Stéphane Voltz
406ecd0cda
genesys desc update
2010-12-24 08:51:44 +01:00
Stéphane Voltz
91832dccb3
add X74 support to lexmark backend
...
- patch from "Torsten Houwaart" <ToHo@gmx.de>
2010-12-24 08:02:44 +01:00
Mike Kelly
99853b5360
Bumped build number
2010-12-23 20:50:46 +09:00
Mike Kelly
e422d4456d
Removed "regularly tested" from various scanners
...
These scanners are no longer tested regularly by the maintainter, and should
not be listed as such in the description file.
2010-12-23 20:25:21 +09:00
Mike Kelly
9920c2b324
Fixed USB id for Avision FB2080E
...
Added leading zero to the USB id of Avision FB2080E. Regenerated description
file.
2010-12-23 20:24:50 +09:00
Mike Kelly
24237f2562
Added support for the Avision AV210D2+ scanner
...
Added support for the Avision AV210D2+ scanner. This is the first scanner
to require the use of the gray filter bits, so code was added to enable them.
Regenerated description file to reflect this change.
2010-12-23 19:47:56 +09:00
Mike Kelly
0233072a5e
Removed a duplicate entry for Avision AV210C2
...
Removed a duplicate entry for Avision AV210C2 and Regenerated the
description file.
2010-12-23 19:38:07 +09:00
Stéphane Voltz
98c5d9454f
LiDE 210 tuning
...
- dynamic lineart not enabled by default
2010-12-16 22:10:37 +01:00
Stéphane Voltz
35f133c59b
add an device entry for LiDE 210
2010-12-15 06:24:55 +01:00
Stéphane Voltz
3d89a6f880
add new gl124 asic
...
create a place holder for low level commands
move low level functions to genesys_low.c
GL124 progresses
enable genesys_low debug and add DAC for LiDE 110
gl124 WIP
- gl847 cleanups
- genesys_low refactor
- gl124 starting version
GL124 WIP
- read scancnt/fedcnt,valid words coded
- memory layout coded
LiDE110 WIP
GL 124 WIP
- definition and use of get/set double/triple
- define register names
all mods done, ready to test
set fe OK
GL124 WIP : ready to test scans
GL124 WIP
GL124 WIP
- fixed analog fe issue: don't put afe regs in global set
GL124 : first light at 300 dpi
GL124 WIP
- 300 and 600 uncalibrated mostly ok (x coordinate rounding)
- 150 and 75 OK x-wise, y to be solved
solved rounding errors for gl124
re-add 400, 200 and 100 dpi modes
GL124 : tous x dpi OK
before adding line cropping
GL124 : line cropping almost finished
GL124 WIP : working line deletion
compute step rework
GL124 WIP : high speed table for dpi <= 300
move to scan area working
line skipping fix
new slope table for 600 dpi base
geometry and movement tuned
GL124 WIP : shading calibration almost working
working 600 dpi shading
GL124 : working shading calibration for all modes but 1200 dpi
working 1200 dpi shading
beta 1 of GL124 support
last tuning
update genesys.desc for LiDE 110
motor slope and start area tuning
shading coefficient computing clean up
add support for GL124 based CanoScan LiDE 110
feed almost OK up to 300 dpi
feeding is fixed
all issues fixed
2010-12-14 18:23:23 +01:00
Mike Kelly
4fcd69a7da
- Added the full range of the HP 8300 series scanners. These scanners are all
...
the same and already work, but this change will reflect that fact on the
website.
- Generated a new version of doc/descriptions/avision.desc from avision.c.
2010-12-09 16:25:32 +09:00
Mike Kelly
6a49df4496
- Added Xerox DocuMate262i.
...
- Generated a new version of doc/descriptions/avision.desc from avision.c.
2010-12-09 16:23:18 +09:00
Mike Kelly
12ce47285d
- Fixed what appears to have been a fat-fingered change to the USB id for
...
the AV610, and added a comment for the @V5100 in avision.c.
- Generated a new version of doc/descriptions/avision.desc from avision.c.
This restores information lost with my last update. I've intentionally
seperated these changes so that they can be more easily understood.
2010-12-09 16:22:03 +09:00
Mike Kelly
1b596780e5
- Removed obsolete file backends/avision.desc (again). It was deleted before,
...
but somehow got re-added again.
- Generated a new version of doc/descriptions/avision.desc from avision.c.
This change merely updates the .desc file, the driver code remains unchanged.
2010-12-09 16:19:05 +09:00
Mike Kelly
12930627d3
- Adding myself as maintainer.
...
- Bumping version number.
2010-12-09 16:12:39 +09:00
Julien BLACHE
8e042230e6
Add SCSI IDs for the Perfection 3200 (GT-9800) via FireWire
2010-12-06 18:03:47 +01:00
m. allan noah
239a2f7c22
Fujitsu backend v104
...
- never request more than s->buffer_size from scanner
- silence noisy set_window() calls from init_interlace()
2010-11-25 09:43:37 -05:00
m. allan noah
9f15c2534d
fujitsu backend v103
...
