2006-06-01 m. allan noah * backend/fujitsu.[ch]: update to v 1.0.28 * doc/descriptions/fujitsu.desc: status and version update 2006-05-30 m. allan noah * backend/fujitsu.c: DBG speedup from abel deuring, duplex bugfix, split scsi/usb data into new DBG level, stop including or calling sanei_thread * doc/descriptions/fujitsu.desc: minor update * doc/sane-fujitsu.man: minor text changes, note DBG levels 2006-5-28 Gerhard Jaeger * doc/sane-plustek_pp.man: Fixed typo. * doc/sane-plustek.man: Update. * doc/descriptions/plustek.desc: Update. * backend/plustek.c backend/plustek.h backend/plustek-usb.c backend/plustek-usbcal.c backend/plustek-usbcalfile.c backend/plustek-usbdevs.c backend/plustek-usb.h backend/plustek-usbhw.c backend/plustek-usbimg.c backend/plustek-usbio.c backend/plustek-usbmap.c backend/plustek-usbscan.c backend/plustek-usbshading.c: Added support for CIS-based sheetfed scanners, namely TravelScan662. Added support for saving calibration data for CIS devices - should speedup CanoScan devices. 2006-05-28 Wittawat Yamwong * backend/pixma.h: Added #define ENODATA and EPROTO to let the backend compiles under OS/2 with gcc 3.3.5. 2006-05-27 Giuseppe Sacco * Updated italian translation 2006-05-27 Mattias Ellert * tools/sane-desc.c: Added plist output 2006-05-26 Mattias Ellert * po/Makefile.in, po/sane-backends.*.po: updated with translation keys from pixma backand 2006-05-26 Wittawat Yamwong * AUTHORS: added Wittawat Yamwong * configure configure.in doc/Makefile.in doc/sane.man doc/descriptions/pixma.desc backend/Makefile.in backend/dll.conf.in backend/pixma*.[ch]: added pixma backend * doc/descriptions-external/pixma.desc: removed because the backend is now a part of sane-backends. * sanei/sanei_usb.c: Modified sanei_read_int(): call usb_clear_halt() if and only if the endpoint is halted. 2006-05-24 Mattias Ellert * Updated Swedish translation 2006-05-23 m. allan noah * backend/fujitsu.c: dont send scsi cmd F1 if unsupported. * doc/descriptions/fujitsu.desc: update version number. 2006-05-23 Gerhard Jaeger * doc/plustek/Makefile.kernel26: Fixed extraction of version string. 2006-05-21 m. allan noah * backend/fujitsu.c backend/fujitsu.conf.in doc/descriptions/fujitsu.desc: added usb ids for fi-5110EOX 2006-05-21 Henning Meier-Geinitz * README.linux: Updated concerning USB permissions (really, this time). * doc/descriptions/unsupported.desc: Removed models that are now in pixma.desc. Updated comment for Plustek OpticPro S24. * doc/descriptions-external/hp_rts88xx.desc: Added reason for not including the backend. * backend/gt68xx.c backend/gt68xx_devices.c doc/gt68xx/gt68xx.CHANGES doc/descriptions/gt68xx.desc: Added support for Plustek OpticPro S24 (some models). Added .conf entry for Plustek OpticPro S12. 2006-05-19 m. allan noah * backend/fujitsu*: use sanei_scsi_open_extended() change config file var to "buffer-size", increase default * doc/sane-fujitsu.man: buffer-size mentioned 2006-05-18 Henning Meier-Geinitz * doc/descriptions-external/pixma.desc: Added some models (from Wittawat Yamwong ). 2006-05-14 m. allan noah * backend/fujitsu.c: sane_read() - only send EOF with len=0 do_cmd() - simplify timeout handling * backend/fujitsu-scsi.h: increase default timeoutes 2006-05-15 St�hane Voltz * backend/genesys_devices.c backend/genesys_gl646.c: tuned HP 2300 geometry description and added a safeguard against failed origin detection 2006-05-14 m. allan noah * backend/fujitsu*: rewritten backend, supports many more scanners with much better usb support and less model-specific code. * doc/sane-fujitsu.man: updated to match new backend. 2006-05-12 m. allan noah * doc/descriptions/fujitsu.desc: updated with all known scanners by fujitsu. Most now supported as 'basic'. 