mirror
/
sane-project-backends
kopia lustrzana https://gitlab.com/sane-project/backends
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
4 780 Commity
30 Gałęzie
58 Tagi
50 MiB
Wykres commitów

592 Commity (ee11f5abcfdecfaf711f7c0a7d6fb3ba36cb3fb3)

Autor SHA1 Wiadomość Data
Henning Geinitz 921f7d7cbc Added Canon PIXMA MP780 and Lexmark P6250. 2005-08-16 09:32:21 +00:00
Oliver Schwartz 59fc80c118 Added support for Epson 3490/3590 (thanks to Matt Judge) 2005-08-15 18:06:38 +00:00
Gerhard Jaeger 55cfaf1fbc Updated version number. 2005-08-15 14:36:18 +00:00
Henning Geinitz 46cfa92d35 Enabled backtracking by default. This is slower but avois bumping the scan head 
at the end of the scan area and also missing parts of the scanned
image. Increased safety margin for backtracking. This fixes the "garbled image"
bug. Set default gamma value to 2. Manpage update. Status set to "basic".
 2005-08-14 12:59:32 +00:00
Henning Geinitz 3c5ea794ba Added hp4200 backend. Code from Julien BLACHE's sane-backends-extras debian 
package, based on Frank Zago's patches based on Adrian Perez Jorge's code. Fixed
compilation warnings. Fixed bug when no sane device was given. Code indented by
indent -gnu. Added man page.
 2005-08-13 15:30:02 +00:00
Henning Geinitz 137155c1ee doc/descriptions/niash.desc doc/descriptions/sm3840.desc. 2005-08-13 15:17:25 +00:00
Henning Geinitz 784791758e Added Hewlett-Packard Scanjet 4370. 2005-08-09 17:16:32 +00:00
Gerhard Jaeger 9bd3a059cb Added CanoScan LiDE25. 2005-08-08 07:36:22 +00:00
Henning Geinitz faf4c8c57e Added Xerox Workcentre 470cx. Added link for Canon DR-2080C. 2005-07-30 13:42:46 +00:00
Gerard Klaver a1b957aaad Update status VM3564 2005-07-29 20:31:52 +00:00
Henning Geinitz 9c81b97d4a Added unsupported scanners from hp_rts88xx.desc. Removed HP ScanJet 3770 (now in 
hp3770 backend). Added Lexmark X75 PrinTrio.
 2005-07-24 21:01:52 +00:00
Oliver Schwartz 74ff64ae24 Updated descriptions for Epson 1670, 2480 and 2580 2005-07-15 17:43:39 +00:00
Rene Rebe e5a5f45497 Updated the Avision backend with the latest off-site maintained version: 
fixed segmentation faults for some modes, many many new devices, two
different duplex modes are supported, vast speedup of multi page batch scans,
buttons as well a 7-segment LED readout and some quirks for old scanners not
filling all fields
 2005-07-15 09:12:27 +00:00
Henning Geinitz 38cc925c4b Changed resolution from 75 to 100 dpi and changed 16 bit/color to 12 based on a 
user report for the Visioneer OneTouch 7300. Updated .desc. Moved check for
stable lamp to its own function. Mustek ScanExpress A3 USB: Use CIS
calibration. Use lamp warmup. Fixed CCD on GT6801 scanning (color scanning was
broken due to a change in motormode_2.
 2005-07-10 20:58:58 +00:00
Henning Geinitz 74cd84acb5 Added links to scanners with GL646 and GL841 chipsets. Moved all unsupported 
scanners from doc/descriptions-external/genesys.desc to unsupported.desc. Minor
fixes for other scanners.
 2005-07-03 13:46:52 +00:00
Henning Geinitz cb0ed1be00 Used "Medion/Lifetec/Tevion/Cytron" as manufacturer as in the other 
backends. Used "ScanJet 2300C" as model name as in other backends.
 2005-07-03 13:40:08 +00:00
Stéphane Voltz bce76371c4 - added genesys backend from experimental area 2005-06-27 20:07:45 +00:00
Henning Geinitz 61409cb5bd Removed Samsung SCX-4216F (supported by samsung backend). Dell 1600n has also 
network connection.
 2005-06-19 15:56:23 +00:00
Henning Geinitz d4b441310f Added Canon CanoScan LiDE 500F. 2005-06-12 14:57:46 +00:00
Henning Geinitz 6de5708e4f Added Genius ColorPage-SF600. 2005-06-04 13:33:13 +00:00
Karl Heinz Kremer a245023c10 Added CX-4600 to desc file. 2005-05-31 01:14:55 +00:00
Henning Geinitz 6fd1ee367e Start exposure with the settings from the scanner entry. CIS 
Calibration and exposure uses a broader spectrum now. Expsoure
	  limit is increased to 50 loops. Genius Vivid 4x is reported to
	  work so the UNTESTED label is removed now. Visioneer 7300 is
	  reported to work so the UNTESTED label is removed now. Genius
	  ColorPage Vivid 1200XE: Removed UNTESTED label. Fixed
	  resolutions. Adjusted margins. Fixed color order. Fixed
	  linedistance. Adjusted AFE. Mustek ScanExpress 1248 UB: Fixed
	  margins. Adjusted AFE. Adjusted exposure. Adjusted
	  gamma. Changed status to "complete". Mustek BearPaw 2400 CU
	  Plus: Adsusted exposure and AFE parameters. Hopefully stripes
	  and similar trouble are gone now. Mustek BearPaw 1200 CU:
	  Increased exposure to avoid vertical lines. Updated manual page.
