mirror
/
sane-project-backends
kopia lustrzana https://gitlab.com/sane-project/backends
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
7 536 Commity
33 Gałęzie
59 Tagi
56 MiB
Wykres commitów

2902 Commity (c6e8e2ab532c8bb33ed0d8d35ec75cf1a38c5543)

Autor SHA1 Wiadomość Data
Stéphane Voltz 1571492fcc fix lineart scanning below 300 dpi for gl124 scanners 
- drop software line interpolation for LINESEL use
 2012-08-08 06:54:11 +02:00
Stéphane Voltz 41733d874e fix genesys issues when using saned 
- fix --clear-calibration option descriptor
- rewrite dynmaic lineart code to fix incorrect returned data length
 2012-08-08 06:54:11 +02:00
Chris Bagwell 8d8eb5ee29 fix missing scan symbol broken in previous kvs20xx commit 2012-08-07 21:56:14 -05:00
Chris Bagwell 67b011b48c Fix duplicate symbol errors in kvs20xx/kvs40xx 
These 2 backends are basically copy&paste of each other and so
have duplicate symbol names.

When using prelink backend option, the duplicates will conflict
and cause compile failure.  Probably even in shared libraries
this can be an issue in some cases.

Solved by converting functions to static when possible and
adding a kvs40xx_/kvs20xx_ prefix in remaining cases.
 2012-08-07 21:01:35 -05:00
Chris Bagwell 8086c98434 Fix unresolved symbols in hp5590_low backend 
It was using byte order utils but not including byteorder.h.
 2012-08-07 21:00:13 -05:00
Chris Bagwell c8dde5e271 Make preload DLL backend's symbols make prototypes 
Most errors were in return values. Some compilers, especially
64-bit ones, are picky about this and fail to compile.
 2012-08-07 20:57:44 -05:00
Rolf Bensch 9996414623 pixma version 0.17.0 2012-07-31 13:27:19 +02:00
m. allan noah 91322ff8e8 Increase kvs1025 max paper size 2012-07-30 21:36:17 -04:00
Stef dd2b18c1d2 fix '5x5 2 fois' test case 
- there is no sane_cancel call betewwen each scans in batch scanning
  so call end_scan when all data has been read from the scanner
 2012-07-30 11:16:51 +02:00
Rolf Bensch 646fdaaa45 all 2012 untested new devices marked as experimental 2012-07-28 14:20:11 +02:00
Rolf Bensch f88fc5c9b4 caps updated for Canon PIXMA MX510 and MX890 2012-07-28 14:09:38 +02:00
Rolf Bensch 9ee5a9f248 new scanners Canon PIXMA E[56]00, MX370, MX4[123]0, MX710 2012-07-28 13:59:17 +02:00
m. allan noah 77c4ea1a7a Various cleanups for release 2012-07-24 21:17:15 -04:00
Nhan Ngo Dinh 8932359312 * Fix hp5590 backend on big-endian platforms 
Little Endian (working)
  =======================
  [hp5590] hp5590_init_scanner
  [hp5590] hp5590_cmd: USB-in-USB: command : 0012
  [hp5590] hp5590_control_msg: USB-in-USB: core data: no
  [hp5590] hp5590_control_msg: USB-in-USB: sending control msg
  [sanei_usb] sanei_usb_control_msg: rtype = 0x40, req = 4, value = 143, index = 0, len = 8
  [sanei_usb] 0000: C0 04 00 12 00 00 32 00

  Big Endian (not working)
  ========================
  [hp5590] hp5590_init_scanner
  [hp5590] hp5590_cmd: USB-in-USB: command : 0012
  [hp5590] hp5590_control_msg: USB-in-USB: core data: no
  [hp5590] hp5590_control_msg: USB-in-USB: sending control msg
  [sanei_usb] sanei_usb_control_msg: rtype = 0x40, req = 4, value = 143, index = 0, len = 8
  [sanei_usb] 000 C0 04 00 12 00 00 00 32

  USB field wLength should always be treated little-endian, last command value during
  verification is received as little-endian as well.

  Thanks to Nhan Ngo Dinh for identifying the issue and providing the patch.