2006-05-10 Henning Meier-Geinitz * tools/hotplug-ng/convert-usermap.sh tools/udev/convert-usermap.sh: Removed. No longer needed as hotplug-ng and udev files are generated by sane-desc now. * tools/README tools/hotplug/README tools/hotplug-ng/README doc/sane-usb.man: Updated documentation concerning udev. * doc/descriptions/unsupported.desc: Added Epson Stylus CX-5800 and some PLANon scanners. 2006-05-06 Henning Meier-Geinitz * doc/descriptions/lexmark.desc: X1150 is reported to work. * doc/descriptions-external/brother.desc: MFC-3820CN is reported to work. 2006-04-27 Henning Meier-Geinitz * doc/descriptions-external/brother.desc doc/descriptions-external/brother2.desc: Network models are now supported (bug #303386). 2006-04-23 Pierre Willenbrock * backend/genesys_devices.c: Increase length of acceleration slopes for Canon LiDE 35/40/50/60 2006-04-21 St�hane Voltz * backend/genesys.c: add workraound with issue related to asic reset and data scan amount 2006-04-20 Henning Meier-Geinitz * backend/artec_eplus48u.conf.in: Made config file more readable. Instead of commenting every single line, the explanations are given once at the top. Don't repeat options that aren't changed anyway. * doc/descriptions/unsupported.desc: Added Microtek Scanmaker 3880. 2006-04-18 Giuseppe Sacco * Updated italian translation 2006-04-18 Pierre Willenbrock * backend/genesys_gl841.c backend/genesys_gl646.c: Actually use the endian converted slope table. * backend/genesys_conv_hlp.c: Fix interpolation code to emit all pixels of a line. * doc/descriptions/unsupported.desc: Added missing scanners from libsane.usermap. 2006-04-18 Henning Meier-Geinitz * doc/descriptions/epson.desc doc/descriptions/fujitsu.desc doc/descriptions/hp.desc doc/descriptions/u12.desc doc/descriptions/umax.desc: Added most USB vendor and product ids. Minor cleanup. * doc/descriptions/avision.desc: Used avision-desc.sh to update the .desc file to current SANE CVS avision.c code. Added USB ids. * doc/descriptions/plustek.desc: Added USB ids. Splitted some entries which have two different USB ids. Clarified comment about UMAX 3400. * tools/hotplug/libsane.usermap: Removed. Will be created automatically by sane-desc. * tools/Makefile.in: Create libsane.usermap (for hotplug), libsane.db (for hotplug-ng) and libsane.rules (for udev) automatically with sane-desc based on the :usbid tokens in the description files. * doc/Makefile.in: Don't print warnings when creating the HTML scanner tables. The warnings are already printed in the tools directory. * doc/descriptions-external/brother.desc doc/descriptions-external/brother2.desc: Point to current lists on Brother website. * tools/hotplug/.cvsignore tools/hotplug-ng/.cvsignore tools/udev/.cvsignore: Added. 2006-04-17 Henning Meier-Geinitz * backend/umax1220u-common.c backend/umax1220u.c doc/descriptions/umax1220u.desc doc/sane-umax1220u.man: Make UMAX 2100U (and probably 1600U and 2000U) work. Code from Patrick Lessard . Updated manual page and .desc file. * AUTHORS: Added Patrick Lessard and Pierre Willenbrock. * doc/descriptions/unsupported.desc doc/descriptions-external/pixma.desc: Moved scanners supported by the external pixma backend to pixma.desc. Added Canon PIXMA MP730. * doc/sane-mustek_usb2.man: Removed description of non-existing configuration file. 2006-04-12 Julien Blache * tools/sane-desc.c: Fix/optimize udev rules; tests on the same line are ANDed together, not ORed together, causing the rules to trigger more often than necessary. 