling mistakes. * AUTHORS: I think this was planned in alphabetical order... 2001-11-18 Karl Heinz Kremer * backend/epson.c: Fixed Wait for Button functionality. Don't call access() for par port scanners. 2001-11-18 Karl Heinz Kremer * backend/epson.h: Added missing defines for USB IOCTLs 2001-11-18 Henning Meier-Geinitz * backend/mustek.desc doc/sane-mustek.man doc/mustek/mustek.CHANGES: Added enries for Primax Compact 4800. 2001-11-15 Henning Meier-Geinitz * backend/mustek_usb.c backend/mustek_usb.conf backend/mustek_usb.desc backend/mustek_usb.h backend/mustek_usb_high.c backend/mustek_usb_high.h backend/mustek_usb_low.c backend/mustek_usb_low.h backend/mustek_usb_mid.c backend/mustek_usb_mid.h doc/sane-mustek_usb.man doc/mustek_usb/mustek_usb.CHANGES doc/mustek_usb/mustek_usb.TODO: FreeBSD is supported to some degree now. Started 1200 USB support. Documentation updates. New version: 1.0-8. 2001-11-12 Peter Fales * gphoto2.c - Debug message was not getting printed because DBG_INIT was not called first. 2001-11-12 Henning Meier-Geinitz * doc/sane-scsi.man: More details and examples for the "scsi * ..." directive for config files. Added information about debug level 255 printing (Linux) kernel debug messages. Added link to sane-usb(5). 2001-11-10 Stéphane Voltz >>>>>>> 1.539 * backend/umax_pp_low.c: correct PPC compile problem by removing buggy extra ifdef 2001-11-11 Peter Fales * gphoto2.c - Number of images was not getting updated after capturing a new image 2001-11-11 Henning Meier-Geinitz * backend/dll.c backend/dll.desc doc/sane-dll.man: Added some debug messages (e.g. if dll.conf isn't found). Some adjustments concerning debug levels. Removed some compilation warnings. New version: 1.0.5. 2001-11-11 Abel Deuring * sanei/sanei_scsi.c (Linux part): - improved handling of status codes returned by the SG driver. Device status INTERMEDIATE GOOD and CONDITION MET are now mapped to SANE_STATUS_GOOD; device status BUSY and a few driver status codes are mapped to SANE_STATUS_DEVICE_BUSY - On SCSI command completion, the (sometimes bogus) residual count is no longer subtracted from *req->dstlen * backend/sharp.c: if a READ command fails with SANE_STATUS_DEVICE_BUSY, retry a few times. 2001-11-10 Karl Heinz Kremer * backends/epson.[ch]: all strings tagged with I18N macro Added support for scan button, scanner waits for button if the option "wait-for-button" is activated. 2001-11-10 Stéphane Voltz * backend/umax_pp_low.c backend/umax_pp_low.h backend/umax_pp_mid.c backend/umax_pp_mid.h backend/umax_pp.c backend/umax_pp.h: use ENABLE_DIRECTIO to compile in direct I/O. Corrected the long standing scan area origin detection bug. Improved parport mode negociation. 2001-11-07 Henning Meier-Geinitz * sanei/sanei_usb.c: Fixed debug messages. 2001-11-06 Peter Fales * dc240.c - fix a bug that causes the backend's internal directory to get out of sync with the camera directory when a file is deleted * gphoto2.c - include the gphoto2 port name as part of the SANE device name and improve reliability when using the gphoto2 serial port libs. 2001-11-04 Henning Meier-Geinitz * configure configure.in: Enabled warnings by default. * sane-backends.lsm: Made more compatible with template. Added myself as maintainer to avoid problems when uploading to tsx-11 and sunsite in future. ****** Release of sane-backends 1.0.6. End of code freeze ****** 2001-11-04 Henning Meier-Geinitz * sane-backends.lsm: Added keyword gphoto. 