/*.............................................................................
* Project : SANE library for Plustek flatbed scanners.
*.............................................................................
*/
/** @file plustek-usbdevs.c
* @brief Here we have our USB device definitions.
*
* Based on sources acquired from Plustek Inc.
* Copyright (C) 2001-2006 Gerhard Jaeger
*
* History:
* - 0.40 - starting version of the USB support
* - 0.41 - added EPSON1250 entries
* - changed reg 0x58 of EPSON Hw0x04B8_0x010F to 0x0d
* - reduced memory size of EPSON to 512
* - adjusted tpa origin of UT24
* - 0.42 - added register 0x27, 0x2c-0x37
* - tweaked EPSON1250 settings according to Gene and Reinhard
* - tweaked HP2200 settings according to Stefan
* - added UMAX 3400 entries
* - added HP2100 settings according to Craig Smoothey
* - added LM9832 based U24
* - added Canon N650U entry
* - 0.43 - tweaked HP 2200C entries
* - added _WAF_MISC_IO5 for HP lamp switching
* - added motor profiles
* - cleanup
* - 0.44 - added EPSON 1260 and 660
* - added Genius Model strings
* - added Canon N670U entry
* - added bStepsToReverse to the HwDesc structure
* - tweaked EPSON1250 settings for TPA (thanks to Till Kamppeter)
* - 0.45 - added UMAX motor settings
* - added UMAX 5400 settings
* - added CanoScan1240 settings (thanks to Johann Philipp)
* - tweaked EPSON 1260 settings
* - removed EPSON 660 stuff
* - added Canon 1220U entry
* - added entry for Compaq S4-100
* - 0.46 - fine-tuning for the CanoScan devices
* - fixed HP2200 shading position
* - renamed to plustek-usbdevs.c
* - 0.47 - added BearPaw 1200 settings for PID 0x4001 (LM9832)
* - tweaked the LiDE20 MCLK setting for 75DPI grayscale
* - enlarged the scan-area of the UMAX3400 to 11.7"
* - added CanoScan D660U
* - 0.48 - added another incarnation of the UMAX 3400
* - added parameters for UMAX 3450 TPA
* - parameter tuning for CanoScan D660U
* - cleanup
* - 0.49 - tweaked motor settings for EPSON and CANON1200
* - added support for CanoScan LiDE25
* - 0.50 - cleanup
* - removed obsolete _WAF_BLACKFINE
* - LiDE20 does not seem to have a reliable black calibration area
* so the devices now will switch off the lamp for dark calibration
* - added Stephan Februarys' LiDE25 changes
* - fixed high-speed feature of CanoScan D660U
* - tweaked LiDE25, LiDE30 and N1220U settings
* - changed high-speed setting for UMAX 3400, due to bugreport #302317
* - fixed CanoScan N650U settings
* - fixed CanoScan N670U settings, see (bugreport #302738)
* - added high-speed setting for HP2200
* - 0.51 - tweaked CanoScan N1220U settings again
* - added settings for Syscan Travelscan 662
* - tweaked settings for Bearpaw 1200
* - fixed CanoScan LiDE20 settings, cause of various reports, seems
* Canon has built-in different motortypes
* - also fixed Motorsettings for LiDE30
*
*
* This file is part of the SANE package.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston,
* MA 02111-1307, USA.
*
* As a special exception, the authors of SANE give permission for
* additional uses of the libraries contained in this release of SANE.
*
* The exception is that, if you link a SANE library with other files
* to produce an executable, this does not by itself cause the
* resulting executable to be covered by the GNU General Public
* License. Your use of that executable is in no way restricted on
* account of linking the SANE library code into it.
*
* This exception does not, however, invalidate any other reasons why
* the executable file might be covered by the GNU General Public
* License.
*
* If you submit changes to SANE to the maintainers to be included in
* a subsequent release, you agree by submitting the changes that
* those changes may be distributed with this exception intact.
*
* If you write modifications of your own for SANE, it is your choice
* whether to permit this exception to apply to your modifications.
* If you do not wish that, delete this exception notice.
*
*/
/* the other stuff is included by plustek.c ...*/
#include "plustek-usb.h"
/** for Register 0x26
*/
#define _ONE_CH_COLOR 0x04
#define _RED_CH 0x00
#define _GREEN_CH 0x08
#define _BLUE_CH 0x10
/* Plustek Model: UT12/UT16
* KH: NS9831 + TPA + Button + NEC3799
*/
static DCapsDef Cap0x07B3_0x0017_0 =
{
{ /* Normal */
{0, 93}, /* DataOrigin (X: 0, Y: 8mm from home) */
0, -1, /* ShadingOriginY, DarkShadOrgY */
{2550, 3508}, /* Size */
{50, 50} /* MinDpi */
},
{ /* Positive */
{1040 + 15, 744 - 32},/* DataOrigin (X: 7cm + 1.8cm, Y: 8mm + 5.5cm)*/
543, -1, /* ShadingOriginY (Y: 8mm + 3.8cm) */
{473, 414}, /* Size (X: 4cm, Y: 3.5cm) */
{150, 150} /* MinDpi */
},
{ /* Negative */
{1004 + 55, 744 + 12}, /* DataOrigin (X: 7cm + 1.5cm, Y: 8mm + 5.5cm)*/
/* 533 blaustichig */
537 /* hell */
/* 543 gruenstichig */
/*543*/, -1, /* ShadingOriginY (Y: 8mm + 3.8cm) */
{567, 414}, /* Size (X: 4.8cm, Y: 3.5cm) */
{150, 150} /* MinDpi */
},
{ /* Adf */
{0, 95}, /* DataOrigin (X: 0, Y: 8mm from home) */
0, -1, /* ShadingOriginY, DarkShadOrgY */
{2550, 3508}, /* Size */
{50, 50} /* MinDpi */
},
{600, 600}, /* OpticDpi */
DEVCAPSFLAG_Positive + DEVCAPSFLAG_Negative, /* wFlags */
SENSORORDER_rgb, /* bSensorOrder */
4, /* bSensorDistance */
4, /* bButtons */
kNEC3799, /* bCCD */
0x07, /* bPCB */
_WAF_NONE, /* no workarounds or other special stuff needed */
_NO_MIO /* does not use misc I/O for lamp */
};
/* Plustek Model: U24
* Description of the entries, see above...
*/
static DCapsDef Cap0x07B3_0x0015_0 =
{
{{0, 93}, 0, -1, {2550, 3508}, { 50, 50}},
{{1040 + 15, 744 - 32}, 543, -1, {473, 414}, {150, 150}},
{{1004 + 20, 744 + 32}, 543, -1, {567, 414}, {150, 150}},
{{0, 95}, 0, -1, {2550, 3508}, { 50, 50}},
{600, 600},
0,
SENSORORDER_rgb,
4, 4, kNEC3799, 0x05, _WAF_NONE, _NO_MIO
};
/* Plustek Model: ???
* KH: NS9831 + TPA + Button + NEC3799
*/
static DCapsDef Cap0x07B3_0x0014_0 =
{
{{0, 93}, 0, -1, {2550, 3508}, { 50, 50}},
{{1040 + 15, 744 - 32}, 543, -1, {473, 414}, {150, 150}},
{{1004 + 20, 744 + 32}, 543, -1, {567, 414}, {150, 150}},
{{0, 95}, 0, -1, {2550, 3508}, { 50, 50}},
{600, 600},
0,
SENSORORDER_rgb,
4, 0, kNEC3799, 0x04, _WAF_NONE, _NO_MIO
};
/* Plustek Model: ??? and Genius ColorPage-HR6 V2
* KH: NS9831 + TPA + Button + NEC3799
*/
static DCapsDef Cap0x07B3_0x0007_0 =
{
{{0, 124}, 36, -1, {2550, 3508}, { 50, 50 }},
{{1040, 744}, 543, -1, { 473, 414 }, {150, 150}},
{{1004, 744}, 543, -1, { 567, 414 }, {150, 150}},
{{0, 95}, 0, -1, {2550, 3508}, { 50, 50 }},
{600, 600},
DEVCAPSFLAG_Positive + DEVCAPSFLAG_Negative,
SENSORORDER_rgb,
4, 5, kNEC3799, 0x07, _WAF_NONE, _NO_MIO
};
/* Plustek Model: ???
* Tokyo: NS9832 + Button + SONY548
*/
static DCapsDef Cap0x07B3_0x0005_2 =
{
{{ 0, 64}, 0, -1, {2550, 3508}, { 50, 50 }},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{600, 600},
0,
SENSORORDER_rgb,
8, 2, kSONY548, 0x05, _WAF_NONE, _NO_MIO
};
/* Genius ColorPage-HR7
* Hualien: NS9832 + TPA + Button + NEC3778
*/
static DCapsDef Cap0x07B3_0x0007_4 =
{
{{ 0, 111 - 4 }, 0, -1, {2550, 3508}, { 50, 50 }},
{{1040 + 5, 744 - 32}, 543, -1, { 473, 414 }, {150, 150}},
{{1040 - 20, 768 }, 543, -1, { 567, 414 }, {150, 150}},
{{ 0, 95 }, 0, -1, {2550, 3508}, { 50, 50 }},
{1200, 1200},
DEVCAPSFLAG_Positive + DEVCAPSFLAG_Negative,
SENSORORDER_rgb,
12, 5, kNEC3778, 0x07, _WAF_NONE, _NO_MIO
};
/* Genius ColorPage-HR7LE and ColorPage-HR6X
* Hualien: NS9832 + Button + NEC3778
*/
static DCapsDef Cap0x07B3_0x0005_4 =
{
{{ 0, 111 - 4 }, 0, -1, {2550, 3508}, {50, 50}},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{1200, 1200},
0,
SENSORORDER_rgb,
12, 5, kNEC3778, 0x05, _WAF_NONE, _NO_MIO
};
/* Plustek Model: ???, Genius ColorPage HR6A
* KH: NS9831 + TPA + Button + NEC3799
*/
static DCapsDef Cap0x07B3_0x000F_0 =
{
{{ 0, 130}, 12, -1, {2550, 3508}, { 50, 50 }},
{{1040, 744}, 543, -1, { 473, 414 }, {150, 150}},
{{1004, 744}, 543, -1, { 567, 414 }, {150, 150}},
{{ 0, 244}, 12, -1, {2550, 4200}, { 50, 50 }},
{600, 600},
DEVCAPSFLAG_Normal + DEVCAPSFLAG_Adf,
SENSORORDER_rgb,
4, 5, kNEC3799, 0x0F, _WAF_NONE, _NO_MIO
};
/* Plustek Model: ???
* KH: NS9831 + TPA + Button + NEC3799
*/
static DCapsDef Cap0x07B3_0x0013_0 =
{
{{ 0, 93}, 0, -1, {2550, 3508}, { 50, 50}},
{{1040 + 15, 744 - 32}, 543, -1, { 473, 414}, {150, 150}},
{{1004 + 30, 744 + 32}, 543, -1, { 567, 414}, {150, 150}},
{{ 0, 95}, 0, -1, {2550, 3508}, { 50, 50}},
{600, 600},
DEVCAPSFLAG_Positive + DEVCAPSFLAG_Negative,
SENSORORDER_rgb,
4, 4, kNEC3799, 0x03, _WAF_NONE, _NO_MIO
};
/* Plustek Model: U24
* KH: NS9831 + Button + NEC3799
// */
static DCapsDef Cap0x07B3_0x0011_0 =
{
{{ 0, 93}, 0, -1, {2550, 3508}, { 50, 50}},
{{1040 + 15, 744 - 32}, 543, -1, { 473, 414}, {150, 150}},
{{1004 + 20, 744 + 32}, 543, -1, { 567, 414}, {150, 150}},
{{ 0, 95}, 0, -1, {2550, 3508}, { 50, 50}},
{600, 600},
0,
SENSORORDER_rgb,
4, 4, kNEC3799, 0x01, _WAF_NONE, _NO_MIO
};
/* Plustek Model: U12
* KH: NS9831 + TPA + Button + NEC3799
*/
static DCapsDef Cap0x07B3_0x0010_0 =
{
{{ 0, 93}, 0, -1, {2550, 3508}, { 50, 50}},
{{1040 + 15, 744 - 32}, 543, -1, { 473, 414}, {150, 150}},
{{1004 + 20, 744 + 32}, 543, -1, { 567, 414}, {150, 150}},
{{ 0, 95}, 0, -1, {2550, 3508}, { 50, 50}},
{600, 600},
0,
SENSORORDER_rgb,
4, 0, kNEC3799, 0x00, _WAF_BSHIFT7_BUG, _NO_MIO
};
/* Plustek Model: ???
* KH: NS9831 + TPA + Button + NEC3778
*/
static DCapsDef Cap0x07B3_0x0013_4 =
{
{{ 0, 99 /*114*/}, 0, -1, {2550, 3508}, { 50, 50}},
{{ 1055, 744 - 84}, 543, -1, { 473, 414}, {150, 150}},
{{1004 + 20, 744 - 20}, 543, -1, { 567, 414}, {150, 150}},
{{ 0, 95}, 0, -1, {2550, 3508}, { 50, 50}},
{1200, 1200},
DEVCAPSFLAG_Positive + DEVCAPSFLAG_Negative,
SENSORORDER_rgb,
12, 4, kNEC3778, 0x03, _WAF_NONE, _NO_MIO
};
/* Plustek Model: ???
* KH: NS9831 + Button + NEC3778
*/
static DCapsDef Cap0x07B3_0x0011_4 =
{
{{ 0, 99 /*114*/}, 0, -1, {2550, 3508}, { 50, 50}},
{{ 1055, 744 - 84}, 543, -1, { 473, 414}, {150, 150}},
{{1004 + 20, 744 - 20}, 543, -1 ,{ 567, 414}, {150, 150}},
{{ 0, 95}, 0, -1, {2550, 3508}, { 50, 50}},
{1200, 1200},
0,
SENSORORDER_rgb,
12, 4, kNEC3778, 0x01, _WAF_NONE, _NO_MIO
};
/* Plustek Model: ???
* KH: NS9831 + TPA + Button + NEC3778
*/
static DCapsDef Cap0x07B3_0x0010_4 =
{
{{ 0, 99 /*114*/}, 0, -1, {2550, 3508}, { 50, 50}},
{{ 1055, 744 - 84}, 543, -1, { 473, 414}, {150, 150}},
{{1004 + 20, 744 - 20}, 543, -1, { 567, 414}, {150, 150}},
{{ 0, 95}, 0, -1, {2550, 3508}, { 50, 50}},
{1200, 1200},
0,
SENSORORDER_rgb,
12, 0, kNEC3778, 0x00, _WAF_NONE, _NO_MIO
};
/* Plustek Model: UA18?