- remove compiled-in default config file
- initial support for new fi-6xxx machines
- mark S300M support as good
2010-11-23 16:56:13 -05:00
Olaf Meeuwissen
da42dfa8eb
Update epkowa.desc for iScan 2.26.1
2010-11-19 18:23:19 +01:00
Stéphane Voltz
4d0cd3c5b1
add -A/--all-options to scanimage for exposing all control options of a
...
backend
2010-11-06 08:00:37 +01:00
Julien BLACHE
9b229f06b9
Add SCSI IDs for ScanJet 4c
2010-10-31 10:20:53 +01:00
Julien BLACHE
2c69d7c19f
Resync xerox_mfp desc file & config file
2010-10-30 14:54:36 +02:00
Julien BLACHE
27b1f42b7f
Add Samsung SCX 4824 & 4825FN
2010-10-30 14:47:39 +02:00
Stéphane Voltz
7490f08ee4
update G4010/G4050 status
2010-10-13 06:49:03 +02:00
Alex Belkin
842c98d204
Added Samsung SCX-4500W scan over network support for xerox_mfp backend (by Alexander Kuznetsov).
...
autoconf and automake reconfigure.
2010-09-30 15:11:56 +04:00
Reinhold Kainhofer
093fff631c
Fix SANE_CONFIG_DIR handling, use it for dll.d/; Add sanei_config_get_paths
...
* include/sane/sanei_config.h sanei/sanei_config.c: Add function
sanei_config_get_paths to obtain all configuration pathes (from env var
SANE_CONFIG_DIR and default paths); fix pointers to invalid/freed
strings when SANE_CONFIG_DIR is set
* backend/dll.c: When searching for the dll.d/ directory, also use
the SANE_CONFIG_DIR env variable.
2010-09-18 10:35:35 +02:00
Julien BLACHE
2ede166550
Update for iScan! 2.26.0
2010-09-17 19:38:26 +02:00
Alex Belkin
946871bbb3
add Xerox WorkCentre 4118 Series usb id
2010-09-15 19:35:41 +04:00
Stéphane Voltz
5bfb117c93
unsupported.desc update
2010-09-13 21:52:10 +02:00
Stéphane Voltz
a8eaac4a8d
update HP3690 status to supported
2010-09-13 06:19:47 +02:00
Stéphane Voltz
00574ba699
Merge branch 'genesys'
2010-09-12 21:41:51 +02:00
Stéphane Voltz
09f099ec03
update for new sofware features
2010-09-12 21:40:25 +02:00
Nicolas Martin
ea1336e71f
pixma: several updates for MP375R, MP390, MP460 and docs by Gernot Hassenpflug.
...
modified: ChangeLog
modified: backend/pixma_mp150.c
modified: backend/pixma_mp730.c
modified: doc/descriptions/pixma.desc
modified: doc/sane-pixma.man
2010-09-08 22:08:32 +02:00
Nicolas Martin
8b87049970
Merge branch 'master' of ssh://git.debian.org/git/sane/sane-backends
2010-09-05 09:46:20 +02:00
Stéphane Voltz
03adcd25df
genesys build 32 update
2010-09-04 07:31:13 +02:00
Nicolas Martin
00bd28bdef
pixma: documentation updates for supported devices, as reported by Gernot Hassenpflug
2010-09-02 18:18:53 +02:00
Nicolas Martin
2fccb8ffbe
pixma: changes supplied by Gernot Hassenpflug for
...
- supporting Lineart on several Pixma devices
- descriptions updates
2010-09-01 21:18:14 +02:00
Stéphane Voltz
889a3585ee
support for Panasonic KV-SS080
2010-08-31 22:13:42 +02:00
Alex Belkin
8e3528baab
added SCX-4623 usb id
2010-08-10 06:42:40 +04:00
Nicolas Martin
52cd1d7d5b
pixma: add support for PIXMA MX870, updated docs.
...
declared PIXMA MF8030, but not yet working.
modified: ChangeLog
modified: backend/pixma_imageclass.c
modified: backend/pixma_mp150.c
modified: doc/descriptions/pixma.desc
modified: doc/sane-pixma.man
2010-07-22 07:56:13 +02:00
Julien BLACHE
126c70d616
Add :scsi keyword for the Perfection 2450 connected via FireWire
2010-07-15 18:22:34 +02:00
Alesh Slovak
02cecbd75b
Update epkowa.desc for iScan 2.25.0
2010-07-12 12:16:53 +02:00
Nicolas Martin
3b1543faf4
pixma: changes for PIXMA MX350 support, usb and ethernet.
...
modified: ChangeLog
modified: doc/descriptions/pixma.desc
modified: doc/sane-pixma.man
2010-07-04 21:22:00 +02:00
Nicolas Martin
bb346c0725
pixma: description update for ImageClass MF6500 series
...
modified: doc/descriptions/pixma.desc
2010-07-03 17:38:43 +02:00
Nicolas Martin
5eb30a38c3
pixma: doc update for support to ImageClass MF6550.