2001-10-31 Peter Fales * acinclude.m4, aclocal.m4, configure - Fix build failure due to renaming of gphoto2 header files 2001-10-30 Henning Meier-Geinitz * backend/apple.desc: Updated URL. * backend/canon_pp.desc: Fixed two wrong scanner names (from "Matthew Duggan" ). * backend/m3091.desc backend/m3096.desc backend/sp15c.desc: Updated URL. 2001-10-29 Peter Fales * backend/dc25.desc - Update URLs 2001-10-19 Oliver Rauch * set correct backend version number in backend/umax.desc ****** code freeze sane-1.0.6 / sane-pre1-1.0.6 ***** 2001-10-29 Henning Meier-Geinitz * backend/microtek2.desc: Added missing scanner descriptions (from karsten.festag@t-online.de (Karsten Festag)). * NEWS: Updated version numbers. Added release date. * configure configure.in: New version: 1.0.6. Disabled warnings by default. 2001-10-28 Peter Fales * backend/gphoto2.c, backend/gphoto2.conf: the ghoto2 people made some pretty radical changes to the API and broke the gphoto2 backend. Made the changes to allow the gphoto2 backend to work with the latest changes from the gphoto2 library CVS. 2001-10-28 Karl Heinz Kremer * backend/epson.c: Fixed bug in recognition of faulty Perfection 1650 2001-10-28 Henning Meier-Geinitz * TODO: Removed entry about @LIBDIR@ and @CONFIGDIR@ in man pages. Added Entry about sanei_scsi return values and timeout. * backend/microtek2.desc backend/microtek2.h doc/sane-microtek2.man: Increased version number to 0.95. Updated man page. Patch from karsten.festag@t-online.de (Karsten Festag). 2001-10-27 Peter Kirchgessner *backend/hp-accessor.c hp-device.c hp-handle.c hp-hpmem.c hp-option.c hp-scl.c: Use ../include/lassert.h 2001-10-17 Oliver Rauch * umax backend bugfixes (new version number: 1.0 build 31): man page uses @LIBDIR@ and @CONFIGDIR@, calibration fix for Supervista S-12 and compatible scanners directory backend: umax.c umax-scanner.c umax-scsidef.h directory doc: sane-umax.man /umax/sane-umax-advanced-options-doc.html umax/sane-umax-standard-options-doc.html umax/umax.CHANGES 2001-10-27 Oliver Schwartz * backend/Makefile.in backend/snapscan-usb.c backend/snapscan-usb.h backend/snapscan.c backend/snapscan.h Check USB vendor ID to avoid USB hangup Fix dither matrix computation bug ****** snapshot 2001-10-27 ***** 2001-10-26 Oliver Schwartz * backend/snapscan.conf Make /dev/sga the default device to avoid USB hangup 2001-10-26 Henning Meier-Geinitz * TODO: Removed net/saned cancel problem. Added entry about clarifying sane_get_select_fd/sane_cancel in sane.tex. Added entry about sanei_usb and control messages. * sanei/sanei_usb.c: Fixed vendor/device detection for Linux versions >= 2.4.13. 2001-10-25 Oliver Schwartz * NEWS backend/snapscan.c backend/snapscan.desc Change snapscan backend version number to 1.4.0 2001-10-24 Henning Meier-Geinitz * backend/microtek2.c backend/microtek2.desc backend/microtek2.h doc/sane-microtek2.man: Updated microtek2 backend to build 20011023 (from karsten.festag@t-online.de (Karsten Festag)). Bugfix for scsi_read_image_status - supports now the old and the new method. Improved backend-calibration supports brightness and contrast settings and color balancing. Enable 12 bit per color scanning with Scanmaker 9600XL (and other types that use the segreg pixel transfer format and support 12 bit, untested). 10 bit does not work yet. Make C6 USB work. 2001-10-24 Oliver Schwartz * doc/sane-snapscan.man Documentation update. 