* KH: NS9831 + TPA + Button + NEC3778
*/
static DCapsDef Cap0x07B3_0x000F_4 =
{
{{ 0, 107}, 0, -1, {2550, 3508}, { 50, 50}},
{{ 1040 + 5, 744 - 32}, 543, -1, { 473, 414}, {150, 150}},
{{1040 - 20, 768}, 543, -1, { 567, 414}, {150, 150}},
{{ 0, 244}, 0, -1, {2550, 4200}, { 50, 50}},
{1200, 1200},
DEVCAPSFLAG_Normal + DEVCAPSFLAG_Adf,
SENSORORDER_rgb,
12, 5, kNEC3778, 0x0F, _WAF_NONE, _NO_MIO
};
/* Plustek Model: ???
* KH: NS9831 + TPA + Button + NEC3778
*/
static DCapsDef Cap0x07B3_0x0016_4 =
{
{{ 0, 93}, 0, -1, {2550, 3508}, { 50, 50}},
{{ 954, 422}, 272, -1, { 624, 1940}, {150, 150}},
{{1120, 438}, 275, -1, { 304, 1940}, {150, 150}},
{{ 0, 95}, 0, -1, {2550, 3508}, { 50, 50}},
{1200, 1200},
DEVCAPSFLAG_Positive + DEVCAPSFLAG_Negative,
SENSORORDER_rgb,
12, 4, kNEC3778, 0x06, _WAF_NONE, _NO_MIO
};
/* Plustek Model: UT24
* KH: NS9832 + TPA + Button + NEC3778
*/
static DCapsDef Cap0x07B3_0x0017_4 =
{
{{ 0, 99 - 6}, 0, -1, {2550, 3508}, { 50, 50}},
{{1025 /*1055*/, 744 - 84}, 543, -1, { 473, 414}, {150, 150}},
{{1048 /*1024*/, 754/*724*/}, 543, -1, { 567, 414}, {150, 150}},
{{ 0, 95}, 0, -1, {2550, 3508}, { 50, 50}},
{1200, 1200},
DEVCAPSFLAG_Positive + DEVCAPSFLAG_Negative,
SENSORORDER_rgb,
12, 4, kNEC3778, 0x07, _WAF_NONE, _NO_MIO
};
/* Plustek Model: ???
* KH: NS9831 + Button + NEC3778
*/
static DCapsDef Cap0x07B3_0x0015_4 =
{
{{ 0, 99 - 6}, 0, -1, {2550, 3508}, { 50, 50}},
{{ 1055, 744 - 84}, 543, -1, { 473, 414}, {150, 150}},
{{1004 + 20, 744 - 20}, 543, -1, { 567, 414}, {150, 150}},
{{ 0, 95}, 0, -1, {2550, 3508}, { 50, 50}},
{1200, 1200},
0,
SENSORORDER_rgb,
12, 4, kNEC3778, 0x05, _WAF_NONE, _NO_MIO
};
/* Plustek Model: ???
* KH: NS9831 + TPA + Button + NEC3778
*/
static DCapsDef Cap0x07B3_0x0014_4 =
{
{{ 0, 99 - 6}, 0, -1, {2550, 3508}, { 50, 50}},
{{ 1055, 744 - 84}, 543, -1, { 473, 414}, {150, 150}},
{{1004 + 20, 744 - 20}, 543, -1, { 567, 414}, {150, 150}},
{{ 0, 95}, 0, -1, {2550, 3508}, { 50, 50}},
{1200, 1200},
0,
SENSORORDER_rgb,
12, 0, kNEC3778, 0x04, _WAF_NONE, _NO_MIO
};
/* Plustek Model: ??? A3 model
* KH: NS9831 + TPA + Button + SONY518
*/
static DCapsDef Cap0x07B3_0x0014_1 =
{
{{ 0, 93}, 0, -1, {3600, 5100}, { 50, 50}},
{{1040 + 15, 744 - 32}, 543, -1, { 473, 414}, {150, 150}},
{{1004 + 20, 744 + 32}, 543, -1, { 567, 414}, {150, 150}},
{{ 0, 95}, 0, -1, {2550, 3508}, { 50, 50}},
{400, 400},
0,
SENSORORDER_rgb,
8, 0, kSONY518, 0x04, _WAF_NONE, _NO_MIO
};
/* Model: ???
* KH: NS9832 + NEC3799 + 600 DPI Motor (for Brother demo only)
*/
static DCapsDef Cap0x07B3_0x0012_0 =
{
{{ 0, 93}, 0, -1, {2550, 3508}, { 50, 50}},
{{1040 + 15, 744 - 32}, 543, -1, { 473, 414}, {150, 150}},
{{1004 + 20, 744 + 32}, 543, -1, { 567, 414}, {150, 150}},
{{ 0, 95}, 0, -1, {2550, 3508}, { 50, 50}},
{600, 600},
0,
SENSORORDER_rgb,
4, 0, kNEC3799, 0x02, _WAF_NONE, _NO_MIO
};
/* Plustek Model: ???
* KH: NS9831 + TPA + Button + SONY548
*/
static DCapsDef Cap0x07B3_0x0017_2 =
{
{{ 0, 93}, 0, -1, {2550, 3508}, { 50, 50}},
{{1040 + 15, 744 - 32}, 543, -1, { 473, 414}, {150, 150}},
{{ 1004, 744}, 543, -1, { 567, 414}, {150, 150}},
{{ 0, 95}, 0, -1, {2550, 3508}, { 50, 50}},
{600, 600},
DEVCAPSFLAG_Positive + DEVCAPSFLAG_Negative,
SENSORORDER_bgr,
8, 4, kSONY548, 0x07, _WAF_NONE, _NO_MIO
};
/* Plustek Model: ???
* KH: NS9831 + TPA + Button + NEC3799
*/
static DCapsDef Cap0x07B3_0x0017_3 =
{
{{ 0, 93}, 0, -1, {2550, 3508}, { 50, 50}},
{{1040 + 15, 744 - 32}, 543, -1, { 473, 414}, {150, 150}},
{{1004 + 30, 744 + 32}, 543, -1, { 567, 414}, {150, 150}},
{{ 0, 95}, 0, -1, {2550, 3508}, { 50, 50}},
{600, 600},
DEVCAPSFLAG_Positive + DEVCAPSFLAG_Negative,
SENSORORDER_rgb,
8, 4, kNEC8861, 0x07, _WAF_NONE, _NO_MIO
};
/* Model: HP Scanjet 2100c */
static DCapsDef Cap0x03F0_0x0505 =
{
{{ 0, 65}, 10, -1, {2550, 3508}, { 50, 50}},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{600, 600},
0,
SENSORORDER_rgb,
4, 0, kNECSLIM, 0x00, _WAF_NONE, _NO_MIO
};
/* Model: HP Scanjet 2200c (thanks to Stefan Nilsen)
* NS9832 + 2 Buttons + NEC3799 + 600 DPI Motor
*/
static DCapsDef Cap0x03F0_0x0605 =
{
/* DataOrigin (x, y), ShadingOriginY */
{{ 0, 209}, 40, -1, {2550, 3508}, { 50, 50}},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{600, 600},
0,
SENSORORDER_rgb,
4, 2, kNECSLIM, 0x00, _WAF_NONE, _NO_MIO
};
/* Mustek BearPaw 1200 (thanks to Henning Meier-Geinitz)
* NS9831 + 5 Buttons + NEC3798
*/
static DCapsDef Cap0x0400_0x1000_0 =
{
{{ 0, 130}, 20, -1, {2550, 3508}, { 50, 50 }},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{600, 600},
0,
SENSORORDER_rgb,
8,
5, kNEC8861, 0x00,
_WAF_MISC_IO_LAMPS | _WAF_USE_ALT_DESC,
_MIO5
};
/* Mustek BearPaw 2400
* NS9832 + 5 Buttons + SONY548
*/
static DCapsDef Cap0x0400_0x1001_0 =
{
{{ 0, 130/*209*/}, 35/*20*/, -1, {2550, 3508}, { 50, 50 }},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{ 600, 600 }, /*{ 1200, 1200 }, */
0,
SENSORORDER_rgb,
4,/*16*/ /* sensor distance */
5, /* number of buttons */
kSONY548, /* CCD type */
0, _WAF_USE_ALT_DESC, _NO_MIO
};
/* Epson Perfection/Photo1250 (thanks to Gene Heskett and Reinhard Max)
* Epson Perfection/Photo1260 (thanks to Till Kamppeter)
* NS9832 + 4 Buttons + CCD????
*/
static DCapsDef Cap0x04B8_0x010F =
{
/* Normal */
{{ 25, 85}, 10, -1, {2550, 3508}, { 100, 100 }},
/* Positive */
{{ 1100, 972}, 720, -1, { 473, 414}, { 150, 150 }},
/* Negative */
{{ 1116, 1049}, 720, -1, { 567, 414}, { 150, 150 }},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{1200, 1200},
0,
SENSORORDER_rgb,
8, /* sensor distance */
4, /* number of buttons */
kEPSON, /* use default settings during calibration */
0, /* not used here... */
_WAF_MISC_IO_LAMPS, /* use miscio 6 for lamp switching */
_MIO6 + _TPA(_MIO1) /* and miscio 1 for optional TPA */
};
/* Umax 3400/3450
*/
static DCapsDef Cap0x1606_0x0060 =
{
/* Normal */
{{ 30, 105 }, 15, -1, {2550, 3508}, { 100, 100 }},
/* Positive */
{{ 700, 760 }, 650, -1, {1200, 1500}, { 150, 150 }},
/* Negative */
{{ 700, 760 }, 650, -1, {1200, 1500}, { 150, 150 }},
{{ 0, 0 }, 0, -1, {0, 0}, { 0, 0 }},
{600, 600},
DEVCAPSFLAG_LargeTPA,
SENSORORDER_bgr,
8, /* sensor distance */
4, /* number of buttons */
kNEC8861, /* use default settings during calibration */
0, /* not used here... */
_WAF_MISC_IO_LAMPS, /* use miscio 3 for lamp switching */
_MIO3 + _TPA(_MIO6) /* and miscio 6 for optional TPA */
};
/* Umax 5400
*/
static DCapsDef Cap0x1606_0x0160 =
{
{{ 30, 165}, 0, -1, {2550, 3508}, {100, 100}},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, -1, {0, 0}, { 0, 0 }},
{1200, 1200},
0,
SENSORORDER_bgr,
12, /* sensor distance */
4, /* number of buttons */
kNEC3778, /* use default settings during calibration */
0, /* not used here... */
_WAF_MISC_IO_LAMPS, /* use miscio 3 for lamp switching */
_MIO3
};
/* Canon N650U/N656U
*/
static DCapsDef Cap0x04A9_0x2206 =
{
{{ 0, 90}, 45, 10, {2550, 3508}, {75, 75}},
{{ 0, 0}, 0, 0, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, 0, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, 0, {0, 0}, { 0, 0 }},
{600, 600},
0,
SENSORORDER_rgb,
8, /* sensor distance */
1, /* number of buttons */
kCIS650, /* use default settings during calibration */
0, /* not used here... */
_WAF_MISC_IO_LAMPS, _NO_MIO
};
/* Canon N1220U
*/
static DCapsDef Cap0x04A9_0x2207 =
{
{{ 0, 85}, 45, 10, {2550, 3508}, {75, 75}},
{{ 0, 0}, 0, 0, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, 0, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, 0, {0, 0}, { 0, 0 }},
{1200, 1200},
0,
SENSORORDER_rgb,
16, /* sensor distance */
1, /* number of buttons */
kCIS1220, /* use default settings during calibration */
0, /* not used here... */
_WAF_MISC_IO_LAMPS, _NO_MIO
};
/* Canon D660U
*/
static DCapsDef Cap0x04A9_0x2208 =
{
{{ 45, 125}, 15, -1, {2550, 3508}, { 50, 50}},
{{1060, 744}, 510, -1, { 473, 414}, {150, 150}},
{{1082, 842}, 610, -1, { 567, 414}, {150, 150}},
{{ 0, 0}, 0, 0, { 0, 0}, { 0, 0}},