...
modified: ChangeLog
modified: doc/descriptions/pixma.desc
modified: doc/sane-pixma.man
2010-07-03 00:03:50 +02:00
Nicolas Martin
75878ea6d6
pixma: thanks to Dan McGee, support for PIXMA MX340
...
modified: backend/pixma_mp150.c
modified: doc/descriptions/pixma.desc
modified: doc/sane-pixma.man
2010-07-01 22:28:11 +02:00
Stéphane Voltz
198eda5cdc
Canon LiDE 100/200 support improvments
...
- add 100, 200 and 400 DPI resolutions
- disable true since it isn't working yet
- man page update
2010-06-18 06:42:44 +02:00
Stéphane Voltz
d97638a107
Canon LiDE 200 support up to 1200 DPI
2010-06-15 21:12:32 +02:00
m. allan noah
37eba9dcac
add usb ids for SCX-4600
2010-06-15 09:54:27 -04:00
m. allan noah
ed434097f7
Two scanners have SCSI interface
2010-06-09 20:04:49 -04:00
m. allan noah
3b84595cf5
Remove models supported by new kvs20xx backend
2010-06-09 19:53:28 -04:00
m. allan noah
4659c56667
correct manpage link
2010-06-09 19:47:04 -04:00
m. allan noah
e7efa77aa5
Add new kvs20xx backend from Panasonic, for KV-S202xC and KV-S204xC
2010-06-09 16:31:00 -04:00
Stéphane Voltz
a36121c1c3
changelog and doc update for genesys backend
2010-06-03 20:57:06 +02:00
m. allan noah
bafdabf031
removed duplicate scanner
2010-05-24 15:43:37 -04:00
m. allan noah
909919d0d5
add Fujitsu fi-5015C
2010-05-24 13:44:15 -04:00
m. allan noah
24a180c988
adding USB IDs for Fujitsu fi-4110EOX
2010-05-24 13:33:33 -04:00
Pierre Willenbrock
ff187e38f3
Change status of CanoScan LiDE 40 from untested to good
2010-05-03 22:17:31 +02:00
m. allan noah
3adab142b1
* po/Makefile.in: include POTFILES and LINGUAS in DIST
...
* doc/releases.txt: more git notes
2010-04-27 04:09:15 -04:00
m. allan noah
db465ae08b
reopen development with v1.0.22git
2010-04-25 23:48:14 -04:00
m. allan noah
7b0a6ecd04
minor tweaks
2010-04-25 23:29:39 -04:00
m. allan noah
ceb03e36c7
setup for release 1.0.21
2010-04-25 23:28:52 -04:00
Chris Bagwell
51e1e46a83
Update epkowa.desc with latest values from iscan
...
Updated 4 pre-existing SCSI models with commonly used
model names. This allows wider range of Epson SCSI scanners
to be correctly detected using auto-generated hal and udev
files. This benefits epkowa, epson2, and epson backends.
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
2010-04-20 22:13:52 -05:00
m. allan noah
7701eeb5ca
add a little credit
2010-04-16 15:26:10 -04:00
m. allan noah
9c6d774483
kvs1025 backend v3, usb bugfixes
2010-04-16 15:13:36 -04:00
m. allan noah
afd2d00498
Strobe XP 300 now supported
2010-04-16 14:48:32 -04:00
Nicolas Martin
c27108d348
pixma: changes from Gernot Hassenpflug for Canoscan 8800F support.
...
backend/pixma_mp150.c: changes for Canoscan 8800F, debug clean-up code
backend/pixma_io_sanei.c: debug clean-up code
doc/descriptions/pixma.desc, doc/sane-pixma.man: doc updates for Canoscan 8800F
2010-04-12 22:45:58 +02:00
Chris Bagwell
0109113ea3
Don't include -lresmgr in all backends
...
resmgr library is only used (optionally) by
sanei_usb and sanei_scsi. So only need to
link it in for those backends. This was
a stray piece from initial cleanup of LIBS
in sane-backends 1.0.20.
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
2010-04-06 09:49:58 -05:00
m. allan noah
93bba440b0
convert kvs1025 backend from libusb to sanei_usb, and enable it
2010-03-26 00:01:16 -04:00
Nicolas Martin
a94ff26045
pixma: fix color shifts for Pixma MP990, updated descs for several models.
2010-03-15 22:16:47 +01:00
Stéphane Voltz
faaf808845
changelog and desc entry for genesys backend update
2010-03-15 06:39:37 +01:00
Stéphane Voltz
d7de4ed29f
genesys desc updates
2010-03-04 06:41:01 +01:00
Stéphane Voltz
62d2633649
fix author name accent + caps
2010-03-01 21:48:24 +01:00
Chris Bagwell
1903d646b2
align autoconf/automake output to common version.
...
