Stéphane Voltz
f73440f5a6
raise build number
2014-06-02 06:19:28 +02:00
Stéphane Voltz
23c8bc461b
improve 600 dpi gray scans
...
- define LiDE 110 specific table for 600 dpi
- extend it to reach right dpi
2014-06-02 06:19:28 +02:00
Stéphane Voltz
3b0d8728f3
use generic slope table generation for gl124
2014-06-02 06:19:28 +02:00
Stéphane Voltz
c2e1bd6b4d
add init_scan_regs function to internal API
...
- define a common scan register setting function
- start to move gl124.C to generic motor slope handling
2014-06-02 06:19:28 +02:00
Stéphane Voltz
5f166f1016
improve UTA detection by updating hardware sensors
...
- call sensor hardware update earlier to detect XPA at open time
2014-06-02 06:19:28 +02:00
Stéphane Voltz
1ec94972b9
usb reset for gl646 on sane_exit
...
- improves reliability by resetting usb device on leaving
2014-06-02 06:19:28 +02:00
m. allan noah
af80354325
epjitsu backend v24
...
enable fine calibration for S1300i 225 & 300 dpi, and S300 150 dpi
2014-06-01 08:31:21 -04:00
Paul Newall
f67f37ec19
kodakaio.c comments on configure parameters have test backend added
2014-05-30 21:19:13 +01:00
m. allan noah
bac4009627
epjitsu backend v23
...
- add S1300i support
- fix buffer overruns in read_from_scanner
- set default page width
- simplified the 225x200 resolution code
2014-05-27 21:42:17 -04:00
Rolf Bensch
849bbd07e0
changelog for recent work
2014-05-26 19:04:38 +02:00
Rolf Bensch
8316417ed9
Pixma backend version 0.17.9
2014-05-26 19:04:23 +02:00
Rolf Bensch
8d192503f7
remove unused variable
2014-05-26 18:56:37 +02:00
Rolf Bensch
c495f5a5af
fix ADF paper empty @ start scanning
2014-05-26 18:38:54 +02:00
Rolf Bensch
18de732bbf
changelog for recent work
2014-05-16 15:41:18 +02:00
Rolf Bensch
94958e04e0
Pixma backend version 0.17.8
2014-05-16 15:40:52 +02:00
Rolf Bensch
c5a98ef214
Canon Pixma MG7100 Series scanner is working
2014-05-16 15:39:52 +02:00
Rolf Bensch
e8c9b727bd
fix MG7100 image data post processing @ high resolutions > 600dpi
2014-05-16 15:36:30 +02:00
m. allan noah
a3e6982070
epjitsu: update desc file for S1100 and S1300i
2014-05-15 22:05:00 -04:00
Mark Buda
c591d2b7da
Correction of some spelling/grammatical errors in source code
2014-05-15 22:04:37 -04:00
Mark Buda
20fbf1dc94
Correction of some spelling/grammatical errors and miscellany in man pages
2014-05-15 22:04:36 -04:00
Mark Buda
f538aa3829
Minor bug fix to man page
2014-05-15 22:04:36 -04:00
Peter Marschall
bcd232fb41
epjitsu: add Fujitsu S1300i to epjitsu.conf.in
2014-05-15 22:04:36 -04:00
Peter Marschall
40f74dd208
epjitsu: document how to extract .nal files in Linux
...
In Fujitsu ScanSnap installation DVDs the .nal firmware files required
for the epjitsu backend to work are located in cabinet files.
The script snippet locates these cabinet files on the DVD and extracts all
.nal files it finds.
2014-05-15 22:04:36 -04:00
Peter Marschall
2d438531b1
epjitsu.c: add/fix a few comments
2014-05-15 22:04:36 -04:00
Hiroshi Miura
a4cff1c9e2
epjitsu: implement get_gcd
...
Signed-off-by: Hiroshi Miura <miurahr@linux.com>
2014-05-15 22:04:36 -04:00
Hiroshi Miura
bc459dea9d
epjitsu: ScanSnap S1100 support
...
Add S1100 support
The ideas and cmd data are comes from:
http://ubuntuforums.org/showthread.php?t=1678335
TBD: test on S1100, I don't have a machine.
2014-05-15 22:04:36 -04:00
Hiroshi Miura
ceeb9bb2d3
epjitsu: refactor coarsecal()
...
Now refactoring coarsecal() for S1100 support.
it is carefully changed not to break S300/1300/1500.
the chunk come from http://ubuntuforums.org/showthread.php?t=1678335
2014-05-15 22:04:36 -04:00
Hiroshi Miura
e6abe74b5c
epjitsu: introduce object_position()
...
Rename ingest() to object_position()
now it can do both ingest and eject.