{600, 600},
DEVCAPSFLAG_Positive + DEVCAPSFLAG_Negative,
SENSORORDER_rgb,
4,
1,
kNEC8861, /* use default settings during calibration */
0,
(_WAF_MISC_IO_LAMPS | _WAF_BIN_FROM_COLOR | _WAF_GRAY_FROM_COLOR),
_MIO5 + _TPA(_MIO6)
};
/* Canon N670U/N676U/LiDE20
*/
static DCapsDef Cap0x04A9_0x220D =
{
{{ 0, 110}, 45, -1, {2550, 3508}, {75, 75}},
{{ 0, 0}, 0, 0, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, 0, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, 0, {0, 0}, { 0, 0 }},
{600, 600},
0,
SENSORORDER_rgb,
8, /* sensor distance */
3, /* number of buttons */
kCIS670,
0, /* not used here... */
_WAF_MISC_IO_LAMPS, _NO_MIO
};
/* Canon N1240U/LiDE30
*/
static DCapsDef Cap0x04A9_0x220E =
{
{{ 0, 100}, 50, 10, {2550, 3508}, {75, 75}},
{{ 0, 0}, 0, 0, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, 0, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, 0, {0, 0}, { 0, 0 }},
{1200, 1200},
0,
SENSORORDER_rgb,
16, /* sensor distance */
3, /* number of buttons */
kCIS1240, /* use default settings during calibration */
0, /* not used here... */
_WAF_MISC_IO_LAMPS, _NO_MIO
};
/* Canon LiDE25
*/
static DCapsDef Cap0x04A9_0x2220 =
{
{{ 0, 100}, 50, 10, {2550, 3508}, {75, 75}},
{{ 0, 0}, 0, 0, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, 0, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, 0, {0, 0}, { 0, 0 }},
{1200, 1200},
0,
SENSORORDER_rgb,
16, /* sensor distance */
3, /* number of buttons */
kCIS1240, /* use default settings during calibration */
0, /* not used here... */
_WAF_MISC_IO_LAMPS, _NO_MIO
};
/* Syscan TravelScan 662 A6 sheet-fed scanner
*/
static DCapsDef Cap0x0A82_0x6620 =
{
{{ 0, 0}, 100, -1, {1226, 3508}, { 75, 75 }},
{{ 0, 0}, 0, 0, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, 0, {0, 0}, { 0, 0 }},
{{ 0, 0}, 0, 0, {0, 0}, { 0, 0 }},
{600, 600},
DEVCAPSFLAG_SheetFed,
SENSORORDER_rgb,
8,
1,
kNEC8861, /* use default settings during calibration */
0, /* not used here... */
(_WAF_MISC_IO_LAMPS | _WAF_MISC_IO_BUTTONS |
_WAF_BIN_FROM_COLOR | _WAF_GRAY_FROM_COLOR),
_MIO5 + _PORT1
};
/******************* additional Hardware descriptions ************************/
/** U24, UT12 and UT16
*/
static HWDef Hw0x07B3_0x0017_0 =
{
1.5, /* dMaxMotorSpeed */
1.2, /* dMaxMoveSpeed */
0.0, /* dHighSpeed */
9, /* dIntegrationTimeLowLamp */
9, /* dIntegrationTimeHighLamp */
300, /* wMotorDpi (Full step DPI) */
512, /* wRAMSize (KB) */
4, /* dMinIntegrationTimeLowres (ms) */
5, /* dMinIntegrationTimeHighres (ms) */
3000, /* wGreenPWMDutyCycleLow */
4095, /* wGreenPWMDutyCycleHigh */
0x02, /* bSensorConfiguration (0x0b) */
0x04, /* bReg_0x0c */
0x37, /* bReg_0x0d */
0x13, /* bReg_0x0e */
/* bReg_0x0f_Mono [10] (0x0f to 0x18) */
{2, 7, 0, 1, 0, 0, 0, 0, 4, 0},
/* bReg_0x0f_Color [10] (0x0f to 0x18) */
{5, 23, 1, 3, 0, 0, 0, 12, 10, 22},
_GREEN_CH, /* bReg_0x26 color mode - bits 4 and 5 */
0, /* bReg 0x27 color mode */
1, /* bReg 0x29 illumination mode */
/* illumination mode settings (not used for CCD devices) */
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
1, /* StepperPhaseCorrection (0x1a & 0x1b) */
14, /* 15, bOpticBlackStart (0x1c) */
62, /* 60, bOpticBlackEnd (0x1d) */
110, /* 65, wActivePixelsStart (0x1e & 0x1f) */
5400, /* 5384 ,wLineEnd (0x20 & 0x21) */
0, /* red lamp on (reg 0x2c + 0x2d) */
16383, /* red lamp off (reg 0x2e + 0x2f) */
0, /* green lamp on (reg 0x30 + 0x31) */
0, /* green lamp off (reg 0x32 + 0x33) */
0, /* blue lamp on (reg 0x34 + 0x35) */
16383, /* blue lamp off (reg 0x36 + 0x37) */
/* Misc */
3, /* bReg_0x45 */
0, /* wStepsAfterPaperSensor2 (0x4c & 0x4d) */
0x1e, /* bstepsToReverse reg 0x50) */
0xa8, /* 0xfc -bReg_0x51 */
0, /* bReg_0x54 */
0xff, /* 0xa3 - bReg_0x55 */
64, /* bReg_0x56 */
20, /* bReg_0x57 */
0x0d, /* bReg_0x58 */
0x22, /* bReg_0x59 */
0x82, /* bReg_0x5a */
0x88, /* bReg_0x5b */
0, /* bReg_0x5c */
0, /* bReg_0x5d */
0, /* bReg_0x5e */
_LM9832, /* chip type */
MODEL_KaoHsiung,/* motorModel */
1.0
};
/** Genius ColorPage-HR6 V2 and ColorPage-HR6X
*/
static HWDef Hw0x07B3_0x0007_0 =
{
1.5, 1.2, 0.0,
9, 9,
300,
512,
4, 5,
3000, 4095,
0x02, 0x14, 0x27, 0x13,
{2, 7, 0, 1, 0, 0, 0, 0, 4, 0},
{5, 23, 1, 3, 0, 0, 0, 6, 10, 22},
_GREEN_CH,
0,
1,
/* illumination mode settings (not used for CCD devices) */
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
1,
14,
62,
110,
5384,
0,
16383,
0,
0,
0,
16383,
3,
0,
0x1e,
0xa8,
0,
0xff,
64,
20,
0x0d, 0x88, 0x28, 0x3b,
0, 0, 0,
_LM9832,
MODEL_HuaLien,
1.0
};
/** unknown
*/
static HWDef Hw0x07B3_0x0007_2 =
{
1.4, 1.2, 0.0,
9, 9,
600,
512,
4, 5,
3000, 4095,
0x02, 0x3f, 0x2f, 0x36,
{2, 7, 0, 1, 0, 0, 0, 0, 4, 0},
{7, 20, 1, 4, 7, 10, 0, 6, 12, 0},
_GREEN_CH,
0,
1,
/* illumination mode settings (not used for CCD devices) */
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
1,
16,
64,
152,
5416,
0,
16383,
0,
0,
0,
16383,
3,
0,
0x1e,
0xfc,
0,
0xff,
64,
20,
0x0d, 0x88, 0x28, 0x3b,
0, 0, 0,
_LM9832,
MODEL_Tokyo600,
1.0
};
/** Genius ColorPage-HR7 and ColorPage-HR7LE
*/
static HWDef Hw0x07B3_0x0007_4 =
{
1.1, 0.9, 0.0,
12, 12,
600,
2048,
8, 8,
4095, 4095,
0x06, 0x30, 0x2f, 0x2a,
{2, 7, 5, 6, 6, 7, 0, 0, 0, 5},
{20, 4, 13, 16, 19, 22, 0, 6, 23, 11},
_GREEN_CH,
0,
1,
/* illumination mode settings (not used for CCD devices) */
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
1,
13,
62,
304,
10684,
0,
16383,
0,
0,
0,
16383,
3,
0,
0x1e,
0xa8,
0,
0xff,
24,
40,
0x0d, 0x88, 0x28, 0x3b,
0, 0, 0,
_LM9832,
MODEL_HuaLien,
1.0
};
/** Genius ColorPage-HR6A
*/
static HWDef Hw0x07B3_0x000F_0 =
{
1.5, 1.0, 0.0,
9, 9,
300,
512,
4, 5,
3000, 4095,
0x02, 0x14, 0x27, 0x13,
{2, 7, 0, 1, 0, 0, 0, 0, 4, 0},
{5, 23, 1, 3, 0, 0, 0, 6, 10, 22},
_GREEN_CH,
0,
1,
/* illumination mode settings (not used for CCD devices) */
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
1,
14,
62,
110,
5384,
0,
16383,
0,
0,
0,
16383,
3,
0,
0x1e,
0xa8,
0,
0xff,
64,
20,
0x05, 0x88, 0x08, 0x3b,
0, 0, 0,
_LM9832,
MODEL_HuaLien,
1.0
};
/** U12 and U24
*/
static HWDef Hw0x07B3_0x0013_0 =
{
1.5, 1.2, 0.0,
9, 9,
300,
512,
4, 5,
3000, 4095,
0x02, 0x04, 0x37, 0x13,
{2, 7, 0, 1, 0, 0, 0, 0, 4, 0},
{5, 23, 1, 3, 0, 0, 0, 12, 10, 22},
_GREEN_CH,
0,
1,
/* illumination mode settings (not used for CCD devices) */
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
1,
14,
62,
110,
5400,
0,
16383,
0,
0,
0,
16383,
3,
0,
0x1e,
0xa8,
0,
0xff,
64,
20,
0x0d, 0x22, 0x82, 0x88,
0, 0, 0,
_LM9831,
MODEL_KaoHsiung,
1.0
};
/** unknown
*/
static HWDef Hw0x07B3_0x0013_4 =
{
1.0, 0.9, 0.0,
12, 12,
600,
2048,
8, 8,
4095, 4095,
0x06, 0x20, 0x2f, 0x2a,
{2, 7, 5, 6, 6, 7, 0, 0, 0, 5},
{20, 4, 13, 16, 19, 22, 0, 0, 23, 11},
_GREEN_CH,
0,
1,
/* illumination mode settings (not used for CCD devices) */
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
1,
13,
62,
320,
10684,
0,
16383,
0,
0,
0,
16383,
3,
0,
0x1e,
0xa8,
0,
0xff,
10,
48,
0x0d, 0x22, 0x82, 0x88,
0, 0, 0,
_LM9831,
MODEL_KaoHsiung,
1.0
};
/** unknown
*/
static HWDef Hw0x07B3_0x000F_4 =
{
1.1, 0.9, 0.0,
12, 12,
600,
2048,
8, 8,
4095, 4095,
0x06, 0x30, 0x2f, 0x2a,
{2, 7, 5, 6, 6, 7, 0, 0, 0, 5},
{20, 4, 13, 16, 19, 22, 0, 6, 23, 11},
_GREEN_CH,
0,
1,
/* illumination mode settings (not used for CCD devices) */
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
1,
13,
62,
304,
10684,
0,
16383,
0,
0,
0,
16383,
3,
0,
0x1e,
0xa8,
0,
0xff,
24,
40,
0x05, 0x88, 0x08, 0x3b,
0, 0, 0,
_LM9832,
MODEL_HuaLien,
1.0
};
/** unknown
*/
static HWDef Hw0x07B3_0x0016_4 =
{
1.0, 0.9, 0.0,
12, 12,
600,
2048,
8, 8,
4095, 4095,
0x06, 0x20, 0x2f, 0x2a,
{2, 7, 5, 6, 6, 7, 0, 0, 0, 5},
{20, 4, 13, 16, 19, 22, 0, 0, 23, 11},
_GREEN_CH,
0,
1,
/* illumination mode settings (not used for CCD devices) */
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
1,
13,
62,
320,
10684,
0,
16383,
0,
0,
0,
16383,
3,
0,
0x1e,
0xa8,
0,
0xff,
10,
48,
0x0d, 0x22, 0x82, 0x88,
0, 0, 0,
_LM9832,
MODEL_KaoHsiung,
1.0
};
/** Plustek OpticPro UT24 and others...