2006-04-09 Henning Meier-Geinitz * frontend/saned.c: If saned does not find any config file, it calls fclose with a NULL FILE*. The code may also leak open file descriptors and FILE's if multiple config files are found. (bug #303339). Fixed possible segfault on close_handle() (bug #303338). * doc/descriptions/umax1220u.desc: Added links to Patrick Lessard's patch. * backend/qcam.c: Fixed undefined symbols in the qcam backend on GNU/kFreeBSD (patch from Aurelien Jarno ). * doc/descriptions/unsupported.desc: Added Lexmark X5150. 2006-04-03 Henning Meier-Geinitz * doc/descriptions-external/brother2.desc: Added several scanners from Brother website. * doc/descriptions/unsupported.desc: Added C-Channel scanners. * tools/hotplug/libsane.usermap: Added some scanners. 2006-03-29 Henning Meier-Geinitz * backend/sp15c.c: Fixed ADF support. Patch from Andreas Degert . * doc/descriptions-external/cs3200f.desc: Listed new cs3200f backend for Canon 3200F. * doc/descriptions/unsupported.desc: Added Canon PIXMA760, Tevion MD 90090, Microtek ScanMaker 4600, and Visioneer Onetouch 9320. Removed Canon CanoScan 3200F (now in external backends). 2006-03-27 Pierre Willenbrock * backend/genesys.c backend/genesys.h backend/genesys_low.h backend/genesys_conv.c backend/genesys_gl841.c: Added extended option "Threshold" for lineart mode(Thanks to Laurent Charpentier). 2006-03-24 Julien Blache * doc/*: Another batch of spelling fixes from A. Costa. 2006-03-24 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Added Iris Iriscan and Xerox Documate 510. 2006-03-21 Julien Blache * doc/*.man: More spelling fixes from A. Costa (through Debian). 2006-02-02 Oliver Schwartz * backend/snapscan-scsi.c: Limit inquiry length to 120 bytes if firmware is not yet loaded 2006-03-18 Julien Blache * doc/sane-apple.man: Applied patch from A Costa (through Debian); english/spelling fixes for sane-apple(5). 2006-03-16 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Added Microtek ScanMaker 4850 II and Plustek OpticPro ST 64+. 2006-03-12 St�hane Voltz * backend/genesys_gl646.c: removed now unneeded #ifdef in gl646_send_gamma_table. 2006-03-12 Pierre Willenbrock * backend/genesys_gl646.c: fixed silly thinko in gl646_send_gamma_table. 2006-03-12 St�hane Voltz * backend/genesys_gl646.c: fixed gl646_send_gamma_table after endianess changes. Put again a little fix for power saving 2006-03-11 Henning Meier-Geinitz * sanei/sanei_usb.c tools/sane-find-scanner.c: Added USB support for DragonFlyBSD (bug #303183). 2006-03-09 Pierre Willenbrock * backend/genesys.c backend/genesys_low.h: Removed little endian conversions in slope table creation functions * backend/genesys_gl646.c backend/genesys_gl841.c: Added little endian conversions to gl*_send_slope_table functions 2006-03-09 Pierre Willenbrock * backend/genesys.c: Some annotations about endianess of scanned data * backend/genesys_gl646.c: Convert gamma tables to little endian 2006-03-06 St�hane Voltz * backend/genesys_gl646.c: power saving fixes 2006-03-05 Henning Meier-Geinitz * doc/descriptions-external/samsung.desc: Added USB ids for SCX-4100 (bug #303166). * doc/descriptions/unsupported.desc: Added Brother MFC 9600, Canon PIXMA MP450, and Plustek ScanCopy 115. 2006-02-16 Gerhard Jaeger * doc/plustek/Plustek-PARPORT.changes: Update. * backend/plustek_pp.c: Bumped build number. * backend/plustek-pp_ptdrv.c backend/plustek-pp_detec.c: Fixed bug, that prevents backend from working, when the device is another parport than parport0 - spotted by Christoph Steinbruchel. 2006-02-14 Gerhard Jaeger * doc/u12/U12.changes: Update. * backend/u12.c: Bumped build number. * backend/u12-hw.c: SoftwareReset is now disabled in cancelSequence when the device is a Genius scanner. 2006-02-13 St�hane Voltz * backend/genesys_gl646.c: disabled power saving for gl646. 