2001-10-23 Oliver Schwartz * backend/snapscan-scsi.c Limit number of scan lines for quality calibration to fit in SCSI buffer. 2001-10-21 Peter Kirchgessner * backend/hp.desc, doc/sane-hp.man Add support for OfficeJet PSC 900 series 2001-10-20 Karl Heinz Kremer * backend/epson.[ch]: Fix for older Perfection 1650 scanners - their firmware only reports half of the vertical scanning area and they need to swap two color channels. 2001-10-19 Henning Meier-Geinitz * PROJECTS: Added Coolscan2 backend. 2001-10-15 Peter Fales * backend/gphoto2.c, backend/gphoto2.h: Cosmetic cleanup ****** Feature freeze for sane-1.0.6 is active ***** ****** snapshot 2001-10-15 ***** 2001-10-15 Henning Meier-Geinitz * TODO: Removed some entries about net/saned. * doc/saned.man: Clear up that a FQDN must be used in saned.conf and that localhost is allways granted acces. * NEWS: Updated. 2001-10-14 Jochen Eisinger * backend/mustek_pp.conf: added comment about changes in the naming of ports in 2.4.x 2001-10-13 Oliver Rauch * backend/umax.c, bachend/umax-scanner.c, backend/umax.desc, doc/umax/sane-umax-config-doc.html, doc/umax/umax.CHANGES, doc/sane-umax.man: update to sane-umax-1.0 build 30: - added EDGE KTX-9600US as supported scanner - Changing scansource does not change lower left selection edge if not necessary 2001-10-12 Oliver Schwartz * backend/snapscan-scsi.c backend/snapscan.h backend/snapscan.c Update to snapscan-20011012 2001-10-12 Henning Meier-Geinitz * sanei/sanei_wire.c: Added debug output (based on patch from Jochen Eisinger ). * backend/net.c backend/net.desc: Better and more debug output (based on patch from Jochen Eisinger ). Fixed some debug output and formatting issues of the byte order patch. Increased version number to 1.0.5. * frontend/saned.c: More debug output. Used DBG instead of fprintf/perror. Fixed some formatting issues. 2001-10-10 Jochen Eisinger * sanei/sanei_wire.c: replaced memcpy with memmove 2001-10-10 Jochen Eisinger * PROJECTS: added URL to HP ScanJet 2200c project 2001-10-10 Henning Meier-Geinitz * backend/m3096g-scsi.h backend/m3096g.c backend/m3096g.h doc/sane-fujitsu.man: Update (from Oliver Schirrmeister ). Added: Support for ipc2/3 and cmp2 options; support for duplex-scanners m3093DG, m4097DG; constraint checking for m3093; support EVPD (virtual product data); support ADF paper size spezification. * AUTHORS: Added Oliver Schirrmeister for m3096g, removed the active sign (*) from Randolph Bentson. 2001-10-09 Peter Fales * backend/dc210.c, backend/dc210.h: Fix compiler warnings 2001-10-09 Oliver Schwartz * backend/snapscan-scsi.c backend/snapscan-usb.c backend/snapscan.c Fix compiler warnings 2001-10-09 Peter Fales * backend/gphoto2.desc: Yet another try at getting a format that generates the right web page. 2001-10-09 Henning Meier-Geinitz * backend/ibm.desc: Removed old entry. * backend/sm3600.desc: Changed status to :alpha. * doc/sane-agfafocus.man: Fixed some small mistakes. * doc/sane-apple.man: Fixed some small mistakes. Added link to mostang.com mailing list archive. * doc/sane-artec.man: Fixed spelling mistake and formatting issues. * doc/sane-nec.man: Fixed problem with table. * doc/sane-sharp.man: Fixed problem with table. * backend/sharp.desc: Added link to sane-sharp manual page. * doc/sane_mustek_pp.man: Removed link to sane-musteka4s2 (doesn't exist). * doc/sane-abaton.man doc/sane-agfafocus.man doc/sane-apple.man doc/sane-bh.man doc/sane-microtek.man doc/sane-pint.man doc/sane-st400.man: Added link to mostang.com mailing list page. * backend/net.c backend/net.desc: Fixed byte order problems for 16 bits per color image data (from mh ). * TODO: Removed entries about .desc files, man pages and net.c byte-order problem. 