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
2010-02-27 23:27:32 -06:00
m. allan noah
778c21922d
add S1500M entry by Harald Weis
2010-02-27 21:02:53 -05:00
m. allan noah
54a84f2053
Use standard gettext infrastructure, from Adi Roiban
2010-02-27 20:51:31 -05:00
m. allan noah
bee987877d
new external backend
2010-02-22 23:37:25 -05:00
Julien BLACHE
73eaee3e6f
Update scanner lists for epkowa (iscan 2.24.0)
2010-02-22 17:37:03 +01:00
Stéphane Voltz
b37621d86a
addition of the p5 backend to the distribution
2010-02-15 22:15:43 +01:00
Stéphane Voltz
982bf43a64
p5 (Parallel Port Primax PagePartner) backend files addition
2010-02-15 06:46:04 +01:00
m. allan noah
f8b3f9c7ab
s/AV220-G/AV220G/
2010-02-13 13:33:58 -05:00
m. allan noah
03012a77cc
re-order new entries
2010-02-13 13:29:59 -05:00
m. allan noah
1465e3b12e
updated settings for Visioneer 9450
2010-02-13 13:09:38 -05:00
m. allan noah
5d12e39b7c
Adding new files for new kvs1025 backend
2010-02-12 22:23:14 -05:00
m. allan noah
07cd144f72
Add new kvs1025 backend from Panasonic Russia, Ltd.
2010-02-12 22:06:36 -05:00
Stéphane Voltz
150f001b0a
hp3670 support tuning
2010-02-12 14:43:59 +01:00
m. allan noah
5d98d9a089
hpaio.desc: updated from hplip v3.9.12
2010-02-10 22:51:40 -05:00
m. allan noah
cc1776b571
don't fail if sanei_scsi_open gives smaller buffer than asked for
...
minor doc updates
2010-02-10 22:38:37 -05:00
m. allan noah
700dd07e38
add Dell A940 and correct manpage name
2010-02-10 21:08:42 -05:00
m. allan noah
95aeeee4fd
basic support for 600C
2010-02-10 16:15:53 -05:00
Stéphane Voltz
49450cffdc
added G2410
2010-02-10 21:26:23 +01:00
m. allan noah
422a45b459
another pointless commit
2010-02-10 14:58:51 -05:00
m. allan noah
c8f2600946
pointless changes to test git hooks on server
2010-02-10 14:52:03 -05:00
m. allan noah
2df3c10817
* doc/.gitignore, doc/Makefile.am, doc/Makefile.in:
...
- added new targets for scanner search engine db
* doc/releases.txt: improved doc
* doc/saned.man: clean typos
* tools/sane-desc.c: removed NAME= from udev rules (deprecated)
2010-02-10 14:27:27 -05:00
m. allan noah
bb861109c9
cleanup manuals, .desc files, copyrights and #includes
2010-02-09 22:44:08 -05:00
m. allan noah
fcc43f328c
cleaned #include lines and copyrights. added new models.
2010-02-09 22:02:08 -05:00
Nicolas Martin
7c10b735b5
pixma: updated docs for supported model ImageCLASS MF4350d.
2010-02-02 21:39:57 +01:00
Stéphane Voltz
34a0c8c5ff
entry for Xerox Travel scanner 100
2010-01-30 14:21:48 +01:00
Stéphane Voltz
a58975deef
entry fro Xero Travel Scanner 100
2010-01-30 14:20:21 +01:00
Nicolas Martin
939acce04a
pixma: usb timeouts to 20 sec as needed by ImageClass MF3240, source code comments and documentation updates for this model.
...
- backend/pixma_io.h: usb timeouts change
- backend/pixma_imageclass.c, doc/sane-pixma.man, doc/descriptions/pixma.desc: doc and comments updates.
2010-01-29 21:39:33 +01:00
Julien BLACHE
8177af4168
Mark HP ScanJet IIp (C1790A) as a Processor-type SCSI device
...
Patch from Ondrej Zary <linux@rainbow-software.org>.
2010-01-27 22:06:30 +01:00
Stéphane Voltz
ece640cc63
add Visioneer OneTouch 7100
2010-01-19 21:39:29 +01:00
Stéphane Voltz
9040d069b2
type fix
2010-01-19 21:39:29 +01:00
Stéphane Voltz
1f380dc805
add visioneer OneTouch 7100
2010-01-19 21:39:29 +01:00
Alex Belkin
80f5e4eb31
add CLX-3175FW
2010-01-19 21:25:18 +03:00
Stéphane Voltz
e3f3717664
udpate options and supported models
2010-01-13 06:55:42 +01:00
Alessandro Zummo
c07fb15569
epson2: device list sync with iscan 2.23.0
2010-01-09 18:17:13 +01:00
Nicolas Martin
2482974b96
pixma: updated documentation for MP490 and MP550 (supported models).
2010-01-08 21:09:22 +01:00
Nicolas Martin
f9e6dc5ce1
pixma: some routine maintenance updates to backend and documentation.
2009-12-26 14:40:39 +01:00
Julien BLACHE
c23157c62a
Update epkowa.desc for Image Scan! for Linux 2.23.0
...
Patch from Alesh Slovak.
2009-12-15 18:15:49 +01:00
Nicolas Martin
3fc69a358e
pixma: updated backend, docs and desc for support to MP560 and MF4330d/ADF
...
backend/pixma_imageclass.c: added PIXMA_CAP_ADF to model imageclass MF4320, to support MF4330d
backend/pixma_mp150.c: removed untested state for MP560 (comment)
doc/descriptions/pixma.desc, doc/sane-pixma.man: doc update for both MP560 and MF4330d
2009-12-09 21:49:19 +01:00
Nicolas Martin
7d659f87df
pixma: bumped minor, added compilation type debug message, updated MX330 doc.