*/
static HWDef Hw0x07B3_0x0017_4 =
{
1.0, 0.9, 0.0,
12, 12,
600,
2048,
8, 8,
4095, 4095,
0x06, 0x20, 0x2f, 0x2a,
{2, 7, 5, 6, 6, 7, 0, 0, 0, 5},
{20, 4, 13, 16, 19, 22, 0, 0, 23, 11},
_GREEN_CH,
0,
1,
/* illumination mode settings (not used for CCD devices) */
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
1,
13,
62,
320,
10684,
0,
16383,
0,
0,
0,
16383,
3,
0,
0x1e,
0xa8,
0,
0xff,
10,
48,
0x0d, 0x22, 0x82, 0x88,
0, 0, 0,
_LM9832,
MODEL_KaoHsiung,
1.0
};
/** unknown
*/
static HWDef Hw0x07B3_0x0017_1 =
{
1.5, 1.5, 0.0,
9, 9,
200,
2048,
4, 5,
3000, 4095,
0x02, 0x08, 0x2f, 0x36,
{2, 7, 0, 1, 0, 0, 0, 0, 4, 0},
{5, 23, 1, 4, 7, 10, 0, 0, 10, 12},
_GREEN_CH,
0,
1,
/* illumination mode settings (not used for CCD devices) */
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
1,
15,
60,
110,
5415,
0,
16383,
0,
0,
0,
16383,
3,
0,
0x1e,
0xa8,
0,
0xff,
64,
20,
0x0d, 0x22, 0x82, 0x88,
0, 0, 0,
_LM9832,
MODEL_KaoHsiung,
1.0
};
/** unknown
*/
static HWDef Hw0x07B3_0x0012_0 =
{
1.5, 1.4, 0.0,
9, 9,
600,
2048,
4, 5,
3000, 4095,
0x02, 0x04, 0x37, 0x13,
{2, 7, 0, 1, 0, 0, 0, 0, 4, 0},
{5, 23, 1, 3, 0, 0, 0, 12, 10, 22},
_GREEN_CH,
0,
1,
/* illumination mode settings (not used for CCD devices) */
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
1,
14,
62,
110,
5400,
0,
16383,
0,
0,
0,
16383,
3,
0,
0x1e,
0xa8,
0,
0xff,
64,
20,
0x0d, 0x22, 0x82, 0x88,
0, 0, 0,
_LM9832,
MODEL_KaoHsiung,
1.0
};
/** unknown
*/
static HWDef Hw0x07B3_0x0017_2 =
{
1.5, 1.2, 0.0,
9, 9,
300,
512,
4, 5,
3000, 4095,
0x02, 0, 0x2f, 0x36,
{2, 7, 0, 1, 0, 0, 0, 0, 4, 0},
{5, 0, 1, 4, 7, 10, 0, 0, 12, 0},
_GREEN_CH,
0,
1,
/* illumination mode settings (not used for CCD devices) */
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
1,
16,
64,
110,
5416,
0,
16383,
0,
0,
0,
16383,
3,
0,
0x1e,
0xa8,
0,
0xff,
64,
20,
0x0d, 0x22, 0x82, 0x88,
0, 0, 0,
_LM9832,
MODEL_KaoHsiung,
1.0
};
/** unknown
*/
static HWDef Hw0x07B3_0x0017_3 =
{
1.5, 1.2, 0.0,
9, 9,
300,
512,
4, 5,
3000, 4095,
0x02, 0x04, 0x37, 0x13,
{2, 7, 0, 1, 0, 0, 0, 0, 4, 0},
{5, 23, 1, 4, 7, 10, 0, 0, 11, 23},
_GREEN_CH,
0,
1,
/* illumination mode settings (not used for CCD devices) */
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
1,
14,
62,
110,
5400,
0,
16383,
0,
0,
0,
16383,
3,
0,
0x1e,
0xa8,
0,
0xff,
64,
20,
0x0d, 0x22, 0x82, 0x88,
0, 0, 0,
_LM9832,
MODEL_KaoHsiung,
1.0
};
/** HP Scanjet 2100C
*/
static HWDef Hw0x03F0_0x0505 =
{
1.05, /* dMaxMotorSpeed */
1.05, /* dMaxMoveSpeed */
0.0, /* dHighSpeed */
6, /* dIntegrationTimeLowLamp */
8, /* dIntegrationTimeHighLamp */
600, /* wMotorDpi (Full step DPI) */
512, /* wRAMSize (KB) */
6, /* dMinIntegrationTimeLowres (ms) */
6, /* dMinIntegrationTimeHighres (ms) */
0, /* wGreenPWMDutyCycleLow */
0, /* wGreenPWMDutyCycleHigh */
0x02, /* bSensorConfiguration (0x0b) */
0x00, /* bReg_0x0c */
0x2F, /* bReg_0x0d */
0x13, /* bReg_0x0e */
/* bReg_0x0f_Mono[10] (0x0f to 0x18) */
{ 0x02, 0x07, 0x01, 0x02, 0x02, 0x03, 0x00, 0x00, 0x04, 0x07 },
/* bReg_0x0f_Color[10] (0x0f to 0x18) */
{ 0x08, 0x17, 0x00, 0x03, 0x08, 0x0b, 0x00, 0x00, 0x0a, 0x14 },
_GREEN_CH, /* bReg_0x26 color mode - bits 4 and 5 */
0, /* bReg 0x27 color mode */
1, /* bReg 0x29 illumination mode */
/* illumination mode settings (not used for CCD devices) */
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
1, /* StepperPhaseCorrection (0x1a & 0x1b) */
15, /* bOpticBlackStart (0x1c) */
50, /* bOpticBlackEnd (0x1d) */
140, /* wActivePixelsStart (0x1e & 0x1f) */
5414, /* wLineEnd=(0x20 & 0x21) */
1, /* red lamp on (reg 0x2c + 0x2d) */
16383, /* red lamp off (reg 0x2e + 0x2f) */
16383, /* green lamp on (reg 0x30 + 0x31) */
1, /* green lamp off (reg 0x32 + 0x33) */
16383, /* blue lamp on (reg 0x34 + 0x35) */
1, /* blue lamp off (reg 0x36 + 0x37) */
/* Misc */
0x13, /* bReg_0x45 */
0, /* wStepsAfterPaperSensor2 (0x4c & 0x4d) */
0x1e, /* steps to reverse on buffer full reg 0x50 */
0xfc, /* 0xa8 -bReg_0x51 */
0, /* bReg_0x54 */
0x18, /* bReg_0x55 */
8, /* bReg_0x56 */
60, /* bReg_0x57 */
0x0d, /* bReg_0x58 */
0xaa, /* bReg_0x59 */
0xba, /* bReg_0x5a */
0xbb, /* bReg_0x5b */
0, /* bReg_0x5c */
0, /* bReg_0x5d */
0, /* bReg_0x5e */
_LM9831,
MODEL_HP,
1.0
};
/** HP Scanjet 2200C */
static HWDef Hw0x03F0_0x0605 =
{
1.05, /* dMaxMotorSpeed */
1.05, /* dMaxMoveSpeed */
2.2, /* dHighSpeed */
6, /* dIntegrationTimeLowLamp */
8, /* dIntegrationTimeHighLamp */
600, /* ok wMotorDpi (Full step DPI) */
512, /* wRAMSize (KB) */
6, /* dMinIntegrationTimeLowres (ms) */
6, /* dMinIntegrationTimeHighres (ms) */
0, /* wGreenPWMDutyCycleLow */
0, /* wGreenPWMDutyCycleHigh */
0x02, /* bSensorConfiguration (0x0b) */
0x04, /* bReg_0x0c */
0x2F, /* bReg_0x0d */
0x1F, /* bReg_0x0e */
/* bReg_0x0f_Mono[10] (0x0f to 0x18) */
{ 0x02, 0x07, 0x01, 0x02, 0x02, 0x03, 0x00, 0x00, 0x04, 0x07 },
/* bReg_0x0f_Color[10] (0x0f to 0x18) */
{ 0x08, 0x17, 0x00, 0x03, 0x08, 0x0b, 0x00, 0x00, 0x0a, 0x14 },
_GREEN_CH, /* bReg_0x26 color mode - bits 4 and 5 */
0, /* bReg 0x27 color mode */
1, /* bReg 0x29 illumination mode */
/* illumination mode settings (not used for CCD devices)*/
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
1, /* StepperPhaseCorrection (0x1a & 0x1b) */
14, /* bOpticBlackStart (0x1c) */
63, /* bOpticBlackEnd (0x1d) */
140, /* wActivePixelsStart (0x1e & 0x1f) */
5367, /* wLineEnd=(0x20 & 0x21) */
1, /* red lamp on (reg 0x2c + 0x2d) */
16383, /* red lamp off (reg 0x2e + 0x2f) */
16383, /* green lamp on (reg 0x30 + 0x31) */
1, /* green lamp off (reg 0x32 + 0x33) */
16383, /* blue lamp on (reg 0x34 + 0x35) */
1, /* blue lamp off (reg 0x36 + 0x37) */
/* Misc */
0x13, /* bReg_0x45 */
0, /* wStepsAfterPaperSensor2 (0x4c & 0x4d) */
0x1e, /* steps to reverse on buffer full (0x50) */
0xfc, /* 0xa8 -bReg_0x51 */
0, /* bReg_0x54 */
0x18, /* bReg_0x55 */
8, /* bReg_0x56 */
60, /* bReg_0x57 */
0x0d, /* bReg_0x58 */
0xcc, /* bReg_0x59 */
0xbc, /* bReg_0x5a */
0xbb, /* bReg_0x5b */
0, /* bReg_0x5c */
0, /* bReg_0x5d */
0, /* bReg_0x5e */
_LM9832,
MODEL_HP,
1.0
};
/** Mustek BearPaw 1200 */
static HWDef Hw0x0400_0x1000_0 =
{
1.75, /* ok dMaxMotorSpeed */
1.25, /* ok dMaxMoveSpeed */
0.0, /* ok dHighSpeed */
12, /* ok dIntegrationTimeLowLamp */
12, /* ok dIntegrationTimeHighLamp */
600, /* ok wMotorDpi (Full step DPI) */
512, /* ok wRAMSize (KB) */
9, /* ok dMinIntegrationTimeLowres (ms) */
9, /* ok dMinIntegrationTimeHighres (ms) */
1169, /* ok wGreenPWMDutyCycleLow (reg 0x2a + 0x2b) */
1169, /* ok wGreenPWMDutyCycleHigh (reg 0x2a + 0x2b) */
0x02, /* ok bSensorConfiguration (0x0b) */
0x7c, /* ok sensor control settings (reg 0x0c) */
0x3f, /* ok sensor control settings (reg 0x0d) */
0x15, /* ok sensor control settings (reg 0x0e) */
/* ok mono (reg 0x0f to 0x18) */
{ 0x04, 0x07, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x03, 0x06},
/* ok color (reg 0x0f to 0x18) */
{ 0x04, 0x16, 0x01, 0x02, 0x05, 0x06, 0x00, 0x00, 0x0a, 0x16},
_GREEN_CH, /* bReg_0x26 color mode - bits 4 and 5 */
0, /* bReg 0x27 color mode */
1, /* bReg 0x29 illumination mode */
/* illumination mode settings (not used for CCD devices)*/
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
257, /* ok StepperPhaseCorrection (reg 0x1a + 0x1b) */
0x0e, /* ok bOpticBlackStart (reg 0x1c) */
0x1d, /* ok bOpticBlackEnd (reg 0x1d) */
140, /* ok wActivePixelsStart (reg 0x1e + 0x1f) */
5369, /* ok wLineEnd (reg 0x20 + 0x21) */
0, /* red lamp on (reg 0x2c + 0x2d) */
16383, /* red lamp off (reg 0x2e + 0x2f) */
0, /* green lamp on (reg 0x30 + 0x31) */
0, /* green lamp off (reg 0x32 + 0x33) */
0, /* blue lamp on (reg 0x34 + 0x35) */
16383, /* blue lamp off (reg 0x36 + 0x37) */
0x13, /* ok stepper motor control (reg 0x45) */
0, /* wStepsAfterPaperSensor2 (reg 0x4c + 0x4d) */
0x1e, /* steps to reverse on buffer full (reg 0x50) */
0xfc, /* ok acceleration profile (reg 0x51) */
0, /* ok lines to process (reg 0x54) */
0x13, /* ok kickstart (reg 0x55) */
0x03, /* ok pwm freq (reg 0x56) */
0x20, /* ok pwm duty cycle (reg 0x57) */
0x0d, /* ok Paper sense (reg 0x58) */
0x44, /* ok misc io12 (reg 0x59) */
0x44, /* ok misc io34 (reg 0x5a) */
0x16, /* ok misc io56 (reg 0x5b) */
0, /* ok test mode ADC Output CODE MSB (reg 0x5c) */
0, /* ok test mode ADC Output CODE LSB (reg 0x5d) */
0, /* ok test mode (reg 0x5e) */
_LM9831,
MODEL_MUSTEK600,
1.5
};
/** Mustek BearPaw 1200 (LM9832) */
static HWDef Hw0x0400_0x1001_1 =
{
1.25, /* ok dMaxMotorSpeed */
1.25, /* ok dMaxMoveSpeed */
0.0, /* dHighSpeed */
12, /* ok dIntegrationTimeLowLamp */
12, /* ok dIntegrationTimeHighLamp */
600, /* ok wMotorDpi (Full step DPI) */
512, /* ok wRAMSize (KB) */
9, /* ok dMinIntegrationTimeLowres (ms) */
9, /* ok dMinIntegrationTimeHighres (ms) */
1169, /* ok wGreenPWMDutyCycleLow (reg 0x2a + 0x2b) */
1169, /* ok wGreenPWMDutyCycleHigh (reg 0x2a + 0x2b) */
0x02, /* ok bSensorConfiguration (0x0b) */
0x7c, /* ok sensor control settings (reg 0x0c) */
0x3f, /* ok sensor control settings (reg 0x0d) */
0x15, /* ok sensor control settings (reg 0x0e) */
/* ok mono (reg 0x0f to 0x18) */
{ 0x04, 0x07, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x03, 0x06},
/* ok color (reg 0x0f to 0x18) */
{ 0x04, 0x16, 0x01, 0x02, 0x05, 0x06, 0x00, 0x00, 0x0a, 0x16},
_GREEN_CH, /* bReg_0x26 color mode - bits 4 and 5 */
0, /* bReg 0x27 color mode */
1, /* bReg 0x29 illumination mode */
/* illumination mode settings (not used for CCD devices)*/
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
257, /* ok StepperPhaseCorrection (reg 0x1a + 0x1b) */
0x0e, /* ok bOpticBlackStart (reg 0x1c) */
0x1d, /* ok bOpticBlackEnd (reg 0x1d) */
140, /* ok wActivePixelsStart (reg 0x1e + 0x1f) */
5369, /* ok wLineEnd (reg 0x20 + 0x21) */
0, /* red lamp on (reg 0x2c + 0x2d) */
16383, /* red lamp off (reg 0x2e + 0x2f) */
0, /* green lamp on (reg 0x30 + 0x31) */
0, /* green lamp off (reg 0x32 + 0x33) */
0, /* blue lamp on (reg 0x34 + 0x35) */
16383, /* blue lamp off (reg 0x36 + 0x37) */
0x13, /* ok stepper motor control (reg 0x45) */
0, /* wStepsAfterPaperSensor2 (reg 0x4c + 0x4d) */
0x1e, /* steps to reverse on buffer full (reg 0x50) */