2006-02-12 Henning Meier-Geinitz * README.solaris: Added link to installation report. * doc/descriptions/unsupported.desc: Removed HP ScanJet 8200 (supported by Avision backend). Minor updates. 2006-02-04 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Removed Trust Office Scan USB 19200 (now in niash.desc), added Xerox 4800 One Touch. * include/sane/sanei_usb.h sanei/sanei_usb.c: Workaround for compilation problem on Windows/cygwin. * backend/dll.c: With cygwin, use ":" as DIR_SEP (patch from Philip Aston ). 2006-02-04 Ullrich Sigwanz * backend/niash_xfer.c: Added Trust OfficeScan 19200 * doc/descriptions/niash.desc: Added Trust OfficeScan 19200 * backend/niash.c: Removed Reload on X,Y settings 2006-02-02 Oliver Schwartz * backend/snapscan.h: Corrected USB ID for Benq 310 2006-01-31 Gerhard Jaeger * doc/plustek/Plustek-USB.changes: Update. * backend/plustek.c: Bumped build number. * backend/plustek-usbdevs.c: Fixed CanoScan N1220U settings. 2006-01-29 Henning Meier-Geinitz * doc/descriptions-external/brother2.desc: Changed status of Brother MFC-410CN to "basic" (bug #302961). * doc/descriptions/unsupported.desc: Added Benq 7400UT and Genius Colorpage CS. 2006-01-26 Henning Meier-Geinitz * backend/snapscan-usb.c: Added #defines for SHM_R/W for cygwin (patch from Philip Aston ). * AUTHORS: Troy Rollo is now active. 2006-01-22 Henning Meier-Geinitz * doc/descriptions-external/epkowa.desc: Updated to match iscan-1.18.0. Added usb ids (patch from Olaf Meeuwissen ). * doc/descriptions/unsupported.desc: Added Scanshell 800N and Canon Smartbase MP360. * sanei/sanei_usb.c tools/sane-find-scanner.c: Added checks for altsetting =! 0. 2006-01-22 Mattias Ellert * backend/dll.c, backend/plustek-usbhw.c, backend/plustek-usbscan.c, sanei/sanei_pio.c: Fixed warnings about C++ style comments. * backend/hp5400_xfer.h: Fixed compilation warnings. 2006-01-21 Mattias Ellert * backend/canon-sane.c: Fixed variable redeclaration. 2006-01-05 St�hane Voltz * tools/hotplug/libsane.usermap: Added Dell A920 (rebranded X1100) 2006-01-19 Gerhard Jaeger * doc/plustek/Plustek-USB.changes: Update. * backend/plustek.c: Bumped build number. Fixed constraint_type for OPT_BUTTON. * backend/plustek-usbdevs.c: Added high-speed setting for HP2200. Cleanup. 2006-01-18 Gerhard Jaeger * doc/plustek/Plustek-USB.changes: Update. * backend/plustek.c: Bumped build number. * backend/plustek-usbdevs.c: Fixed CanoScan N670U settings, see (bugreport #302738). 2006-01-15 Henning Meier-Geinitz * doc/descriptions/canon630u.desc doc/descriptions/coolscan2.desc doc/descriptions/hp5400.desc doc/descriptions/niash.desc doc/descriptions/unsupported.desc: Added USB vendor and product ids. Minor cleanup. * backend/artec_eplus48u.conf.in doc/sane-artec_eplus48u.man doc/descriptions/artec_eplus48u.desc: Added Yakumo Scan50. Minor cleanup. * doc/descriptions/gt68xx.desc: Added Mustek BearPaw 1248 CU. * doc/descriptions/lexmark.desc: Added USB vendor and product ids. Changed status of X1150 and X1170 according to reports on sane-devel. 2006-01-15 Ulrich Deiters * backend/canon-sane.c: fixed byte-swapping problem for little-endian platforms (affects raw-mode scanning with FS2710 slide scanner) 2006-01-14 Henning Meier-Geinitz * tools/check-usb-chip.c: Improved rts8822l-01h chipset detection by adding check for descriptor.bcdUSB == 0x110 reported by some scanners and accepting any value diferent to 0, read from 0xfe11 register. Patch from Jonathan Bravo Lopez . * tools/sane-desc.c: Added "ignore" parameter to :usbid token. Print warning if a backend defines USB models without defining usbid. Print warning if a model doesn't have an interface. * doc/descriptions.txt: Added "ignore" parameter to :usbid token. * doc/descriptions-external/hpaio.desc doc/descriptions-external/hpoj.desc doc/descriptions-external/samsung.desc: Updated comments. Added usb ids or "ignore". 