2001-10-09 Oliver Schwartz * backend/snapscan-scsi.c backend/snapscan-sources.c backend/snapscan-sources.h backend/snapscan-usb.c backend/snapscan-usb.h backend/snapscan.c backend/snapscan.conf backend/snapscan.desc backend/snapscan.h Update to snapscan-20011008 2001-10-08 Peter Fales * backend/gphoto2.desc: Another try at getting a format that generates the right web page. 2001-10-08 Henning Meier-Geinitz * backend/ibm.desc: New file. Backend for the IBM 2456 and the Ricoh IS-410. * PROJECTS: Added IBM backend. Removed gphoto2 (now included in distribution). 2001-10-07 Peter Fales * backend/gphoto2.desc: Cleaned up syntax errors doc/sane.man: Added gphoto2 backend to digital camera section AUTHORS: Added gphoto2 backend/author 2001-10-07 Henning Meier-Geinitz * backend/mustek_usb.c backend/mustek_usb.conf backend/mustek_usb.desc backend/mustek_usb_high.c backend/mustek_usb_high.h backend/mustek_usb_low.c backend/mustek_usb_low.h backend/mustek_usb_mid.c backend/mustek_usb_mid.h doc/mustek_usb/mustek_usb.CHANGES: Fixed problem with 1200UB sensor detection. Started work on 1200 USB. New version: 1.0-7. 2001-10-07 Oliver Rauch * created directory "po" added files po/epson.de.po and po/umax.de.po we have to define how we will handle (include+install) translations, in the moments the files are only added to the directory structure without any function 2001-10-06 Henning Meier-Geinitz * backend/canon_pp.desc: New file (from Matthew Duggan . 2001-10-05 Henning Meier-Geinitz * TODO: Removed entries about hp and plustek backends. * backend/microtek2.c backend/microtek2.h doc/sane-microtek2.man: Updated Microtek2 backend to version 0.9 build 20010828 (from Karsten Festag ). * NEWS: Updated. 2001-10-04 Peter Kirchgessner * backend/hp-accessor.c hp-device.c hp-handle.c hp-hpmem.c hp-option.c hp-scl.c Use include "../include/assert.h" doc/sane-hp.man Tell about subscribing to sane-devel 2001-10-03 Henning Meier-Geinitz * README.hp-ux: Lots of new and updated information (from Michael Piotrowski ). 2001-10-02 Henning Meier-Geinitz * backend/dll.c backend/dll.desc: HP/UX uses .sl for shared libs. Changed status to "stable". Increased version number. * tools/sane-find-scanner.c: Check for __hpux instead of __hpux__. 2001-10-01 Henning Meier-Geinitz * TODO: Added possible saned problem with (not) fully qualified domain names. 2001-09-29 Peter Fales * backend/gphoto2.c, backend/gphoto2.h, backend/gphoto2.desc: Cosmetic cleanup and minor fixes. Added list of gphoto2 supported cameras to gphoto2.desc, even though most of them are not tested and probably not working yet. 2001-09-24 Peter Fales * backend/gphoto2.c, backend/gphoto2.h, backend/gphoto2.conf: Cosmetic cleanup and changes to reflect changes to the gphoto2 API. 2001-09-23 Henning Meier-Geinitz * TODO: Added SCSI problem with Linux/Sparc. 2001-09-21 Henning Meier-Geinitz * sanei/sanei_scsi.c: Fixed detection of SCSI devices that return device strings (vendor, product) consisting of spaces. sanei_scsi_req_enter2 was changed to copy the CDB and data before sending it to the device. Both patches are from Abel Deuring. * sanei/sanei_config2.c: Removed some remainings of the USB merge. 