...
- doc/descriptions/pixma.desc
doc/sane-pixma.man
backend/pixma_mp150.c
updated doc and desc (support for MX330)
- backend/pixma.h
backend/pixma.c
bumped backend minor
2009-12-06 15:33:10 +01:00
Stéphane Voltz
ef4c5102ca
add support for Ambir/Syscan DS685
2009-12-05 07:26:25 +01:00
Nicolas Martin
13641ac5b3
pixma: fix for PTHREAD compilation, add support for MP990 in docs.
...
- backend/pixma.c: fix end of scan buggy exit when compiled with USE_PTHREAD/-lpthread
- backend/pixma_mp150.c, doc/descriptions/pixma.desc, doc/sane-pixma.man:
change support to complete for MP990 in documentation, as reported by Jean-Michel Pouré.
2009-11-28 15:11:05 +01:00
Stéphane Voltz
0415d47567
update status of 3 sheetfed scanners
2009-11-28 13:34:23 +01:00
Nicolas Martin
96c192d1f3
pixma: updated Pixma MP250 status to supported. Changed desc status from good to complete for well supported models.
2009-11-19 22:12:32 +01:00
Stéphane Voltz
844c1da642
calibration and configuration fix
...
- fixed genesys.conf for 2 missing models
- updated desc file
- definitive fix for shhetfed calibration
2009-11-16 21:30:09 +01:00
Julien BLACHE
e63118298a
Add the Perfection 636 SCSI scanner w/IDs
2009-11-14 10:36:53 +01:00
Stéphane Voltz
38359727fd
genesys documentation update
2009-11-06 21:24:41 +01:00
Nicolas Martin
db1a049706
pixma: declared Pixma MP550 (yet untested), updated docs.
...
modified: ChangeLog
modified: backend/pixma_mp150.c
modified: doc/descriptions/pixma.desc
modified: doc/sane-pixma.man
2009-10-28 23:49:13 +01:00
Nicolas Martin
f2c663ffb1
pixma: fix MP830 ADF shifted lines, add support for I-SENSYS MF4320d to pixma.desc
2009-10-22 22:01:54 +02:00
Louis Lagendijk
0ba8b150e8
Added networking details to doc/sane-pixma.man
2009-10-22 16:05:22 +02:00
Nicolas Martin
a18c3fd41a
pixma: added I-SENSYS MF4320d and updated doc, for this model and MP390.
2009-10-21 21:39:27 +02:00
Nicolas Martin
6eddc1d274
pixma: updated doc to include support for MP270 and ImageClass MF3110
2009-10-18 15:04:39 +02:00
Nicolas Martin
b0303393ec
pixma: fixes Gen 4 XML error code, support for ImageClass MF4380dn, bump backend version
...
- backend/pixma_mp150.c: some error condition fixes to Generation 4 (MP640, ...) XML code
- backend/pixma_imageclass.c: added support for ImageClass MF4360dn-MF4390dn
- include/pixma.h: bumped backend version to 0.16.1
- doc/descriptions/pixma.desc, doc/sane-pixma.man: doc updates
2009-10-18 13:02:14 +02:00
Nicolas Martin
c2f0346983
pixma: Changes to include new XML dialog for new 2009 PIXMA models,
...
- New XML dialog encapsulates classic Generation 3 PIXMA protocol.
- Tested succesfully on an MP640, both on usb and wifi.
2009-10-16 22:52:14 +02:00
Julien BLACHE
00baf0fc15
Update epkowa.desc for iScan! 2.22.0
2009-10-14 12:29:10 +02:00
chris@cnpbagwell.com
249a568615
Remove manual deletion of $docdir.
...
Allows "make distcheck" to pass with current version of automake
being used. Current automake cleans up after itself fine.
2009-09-29 21:23:20 -05:00
m. allan noah
3c0b4649bd
epkowa.desc updated for iscan release 2.21.0
2009-09-17 20:47:33 -04:00
Nicolas Martin
ed96067735
pixma backend: Updated documentation for MP260 and new models:
...
- Pixma MP260 confirmed to be supported.
- descriptions updates for 5 new models recently declared in backend.
2009-09-16 22:13:23 +02:00
m. allan noah
3a26db083f
Add sanei_magic image processing library
...
Initial support for:
Deskew
Autocrop
Despeckle
2009-09-14 13:13:31 -04:00
Alex Belkin
24d73f8fe6
Added WorkCentre 3119 Series for xerox_mfp backend.
2009-09-07 06:01:31 +04:00
Julien BLACHE
b81f6fa9c7
Reorder entries by USB IDs.
2009-09-06 13:44:26 +02:00
Julien BLACHE
7cceb801b3
Add Samsung SCX-4300 as a supported device by the xerox_mfp backend.
2009-09-06 13:42:54 +02:00
Nicolas Martin
b7800eeac5
pixma backend: updates for ImageClass MF3110 and MF4660, and Pixma MP980, and doc updates.
...
- MF3110: fix interrupt messages handling.