2006-01-10 Oliver Schwartz * doc/descriptions/snapscan.desc: Changed entries for duplicate USB IDs, added Epson Stylus CX-1500 * backend/snapscan.c backend/snapscan-scsi.c: Added support for 12 bit gamma tables for Epson CX-1500 * backend/snapscan.conf.in: Added Epson Stylus CX-1500 2006-01-10 Gerard Klaver * doc/descriptions-external/stv680.desc: Added USB id. added Creative webcam to list 2006-01-10 Henning Meier-Geinitz * doc/descriptions-external/epkowa.desc: Film area guide mode of 4990 not supported (bug #302728). * doc/descriptions-external/brother-mfc4600.desc doc/descriptions-external/brother.desc doc/descriptions-external/brother2.desc doc/descriptions-external/hp3770.desc doc/descriptions-external/hp3900.desc doc/descriptions-external/hp8200.desc doc/descriptions-external/hp_rts88xx.desc doc/descriptions-external/mustek_a3p1.desc doc/descriptions-external/primascan.desc doc/descriptions-external/template.desc. doc/descriptions-external/viceo.desc: Added several USB ids. Added some more scanners. General cleanup. 2006-01-09 Henning Meier-Geinitz * doc/descriptions/gt68xx.desc: Added USB id. * doc/descriptions/unsupported.desc: Added interfaces to Panasonic scanners. 2006-01-08 Oliver Schwartz * doc/descriptions/snapscan.desc: Added USB IDs 2006-01-08 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Added Xerox 4800. * doc/descriptions.txt tools/sane-desc.c: Added support for keyword :usbid. All output modes now print the usb vendor and product modes. Added usermap, db, and udev output modes for generating USB vendor/product lists for hotplug (ng) and Linux udev. Added version information to html modes. * doc/descriptions/gt68xx.desc: Added vendor and product ids for all scanners. * doc/descriptions/artec_eplus48u.desc doc/descriptions/genesys.desc doc/descriptions/hp3500.desc doc/descriptions/hp4200.desc doc/descriptions/ma1509.desc doc/descriptions/microtek2.desc doc/descriptions/mustek_usb.desc doc/descriptions/mustek_usb2.desc doc/descriptions/sm3600.desc doc/descriptions/sm3840.desc doc/descriptions/template.desc. doc/descriptions/umax1220u.desc doc/descriptions/unsupported.desc doc/descriptions-external/template.desc.: Added USB vendor and product ids. Minor cleanups. 2006-01-07 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Added Medion MD 85264 finger print sensor and Trust Office Scan USB 19200. * doc/descriptions-external/brother2.desc tools/hotplug/libsane.usermap: Brother DCP-7010 is reported to work (bug #302862). * tools/check-usb-chip.c: Print version information when detecting chip sets. * sanei/sanei_usb.c: Added warning if libusb support is not built in and some more debug messages. * doc/descriptions-external/hp3900.desc: Status of HP ScanJet 4070 Photosmart is now minimal. * tools/sane-desc.c: Added new output mode: statistics. This mode prints overal statistics about known devices. Added support for more than one search directory. Removed support for deprecated backend status ("alpha", "beta" ...). Ran indent -gnu. HTML output (backends and mfgs) prints statitics now. Unify status and device type strings. Simplified status and device type string printing. Removed any remaining links of backend status. 