This is required by S1100 support.
chunk come from
http://ubuntuforums.org/showthread.php?t=1678335
2014-05-15 22:04:36 -04:00
Hiroshi Miura
2f7c6382f4
epjitsu: x,y_resolution difference treatment
...
ScanScanp has a resolution 225x200 in each model.
The function which treat it should use a mathematic theory.
Euclidean algorithm should be used to get GCD (Greatest Common Devisor)
for this calcuration.
This patch make a separate function that should be get_GCD and
simplize a logic in copy image function.
TBD: this don't have Euclidean algorithm. Just prepare for it.
Signed-off-by: Hiroshi Miura <miurahr@linux.com>
2014-05-15 22:04:36 -04:00
Hiroshi Miura
25947781ec
epjitsu: tl_y parameter support
...
The driver can cut top of image for padding.
We can also cut an ordered size at a top of image.
It make tl_y parameter works.
Signed-off-by: Hiroshi Miura <miurahr@linux.com>
2014-05-15 22:04:36 -04:00
Hiroshi Miura
529a7611d2
epjitsu: skip top padding
...
The driver need a padding at top of page.
Because scansnap don't treat empty image
at the top of image that is generated when
loading paper, the driver cut top of page
in 1/2 inch.
Signed-off-by: Hiroshi Miura <miurahr@linux.com>
2014-05-15 22:04:36 -04:00
Hiroshi Miura
5ab232d3a6
epjitsu: fix indent
...
Signed-off-by: Hiroshi Miura <miurahr@linux.com>
2014-05-15 22:04:36 -04:00
Hiroshi Miura
f3d5455e9a
epjitsu: optimize loop
...
Signed-off-by: Hiroshi Miura <miurahr@linux.com>
2014-05-15 22:04:36 -04:00
Hiroshi Miura
9f1542afc6
epjitsu: page width support
...
ScanSnap itself don't have a feature to
detect and scan area in demanded width.
Otherwise driver need to cut into proper width.
this introduce page_width parameter and facility
to cut image into page width.
Signed-off-by: Hiroshi Miura <miurahr@linux.com>
2014-05-15 22:04:36 -04:00
Hiroshi Miura
8ef91bb06d
epjitsu: unit convert macro
...
introducing macros converting between scanner unit
and inches each other.
Signed-off-by: Hiroshi Miura <miurahr@linux.com>
2014-05-15 22:04:36 -04:00
Stéphane Voltz
0694698fd8
enable gamma only at scan time
2014-05-12 22:02:06 +02:00
Stéphane Voltz
cced79e963
fix #314663
...
- bug was due to an off by one in gamma table copy
2014-05-12 21:39:16 +02:00
Stéphane Voltz
b51673a252
debug cleanups
...
- cleanup some debug messages
- prepare for new internal scan API
2014-05-11 09:24:16 +02:00
Stéphane Voltz
ee4cd1cdc4
halt endpoint properly before resetting
2014-05-10 08:50:45 +02:00
Rolf Bensch
316d1b1098
changelog for recent work
2014-05-08 20:04:56 +02:00
Rolf Bensch
932cd03d10
MX360 shouldn't hang anymore (@ adf paper empty)
2014-05-08 19:57:59 +02:00
Rolf Bensch
7a695f3f47
remove comment: adf empty buggy
2014-05-08 19:51:54 +02:00
Rolf Bensch
3b0861b3bd
Pixma backend version 0.17.7
2014-05-08 19:46:50 +02:00
Rolf Bensch
b4d7533ae3
fix adf paper empty bug
...
- new parameter mp->adf_state:
+ detect start scan session
+ handle adf scan between pages
+ detect end scan session (adf paper empty)
- old code: s->param->adf_pageid hasn't been reset @ adf paper empty
2014-05-08 19:35:25 +02:00
Rolf Bensch
f5d936c655
all ADF scanners support 14" legal paper size
2014-05-08 19:22:01 +02:00
m. allan noah
522f4f4d0f
canon_dr backend v46
...
- split debug level 30 into two levels
- simplify jpeg ifdefs
- add support for DR-M160
2014-04-11 21:21:42 -04:00
m. allan noah
0eabc04805
Fix range and value of fujitsu offtimer option
2014-04-11 21:20:30 -04:00
m. allan noah
50236fab4e
fujitsu backend v121
...
- add JFIF APP0 marker with resolution to jpeg images
- improve jpeg duplex parsing code
- simplify jpeg ifdefs
- add offtimer option for more recent scanners
2014-04-08 22:11:42 -04:00
m. allan noah
17a6615a11
canon_dr: split debug level
2014-04-08 22:11:42 -04:00
Rolf Bensch
39965093e1
Canon Pixma MX410 is working
2014-04-07 16:56:50 +02:00