- MF4660: added support for this ImageClass device.
- MP980: Following a report, tuned the color planes shifting values.
- All: Documentation updates.
2009-09-06 10:31:40 +02:00
Nicolas Martin
15b3ad0cc8
pixma backend: Updated description for MP830, reported to be fully supported.
2009-08-27 22:09:08 +02:00
m. allan noah
11c7f29d7d
updated info for Canon LiDE 100 and 700F
2009-08-19 09:28:48 -04:00
m. allan noah
cefcfcc32e
Add credits text
2009-08-17 09:49:22 -04:00
m. allan noah
504547028b
Fujitsu backend v96, support hardware automatic length detection
...
- split sane_get_parameters into two functions
- remove unused code from get_pixelsize
- support hardware based auto length detection
- various status and comment updates
2009-08-07 16:49:58 -04:00
Nicolas Martin
8b59935530
pixma backend: few cosmetic documentation updates.
2009-08-03 21:06:03 +02:00
m. allan noah
e59454b9f7
Bump backend version number, improve manpage, add credits
2009-07-30 10:13:59 -04:00
m. allan noah
94f5e356c6
add link to hp4600C software
2009-07-28 23:33:50 -04:00
Nicolas Martin
5ff8e7b9fa
Updated pixma backend desc for Pixma MX860
2009-07-28 21:58:22 +02:00
Nicolas Martin
a7e4c19738
Fixed declarations for MX320, MX330 and MX860 in pixma backend, and doc update.
2009-07-25 18:38:13 +02:00
m. allan noah
ac9d862925
add HP ScanJet IIcx 'scsi' line
2009-07-16 11:50:07 -04:00
Nicolas Martin
cb199d7f66
Declared new models (yet untested) Pixma MX330 and MX860 in pixma backend, bump minor version number.
...
- backend/pixma_mp150.c: declared new models (yet untested) Pixma MX330 and MX860.
- doc/descriptions/pixma.desc, doc/sane-pixma.man: updated docs.
- backend/pixma.h: bump backend minor version number.
2009-07-02 22:07:39 +02:00
m. allan noah
079080a8b0
set 5 machines to status complete
2009-06-29 21:53:10 -04:00
m. allan noah
c6fa278557
minor updates to unsupported Canon scanners
2009-06-29 21:30:32 -04:00
m. allan noah
ad09706aa9
hide new frame types and latex foo
2009-06-23 00:28:53 -04:00
m. allan noah
4a91ba9e8f
Merge branch 'master' of ssh://kitno-guest@git.debian.org/git/sane/sane-backends
2009-06-22 23:10:35 -04:00
m. allan noah
b916eb3ff7
add new flag to desc file
2009-06-22 23:09:21 -04:00
m. allan noah
163f5fa345
New kodak backend, and all the autofoo changes required to build it
...
- remove some Kodak machines from unsupported list
- add sane-kodak manpage
- add kodak.desc
2009-06-22 23:06:22 -04:00
Nicolas Martin
a05e6e078b
ImageCLASS MF5770 grayscale mode and D480 duplex ADF support.
...
- backend/pixma_imageclass.c: Added duplex ADF scan for Canon ImageCLASS D480
- backend/pixma_mp730.c:
. Fixed ImageCLASS MF5770 grayscale scanning.
. Declared ImageCLASS MF5730 and MF5750 (similarity with MF5770).
- doc/descriptions/pixma.desc: Documentation updates.
2009-06-22 21:31:30 +02:00
Nicolas Martin
0e7b032525
Add Canon imageCLASS D480 support to the pixma backend.
...
- backend/pixma_imageclass.c: new model imageCLASS D480 declaration.
- doc/descriptions/pixma.desc and doc/sane-pixma.man: documentation update.
2009-06-20 15:05:57 +02:00
m. allan noah
59ecbe3521
bump backend version number
2009-06-17 16:16:54 -04:00
m. allan noah
47bd5aec2c
bump backend version number
2009-06-17 16:12:44 -04:00
Nicolas Martin
5938421e25
Declared Pixma MX320 in the pixma backend. Yet untested.
...
- backend/pixma_mp150.c: added MX320
- doc/descriptions/pixma.desc and doc/sane-pixma.man: documentation update for MX320
2009-06-16 22:33:17 +02:00
Nicolas Martin
aa7a54199d
Fix for MP800R network scan and documentation update for MF5770.
...
- backend/pixma_mp150.c:
Thanks to Vladimir Andreev patch, fix network scan for MP800R.
- doc/descriptions/pixma.desc and doc/sane-pixma.man:
. Documentation updates for latest MF5770 changes.
. Note: MF5770 grayscale mode appears to require some more work.
2009-06-14 18:37:11 +02:00
Alex Belkin
a937e22bd7
backend version increment
2009-06-13 17:35:32 +04:00
Alex Belkin
00456d00a6
typo
2009-06-13 17:16:45 +04:00
Alex Belkin
f3e63b4e4d
usbids for some Samsung devices
2009-06-13 17:15:06 +04:00
Alessandro Zummo
cd2f3cc6d8
epson2: update description file
2009-06-10 21:37:19 +02:00
Alessandro Zummo
40e08cbb36
epson2: updated backend description and usb devices list
...