2006-01-06 Oliver Schwartz * backend/snapscan-scsi.c backend/snapscan-options.c backend/snapscan.c: Some fixes for the Epson Stylus CX1500 2006-01-05 St�hane Voltz * backend/umax_pp_low.c: removed unused local variable 2006-01-05 Henning Meier-Geinitz * backend/Makefile.in backend/abaton.conf backend/abaton.conf.in backend/agfafocus.conf backend/agfafocus.conf.in backend/apple.conf backend/apple.conf.in backend/artec.conf backend/artec.conf.in backend/artec_eplus48u.conf backend/artec_eplus48u.conf.in backend/avision.conf backend/avision.conf.in backend/bh.conf backend/bh.conf.in backend/canon.conf backend/canon.conf.in backend/canon630u.conf backend/canon630u.conf.in backend/canon_pp.conf backend/canon_pp.conf.in backend/coolscan.conf backend/coolscan.conf.in backend/coolscan2.conf backend/coolscan2.conf.in backend/dc210.conf backend/dc210.conf.in backend/dc240.conf backend/dc240.conf.in backend/dc25.conf backend/dc25.conf.in backend/dll.conf backend/dll.conf.in backend/dmc.conf backend/dmc.conf.in backend/epson.conf backend/epson.conf.in backend/fujitsu.conf backend/fujitsu.conf.in backend/genesys.conf backend/genesys.conf.in backend/gphoto2.conf backend/gphoto2.conf.in backend/gt68xx.conf backend/gt68xx.conf.in backend/hp.conf backend/hp.conf.in backend/hp4200.conf backend/hp4200.conf.in backend/hp5400.conf backend/hp5400.conf.in backend/hpsj5s.conf backend/hpsj5s.conf.in backend/ibm.conf backend/ibm.conf.in backend/leo.conf backend/leo.conf.in backend/lexmark.conf backend/lexmark.conf.in backend/ma1509.conf backend/ma1509.conf.in backend/matsushita.conf backend/matsushita.conf.in backend/microtek.conf backend/microtek.conf.in backend/microtek2.conf backend/microtek2.conf.in backend/mustek.conf backend/mustek.conf.in backend/mustek_pp.conf backend/mustek_pp.conf.in backend/mustek_usb.conf backend/mustek_usb.conf.in backend/nec.conf backend/nec.conf.in backend/net.conf backend/net.conf.in backend/pie.conf backend/pie.conf.in backend/plustek.conf backend/plustek.conf.in backend/plustek_pp.conf backend/plustek_pp.conf.in backend/qcam.conf backend/qcam.conf.in backend/ricoh.conf backend/ricoh.conf.in backend/s9036.conf backend/s9036.conf.in backend/saned.conf backend/saned.conf.in backend/sceptre.conf backend/sceptre.conf.in backend/sharp.conf backend/sharp.conf.in backend/sm3840.conf backend/sm3840.conf.in backend/snapscan.conf backend/snapscan.conf.in backend/sp15c.conf backend/sp15c.conf.in backend/st400.conf backend/st400.conf.in backend/tamarack.conf backend/tamarack.conf.in backend/teco1.conf backend/teco1.conf.in backend/teco2.conf backend/teco2.conf.in backend/teco3.conf backend/teco3.conf.in backend/test.conf backend/test.conf.in backend/u12.conf backend/u12.conf.in backend/umax.conf backend/umax.conf.in backend/umax1220u.conf backend/umax1220u.conf.in backend/umax_pp.conf backend/umax_pp.conf.in backend/v4l.conf backend/v4l.conf.in: Renamed backend configuration files from *.conf to *.conf.in. The configuration files are preprocessed by backend/Makefile now and variables like @DATADIR@ are substituted by the appropriate directories. This is especially useful for firmware locations. For the firmware paths for the artec_eplus48u, gt68xx, and snapscan backends variables were used. Bug #302590. Regenerate .conf files only if .conf.in were changed. * backend/.cvsignore: Added *.conf. * README.linux: Mentioned udev. * doc/backend-writing.txt: New chapters about the build system and the files and directories of sane-backends. Fixed building instructions for tstbackend. Mentioned that sane_* symbols should be only used for API symbols. * testsuite/Makefile.in testsuite/README testsuite/testfile.pnm: Changed testsuite to use the test backend instead of the pnm backend. This actually works with current sane-backends. * PROBLEMS: Removed pnm problem description. It's not relevant for normal users and explained in the sane-pnm man page anyway. * backend/genesys.c: Fixed some compilation warnings. * tools/hotplug/libsane.usermap: Added Hewlett-Packard PSC 1210. 