  Signed-off-by: Ilia Sotnikov <hostcc@gmail.com
 2012-07-15 10:47:21 +03:00
Stéphane Voltz 34a6dec3bf minor build number and documentation updates 2012-07-04 06:55:14 +02:00
Stéphane Voltz 7c038dc403 G4050 UTA not ready for SANE 1.0.23 2012-07-04 06:55:14 +02:00
m. allan noah 206e6ed094 Adding new kodakaio backend 2012-06-30 21:28:14 -04:00
Rolf Bensch 42748d44f0 48 bit flatbed scans for CS9000F 2012-06-27 10:52:05 +02:00
Rolf Bensch 76084da110 new scan modes for 48 bit flatbed scanners 
- PIXMA_SCAN_MODE_COLOR_48 for 48 bit color scans
- PIXMA_SCAN_MODE_GRAY_16 for 24 bit grayscale scans
 2012-06-27 10:49:09 +02:00
Rolf Bensch ecc472caff improve scan mode detection 2012-06-26 22:31:31 +02:00
Rolf Bensch 19f4398b45 unused capability PIXMA_CAP_48BIT removed 2012-06-26 21:35:04 +02:00
Rolf Bensch 26c9c5a071 Pixma backend v0.16.4 2012-06-26 15:41:07 +02:00
Stéphane Voltz 0f418d3308 genesys build 84 changelog entry 2012-06-04 21:35:10 +02:00
Stéphane Voltz c81c28c550 improve hotplug/remove detection of device 2012-06-04 21:35:10 +02:00
Stéphane Voltz faa758cb24 gl124 led calibration rework 2012-06-04 21:35:10 +02:00
Stéphane Voltz 2ed73ef3d9 add 2400x4800 dpi mode for LiDE 100, 110 and 210 2012-06-04 21:35:10 +02:00
Stéphane Voltz 9dda72a931 improve led_calibration 
- use led calibration alog from gl847
 2012-06-04 21:35:10 +02:00
Alex Belkin 79240ac397 increment BACKEND_BUILD to distinguish from buggy version 2012-06-03 01:48:45 +04:00
Stéphane Voltz da92353be1 led calibration fix 2012-06-01 07:14:41 +02:00
Stéphane Voltz 0315ded799 reindent get_devices 2012-06-01 06:28:47 +02:00
Stéphane Voltz 15403160f0 changelog entry for genesys build 83 2012-06-01 06:21:14 +02:00
Stéphane Voltz c87bfdc0be align gl124 code on latest gl847 improvements 
- slow back home
- feeding
- unintialized dev->skip
 2012-05-30 06:39:35 +02:00
Stéphane Voltz dd0e0deb9a gl847 sensor and motor modes cleanups 2012-05-29 16:10:11 +02:00
Stéphane Voltz 5f798d84a5 4800 dpi for LiDE 700F 2012-05-29 15:36:22 +02:00
Stéphane Voltz ac3125e752 GL847 move to scan area improvements 
- gl847_feed is OK
- one table scan move is OK
 2012-05-29 14:40:18 +02:00
Stéphane Voltz 3261ea7dc1 doc and changelog update for LiDE 700F support update 2012-05-28 08:24:12 +02:00
Stéphane Voltz 2c370e311f fix hang on warm boot for LiDE 200 2012-05-27 10:43:58 +02:00
Stéphane Voltz e77f93be51 LiDE 700F support completed 2012-05-26 18:38:06 +02:00
Stéphane Voltz 7c20724b1f LiDE 700F WIP 05 fialfixes before data reordering 2012-05-26 09:47:33 +02:00
Stéphane Voltz a3de8f3e4f LiDE 700F WIP 04 
- only reordering must be fixed every thing else is working
 2012-05-26 09:47:33 +02:00
Stéphane Voltz 42713d584d GL847 shading calibration data fix 2012-05-26 09:47:33 +02:00
Stéphane Voltz b9e41f89e1 LiDE 700F WIP 03 
- shading calibration fixed
 2012-05-26 09:47:33 +02:00
Stéphane Voltz 8e22b9418a LiDE 700F WIP 
- shading calibration data not aligned yet
- slow_back home is going back too far during shading calibration
- y_offset_calib not working yet
- intermittent failure at start
 2012-05-26 09:47:33 +02:00
Stéphane Voltz 5ae4f26c42 LiDE 700F WIP 