The backend description comes from the epkowa.desc file
with appropriate changes to suit epson2.desc. The usb
device list is now generated from this file, skipping
the :unsupported models. This means epson2 now detects
32 more models.
2009-06-03 01:08:40 +02:00
Pierre Willenbrock
056461a9fb
Description updates for genesys backend.
2009-05-29 21:59:11 +02:00
m. allan noah
9940f5c1f2
minor corrections
...
canon_dr: use correct title and description for resolution option
fujitsu: bump build number for previous commit
cardscan: correct usb pid
2009-05-25 22:37:15 -04:00
Nicolas Martin
32e30889af
Updated pixma backend documentation for Pixma MultiPass MP730.
...
Documentation update for Canon MultiPass MP730 support in:
- doc/descriptions/pixma.desc
- doc/sane-pixma.man
2009-05-23 11:55:28 +02:00
m. allan noah
327250b7dc
canon_dr v28, improve DR-2xxx support by emulating missing hw features
...
- use average instead of min/max for fine offset and gain
- rewrite supported resolution list as x and y arrays
- merge x and y resolution options into single option
- move scan params into two new structs, s->u and s->s
- sane_get_parameters() just returns values from s->u
- dont call wait_scanner() in object_position()
- dont call ssm_*() from option handler
- refactor sane_start()
- read_from_buffer() can workaround missing res, modes and cropping
- set most DR-2xxx machines to use the read_from_buffer workarounds
- set default threshold to 90
- add option for button #3 of some machines
- don't eject paper during init
- add DR-2010 quirks
- switch counter to HARD_SELECT, not SOFT
2009-05-22 10:24:58 -04:00
Pierre Willenbrock
3b13986395
Add Syscan 485, DCT 487; update descriptions for Syscan
...
Thanks again to Jack McGill.
2009-05-20 00:31:32 +02:00
Pierre Willenbrock
34717f1db0
Add Pentax DSmobile 600
...
Thanks go to Jack McGill for providing the model specific settings.
2009-05-19 16:24:59 +02:00
Nicolas Martin
a7f537ba7b
Fixed Pixma MP600 and MP600R for 2400 dpi scan, updated their descriptions.
2009-05-09 15:27:28 +02:00
Pilotfun
54d4b69abb
Updated pixma backend descriptions for ImageClass MF4010 and MF4018.
2009-05-06 21:35:08 +02:00
Ilia Sotnikov
92076edd36
* HP5590:
...
- Updated the list of supported devices (HP 5500C which is similar to
4570C, 5500C which is similar to 4500C) - only strings/comments, no
code was changed
- Updated backend version
- Updated man page
2009-05-06 20:37:48 +03:00
Ilia Sotnikov
0f25a1dbb5
* HP5590:
...
- Updated backend version
- Added HP ScanJet 4500C as completely supported
- Added HP ScanJet 5500C as untested
- HP ScanJet 4570C/5550C/5590/7650 marked as completely supported
2009-05-06 20:30:09 +03:00
Ilia Sotnikov
7facf41b6a
* HP ScanJet 4500C/4570C/5500C is supported by the 'hp5590' backend
2009-05-06 20:27:15 +03:00
Julien BLACHE
354b9a583f
Update documentation to reflect the switch from CVS to git
...
Basically s/CVS/git/ for now, more changes in the future?
2009-05-05 10:53:47 +02:00
Julien BLACHE
6e4ed52293
Add basic .gitignore files
2009-05-04 14:45:17 +02:00
m. allan noah
260b8ddf58
whitespace change to test updated html page creation
2009-05-04 03:07:59 +00:00
m. allan noah
64e498b330
* ChangeLog-1.0.20, Makefile.in: ChangeLog from 1.0.20 release
...
* configure, configure.in: version 1.0.21cvs
* doc/releases.txt: minor updates for new build system
* doc/descriptions/canon_dr.desc, doc/descriptions/coolscan3.desc,
doc/descriptions/rts8891.desc, doc/descriptions/xerox_mfp.desc:
remove :new tag
2009-05-04 02:43:30 +00:00
m. allan noah
7bcc5a9060
minor updates to html generation instructions
2009-05-04 00:22:21 +00:00
Chris Bagwell
6b5973313c
* Makefile.in, aclocal.m4, configure, */Makefile.in: Regenerated
...
with newer automake.
* backend/Makefile.am, tools/sane-config.in: Add missing
$GPHOTO2_LDFLAGS so library can be found.
* tools/Makefile.am: Add mising $SCSI_LIBS to sane-find-scanner.
2009-05-03 22:01:23 +00:00
m. allan noah
2f0914b9bf
* config.guess, config.sub: updated to latest versions
...
* NEWS, configure.in, configure: updated for 1.0.20
* sane-backends.lsm, doc/releases.txt: minor tweaks
* doc/descriptions/coolscan3.desc, doc/descriptions/rts8891.desc:
add :new marker, correct manpage link
2009-05-03 17:09:25 +00:00
Stéphane Voltz
7c88e57144
- doc updates and cleanups
2009-04-29 04:40:58 +00:00
Gerhard Jaeger
d2d4420a6b
* backend/plustek-usbdevs.c:
...