2006-01-03 Henning Meier-Geinitz * doc/sane.tex: Corrected formula for calculation of bytes_per_line in chapter 4.3.8 sane_get_parameters. New version: 1.04. 2006-01-02 Henning Meier-Geinitz * backend/microtek2.c backend/microtek2.h: Fixed problem with option "resolution" which esists twice at the same time. Bug #302466. * tools/hotplug/libsane.usermap: Added Canon LiDE 60 (bug #302830). * backend/gt68xx.c backend/gt68xx.conf backend/gt68xx_devices.c backend/gt68xx_high.c doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES doc/gt68xx/gt68xx.TODO: Added Plustek OpticPro S(T)12 (product id 0x040b). Mostly untested. Print warmup message 5 seconds after starting the warm-up. * doc/descriptions/unsupported.desc: Added Visioneer 9450 USB. Updated comments for Plustek S(T)12. * backend/test.c backend/test.conf backend/test.h doc/sane-test.man doc/descriptions/test.desc: Added option "source" which can be used to simulate an Automatic Document Feeder (ADF). Added copyright header to test.h. * frontend/scanimage.c: Don't create and delete a file in batch mode if the document feeder is empty or if CTRL-D is pressed in prompt mode. This change avoids deleting existing files. For an explanation, see bug #302797. 2006-01-01 Oliver Schwartz * backend/snapscan-data.c backend/snapscan-options.c backend/snapscan.c doc/descriptions/snascan.desc: Added (static) calibration data for Benq 5150 / 5250 * backend/snapscan.h backend/snapscan.conf: Added preliminary support for Epson Stylus CX 1500 * backend/Makefile.in: Added snapscan-data.c 2005-12-29 Henning Meier-Geinitz * doc/descriptions-external/scanwit.desc: Added "(Acer)" to manufacturer name (bug #302801). * doc/descriptions/unsupported.desc: Added/updated several old Acer (Benq) and Agfa parport scanners. 2005-12-28 Henning Meier-Geinitz * tools/hotplug/libsane.usermap: Added Brother MFC 8440. * Makefile.in: make libcheck now also checks for non standard sane symbols (sane_*). * doc/descriptions/unsupported.desc: HP Scanjet 3690 uses GL646_HP chipset. 2005-12-27 Henning Meier-Geinitz * README.linux: Mention ld.so.conf issue. * doc/descriptions/unsupported.desc doc/descriptions-external/hp3900.desc: Added external hp3900 backend. Moved (possibly) supported scanners from unsupported.desc. * doc/backend-writing.c: Added some hints about what to do to add a new backend to the existing sane-backends code. 2005-12-24 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Added Lexmark X2330. 2005-12-23 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Added Canon Pixma MP500. * README.openbsd: Added hint about CPPFLAGS. * doc/descriptions/artec.desc: Changed status of Artec AT6 to "good" as reported in bug #302749. * tools/hotplug/libsane.usermap: Added Brother MFC-7420. 2005-12-20 Henning Meier-Geinitz * backend/dll.c doc/descriptions/dll.desc: Fixed dynamic loading on current HP/UX systems (bug #302732). * AUTHORS ChangeLog configure configure.in backend/Makefile.in backend/dll.conf backend/hp3500.c doc/Makefile.in doc/sane-hp3500.man doc/sane.man doc/descriptions/hp3500.desc: Added hp3500 backend which supports the HP ScanJet 3500 series, including the 3500C, 3530C and 3570C (patch from Troy Rollo ) (bug #302687). * doc/descriptions-external/hp3500.desc: Deleted. * doc/descriptions/hp4200.desc doc/descriptions/lexmark.desc doc/descriptions/mustek_usb2.desc: Removed "NEW!" markers. 2005-12-18 Henning Meier-Geinitz * Makefile.in: List ChangeLog-1.0.17 in DISTFILES. * configure configure.in: Changed version to 1.0.17-cvs. Enabled compilation warnings. * doc/descriptions-external/brother2.desc: Added Brother MFC-215C. Older entries can be found in ChangeLog-1.0.17.