0xfc, /* ok acceleration profile (reg 0x51) */
0, /* ok lines to process (reg 0x54) */
0x13, /* ok kickstart (reg 0x55) */
0x03, /* ok pwm freq (reg 0x56) */
0x20, /* ok pwm duty cycle (reg 0x57) */
0x0d, /* ok Paper sense (reg 0x58) */
0x44, /* ok misc io12 (reg 0x59) */
0x44, /* ok misc io34 (reg 0x5a) */
0x16, /* ok misc io56 (reg 0x5b) */
0, /* ok test mode ADC Output CODE MSB (reg 0x5c) */
0, /* ok test mode ADC Output CODE LSB (reg 0x5d) */
0, /* ok test mode (reg 0x5e) */
_LM9832,
MODEL_MUSTEK600,
1.5
};
/** BearPaw 2400 */
static HWDef Hw0x0400_0x1001_0 =
{
1.0/*1.8*/, /* ok dMaxMotorSpeed */
0.9/*1.8*/, /* ok dMaxMoveSpeed */
0.0, /* ok dHighSpeed */
12, /* ok dIntegrationTimeLowLamp */
12, /* ok dIntegrationTimeHighLamp */
1200 /* 600*/ , /* ok wMotorDpi (Full step DPI) */
2048, /* ok wRAMSize (KB) */
9, /* ok dMinIntegrationTimeLowres (ms) */
9, /* ok dMinIntegrationTimeHighres (ms) */
1169, /* ok wGreenPWMDutyCycleLow (reg 0x2a + 0x2b) */
1169, /* ok wGreenPWMDutyCycleHigh (reg 0x2a + 0x2b) */
0x02 /*0x06*/, /* ok bSensorConfiguration (0x0b) */
0x3c, /* ok sensor control settings (reg 0x0c) */
0x3f, /* ok sensor control settings (reg 0x0d) */
0x11, /* ok sensor control settings (reg 0x0e) */
/* ok mono (reg 0x0f to 0x18) */
{2, 7, 0, 1, 0, 0, 0, 0, 4, 0},
/* {5, 14, 12, 15, 18, 21, 0, 0, 0, 9 },*/
{1, 4, 4, 5, 6, 7, 0, 0, 0, 3 },
_GREEN_CH, /* bReg_0x26 color mode - bits 4 and 5 */
0, /* bReg 0x27 color mode */
1, /* bReg 0x29 illumination mode */
/* illumination mode settings (not used for CCD devices)*/
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
257, /* StepperPhaseCorrection (reg 0x1a + 0x1b) */
13, /* bOpticBlackStart (reg 0x1c) */
60, /* bOpticBlackEnd (reg 0x1d) */
10, /* wActivePixelsStart (reg 0x1e + 0x1f) */
5416 /* 11000*/, /* wLineEnd (reg 0x20 + 0x21) */
1, /* ok red lamp on (reg 0x2c + 0x2d) */
16383, /* ok red lamp off (reg 0x2e + 0x2f) */
1, /* ok green lamp on (reg 0x30 + 0x31) */
16383, /* ok green lamp off (reg 0x32 + 0x33) */
1, /* ok blue lamp on (reg 0x34 + 0x35) */
16383, /* ok blue lamp off (reg 0x36 + 0x37) */
0x03, /* ok stepper motor control (reg 0x45) */
0, /* wStepsAfterPaperSensor2 (reg 0x4c + 0x4d) */
0x1e, /* steps to reverse on buffer full (reg 0x50) */
0xfc, /* ok acceleration profile (reg 0x51) */
0x03, /* ok lines to process (reg 0x54) */
0x13, /* Kickstart 0x55 */
2, /* PWM frequency 0x56 */
32, /* PWM duty cycle 0x57 */
0x15, /* paper sense 0x58 */
0x44, /* misc I/O 0x59 */
0x44, /* misc I/O 0x5a, */
0x46, /* misc I/O 0x5b */
0, 0, 0,/* test registers, set to 0 (0x5c, 0x5d, 0x5e) */
_LM9832,
MODEL_MUSTEK1200,
1.0
};
/** EPSON Perfection/Photo 1250 */
static HWDef Hw0x04B8_0x010F =
{
0.8, /* dMaxMotorSpeed */
0.8, /* dMaxMoveSpeed */
4.1, /* dHighSpeed */
12, /* dIntegrationTimeLowLamp */
12, /* dIntegrationTimeHighLamp */
600, /* wMotorDpi (Full step DPI) */
512, /* wRAMSize (KB) */
4, /* dMinIntegrationTimeLowres (ms) */
5, /* dMinIntegrationTimeHighres (ms) */
1, /* ok wGreenPWMDutyCycleLow (reg 0x2a + 0x2b) */
1, /* ok wGreenPWMDutyCycleHigh (reg 0x2a + 0x2b) */
0x02, /* ok bSensorConfiguration (0x0b) */
0x04, /* ok sensor control settings (reg 0x0c) */
0x7d, /* ok sensor control settings (reg 0x0d) */
0x37, /* ok sensor control settings (reg 0x0e) */
{0x02, 0x07, 0x00, 0x01, 0x04, 0x07, 0x00, 0x00, 0x03, 0x07},
/* ok mono (reg 0x0f to 0x18) */
{0x06, 0x16, 0x00, 0x05, 0x0c, 0x17, 0x00, 0x00, 0x0a, 0x17},
/* ok color (reg 0x0f to 0x18) */
_GREEN_CH, /* ok bReg_0x26 color mode - bits 4 and 5 */
0x40, /* ok bReg 0x27 color mode */
3, /* bReg 0x29 illumination mode */
/* illumination mode settings (not used for CCD devices)*/
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
1, /* ok StepperPhaseCorrection (reg 0x1a + 0x1b) */
0x00, /* ok bOpticBlackStart (reg 0x1c) */
0x42, /* ok bOpticBlackEnd (reg 0x1d) */
69, /* ok wActivePixelsStart (reg 0x1e + 0x1f) */
10758, /* ok wLineEnd (reg 0x20 + 0x21) */
16383, /* ok red lamp on (reg 0x2c + 0x2d) */
0, /* ok red lamp off (reg 0x2e + 0x2f) */
16383, /* ok green lamp on (reg 0x30 + 0x31) */
0, /* ok green lamp off (reg 0x32 + 0x33) */
16383, /* ok blue lamp on (reg 0x34 + 0x35) */
0, /* ok blue lamp off (reg 0x36 + 0x37) */
3, /* ok stepper motor control (reg 0x45) */
0, /* ok wStepsAfterPaperSensor2 (reg 0x4c + 0x4d) */
0x1e, /* steps to reverse on buffer full (reg 0x50) */
0x0c, /* ok acceleration profile (reg 0x51) */
0, /* ok lines to process (reg 0x54) */
0x0f, /* ok kickstart (reg 0x55) */
0x02, /* ok pwm freq (reg 0x56) */
1, /* ok pwm duty cycle (reg 0x57) */
0x0d, /* ok Paper sense (reg 0x58) */
0x41, /* ok misc io12 (reg 0x59) */
0x44, /* ok misc io34 (reg 0x5a) */
0x14, /* ok misc io56 (reg 0x5b) */
0, /* ok test mode ADC Output CODE MSB (reg 0x5c) */
0, /* ok test mode ADC Output CODE LSB (reg 0x5d) */
0, /* ok test mode (reg 0x5e) */
_LM9832,
MODEL_EPSON,
1.0
};
/** EPSON Perfection/Photo 1260 */
static HWDef Hw0x04B8_0x011D =
{
0.9, /* dMaxMotorSpeed */
0.8, /* dMaxMoveSpeed */
4.1, /* dHighSpeed */
12, /* dIntegrationTimeLowLamp */
12, /* dIntegrationTimeHighLamp */
600, /* wMotorDpi (Full step DPI) */
512, /* wRAMSize (KB) */
4, /* dMinIntegrationTimeLowres (ms) */
5, /* dMinIntegrationTimeHighres (ms) */
1, /* ok wGreenPWMDutyCycleLow (reg 0x2a + 0x2b) */
1, /* ok wGreenPWMDutyCycleHigh (reg 0x2a + 0x2b) */
0x02, /* ok bSensorConfiguration (0x0b) */
0x04, /* ok sensor control settings (reg 0x0c) */
0x7d, /* ok sensor control settings (reg 0x0d) */
0x37, /* ok sensor control settings (reg 0x0e) */
{0x02, 0x07, 0x00, 0x01, 0x04, 0x07, 0x00, 0x00, 0x03, 0x07},
/* ok mono (reg 0x0f to 0x18) */
{0x06, 0x0b, 0x00, 0x05, 0x0c, 0x17, 0x00, 0x00, 0x0a, 0x17},
/* ok color (reg 0x0f to 0x18) */
_GREEN_CH, /* ok bReg_0x26 color mode - bits 4 and 5 */
0x42, /* ok bReg 0x27 color mode */
3, /* bReg 0x29 illumination mode */
/* illumination mode settings (not used for CCD devices)*/
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
1, /* ok StepperPhaseCorrection (reg 0x1a + 0x1b) */
0x00, /* ok bOpticBlackStart (reg 0x1c) */
0x42, /* ok bOpticBlackEnd (reg 0x1d) */
69, /* ok wActivePixelsStart (reg 0x1e + 0x1f) */
10766, /* ok wLineEnd (reg 0x20 + 0x21) */
16383, /* ok red lamp on (reg 0x2c + 0x2d) */
0, /* ok red lamp off (reg 0x2e + 0x2f) */
16383, /* ok green lamp on (reg 0x30 + 0x31) */
0, /* ok green lamp off (reg 0x32 + 0x33) */
16383, /* ok blue lamp on (reg 0x34 + 0x35) */
0, /* ok blue lamp off (reg 0x36 + 0x37) */
3, /* ok stepper motor control (reg 0x45) */
0, /* ok wStepsAfterPaperSensor2 (reg 0x4c + 0x4d) */
0x1e, /* steps to reverse on buffer full (reg 0x50) */
0x0c, /* ok acceleration profile (reg 0x51) */
0, /* ok lines to process (reg 0x54) */
0x0f, /* ok kickstart (reg 0x55) */
0x02, /* ok pwm freq (reg 0x56) */
1, /* ok pwm duty cycle (reg 0x57) */
0x0d, /* ok Paper sense (reg 0x58) */
0x41, /* ok misc io12 (reg 0x59) */
0x44, /* ok misc io34 (reg 0x5a) */
0x14, /* ok misc io56 (reg 0x5b) */
0, /* ok test mode ADC Output CODE MSB (reg 0x5c) */
0, /* ok test mode ADC Output CODE LSB (reg 0x5d) */
0, /* ok test mode (reg 0x5e) */
_LM9832,
MODEL_EPSON,
1.5
};
/** Umax 3400/3450 */
static HWDef Hw0x1606_0x0060 =
{
1.5, /* dMaxMotorSpeed */
0.8, /* dMaxMoveSpeed */
2.75, /* dHighSpeed */
9, /* dIntegrationTimeLowLamp */
9, /* dIntegrationTimeHighLamp */
600, /* wMotorDpi (Full step DPI) */
512, /* wRAMSize (KB) */
8, /* dMinIntegrationTimeLowres (ms) */
8, /* dMinIntegrationTimeHighres (ms) */
4095, /* wGreenPWMDutyCycleLow (reg 0x2a + 0x2b) */
4095, /* wGreenPWMDutyCycleHigh (reg 0x2a + 0x2b) */
0x06, /* bSensorConfiguration (0x0b) */
0x73, /* sensor control settings (reg 0x0c) */
0x77, /* sensor control settings (reg 0x0d) */
0x15, /* sensor control settings (reg 0x0e) */
{0x00, 0x03, 0x04, 0x05, 0x00, 0x00, 0x00, 0x00, 0x07, 0x03},
/* mono (reg 0x0f to 0x18) */
{0x01, 0x0c, 0x0e, 0x10, 0x00, 0x00, 0x00, 0x00, 0x16, 0x0c},
/* color (reg 0x0f to 0x18) */
_GREEN_CH, /* bReg_0x26 color mode - bits 4 and 5 */
0x40, /* bReg 0x27 color mode */
1, /* bReg 0x29 illumination mode */
/* illumination mode settings (not used for CCD devices) */
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
1, /* StepperPhaseCorrection (reg 0x1a + 0x1b) */
0x2f, /* bOpticBlackStart (reg 0x1c) */
0x3e, /* bOpticBlackEnd (reg 0x1d) */
110, /* ? wActivePixelsStart (reg 0x1e + 0x1f) */
5469, /* wLineEnd (reg 0x20 + 0x21) */
1, /* red lamp on (reg 0x2c + 0x2d) */
16383, /* red lamp off (reg 0x2e + 0x2f) */
0, /* green lamp on (reg 0x30 + 0x31) */
0, /* green lamp off (reg 0x32 + 0x33) */
32, /* blue lamp on (reg 0x34 + 0x35) */
48, /* blue lamp off (reg 0x36 + 0x37) */
3, /* stepper motor control (reg 0x45) */
0, /* wStepsAfterPaperSensor2 (reg 0x4c + 0x4d) */
11, /* steps to reverse on buffer full (reg 0x50)*/
0xfc, /* acceleration profile (reg 0x51) */
3, /* lines to process (reg 0x54) */
0xcb, /* kickstart (reg 0x55) */
0x05, /* pwm freq (reg 0x56) */
5, /* pwm duty cycle (reg 0x57) */
0x0d, /* Paper sense (reg 0x58) */
0x44, /* misc io12 (reg 0x59) */
0x45, /* misc io34 (reg 0x5a) */
0x74, /* misc io56 (reg 0x5b) */
0, /* test mode ADC Output CODE MSB (reg 0x5c) */
0, /* test mode ADC Output CODE LSB (reg 0x5d) */
0, /* test mode (reg 0x5e) */
_LM9832,
MODEL_UMAX,
1.0
};
/** Umax 5400 */
static HWDef Hw0x1606_0x0160 =
{
1.1, /* dMaxMotorSpeed */
0.9, /* dMaxMoveSpeed */
0.0, /* dHighSpeed */
9, /* dIntegrationTimeLowLamp */
9, /* dIntegrationTimeHighLamp */
600, /* wMotorDpi (Full step DPI) */
512, /* wRAMSize (KB) */
8, /* dMinIntegrationTimeLowres (ms) */
8, /* dMinIntegrationTimeHighres (ms) */
4095, /* wGreenPWMDutyCycleLow (reg 0x2a + 0x2b) */
4095, /* wGreenPWMDutyCycleHigh (reg 0x2a + 0x2b) */
0x06, /* bSensorConfiguration (0x0b) */
0x73, /* sensor control settings (reg 0x0c) */
0x77, /* sensor control settings (reg 0x0d) */
0x25, /* sensor control settings (reg 0x0e) */
/* mono (reg 0x0f to 0x18) */
{0x00, 0x03, 0x04, 0x05, 0x00, 0x00, 0x00, 0x00, 0x07, 0x03},
/* color (reg 0x0f to 0x18) */
{0x01, 0x0c, 0x0e, 0x10, 0x00, 0x00, 0x00, 0x00, 0x16, 0x0c},