Tweaked highspeed settings for Epson 1260
2009-04-27 18:36:46 +00:00
m. allan noah
5605298bb7
* doc/descriptions/fujitsu.desc: update S1500 status to complete
2009-04-24 00:56:14 +00:00
Nicolas Martin
652da9a378
Updated documentation for Pixma MP240, reported to work fine by Nik.
2009-04-21 08:22:20 +00:00
m. allan noah
aafe1ac093
* backend/fujitsu.c, backend/fujitsu.conf.in,
...
doc/descriptions/fujitsu.desc: add S1500 usb ids and status
* backend/canon_dr.c: update credits
* doc/sane-fujitsu.man doc/sane-canon_dr.man: update version numbers,
dates, credits and known issues
* doc/saned.man: remove section about uncontrolled data port range
2009-04-21 01:18:04 +00:00
Nicolas Martin
17ce97ac80
Updated documentation for Pixma MP540, reported to work fine by Rogge.
2009-04-17 19:39:37 +00:00
m. allan noah
3654ff9d43
* backend/fujitsu.c, doc/descriptions/fujitsu.desc: backend v93
...
- return cmd status for reads of sensor options
* backend/canon_dr.c, doc/descriptions/canon_dr.desc: backend v26
- return cmd status for reads of sensor options
- allow rs to adjust read length for all bad status responses
2009-04-15 13:13:35 +00:00
m. allan noah
9c647bcfe3
* doc/doxygen-sanei.conf.in: update to recent version of doxygen
2009-04-12 20:26:47 +00:00
m. allan noah
0342a63033
Updates to prepare for 1.0.20 release:
...
* configure.in: change version to 1.0.20cvs
* configure: rebuild from configure.in
* include/sane/sane.h: hide API changes (minor, frame and status)
* backend/canon_dr.c, backend/fujitsu.c: SANE_FRAME_JPEG
* backend/coolscan3.c: SANE_FRAME_RGBI
* backend/genesys_gl646.c, backend/genesys_gl841.c: STATUS_HW_LOCKED
* backend/rts8891.c, frontend/scanimage.c: STATUS_WARMING_UP
* backend/pixma_io_sanei.c, backend/xerox_mfp.c,
backend/sane_strstatus.c: STATUS_HW_LOCKED & STATUS_WARMING_UP
* doc/releases.txt: minor updates for new build system
2009-04-12 19:40:31 +00:00
Nicolas Martin
d8b60f0e0d
Updated documentation for i-SENSYS MF4018 support.
2009-04-07 19:59:06 +00:00
Julien BLACHE
605a19c37b
Update for iscan 2.19.0
2009-04-07 08:55:45 +00:00
Nicolas Martin
89cda70783
Added MAC OS X usb interrupt read wrapper for darwin libusb, updated doc
2009-04-05 19:49:41 +00:00
m. allan noah
d1f48b2ce4
* backend/canon_dr.[ch], backend/canon_dr.conf.in: backend v24
...
- fix DR-2510C duplex deinterlacing code
- rewrite sane_read helpers to read until EOF
- update sane_start for scanners that dont use object_position
- dont call sanei_usb_clear_halt() if device is not open
- increase default buffer size to 4 megs
- set buffermode on by default
- hide modes and resolutions that DR-2510C lies about
- read_panel() logs front-end access to sensors instead of timing
- rewrite do_usb_cmd() to use remainder from RS info
* doc/desciptions/canon_dr.desc: backend v24, update DR-2510C comment
2009-04-05 04:46:38 +00:00
m. allan noah
b7cf1be3c2
oops- erased two models' status lines...
2009-03-30 21:12:20 +00:00
m. allan noah
a4561362b0
* backend/canon_dr.[ch], backend/canon_dr-cmd.h: backend v23
...
- rewrite all image data processing code
- handle more image interlacing formats
- re-enable binary mode on some scanners
- limit some machines to full-width scanning
* doc/desciptions/canon_dr.desc: v23, improved comments
2009-03-28 01:04:02 +00:00
m. allan noah
93b880cbd1
* backend/canon_dr.[ch], backend/canon_dr-cmd.h: backend v21
...
- correct rgb padding macro
- skip send_panel and ssm_df commands for DR-20xx scanners
* doc/desciptions/microtek2.desc: add ScanMaker 6400XL
2009-03-24 13:38:32 +00:00
Chris Bagwell
fae74d19a5
Don't include descriptions-external/template.desc. into generated HTML.
2009-03-24 13:36:26 +00:00
Chris Bagwell
f87c4aa108
Don't include doc/descriptions/template.desc. into auto-generated
...
HTML files.
2009-03-24 13:30:12 +00:00
m. allan noah
dc278c2e9f
* backend/canon_dr.[ch]: backend v19
...
- pad gray deinterlacing area for DR-2510C
- override tl_x and br_x for fixed width scanners
* doc/descriptions/canon_dr.desc: backend v19, update comments
2009-03-23 01:04:31 +00:00