- initial support for DR-5020
- use ppl_mod instead of Bpl_mod, apply to all modes
- invert logic of read_panel tracking
- add ability to disable read_panel()
- automatically disable read/send_panel if unsupported
- don't center window when using flatbed
- improve request sense error messages
- enable flatbed for all known models
- ad usb ids for DR-6030C, CR-135i & CR-190i
- moved DR-2020U to unsupported.desc
- initial support for DR-3080 and DR-5060
- add code to clamp scan width to an arbitrary byte width boundary
- add code to prevent setting of brightness/threshold/contrast
- don't send dropout color command on non-color scanners
-) LAN and USB communication
-) SNMP LAN auto-detection (using libsnmp, added configure check!)
-) Based on the epson2 backend, with many structural changes
-) B/W, Gray, Color scanning works in 150/300/600dpi (full-page
color scan only possible with <=300dpi)
-) The timeouts (SNMP, scan data, other data) are configurable in the
magicolor.conf file
-) Keeps list of known scanners in sane_get_devices, does not destroy
existing handles; Also correctly calls sanei_usb_init.
Macport version of latex does not intall changebar
package referenced by sane.tex.
Commented out this reference since its not actually
used by any docs. This should allow generating
with a wider range of latex versions.
Also added quotes around TEXINPUTS (where to find
our custom distributed html.sty) since OSX often
has spaces in path names.
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Added support for the Avision AV210D2+ scanner. This is the first scanner
to require the use of the gray filter bits, so code was added to enable them.
Regenerated description file to reflect this change.
create a place holder for low level commands
move low level functions to genesys_low.c
GL124 progresses
enable genesys_low debug and add DAC for LiDE 110
gl124 WIP
- gl847 cleanups
- genesys_low refactor
- gl124 starting version
GL124 WIP
- read scancnt/fedcnt,valid words coded
- memory layout coded
LiDE110 WIP
GL 124 WIP
- definition and use of get/set double/triple
- define register names
all mods done, ready to test
set fe OK
GL124 WIP : ready to test scans
GL124 WIP
GL124 WIP
- fixed analog fe issue: don't put afe regs in global set
GL124 : first light at 300 dpi
GL124 WIP
- 300 and 600 uncalibrated mostly ok (x coordinate rounding)
- 150 and 75 OK x-wise, y to be solved
solved rounding errors for gl124
re-add 400, 200 and 100 dpi modes
GL124 : tous x dpi OK
before adding line cropping
GL124 : line cropping almost finished
GL124 WIP : working line deletion
compute step rework
GL124 WIP : high speed table for dpi <= 300
move to scan area working
line skipping fix
new slope table for 600 dpi base
geometry and movement tuned
GL124 WIP : shading calibration almost working
working 600 dpi shading
GL124 : working shading calibration for all modes but 1200 dpi
working 1200 dpi shading
beta 1 of GL124 support
last tuning
update genesys.desc for LiDE 110
motor slope and start area tuning
shading coefficient computing clean up
add support for GL124 based CanoScan LiDE 110
feed almost OK up to 300 dpi
feeding is fixed
all issues fixed
the same and already work, but this change will reflect that fact on the
website.
- Generated a new version of doc/descriptions/avision.desc from avision.c.
the AV610, and added a comment for the @V5100 in avision.c.
- Generated a new version of doc/descriptions/avision.desc from avision.c.
This restores information lost with my last update. I've intentionally
seperated these changes so that they can be more easily understood.
but somehow got re-added again.
- Generated a new version of doc/descriptions/avision.desc from avision.c.
This change merely updates the .desc file, the driver code remains unchanged.
m. allan noah