_GREEN_CH, /* bReg_0x26 color mode - bits 4 and 5 */
0x40, /* bReg 0x27 color mode */
1, /* bReg 0x29 illumination mode */
/* illumination mode settings (not used for CCD devices) */
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
1, /* StepperPhaseCorrection (reg 0x1a + 0x1b) */
20, /* bOpticBlackStart (reg 0x1c) */
45, /* bOpticBlackEnd (reg 0x1d) */
110, /* ? wActivePixelsStart (reg 0x1e + 0x1f) */
10669, /* wLineEnd (reg 0x20 + 0x21) */
1, /* red lamp on (reg 0x2c + 0x2d) */
16383, /* red lamp off (reg 0x2e + 0x2f) */
0, /* green lamp on (reg 0x30 + 0x31) */
0, /* green lamp off (reg 0x32 + 0x33) */
32, /* blue lamp on (reg 0x34 + 0x35) */
48, /* blue lamp off (reg 0x36 + 0x37) */
3, /* stepper motor control (reg 0x45) */
0, /* wStepsAfterPaperSensor2 (reg 0x4c + 0x4d) */
11, /* steps to reverse on buffer full (reg 0x50)*/
0xfc, /* acceleration profile (reg 0x51) */
3, /* lines to process (reg 0x54) */
0xcb, /* kickstart (reg 0x55) */
0x05, /* pwm freq (reg 0x56) */
5, /* pwm duty cycle (reg 0x57) */
0x0d, /* Paper sense (reg 0x58) */
0x44, /* misc io12 (reg 0x59) */
0x45, /* misc io34 (reg 0x5a) */
0x7c, /* misc io56 (reg 0x5b) */
0, /* test mode ADC Output CODE MSB (reg 0x5c) */
0, /* test mode ADC Output CODE LSB (reg 0x5d) */
0, /* test mode (reg 0x5e) */
_LM9832,
MODEL_UMAX1200,
1.0
};
/** Canon N650U/N656U */
static HWDef Hw0x04A9_0x2206 =
{
0.86, /* dMaxMotorSpeed */
0.243, /* dMaxMoveSpeed */
0.0, /* dHighSpeed */
100, /* dIntegrationTimeLowLamp */
100, /* dIntegrationTimeHighLamp */
1200, /* wMotorDpi (Full step DPI) */
512, /* wRAMSize (KB) */
3.75, /* dMinIntegrationTimeLowres (ms) */
5.75, /* dMinIntegrationTimeHighres (ms) */
0, /* wGreenPWMDutyCycleLow (reg 0x2a + 0x2b) */
0, /* wGreenPWMDutyCycleHigh (reg 0x2a + 0x2b) */
0x15, /* bSensorConfiguration (0x0b) */
0x4c, /* sensor control settings (reg 0x0c) */
0x2f, /* sensor control settings (reg 0x0d) */
0x00, /* sensor control settings (reg 0x0e) */
/* mono & color (reg 0x0f to 0x18) the
same for CIS devices */
{0x00, 0x00, 0x04, 0x05, 0x06, 0x07, 0x00, 0x00, 0x00, 0x05},
{0x00, 0x00, 0x04, 0x05, 0x06, 0x07, 0x00, 0x00, 0x00, 0x05},
(_BLUE_CH | _ONE_CH_COLOR), /* bReg_0x26 color mode */
0x00, /* bReg 0x27 color mode */
2, /* bReg 0x29 illumination mode (runtime) */
/* illumination mode settings */
{ 3, 0, 0, 23, 850, 0, 0 },
{ 2, 23, 2500, 23, 1800, 23, 950 },
1, /* StepperPhaseCorrection (reg 0x1a + 0x1b) */
0, /* bOpticBlackStart (reg 0x1c) */
0, /* bOpticBlackEnd (reg 0x1d) */
89, /* ? wActivePixelsStart (reg 0x1e + 0x1f) */
6074, /* wLineEnd (reg 0x20 + 0x21) */
23, /* red lamp on (reg 0x2c + 0x2d) */
2500, /* red lamp off (reg 0x2e + 0x2f) */
23, /* green lamp on (reg 0x30 + 0x31) */
1800, /* green lamp off (reg 0x32 + 0x33) */
23, /* blue lamp on (reg 0x34 + 0x35) */
950, /* blue lamp off (reg 0x36 + 0x37) */
3, /* stepper motor control (reg 0x45) */
0, /* wStepsAfterPaperSensor2 (reg 0x4c + 0x4d) */
0x3f, /* steps to reverse when buffer is full reg 0x50) */
0xfc, /* acceleration profile (reg 0x51) */
0, /* lines to process (reg 0x54) */
0x0f, /* kickstart (reg 0x55) */
0x08, /* pwm freq (reg 0x56) */
0x1f, /* pwm duty cycle (reg 0x57) */
0x05, /* Paper sense (reg 0x58) */
0x66, /* misc io12 (reg 0x59) */
0x16, /* misc io34 (reg 0x5a) */
0x91, /* misc io56 (reg 0x5b) */
0x01, /* test mode ADC Output CODE MSB (reg 0x5c) */
0, /* test mode ADC Output CODE LSB (reg 0x5d) */
0, /* test mode (reg 0x5e) */
_LM9832,
MODEL_CANON600,
2.0
};
/** Canon N1220U */
static HWDef Hw0x04A9_0x2207 =
{
0.72, /* dMaxMotorSpeed */
0.36, /* dMaxMoveSpeed */
0.0, /* dHighSpeed */
100, /* wIntegrationTimeLowLamp */
100, /* wIntegrationTimeHighLamp */
1200, /* wMotorDpi (Full step DPI) */
512, /* wRAMSize (KB) */
3.75, /* dMinIntegrationTimeLowres (ms) */
5.75, /* dMinIntegrationTimeHighres (ms) */
0, /* wGreenPWMDutyCycleLow (reg 0x2a + 0x2b) */
0, /* wGreenPWMDutyCycleHigh (reg 0x2a + 0x2b) */
0x15, /* bSensorConfiguration (0x0b) */
0x4c, /* sensor control settings (reg 0x0c) */
0x2f, /* sensor control settings (reg 0x0d) */
0x00, /* sensor control settings (reg 0x0e) */
/* mono (reg 0x0f to 0x18) */
{0x00, 0x00, 0x04, 0x05, 0x06, 0x07, 0x00, 0x00, 0x00, 0x05},
/* color (reg 0x0f to 0x18) */
{0x00, 0x00, 0x04, 0x05, 0x06, 0x07, 0x00, 0x00, 0x00, 0x05},
(_BLUE_CH | _ONE_CH_COLOR), /* bReg_0x26 color mode */
0x00, /* bReg 0x27 color mode */
2, /* bReg 0x29 illumination mode */
{ 3, 0, 0, 23, 2200, 0, 0 },
{ 2, 23, 16383, 23, 15000, 23, 6600 },
1, /* StepperPhaseCorrection (reg 0x1a + 0x1b) */
0, /* bOpticBlackStart (reg 0x1c) */
0, /* bOpticBlackEnd (reg 0x1d) */
124, /* wActivePixelsStart (reg 0x1e + 0x1f) */
10586, /* wLineEnd (reg 0x20 + 0x21) */
23, /* red lamp on (reg 0x2c + 0x2d) */
16383, /* red lamp off (reg 0x2e + 0x2f) */
23, /* green lamp on (reg 0x30 + 0x31) */
15000, /* green lamp off (reg 0x32 + 0x33) */
23, /* blue lamp on (reg 0x34 + 0x35) */
6600, /* blue lamp off (reg 0x36 + 0x37) */
3, /* stepper motor control (reg 0x45) */
0, /* wStepsAfterPaperSensor2 (reg 0x4c + 0x4d) */
0, /* steps to reverse when buffer is full reg 0x50) */
0xfc, /* acceleration profile (reg 0x51) */
0, /* lines to process (reg 0x54) */
0x0f, /* kickstart (reg 0x55) */
0x08, /* pwm freq (reg 0x56) */
0x1f, /* pwm duty cycle (reg 0x57) */
0x05, /* Paper sense (reg 0x58) */
0x66, /* misc io12 (reg 0x59) */
0x16, /* misc io34 (reg 0x5a) */
0x91, /* misc io56 (reg 0x5b) */
0x01, /* test mode ADC Output CODE MSB (reg 0x5c) */
0, /* test mode ADC Output CODE LSB (reg 0x5d) */
0, /* test mode (reg 0x5e) */
_LM9832,
MODEL_CANON1200,
2.0
};
/** Canon D660U */
static HWDef Hw0x04A9_0x2208 =
{
1.2, /* dMaxMotorSpeed */
1.1, /* dMaxMoveSpeed */
2.75, /* dHighSpeed */
9, /* dIntegrationTimeLowLamp */
9, /* dIntegrationTimeHighLamp */
300, /* wMotorDpi (Full step DPI) */
512, /* wRAMSize (KB) */
8, /* dMinIntegrationTimeLowres (ms) */
8, /* dMinIntegrationTimeHighres (ms) */
4095, /* wGreenPWMDutyCycleLow (reg 0x2a + 0x2b) */
4095, /* wGreenPWMDutyCycleHigh (reg 0x2a + 0x2b) */
0x02, /* bSensorConfiguration (0x0b) */
0x60, /* sensor control settings (reg 0x0c) */
0x2f, /* sensor control settings (reg 0x0d) */
0x13, /* sensor control settings (reg 0x0e) */
{0x06, 0x17, 0x01, 0x03, 0x05, 0x07, 0x00, 0x00, 0x0b },
{0x06, 0x17, 0x01, 0x03, 0x05, 0x07, 0x00, 0x00, 0x0b },
_GREEN_CH,
0, /* bReg 0x27 color mode */
1, /* bReg 0x29 illumination mode */
/* illumination mode settings (not used for CCD devices) */
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
0, /* StepperPhaseCorrection (reg 0x1a + 0x1b) */
13, /* bOpticBlackStart (reg 0x1c) */
33, /* bOpticBlackEnd (reg 0x1d) */
64, /* wActivePixelsStart (reg 0x1e + 0x1f) */
5440, /* wLineEnd (reg 0x20 + 0x21) */
16383, /* red lamp on (reg 0x2c + 0x2d) */
1, /* red lamp off (reg 0x2e + 0x2f) */
0, /* green lamp on (reg 0x30 + 0x31) */
0, /* green lamp off (reg 0x32 + 0x33) */
0, /* blue lamp on (reg 0x34 + 0x35) */
0, /* blue lamp off (reg 0x36 + 0x37) */
3, /* stepper motor control (reg 0x45) */
0, /* wStepsAfterPaperSensor2 (reg 0x4c + 0x4d) */
0x20, /* steps to reverse when buffer is full reg 0x50) */
0xfc, /* acceleration profile (reg 0x51) */
0, /* lines to process (reg 0x54) */
0, /* kickstart (reg 0x55) */
0x02, /* pwm freq (reg 0x56) */
0x1f, /* pwm duty cycle (reg 0x57) */
0x05, /* Paper sense (reg 0x58) */
0x44, /* misc io12 (reg 0x59) */
0x14, /* misc io34 (reg 0x5a) */
0x11, /* misc io56 (reg 0x5b) */
0, /* test mode ADC Output CODE MSB (reg 0x5c) */
0, /* test mode ADC Output CODE LSB (reg 0x5d) */
0, /* test mode (reg 0x5e) */
_LM9832,
MODEL_CANONCCD1200,
1.5
};
/** Canon 670/676/LiDE20 */
static HWDef Hw0x04A9_0x220D =
{
0.72, /* dMaxMotorSpeed */
0.23, /* dMaxMoveSpeed */
0.0, /* dHighSpeed */
100, /* dIntegrationTimeLowLamp */
100, /* dIntegrationTimeHighLamp */
1200, /* wMotorDpi (Full step DPI) */
512, /* wRAMSize (KB) */
3.75, /* dMinIntegrationTimeLowres (ms) */
5.75, /* dMinIntegrationTimeHighres (ms) */
0, /* wGreenPWMDutyCycleLow (reg 0x2a + 0x2b) */
0, /* wGreenPWMDutyCycleHigh (reg 0x2a + 0x2b) */
0x15, /* bSensorConfiguration (0x0b) */
0x4c, /* sensor control settings (reg 0x0c) */
0x2f, /* sensor control settings (reg 0x0d) */
0x00, /* sensor control settings (reg 0x0e) */
{0x00, 0x00, 0x04, 0x05, 0x06, 0x07, 0x00, 0x00, 0x00, 0x05},
/* mono (reg 0x0f to 0x18) */
{0x00, 0x00, 0x04, 0x05, 0x06, 0x07, 0x00, 0x00, 0x00, 0x05},
/* color (reg 0x0f to 0x18) */
(_BLUE_CH | _ONE_CH_COLOR), /* bReg_0x26 color mode */
0x00, /* bReg 0x27 color mode */
2, /* bReg 0x29 illumination mode (runtime) */
{ 3, 0, 0, 23, 1800, 0, 0 },
{ 2, 23, 3800, 23, 3300, 23, 2700 },
1, /* StepperPhaseCorrection (reg 0x1a + 0x1b) */
0, /* bOpticBlackStart (reg 0x1c) */
0, /* bOpticBlackEnd (reg 0x1d) */
75, /* wActivePixelsStart (reg 0x1e + 0x1f) */
6074, /* wLineEnd (reg 0x20 + 0x21) */
23, /* red lamp on (reg 0x2c + 0x2d) */
3800, /* red lamp off (reg 0x2e + 0x2f) */
23, /* green lamp on (reg 0x30 + 0x31) */
3300, /* green lamp off (reg 0x32 + 0x33) */
23, /* blue lamp on (reg 0x34 + 0x35) */
2700, /* blue lamp off (reg 0x36 + 0x37) */
3, /* stepper motor control (reg 0x45) */
0, /* wStepsAfterPaperSensor2 (reg 0x4c + 0x4d) */
0x3f, /* steps to reverse when buffer is full reg 0x50) */
0xfc, /* acceleration profile (reg 0x51) */
0, /* lines to process (reg 0x54) */
0x0f, /* kickstart (reg 0x55) */
0x08, /* pwm freq (reg 0x56) */
0x1f, /* pwm duty cycle (reg 0x57) */
0x04, /* Paper sense (reg 0x58) */
0x66, /* misc io12 (reg 0x59) */
0x16, /* misc io34 (reg 0x5a) */
0x91, /* misc io56 (reg 0x5b) */
0x01, /* test mode ADC Output CODE MSB (reg 0x5c) */
0, /* test mode ADC Output CODE LSB (reg 0x5d) */
0, /* test mode (reg 0x5e) */
_LM9833,
MODEL_CANON600,
2.0
};
/** Canon N1240U/LiDE30 */
static HWDef Hw0x04A9_0x220E =
{
0.72, /* dMaxMotorSpeed */
0.30, /* dMaxMoveSpeed */
0.0, /* dHighSpeed */
100, /* wIntegrationTimeLowLamp */
100, /* wIntegrationTimeHighLamp */
1200, /* wMotorDpi (Full step DPI) */
512, /* wRAMSize (KB) */
3.75, /* dMinIntegrationTimeLowres (ms) */