- 75 to 2400 uncalibrated scans are ok
 2012-05-26 09:46:40 +02:00
Stéphane Voltz 261905e759 GL847/GL124 data interleaving rewrite 
- made data interleaving use an order matrix to handle different sensors
 2012-05-26 09:41:39 +02:00
m. allan noah c72e11a044 Add paper-protect, staple-detect and df-recovery options 2012-05-12 20:43:14 -04:00
m. allan noah 7303da89ee Fujitsu backend v111 
- call send_* and mode_select_* from sane_start
- split read payloads into new debug level
 2012-05-11 21:59:54 -04:00
m. allan noah 924498f608 Fujitsu backend v110 
- correct max_y_fb for fi-62x0 series
- add must_fully_buffer helper routine
- add hwdeskewcrop option, with fallback to software versions
- add 'actual' param to get_pixelsize for post-scan
- add recent model VPD params
- only set params->lines = -1 when using ald without buffering
- fix bugs in background color when using software deskew
 2012-05-09 21:17:33 -04:00
m. allan noah 3a3ff4b05f Add many new inquiry and mode select values 2012-05-09 21:17:32 -04:00
m. allan noah 7269ff0158 correct fb max size 2012-05-09 21:17:32 -04:00
Rolf Bensch 3c5cc2ab08 patch for Canon Pixma MP280 
- PIXMA_EOF mapped to PIXMA_ETIMEDOUT
- maximum resolution reduced to 600dpi
- scanner added to doc files
 2012-05-04 14:27:37 +02:00
Rolf Bensch 9b83cf6dc4 new description for device specific option "source" 2012-04-17 11:02:08 +02:00
Rolf Bensch 641e7f6e2a select first entries of dynamic dpi list and dynamic mode list as default values 2012-04-17 10:07:09 +02:00
Rolf Bensch d723944fae new scanners Canon Pixma MX510 and Canon Pixma MX890 
both are untested
 2012-04-04 18:49:32 +02:00
Rolf Bensch 9fc0ac9d1b color and grayscale negatives scan in TPU mode 
for CS8800F and CS9000F
 2012-04-04 15:15:18 +02:00
Rolf Bensch 9c6afe1b95 cropping y and h to scanable area in TPU mode 
for CS8800F and CS9000F
 2012-04-04 14:35:20 +02:00
Stéphane Voltz a1d3481265 update LiDE 110/210 scan area width 2012-03-29 21:57:31 +02:00
Stéphane Voltz 451badecc8 tune LiDE 110/210 geometry and feeding 
- tune use of gl124_feed at high resolution
- tune LiDE 110/210 geometry
 2012-03-29 21:42:00 +02:00
Mike Kelly d46d19808c Bumped version number. 2012-03-25 15:05:00 -07:00
Mike Kelly 2903d6687c Fixed bug using wrong enum in x/y range check. 
In the "check if x/y ranges are valid" section of the attach() function, the
enum source_mode was being used instead of source_mode_dim.  Since these two
enums are very similar, it's not likely this change will affect anything, but
it does fix the compiler warning.
 2012-03-25 15:04:00 -07:00
Mike Kelly bd7faf0917 Fixed warning about printf and size_t. 2012-03-25 15:03:00 -07:00
Mike Kelly 23ecd9bc5c Reverted AV610 USB IDs and removed AV_INT_STATUS 
Previously I had changed the USB ID of this scanner from 0x0a18 back to
0x0a19, believing a previous commit to have been in error since it went
unmentioned in the commit log and duplicated the AV600U Plus scanner's USB
IDs.  Rolf Würdemann reported that his AV610 scanner used the 0x0a18 ID and
that it wasn't compatible with the AV_INT_STATUS flag.  This commit reverts
my USB ID changes and removes the AV_INT_STATUS flag for the AV610.