2001-09-18 Henning Meier-Geinitz * backend/umax1220u.desc: New file (from Marcio Luis Teixeira ). * PROJECTS: Updated Winsane address. * TODO: Added net/saned and .desc file entries. Removed scanimage/adf extention entry. * backend/pnm.c backend/pnm.desc: Make sure that *length=0 in sane_read(). Added more debug output. 2001-09-18 Stéphane Voltz * backend/umax_pp_low.c backend/umax_pp.desc: corrected compile problem when no ppdev available, changed status from :new to :beta. 2001-09-17 Peter Fales * backend/gphoto2.c: Converted from test code using pipes to the command line program to using the camera API. Currently only supportes cameras that natively generate jpeg files. 2001-09-17 Tom Martone * backend/bh.desc changed status from :new to :beta 2001-09-17 Simon Munton * backend/pie.c backend/pie.conf: Changed ADLIB to AdLib as this is what the scanner returns and the comparison is case sensitive * doc/sane-pie.man: Update the status of the AdLib JetScan 630 2001-09-17 Henning Meier-Geinitz * PROJECTS: Removed (very) old entries. Removed backends which are included in the distribution now. Updated bearpaw and OS/2 entries. * NEWS: Created preliminary entry for 1.0.6. 2001-09-16 Peter Fales * backend/dc240.desc: Change status from new to alpha acinclude.m4, aclocal.m4, configure: Cosmetic changes to help text and change function used in gphoto2 lib check due to API change 2001-09-16 Stéphane Voltz * backend/umax_pp_low.c backend/umax_pp_mid.c tools/umax_pp.c: change ppdev support to compile and run on linux kernel prior to 2.4.5 2001-09-13 Henning Meier-Geinitz * backend/mustek_usb.c backend/mustek_usb.desc backend/mustek_usb_high.c backend/mustek_usb_high.h backend/mustek_usb_mid.c backend/mustek_usb_mid.h doc/sane-mustek_usb.man doc/mustek_usb/mustek_usb.CHANGES doc/mustek_usb/mustek_usb.TODO: Update to mustek_usb backend 1.0-6. Increased resolution to the maximum hardware supports. No fixed resolution any more. Gamma table support. Bugfixes. 2001-09-12 Peter Fales * acinclude.m4 aclocal.m4 configure configure.in: Changes to start using gphoto2 libraries in gphoto2 backend backend/gphoto2.c backend/gphoto2.h: Use gphoto2 headers and library functions for list management 2001-09-12 Peter Fales * backend/doc/.cvsignore: Added gphoto2 man page to .cvsignore 2001-09-11 Peter Fales * backend/doc/Makefile.in: Added man page for gphoto2 backend 2001-09-11 Henning Meier-Geinitz * backend/Makefile.in: Added mustek_usb again. 2001-09-10 Peter Fales * backend/gphoto2.c, backend/Makefile.in, configure.in, configure, acinclude.m4, aclocal.m4: Add gphoto2 backend to Makefiles. It's disable if the gphoto2 program is not present. 2001-09-10 Henning Meier-Geinitz * backend/mustek.c backend/mustek.desc doc/mustek/mustek.CHANGES: Fixed problem with gamma correction. New version: 1.0-113. * backend/mustek_usb.c backend/mustek_usb.desc backend/mustek_usb_high.c backend/mustek_usb_low.c backend/mustek_usb_low.h backend/mustek_usb_mid.c backend/mustek_usb_mid.h doc/mustek_usb/mustek_usb.CHANGES: 200 dpi support for 600 CU. Some internal reorganizations. New version: 1.0-5. 