5.75, /* dMinIntegrationTimeHighres (ms) */
0, /* wGreenPWMDutyCycleLow (reg 0x2a + 0x2b) */
0, /* wGreenPWMDutyCycleHigh (reg 0x2a + 0x2b) */
0x15, /* bSensorConfiguration (0x0b) */
0x4c, /* sensor control settings (reg 0x0c) */
0x2f, /* sensor control settings (reg 0x0d) */
0x00, /* sensor control settings (reg 0x0e) */
{0x00, 0x00, 0x04, 0x05, 0x06, 0x07, 0x00, 0x00, 0x00, 0x05},
/* mono (reg 0x0f to 0x18) */
{0x00, 0x00, 0x04, 0x05, 0x06, 0x07, 0x00, 0x00, 0x00, 0x05},
/* color (reg 0x0f to 0x18) */
(_BLUE_CH | _ONE_CH_COLOR), /* bReg_0x26 color mode */
0x00, /* bReg 0x27 color mode */
2, /* bReg 0x29 illumination mode */
{ 3, 0, 0, 23, 3000, 0, 0 },
{ 2, 23, 16383, 23, 6500, 23, 4900 },
1, /* StepperPhaseCorrection (reg 0x1a + 0x1b) */
0, /* bOpticBlackStart (reg 0x1c) */
0, /* bOpticBlackEnd (reg 0x1d) */
52, /* wActivePixelsStart (reg 0x1e + 0x1f) */
10586, /* wLineEnd (reg 0x20 + 0x21) */
23, /* red lamp on (reg 0x2c + 0x2d) */
16383, /* red lamp off (reg 0x2e + 0x2f) */
23, /* green lamp on (reg 0x30 + 0x31) */
6500, /* green lamp off (reg 0x32 + 0x33) */
23, /* blue lamp on (reg 0x34 + 0x35) */
4900, /* blue lamp off (reg 0x36 + 0x37) */
3, /* stepper motor control (reg 0x45) */
0, /* wStepsAfterPaperSensor2 (reg 0x4c + 0x4d) */
0x20, /* steps to reverse when buffer is full reg 0x50) */
0xfc, /* acceleration profile (reg 0x51) */
0, /* lines to process (reg 0x54) */
0x0f, /* kickstart (reg 0x55) */
0x08, /* pwm freq (reg 0x56) */
0x1f, /* pwm duty cycle (reg 0x57) */
0x04, /* Paper sense (reg 0x58) */
0x66, /* misc io12 (reg 0x59) */
0x16, /* misc io34 (reg 0x5a) */
0x91, /* misc io56 (reg 0x5b) */
0x01, /* test mode ADC Output CODE MSB (reg 0x5c) */
0, /* test mode ADC Output CODE LSB (reg 0x5d) */
0, /* test mode (reg 0x5e) */
_LM9833,
MODEL_CANON1200,
2.0
};
/** Canon LiDE25 */
static HWDef Hw0x04A9_0x2220 =
{
0.70, /* dMaxMotorSpeed */
0.25, /* dMaxMoveSpeed */
0.0, /* dHighSpeed */
100, /* wIntegrationTimeLowLamp */
100, /* wIntegrationTimeHighLamp */
1200, /* wMotorDpi (Full step DPI) */
512, /* wRAMSize (KB) */
3.75, /* dMinIntegrationTimeLowres (ms) */
5.75, /* dMinIntegrationTimeHighres (ms) */
0, /* wGreenPWMDutyCycleLow (reg 0x2a + 0x2b) */
0, /* wGreenPWMDutyCycleHigh (reg 0x2a + 0x2b) */
0x11, /* bSensorConfiguration (0x0b) */
0x4d, /* sensor control settings (reg 0x0c) */
0x2f, /* sensor control settings (reg 0x0d) */
0x00, /* sensor control settings (reg 0x0e) */
{0x00, 0x00, 0x04, 0x05, 0x06, 0x07, 0x00, 0x00, 0x00, 0x07},
/* mono (reg 0x0f to 0x18) */
{0x00, 0x00, 0x04, 0x05, 0x06, 0x07, 0x00, 0x00, 0x00, 0x07},
/* color (reg 0x0f to 0x18) */
(_BLUE_CH | _ONE_CH_COLOR), /* bReg_0x26 color mode */
0x00, /* bReg 0x27 color mode */
2, /* bReg 0x29 illumination mode */
{ 3, 0, 0, 50, 3700, 0, 0 },
{ 2, 50, 5600, 50, 7100, 50, 4600 },
1, /* StepperPhaseCorrection (reg 0x1a + 0x1b) */
0, /* bOpticBlackStart (reg 0x1c) */
0, /* bOpticBlackEnd (reg 0x1d) */
0x7f, /* wActivePixelsStart (reg 0x1e + 0x1f) */
10559, /* wLineEnd (reg 0x20 + 0x21) */
50, /* red lamp on (reg 0x2c + 0x2d) */
5600, /* red lamp off (reg 0x2e + 0x2f) */
50, /* green lamp on (reg 0x30 + 0x31) */
7100, /* green lamp off (reg 0x32 + 0x33) */
50, /* blue lamp on (reg 0x34 + 0x35) */
4600, /* blue lamp off (reg 0x36 + 0x37) */
3, /* stepper motor control (reg 0x45) */
0, /* wStepsAfterPaperSensor2 (reg 0x4c + 0x4d) */
0x20, /* steps to reverse when buffer is full reg 0x50) */
0xfc, /* acceleration profile (reg 0x51) */
0, /* lines to process (reg 0x54) */
0x0f, /* kickstart (reg 0x55) */
0x08, /* pwm freq (reg 0x56) */
0x1f, /* pwm duty cycle (reg 0x57) */
0x04, /* Paper sense (reg 0x58) */
0x66, /* misc io12 (reg 0x59) */
0x16, /* misc io34 (reg 0x5a) */
0x91, /* misc io56 (reg 0x5b) */
0x01, /* test mode ADC Output CODE MSB (reg 0x5c) */
0, /* test mode ADC Output CODE LSB (reg 0x5d) */
0, /* test mode (reg 0x5e) */
_LM9833,
MODEL_CANON_LIDE25,
2.0
};
/** TravelScan 662 */
static HWDef Hw0x0A82_0x6620 =
{
0.72, /* dMaxMotorSpeed */
0.188, /* dMaxMoveSpeed */
0.0, /* dHighSpeed */
100, /* wIntegrationTimeLowLamp */
100, /* wIntegrationTimeHighLamp */
740, /* wMotorDpi (Full step DPI) */
512, /* wRAMSize (KB) */
3.75, /* dMinIntegrationTimeLowres (ms) */
5.75, /* dMinIntegrationTimeHighres (ms) */
3000, /* wGreenPWMDutyCycleLow (reg 0x2a + 0x2b) */
3000, /* wGreenPWMDutyCycleHigh (reg 0x2a + 0x2b) */
0x0d, /* bSensorConfiguration (0x0b) */
0x00, /* sensor control settings (reg 0x0c) */
0x25, /* sensor control settings (reg 0x0d) */
0x00, /* sensor control settings (reg 0x0e) */
{0x18, 0x01, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x03, 0x07},
/* mono (reg 0x0f to 0x18) */
{0x18, 0x01, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x03, 0x07},
/* color (reg 0x0f to 0x18) */
(_BLUE_CH | _ONE_CH_COLOR), /* bReg_0x26 color mode */
0x00, /* bReg 0x27 color mode */
2, /* bReg 0x29 illumination mode */
{ 3, 0, 0, 10, 450, 0, 0 },
{ 2, 10, 1000, 10, 880, 10, 630 },
1, /* StepperPhaseCorrection (reg 0x1a + 0x1b) */
1, /* bOpticBlackStart (reg 0x1c) */
2, /* bOpticBlackEnd (reg 0x1d) */
0x17, /* wActivePixelsStart (reg 0x1e + 0x1f) */
2600, /* wLineEnd (reg 0x20 + 0x21) */
10, /* red lamp on (reg 0x2c + 0x2d) */
1000, /* red lamp off (reg 0x2e + 0x2f) */
10, /* green lamp on (reg 0x30 + 0x31) */
880, /* green lamp off (reg 0x32 + 0x33) */
10, /* blue lamp on (reg 0x34 + 0x35) */
630, /* blue lamp off (reg 0x36 + 0x37) */
3, /* stepper motor control (reg 0x45) */
0, /* wStepsAfterPaperSensor2 (reg 0x4c + 0x4d) */
0, /* steps to reverse when buffer is full reg 0x50) */
0, /* acceleration profile (reg 0x51) */
0, /* lines to process (reg 0x54) */
0x09, /* kickstart (reg 0x55) */
0x02, /* pwm freq (reg 0x56) */
0x16, /* pwm duty cycle (reg 0x57) */
0x01, /* Paper sense (reg 0x58) */
0x0e, /* misc io12 (reg 0x59) */
0x96, /* misc io34 (reg 0x5a) */
0x01, /* misc io56 (reg 0x5b) */
0, /* test mode ADC Output CODE MSB (reg 0x5c) */
0, /* test mode ADC Output CODE LSB (reg 0x5d) */
0, /* test mode (reg 0x5e) */
_LM9833,
MODEL_TSCAN,
1.8
};
/******************** all available combinations *****************************/
/** here we have all supported devices and their settings...
*/
static SetDef Settings[] =
{
/* Plustek devices... */
/* LM9831 based */
{"0x07B3-0x0010-0", &Cap0x07B3_0x0010_0, &Hw0x07B3_0x0013_0, "OpticPro U12" },
{"0x07B3-0x0011-0", &Cap0x07B3_0x0011_0, &Hw0x07B3_0x0013_0, "OpticPro U24" },
/* LM9832 based */
{"0x07B3-0x0017-0", &Cap0x07B3_0x0017_0, &Hw0x07B3_0x0017_0, "OpticPro UT12/UT16" },
{"0x07B3-0x0015-0", &Cap0x07B3_0x0015_0, &Hw0x07B3_0x0017_0, "OpticPro U24" },
{"0x07B3-0x0017-4", &Cap0x07B3_0x0017_4, &Hw0x07B3_0x0017_4, "OpticPro UT24" },
/* never seen yet */
{"0x07B3-0x0013-0", &Cap0x07B3_0x0013_0, &Hw0x07B3_0x0013_0, "Unknown device" },
{"0x07B3-0x0013-4", &Cap0x07B3_0x0013_4, &Hw0x07B3_0x0013_4, "Unknown device" },
{"0x07B3-0x0011-4", &Cap0x07B3_0x0011_4, &Hw0x07B3_0x0013_4, "Unknown device" },
{"0x07B3-0x0010-4", &Cap0x07B3_0x0010_4, &Hw0x07B3_0x0013_4, "Unknown device" },
{"0x07B3-0x0014-0", &Cap0x07B3_0x0014_0, &Hw0x07B3_0x0017_0, "Unknown device" },
{"0x07B3-0x0015-4", &Cap0x07B3_0x0015_4, &Hw0x07B3_0x0017_4, "Unknown device" },
{"0x07B3-0x0014-4", &Cap0x07B3_0x0014_4, &Hw0x07B3_0x0017_4, "Unknown device" },
{"0x07B3-0x0016-4", &Cap0x07B3_0x0016_4, &Hw0x07B3_0x0016_4, "Unknown device" },
{"0x07B3-0x0017-2", &Cap0x07B3_0x0017_2, &Hw0x07B3_0x0017_2, "Unknown device" },
{"0x07B3-0x0017-3", &Cap0x07B3_0x0017_3, &Hw0x07B3_0x0017_3, "Unknown device" },
{"0x07B3-0x0007", &Cap0x07B3_0x0007_0, &Hw0x07B3_0x0007_0, "Unknown device" },
{"0x07B3-0x000F", &Cap0x07B3_0x000F_0, &Hw0x07B3_0x000F_0, "Unknown device" },
{"0x07B3-0x000F-4", &Cap0x07B3_0x000F_4, &Hw0x07B3_0x000F_4, "Unknown device" },
{"0x07B3-0x0005-2", &Cap0x07B3_0x0005_2, &Hw0x07B3_0x0007_2, "Unknown device" }, /* TOKYO 600 */
{"0x07B3-0x0014-1", &Cap0x07B3_0x0014_1, &Hw0x07B3_0x0017_1, "Unknown device" }, /* A3 */
{"0x07B3-0x0012-0", &Cap0x07B3_0x0012_0, &Hw0x07B3_0x0012_0, "Unknown device" }, /* Brother Demo */
/* Mustek BearPaw...*/
{"0x0400-0x1000-0", &Cap0x0400_0x1000_0, &Hw0x0400_0x1000_0, "BearPaw 1200" },
{"0x0400-0x1001-1", &Cap0x0400_0x1000_0, &Hw0x0400_0x1001_1, "BearPaw 1200" },
{"0x0400-0x1001-0", &Cap0x0400_0x1001_0, &Hw0x0400_0x1001_0, "BearPaw 2400" },
/* Genius devices... */
{"0x0458-0x2007", &Cap0x07B3_0x0007_0, &Hw0x07B3_0x0007_0, "ColorPage-HR6 V2" },
{"0x0458-0x2008", &Cap0x07B3_0x0007_0, &Hw0x07B3_0x0007_0, "ColorPage-HR6 V2" },
{"0x0458-0x2009", &Cap0x07B3_0x000F_0, &Hw0x07B3_0x000F_0, "ColorPage-HR6A" },
{"0x0458-0x2013", &Cap0x07B3_0x0007_4, &Hw0x07B3_0x0007_4, "ColorPage-HR7" },
{"0x0458-0x2015", &Cap0x07B3_0x0005_4, &Hw0x07B3_0x0007_4, "ColorPage-HR7LE" },
{"0x0458-0x2016", &Cap0x07B3_0x0005_4, &Hw0x07B3_0x0007_0, "ColorPage-HR6X" },
/* Hewlett Packard... */
{"0x03F0-0x0505", &Cap0x03F0_0x0505, &Hw0x03F0_0x0505, "Scanjet 2100c" },
{"0x03F0-0x0605", &Cap0x03F0_0x0605, &Hw0x03F0_0x0605, "Scanjet 2200c" },
/* EPSON... */
{"0x04B8-0x010F", &Cap0x04B8_0x010F, &Hw0x04B8_0x010F, "Perfection 1250/Photo" },
{"0x04B8-0x011D", &Cap0x04B8_0x010F, &Hw0x04B8_0x011D, "Perfection 1260/Photo" },
/* UMAX... */
{"0x1606-0x0050", &Cap0x1606_0x0060, &Hw0x1606_0x0060, "3400" },
{"0x1606-0x0060", &Cap0x1606_0x0060, &Hw0x1606_0x0060, "3400" },
{"0x1606-0x0160", &Cap0x1606_0x0160, &Hw0x1606_0x0160, "5400" },
/* COMPAQ... */
{"0x049F-0x001A", &Cap0x1606_0x0060, &Hw0x1606_0x0060, "S4-100" },
/* CANON... */
{"0x04A9-0x2206", &Cap0x04A9_0x2206, &Hw0x04A9_0x2206, "N650U/N656U" },
{"0x04A9-0x2207", &Cap0x04A9_0x2207, &Hw0x04A9_0x2207, "N1220U" },
{"0x04A9-0x2208", &Cap0x04A9_0x2208, &Hw0x04A9_0x2208, "D660U" },
{"0x04A9-0x220D", &Cap0x04A9_0x220D, &Hw0x04A9_0x220D, "N670U/N676U/LiDE20" },
{"0x04A9-0x220E", &Cap0x04A9_0x220E, &Hw0x04A9_0x220E, "N1240U/LiDE30" },
{"0x04A9-0x2220", &Cap0x04A9_0x2220, &Hw0x04A9_0x2220, "LiDE25" },
/* SYSCAN... */
{"0x0A82-0x6620", &Cap0x0A82_0x6620, &Hw0x0A82_0x6620, "TravelScan 662" },
/* Please add other devices here...