 2005-05-29 19:58:56 +00:00
Henning Geinitz 350c73aba3 Fixed missing link for Genius ColorPage-Slim 1200 USB2. 2005-05-28 18:56:25 +00:00
Henning Geinitz e75fa70160 Added Avision DS310F. Added link for the UMAX Astra 4000. 2005-05-28 18:42:07 +00:00
Jochen Eisinger 66ff43083a 2005-05-25 Jochen Eisinger <jochen@penguin-breeder.org> 
* doc/descriptions/mustek_pp.desc: added scanner
 2005-05-25 13:24:03 +00:00
Henning Geinitz cfb5d0856a Added Konica Minolta Dimage 5400 2. Fixed bus type for Mustek 800 II EP. 2005-05-22 13:38:34 +00:00
Henning Geinitz 7d0d083b8d Mustek BearPaw 1200 CU Plus model 0x21b works now. Fixed firmware and offset 
settings. Calibration is not completely ok yet, however.  Code cleanup for
setup_scan (only one function for all chipsets).  Simplified line mode/pixel
mode setting Updated TODO.  Mustek BearPaw 2448 TA Plus is now only "basic". Too
much trouble for "good".  Removed option "fast preview". By default for preview
mode 8 bits/pixel are used.  Fixed indentation.  Full scan really scans from y=0
on gt6816 scanners now.
 2005-05-20 17:21:56 +00:00
Henning Geinitz e659b95cc0 Added Kodak i30 and Minolta Dual Scan IV. Updated link to Konica Minolta website. 2005-05-16 13:06:05 +00:00
Frank Zago 1cb0c93302 added a few Panasonic scanners 2005-05-15 19:31:43 +00:00
Frank Zago 5ea4825ed7 changed some scanner status from good to minimal 2005-05-15 19:30:52 +00:00
Henning Geinitz ea9ad9a396 Plustek OpticSlim 2400: Fixed list of resolutions. That fixed the 
preview. Removed "untested" warning. Adjusted scan area.  Updated gt68xx.TODO.
Find firmwares independent of capitalization (bug #301580).
 2005-05-07 17:16:30 +00:00
Henning Geinitz b3669f8d6e Added options to set the time after which the lamp of the A3 Pro is shut off 
and to shut it off immediately.
 2005-05-05 17:28:38 +00:00
Henning Geinitz 2cba59f874 Added Dell 922. 2005-05-05 15:53:22 +00:00
Henning Geinitz ceb73a3c54 Removed several Brother scanner which are supported by the brother backend now. 2005-04-29 18:19:48 +00:00
Henning Geinitz 3d75c6a2bd Added ScanPartner 600C (bug #301528). 2005-04-29 17:22:43 +00:00
Gerhard Jaeger f3a311f067 Added UMAX Astranet ia101. 2005-04-27 07:33:54 +00:00
Henning Geinitz a76c30cfd0 Added Canon PIXMA MP110. 2005-04-24 10:44:11 +00:00
Henning Geinitz 0003d79b8e Added Mustek TwainScan II SP (bug #301217). 2005-04-24 10:34:52 +00:00
Henning Geinitz 64c2b9df30 Added and updated several scanners. 2005-04-17 21:36:47 +00:00
Gerhard Jaeger 2b62542f50 Moved some Plustek devices over to the genesys descriptions. 2005-04-01 08:06:31 +00:00
Henning Geinitz 204e51eb70 Removed Microtek ScanMaker 4800 (supported by sm3840 now). 2005-03-16 18:13:27 +00:00
Earle F. Philhower III e1da48acae SM3840: Added SM4800, PPC endianness fix, Makefile deps fix 2005-03-16 08:09:19 +00:00
Henning Geinitz b2852924f2 Added and updated various scanners. 2005-03-13 17:48:27 +00:00
Henning Geinitz 316d7553e4 Added sm3840 backend (from "Earle F. Philhower, III" 
<earlephilhower@yahoo.com>).
 2005-02-20 20:08:04 +00:00
Henning Geinitz 46d59a14aa Removed Genius ColorPage-Vivid Pro II, now in external backend. Added Visioneer 
9000.
 2005-02-20 19:09:24 +00:00
Karl Heinz Kremer 7ab0f24737 Added CX-3600 and 3650 to epson.desc. 2005-02-11 00:53:30 +00:00
Oliver Schwartz 0791d7494a Renamed 'Benq' to 'Benq (Acer)' in desc files 2005-02-06 18:00:41 +00:00
Henning Geinitz 36a7051f52 Added new external backend sm3840. 2005-02-06 16:52:59 +00:00
Henning Geinitz 3ba4918baf Added several scanners. Minor fixes. 2005-02-06 16:33:42 +00:00
Henning Geinitz a11bdc452e Added ColorPage-Vivid Pro II. 2005-01-16 17:38:22 +00:00