2001-09-09 Henning Meier-Geinitz * backend/mustek_usb.c backend/mustek_usb.conf backend/mustek_usb.desc backend/mustek_usb.h backend/mustek_usb_high.c backend/mustek_usb_high.h backend/mustek_usb_low.c backend/mustek_usb_low.h backend/mustek_usb_mid.c backend/mustek_usb_mid.h: Added backend mustek_usb for Mustek USB scanners. Currently the 600 CU, 1200 CU, 1200 CU Plus and 1200 UB are supported. * backend/Makefile.in dll.conf: Added entries for mustek_usb. * doc/Makefile.in doc/mustek_usb/mustek_usb.CHANGES doc/mustek_usb/mustek_usb.TODO doc/sane-mustek_usb.man: Added mustek_usb documentation. * doc/sane.man: Updated concerning mustek_usb. * PROJECTS TODO: Updated concerning mustek_usb. * doc/.cvsignore: Added sane-mustek_usb.5. * AUTHORS: Added mustek_usb authors. * backend/pnm.c: Fixed SANE-standard compliancy bug in sane_read: length must be set to 0 if status != SANE_STATUS_GOOD. 2001-09-08 Oliver Rauch * added information for device filesystem permissions in doc/sane-scsi.man 2001-09-06 Peter Fales * backend/gphoto2.c, backend/gphoto2.h, backend/gphoto2.conf, backend/gphoto2.desc, doc/sane-gphoto2.man: Initial files for gphoto2 backend (interface to cameras supported by the gphoto2 commands/libraries). Makefile changes coming soon. 2001-09-06 Stéphane Voltz * backend/umax_pp_low.c: made CmdSetDataBuffer static * backend/Makefile.in: removed sanei_config2 from umax_pp depencies 2001-09-05 Jochen Eisinger * backend/net.c: ignoring size of parameter value for SANE_ACTION_SET_AUTO (as described in the SANE standard) 2001-09-05 Henning Meier-Geinitz * sanei/sanei_ab306.c: Added FreeBSD support. * include/sane/sanei_usb.h sanei/sanei_config2.c sanei/sanei_usb.c: Moved the function to check the "usb VENDOR PRODUCT" config lines to sanei_usb to avoid linking problems. * backend/Makefile.in: Fixed spelling mistakes concerning st400. * Makefile.in: make libcheck now also prints the name(s) of the `illegal' functions. 2001-09-04 Henning Meier-Geinitz * PROJECTS: Added m3096g updates and website. Added 600CU to list of supported Mustek USB scanners. 2001-09-04 Jochen Eisinger * backend/net.desc doc/saned.man doc/sane-net.man: added pointer to new saned homepage (http://home.nexgo.de/jochen.eisinger/saned/) 2001-09-04 Peter Kirchgessner * backend/hp-device.[hc] hp-handle.c hp-scl.[hc] hp-option.[hc] hp.[hc] hp.desc doc/sane-hp.man: Add support for active XPA Check if paper in ADF for ADF scan Add option lamp off Remove some really unused parameters 2001-09-04 Peter Fales * backend/PROJECTS: Added gphoto2 project to provide support for some or all of the cameras supported by gphoto2. (See http://www.gphoto.org) 2001-09-03 Stéphane Voltz * backend/umax_pp_low.c backend/umax_pp_mid.c backend/umax_pp_mid.h backend/umax_pp.c tools/umax_pp.c: Make use of ppdev char device when available, so that the backend does not require root priviledges anymore. 2001-08-30 Henning Meier-Geinitz * backend/Makefile.in: Added sanei_usb dependency. 2001-08-26 Henning Meier-Geinitz * backend/dll.c doc/sane.man frontend/scanimage.c sanei/sanei_usb.c tools/sane-find-scanner.c : Fixed minor bugs in debug output and documentation. * backend/mustek.c backend/mustek.desc doc/sane-mustek.man doc/mustek/mustek.CHANGES: Update to backend version 1.0-112. Some minor fixes for returning the scan slider and OS/2. 2001-08-26 Oliver Rauch * backend/umax.c backend/umax.desc doc/umax/umax.CHANGES: umax scsi backend update to version 1.0 build 29 2001-08-19 Stéphane Voltz * backend/umax_pp_low.c tools/umax_pp.c: Finished probe code cleaning, increased version number 2001-08-16 Henning Meier-Geinitz * configure configure.in: Fixed bug concerning libusb that broke compilation on NetBSD. * doc/sane-find-scanner.man doc/sane-usb.man sanei/sanei_usb.c tools/sane-find-scanner.c: Added (limited) support for FreeBSD. 