* The first entry is a string, composed out of the vendor and product id,
* it's used by the driver to select the device settings. For other devices
* than those of Plustek, you'll not need to add the second '-' part
*
* The second entry decribes the capabilities of the device, you may find
* one suitable for your scanner, for a better description of the entries
* have a look at the beginning of this file at Cap0x07B3_0x0017_0 for
* the UT12
*
* The third entry is for the default setting of the LM983x register
* settings, you can often find these in your Windoze driver ini
* Have a look at the Hw0x0400_0x1000_0 or Hw0x07B3_0x0017_0 for further
* description
*
* The fourth entry is simply the name of the device, which will be
* displayed by the frontend
*/
{ NULL, NULL, NULL, NULL } /* last entry, never remove... */
};
/**
* tables for the motor settings
* The models KaoHsiung, HuaLien and Tokyo600 are currently set
* within the code in conjunction with some CCD combinations.
* NOTE: the touples PWM and PWM_Duty are used to set the registers
* 0x56 and 0x57, the recommended setting is 8,10
* if you notice a whining noise and the motor does not move,
* you might increase the MCLK variable.
*/
static ClkMotorDef Motors[] = {
{ MODEL_KaoHsiung,
64, 20, 6, /* PWM, PWM_Duty, MCLK for fast move */
0, 0, /* for lineend adjustment, here disabled */
/* Motor settings (PWM and PWM_Duty) */
{{ 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, 0 },
{ 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, 0 }},
/* Color mode MCLK settings */
{ 2, 2, 2, 2, 2, 3, 3, 3, 3, 3 },
{ 2, 2, 2, 2, 2, 3, 3, 3, 3, 3 },
/* Gray mode MCLK settings */
{ 2, 2, 2, 2, 2, 3, 3, 3, 3, 3 },
{ 2, 2, 2, 2, 2, 3, 3, 3, 3, 3 }
},
{ MODEL_HuaLien, 64, 20, 6, 0, 0,
/* Motor settings (PWM and PWM_Duty) */
{{ 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, 0 },
{ 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, 0 }},
/* Color mode MCLK settings */
{ 2, 2, 2, 2, 2, 3, 3, 3, 3, 3 },
{ 2, 2, 2, 2, 2, 3, 3, 3, 3, 3 },
/* Gray mode MCLK settings */
{ 2, 2, 2, 2, 2, 3, 3, 3, 3, 3 },
{ 2, 2, 2, 2, 2, 3, 3, 3, 3, 3 }
},
{ MODEL_Tokyo600, 4, 4, 6, 0, 0,
/* Motor settings (PWM and PWM_Duty) */
{{ 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, 0 },
{ 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, 0 }},
/* Color mode MCLK settings */
{ 2, 2, 2, 2, 2, 3, 3, 3, 3, 3 },
{ 2, 2, 2, 2, 2, 3, 3, 3, 3, 3 },
/* Gray mode MCLK settings */
{ 2, 2, 2, 2, 2, 3, 3, 3, 3, 3 },
{ 2, 2, 2, 2, 2, 3, 3, 3, 3, 3 }
},
{ MODEL_MUSTEK600, 4, 4, 6, 0, 0,
/* Motor settings (PWM and PWM_Duty) */
{{ 16, 4, 1 }, { 16, 4, 1 }, { 16, 4, 1 }, { 16, 4, 1 }, { 16, 4, 1 },
{ 16, 4, 1 }, { 16, 4, 1 }, { 16, 4, 1 }, { 16, 4, 1 }, { 16, 4, 1 }},
/* Color mode MCLK settings */
#if 0
{ 3.5, 3.5, 3.5, 4.0, 6.0, 8.0, 11.5, 11.5, 11.5, 11.5 },
{ 3.5, 3.5, 3.5, 4.0, 6.0, 8.0, 11.5, 11.5, 11.5, 11.5 },
#else
{ 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0 },
{ 8.0, 8.0, 8.0, 8.0, 8.0, 8.0, 11.5, 11.5, 11.5, 11.5 },
#endif
/* Gray mode MCLK settings */
{ 10.5, 10.5, 10.5, 10.5, 10.5, 10.5, 11.5, 11.5, 11.5, 11.5 },
{ 10.5, 10.5, 10.5, 10.5, 10.5, 10.5, 11.5, 11.5, 11.5, 11.5 }
},
{ MODEL_MUSTEK1200, 2, 32, 3, 0, 0,
/* Motor settings (PWM and PWM_Duty) */
/* <=75dpi <=100dpi <=150dpi <=200dpi <=300dpi */
{{ 2, 32, 1 }, { 2, 32, 1 }, { 2, 32, 1 }, { 2, 32, 1 }, { 2, 32, 1 },
/* <=400dpi <=600dpi <=800dpi <=1200dpi <=2400dpi */
{ 2, 32, 1 }, { 2, 32, 1 }, { 2, 32, 1 }, { 2, 32, 1 }, { 2, 32, 1 }},
/* Color mode MCLK settings */
{ 3.5, 3.5, 3.5, 3.5, 3.5, 3.5, 3.5, 3.5, 3.5, 3.5 },
{ 3.5, 3.5, 3.5, 3.5, 3.5, 3.5, 3.5, 3.5, 3.5, 3.5 },
/* Gray mode MCLK settings */
{ 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0 },
{ 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0 }
},
/* settings good for the HP models (tested with 2200)*/
{ MODEL_HP, 8, 60, 6, 0, 0,
/* Motor settings (PWM and PWM_Duty) */
{{ 8, 60, 1 }, { 8, 60, 1 }, { 8, 60, 1 }, { 8, 60, 1 }, { 8, 60, 1 },
{ 8, 60, 1 }, { 8, 60, 1 }, { 8, 60, 1 }, { 8, 60, 1 }, { 8, 60, 1 }},
/* Color mode MCLK settings */
{ 4.0, 4.0, 4.0, 4.0, 3.0, 4.0, 6.0, 6.0, 6.0, 6.0 },
{ 4.0, 4.0, 4.0, 4.0, 3.0, 4.0, 6.0, 6.0, 6.0, 6.0 },
/* Gray mode MCLK settings */
{ 8.0, 8.0, 8.0, 8.0, 8.0, 13.0, 13.0, 13.0, 13.0, 13.0 },
{ 8.0, 8.0, 8.0, 8.0, 8.0, 13.0, 13.0, 13.0, 13.0, 13.0 }
},
{ MODEL_CANON600, 8, 31, 12, 0, 0,
/* Motor settings (PWM and PWM_Duty) */
/* <=75dpi <=100dpi <=150dpi <=200dpi <=300dpi */
{{ 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 },
/* <=400dpi <=600dpi <=800dpi <=1200dpi <=2400dpi */
{ 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 }},
/* Color mode MCLK settings */
{ 7.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0 },
{ 7.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0 },
/* Gray mode MCLK settings */
{ 15.0, 12.0, 12.0, 12.0, 12.0, 12.0, 12.0, 12.0, 12.0, 12.0 },
{ 15.0, 12.0, 12.0, 12.0, 12.0, 12.0, 12.0, 12.0, 12.0, 12.0 }
},
{ MODEL_CANON1200, 8, 31, 8, 0, 0,
/* Motor settings (PWM and PWM_Duty) */
/* <=75dpi <=100dpi <=150dpi <=200dpi <=300dpi */
{{ 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 },
/* <=400dpi <=600dpi <=800dpi <=1200dpi <=2400dpi */
{ 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 }},
/* Color mode MCLK settings */
{ 3.0, 3.0, 3.0, 3.0, 3.0, 3.0, 3.0, 3.0, 3.0, 3.0 },
{ 3.0, 3.0, 3.0, 3.0, 3.0, 3.0, 5.0, 6.0, 6.0, 6.0 },
/* Gray mode MCLK settings */
{ 8.5, 7.0, 5.0, 4.0, 2.5, 2.5, 2.5, 2.5, 2.5, 2.5 },
{ 8.5, 6.5, 6.0, 6.0, 6.0, 6.0, 8.0, 12.0, 12.0, 12.0 }
},
/* settings good for the UMAX models (tested with 3400) */
{ MODEL_UMAX, 16, 4, 6, 0, 0,
/* Motor settings (PWM and PWM_Duty) */
{{ 16, 4, 1 }, { 16, 4, 1 }, { 16, 4, 1 }, { 16, 4, 1 }, { 16, 4, 1 },
{ 16, 4, 1 }, { 16, 4, 1 }, { 16, 4, 1 }, { 16, 4, 1 }, { 16, 4, 1 }},
/* Color mode MCLK settings */
{ 3.5, 3.5, 3.5, 3.5, 3.5, 3.5, 3.5, 3.5, 3.5, 3.5 },
{ 3.5, 3.5, 3.5, 3.5, 3.5, 3.5, 3.5, 3.5, 3.5, 3.5 },
/* Gray mode MCLK settings */
{ 10.5, 10.5, 10.5, 10.5, 10.5, 10.5, 10.5, 10.5, 10.5, 10.5 },
{ 10.5, 10.5, 10.5, 10.5, 10.5, 10.5, 10.5, 10.5, 10.5, 10.5 }
},
{ MODEL_UMAX1200, 16, 4, 6, 0, 0,
/* Motor settings (PWM and PWM_Duty) */
{{ 16, 4, 1 }, { 16, 4, 1 }, { 16, 4, 1 }, { 16, 4, 1 }, { 16, 4, 1 },
{ 16, 4, 1 }, { 16, 4, 1 }, { 16, 4, 1 }, { 16, 4, 1 }, { 16, 4, 1 }},
/* Color mode MCLK settings */
{ 3.0, 3.0, 3.0, 3.0, 3.0, 6.0, 6.0, 6.0, 6.0, 6.0 },
{ 5.0, 5.0, 5.0, 5.0, 5.0, 5.0, 5.0, 5.0, 5.0, 5.0 },
/* Gray mode MCLK settings */
{ 6.0, 6.0, 6.0, 6.0, 6.0, 13.0, 13.0, 13.0, 13.0, 13.0 },
{ 13.0, 13.0, 13.0, 13.0, 13.0, 13.0, 13.0, 13.0, 13.0, 13.0 }
},
/* settings good for the EPSON models */
{ MODEL_EPSON, 2, 1, 6, 0, 0,
/* Motor settings (PWM and PWM_Duty) */
/* <=75dpi <=100dpi <=150dpi <=200dpi <=300dpi */
{{ 2, 1, 1 }, { 2, 1, 1 }, { 2, 1, 1 }, { 2, 1, 1 }, { 2, 1, 1 },
/* <=400dpi <=600dpi <=800dpi <=1200dpi <=2400dpi */
{ 2, 1, 1 }, { 2, 1, 1 }, { 2, 1, 1 }, { 2, 1, 1 }, { 2, 1, 1 }},
/* Color mode MCLK settings */
{ 2.0, 2.0, 2.5, 2.5, 2.5, 2.5, 4.0, 4.0, 6.0, 6.0 },
{ 2.0, 2.0, 2.5, 2.5, 3.0, 3.0, 3.0, 4.0, 6.0, 6.0 },
/* Gray mode MCLK settings */
{ 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 9.0, 9.0, 18.0, 18.0 },
{ 6.0, 6.0, 6.0, 6.0, 6.0, 8.0, 9.0, 9.0, 18.0, 18.0 }
},
{ MODEL_CANONCCD1200, 2, 31, 3, 0, 0,
/* Motor settings (PWM and PWM_Duty) */
/* <=75dpi <=100dpi <=150dpi <=200dpi <=300dpi */
{{ 2, 31, 1 }, { 2, 31, 1 }, { 2, 31, 1 }, { 2, 31, 1 }, { 2, 31, 1 },
/* <=400dpi <=600dpi <=800dpi <=1200dpi <=2400dpi */
{ 2, 31, 1 }, { 2, 31, 1 }, { 2, 31, 1 }, { 2, 31, 1 }, { 2, 31, 1 }},
/* Color mode MCLK settings */
{ 2.0, 2.0, 2.0, 2.5, 2.5, 2.5, 3.0, 3.5, 5.0, 5.0 },
{ 2.0, 2.0, 2.0, 3.0, 3.0, 3.0, 3.0, 4.0, 5.0, 5.0 },
/* Gray mode MCLK settings */
{ 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0 },
{ 6.5, 6.5, 6.5, 7.0, 8.0, 8.0, 8.0, 10.0, 10.0, 10.0 }
},
{ MODEL_CANON_LIDE25, 8, 31, 3, 0, 0,
/* Motor settings (PWM and PWM_Duty) */
/* <=75dpi <=100dpi <=150dpi <=200dpi <=300dpi */
{{ 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 },
/* <=400dpi <=600dpi <=800dpi <=1200dpi <=2400dpi */
{ 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 }},
/* Color mode MCLK settings */
{ 3.0, 3.0, 3.0, 3.0, 3.5, 3.0, 3.0, 3.0, 3.0, 3.0 },
{ 3.0, 3.0, 3.0, 3.0, 3.5, 3.5, 5.0, 6.0, 6.0, 6.0 },
/* Gray mode MCLK settings */
{ 8.5, 7.0, 5.0, 4.0, 2.5, 2.5, 2.5, 2.5, 2.5, 2.5 },
{ 7.5, 6.5, 6.0, 6.0, 6.0, 6.0, 8.0, 12.0, 12.0, 12.0 }
},
{ MODEL_TSCAN, 2, 22, 6, 75, 4000,
/* Motor settings (PWM and PWM_Duty) */
/* <=75dpi <=100dpi <=150dpi <=200dpi <=300dpi */
{{ 2, 22, 1 }, { 2, 22, 1 }, { 2, 22, 1 }, { 2, 22, 1 }, { 2, 22, 1 },
/* <=400dpi <=600dpi <=800dpi <=1200dpi <=2400dpi */
{ 2, 22, 1 }, { 2, 22, 1 }, { 2, 22, 1 }, { 2, 22, 1 }, { 2, 22, 1 }},
/* Color mode MCLK settings */
/* Color mode MCLK settings */
{ 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0 },
{ 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0 },
/* Gray mode MCLK settings */
{ 16.0, 16.0, 16.0, 16.0, 16.0, 16.0, 16.0, 16.0, 16.0, 16.0 },
{ 16.0, 16.0, 16.0, 16.0, 16.0, 16.0, 16.0, 16.0, 16.0, 16.0 },
}
};
/* END PLUSTEK-USBDEVS.C ....................................................*/