However, because this scanner shares its USB ID with the AV600U Plus, it's
possible that the AV600U Plus may require that the AV_INT_STATUS flag be set
in order to function, and thus will break with this change.  The code, as
it's written, isn't designed to deal well with the possibility of shared USB
IDs, so I'll wait to see if this actually becomes a problem before embarking
on the lengthy challenge of getting that to work.
 2012-03-25 15:02:00 -07:00
Mike Kelly fec4800d7d Added firmware checking for HP5370c scanners 2012-03-25 15:01:00 -07:00
Mike Kelly b051c955e3 Added Xerox Documate 632. 2012-03-25 15:00:00 -07:00
Mike Kelly a66812940c Bumped build number. 2012-03-21 21:07:00 -07:00
Mike Kelly 557d60f156 Keep the number of lines to flip as a negative num 
Keep track of the number of lines to flip on the reverse page using a negative
number.  This uses the ill-advised principle of overloading the meaning of a
variable.  Still, it kind of makes sense because these lines are upside down,
so the number should be "upside down" too.  Besides, leaving it as a positive
number trips up the code which does page padding, which would require even
more special case code.
 2012-03-21 21:06:00 -07:00
Mike Kelly 0245820f6b Fix calculations when flipping back of duplex page. 2012-03-21 21:05:00 -07:00
Mike Kelly 983d44887c Corrected the logic to set lines = -1 for ADF mode. 2012-03-21 21:04:00 -07:00
Mike Kelly 33bb529c5f Added sane_reload_devices() to sane_init(). 
Adding sane_reload_devices() to sane_init() required sane_init() to be moved
below the sane_reload_devices() declaration.  This restores the original
functionality present before I split the sane_reload_devices() code out of
sane_init() so that it could be called from sane_get_devices().
 2012-03-21 21:03:00 -07:00
Mike Kelly 11b3604e92 Moved a comment nearer its code. 2012-03-21 21:02:00 -07:00
Mike Kelly 0ab145c316 Skip post-processing when caching flipping duplex 
In a previous patch, I attempted to avoid the possibility of a page remaining
partially inside the ADF unit of a flipping duplex scanner after a scan.
Unfortunately, I introduced a bug where the backside page was accidentally
returned to the client in addition to being cached.  This was because I had
a misunderstanding of the post-processing code.  This patch skips the post-
processing section altogether, avoiding any unnecessary post-processing and
subsequent unwanted output.  The other alternative here was to try to monkey
with the buffers (as is done for LINE deinterlacing), but I felt this would
be harder to implement and even harder to debug in the future.
 2012-03-21 21:01:00 -07:00
Mike Kelly 0e159fc516 Added Gray mode support for Kodak i30 and i40. 2012-03-21 21:00:00 -07:00
Stéphane Voltz 9ffa856022 document end detection fix 2012-03-20 21:57:57 +01:00
Stéphane Voltz 19c43b4184 build number and copyright updates 2012-03-20 21:54:29 +01:00
Stéphane Voltz a61e2be3a5 gl841 sheetfed calibration improvement 
- use maximum gain to detect first white strip for sheetfed calibration
- bpl/wpl correctness
 2012-03-20 21:54:29 +01:00
Gerhard Jäger 67379f2684 Fix batch scanning. 
Apply patch submitted by Elias Oltmanns <eo@nebensachen.de>
 2012-03-19 17:27:54 +01:00
Stéphane Voltz 9b3ea47cf3 handle 4850c model when setting initial registers values 2012-03-19 06:51:12 +01:00
Stéphane Voltz 5a59a1c7ab update HP 4850 geomtry with values provided by Daniël Sonck <dsonck92@gmail.com> 2012-03-19 06:51:12 +01:00
Rolf Bensch 66fb96d9ad Replace index() with strchr(). Bug #313563. 2012-03-06 11:10:44 +01:00
Rolf Bensch d897992226 offset depends on size of windowX 
do not allow negative sum
 2012-02-29 23:42:00 +01:00
Rolf Bensch 4fb29c00f2 new device specific option 'theshold_curve' 2012-02-29 11:40:18 +01:00
Rolf Bensch e3e2ca1aab constraint range for threshold 2012-02-27 15:31:37 +01:00
Rolf Bensch aaa97ac050 new scanner Canon imageCLASS MF4410 from Vasiliy Olekhov 2012-02-27 10:25:00 +01:00
Rolf Bensch 9513986d96 MX360: no pixel reorder at high dpi 2012-02-21 21:24:09 +01:00
Rolf Bensch 9d931359d6 new device specific option 'gamma' 2012-02-16 19:58:23 +01:00
Rolf Bensch a749b0f48a enable threshold if scanner capability is PIXMA_CAP_LINEART 2012-02-16 18:11:52 +01:00
Rolf Bensch 050707e804 lineart: custom_gamma always enabled 2012-02-16 18:05:42 +01:00
Nils Philippsen 4911e3e1a0 fix install-lockpath target 
Actually, current mkinstalldirs can't set users or groups anymore. Don't
attempt to do so.
 2012-02-11 19:44:53 +01:00
Nils Philippsen 7de900d057 improve install-lockpath target 
Make install process robust against problems with setting group on the
sane lock directory. This can e.g. happen if packaging sane-backends and
building as a user other than root.
 2012-02-11 19:06:44 +01:00
Rolf Bensch dde5782ede 1 bit B/W lineart for CIS scanners with c=1 
update ChangeLog for previous 1 bit B/W lineart commit
 2012-02-09 09:57:19 +01:00
Rolf Bensch d8def30f36 updated device definition for mx360 2012-02-07 07:48:59 +01:00
Rolf Bensch 2ffa16dcdd new scanner Canon PIXMA MX360 2012-02-06 16:48:00 +01:00
Rolf Bensch 974ee17cf4 1 bit B/W lineart for pixma_mp150 and pixma_810 subdrivers 2012-02-03 22:05:32 +01:00
Rolf Bensch bd379a59aa set 600 dpi when switching the source 2012-02-03 21:26:50 +01:00
Rolf Bensch 55e7079002 allow TPU scans at 9600 dpi 2012-02-03 21:15:03 +01:00
Rolf Bensch 873eba4fa4 set pixma version to 0.16.3 2012-02-03 15:22:53 +01:00
Rolf Bensch 4b86c157a3 script to generate pixma_sane_options.c and pixma_sane_options.h 
from pixma.c
 2012-02-03 15:12:01 +01:00
Rolf Bensch 5e87569ac4 modify dpi_list dependent on different scanner capabilities 
for normal (flatbed) and ADF/TPU modes.
 2012-01-31 11:39:53 +01:00
Rolf Bensch 6aeb05275e MX882 belongs to MX880 Series 
update ChangeLog for previous version
 2012-01-23 11:21:02 +01:00
Rolf Bensch e9fd4b2d20 api / doc use the product name PIXMA MX882 instead of MX880 
update ChangeLog for previous commit
 2012-01-23 10:08:18 +01:00