2001-08-11 Henning Meier-Geinitz * include/sane/sanei_thread.h sanei/sanei_thread.c: Updated sanei_thread functions (from Yuri Dario) and made clear that they shouldn't be used directly. * include/sane/sanei_usb.h sanei/Makefile.in sanei/sanei_usb.c doc/Makefile.in doc/sane-usb.man: Added sane USB interface. * include/sane/sanei_config.h sanei/sanei_config2.c: Added support for searching USB devices ("usb vendor product"). * doc/sane-find-scanner.man tools/Makefile.in tools/sane-find-scanner.c: Added USB support. * doc/sane.man: Added information for USB scanners. * TODO: Removed USB entries. Removed entry about checking for /etc/ld.so.conf, this shouldn't be necessary any longer. Removed entry about saned freezing, no bug reports about this for a long time. Removed entry about moving .desc files, this doesn't seem to be necessary. Added proposal to include libieeee1284. * doc/.cvsignore: Updated concerning sane-usb.5. 2001-08-05 Peter Fales * backend/dc240.c - Previously, the backend always assumed that the images were stored in the 100DC240 directory in the camera. It now determines the directory automatically. If multiple directories are present, it will eventually let you pick the directory, but that feature hasn't been completed yet. 2001-08-05 Henning Meier-Geinitz * backend/mustek_usb.desc: New file. This backend supports the Mustek 1200UB, 1200CU and 1200CU Plus. * PROJECTS TODO: Updated concerning mustek_usb backend. 2001-08-01 Henning Meier-Geinitz * PROJECTS TODO: Added UMAX Astra 1220U backend. 2001-08-01 Stéphane Voltz * doc/sane-umax_pp.man backend/umax_pp_low.c: One more step toward cleaner scanner probing. Added message about EPP mode not being available. Slight man update to emphasize EPP mode setting. 2001-07-24 Stéphane Voltz * backend/umax_pp.c backend/umax_pp_low.c: Fixed higlight parsing bug in conf file. Fixed 'greenish' looking scans bug. Started probe sequence rewrite/cleanup. 2001-07-18 Henning Meier-Geinitz * sanei/sanei_init_debug.c: Use syslog.h instead of sys/syslog.h. 2001-07-18 Henning Meier-Geinitz * backend/mustek.c backend/mustek.desc doc/mustek/mustek.CHANGES: Call stop_scan only when scan was cancelled. Some more debug messages. New version: 1.0-111. 2001-07-11 Peter Fales * backend/dc240.c - Using scanimage with the "thumbnails" option and attempting to connect to a powered off camera was causing a core dump. 2001-07-11 Henning Meier-Geinitz * backend/mustek.c backend/mustek.desc backend/mustek.h doc/mustek/mustek.CHANGES: Fixed bug in fix_line_distance_block that resulted in too much data transfered to the frontend. New version: 1.0-110. 2001-07-09 Henning Meier-Geinitz * backend/mustek.c backend/mustek.conf backend/mustek.desc backend/mustek.h doc/sane-mustek.man doc/mustek/mustek.CHANGES: Fixed problem with SCSI command queuing. Fixed problem that resulted in black images on some Paragon 6000SP scanners. Added option to disable backtracking. New version: 1.0-109. 2001-07-07 Henning Meier-Geinitz * doc/Makefile.in: Use 6 lines as top/bottom margin for man2html to avoid losing 2 lines at every page break. * backend/mustek.c backend/mustek.conf backend/mustek.desc doc/sane-mustek.man doc/mustek/mustek.CHANGES: Added option for disabling double-buffering. Updated man page. New version: 1.0-108. 2001-07-02 Henning Meier-Geinitz * configure configure.in: Enabled warnings by default. Older entries can be found in ChangeLog-1.0.5.