Stéphane Voltz
85a448be1f
fix genesys man and desc
...
- no LiDE 120 support
2015-09-09 21:25:47 +02:00
Stéphane Voltz
128c8931b3
add putative support for LiDE 120
2015-03-17 22:23:21 +01:00
Stéphane Voltz
24ab521a1d
mark LiDE 120 as unsupported
2015-03-04 06:36:06 +01:00
Stéphane Voltz
470594e18b
initial support for LiDE 220
2015-02-26 22:26:00 +01:00
Stéphane Voltz
1b5e36a0ec
update status of the HP4850
2014-01-21 07:01:15 +01:00
Stéphane Voltz
6e1ce492ba
GL841 shading calibration fixes
...
- fix regression in LiDE 35 shading (buffer full flag)
- tune LiDE80 shading calibration by skipping extra dark area
- whitespaces cleanup
2013-12-16 06:06:19 +01:00
Stéphane Voltz
a7e664478e
update HP2400 and LiDE 80 description
2013-10-19 21:24:34 +02:00
Stéphane Voltz
8d1f440c27
chnage G2410 status to at basic
2013-02-27 21:28:09 +01:00
Stéphane Voltz
a5a6543cd0
support for 5th LiDE 210 button
2013-01-31 06:12:09 +01:00
Stéphane Voltz
aa160f50f6
initial Canonscan 4400F work
...
- add 4400F to devices
- add settings for 100 dpi scan
2012-10-24 21:21:13 +02:00
Stéphane Voltz
72b7da9600
update Xerox OneTouch 2400 status to complete
2012-05-31 21:14:23 +02:00
Stéphane Voltz
3d9b16327c
changelog entry for genesys backend build 81
2012-05-29 16:13:25 +02:00
Stéphane Voltz
3261ea7dc1
doc and changelog update for LiDE 700F support update
2012-05-28 08:24:12 +02:00
Stéphane Voltz
d0931a27c8
update HP N6310 description
2011-11-20 08:05:39 +01:00
Stéphane Voltz
c84445039d
add HP 4850c as an untested gl843 device
2011-11-19 09:50:44 +01:00
Stéphane Voltz
fb59aea859
Changelog and doc changes for genesys backend update
2011-10-21 07:58:31 +02:00
Stéphane Voltz
0dfac9a8a9
doc update for LiDE 200 4800 dpi mode
2011-07-06 21:50:35 +02:00
Stéphane Voltz
245db82a37
HP2400 support from Alexey Osipov <simba@lerlan.ru>
...
- applied and tweaked a patch from Alexey Osipov to complete
HP2400 support
2011-06-13 21:52:05 +02:00
Stéphane Voltz
3c4424ba3a
genesys backend update
2011-06-09 22:11:02 +02:00
Stéphane Voltz
d5850b4991
add DSmobile variant
2011-01-17 21:31:03 +01:00
Stéphane Voltz
3674a7d4ef
description update for LiDE 110/210
2011-01-13 22:29:41 +01:00
Stéphane Voltz
a30e72a68c
descriptions and man page updates for OpticBokk 3600
2010-12-27 07:08:44 +01:00
Stéphane Voltz
35385e5725
genesys backend update
...
- enable 16 bit gamma for GL124 scanners
- genesys doc credits and models update
2010-12-26 12:08:01 +01:00
Stéphane Voltz
406ecd0cda
genesys desc update
2010-12-24 08:51:44 +01:00
Stéphane Voltz
98c5d9454f
LiDE 210 tuning
...
- dynamic lineart not enabled by default
2010-12-16 22:10:37 +01:00
Stéphane Voltz
35f133c59b
add an device entry for LiDE 210
2010-12-15 06:24:55 +01:00
Stéphane Voltz
3d89a6f880
add new gl124 asic
...
create a place holder for low level commands
move low level functions to genesys_low.c
GL124 progresses
enable genesys_low debug and add DAC for LiDE 110
gl124 WIP
- gl847 cleanups
- genesys_low refactor
- gl124 starting version
GL124 WIP
- read scancnt/fedcnt,valid words coded
- memory layout coded
LiDE110 WIP
GL 124 WIP
- definition and use of get/set double/triple
- define register names
all mods done, ready to test
set fe OK
GL124 WIP : ready to test scans
GL124 WIP
GL124 WIP
- fixed analog fe issue: don't put afe regs in global set
GL124 : first light at 300 dpi
GL124 WIP
- 300 and 600 uncalibrated mostly ok (x coordinate rounding)
- 150 and 75 OK x-wise, y to be solved
solved rounding errors for gl124
re-add 400, 200 and 100 dpi modes
GL124 : tous x dpi OK
before adding line cropping
GL124 : line cropping almost finished
GL124 WIP : working line deletion
compute step rework
GL124 WIP : high speed table for dpi <= 300
move to scan area working
line skipping fix
new slope table for 600 dpi base
geometry and movement tuned
GL124 WIP : shading calibration almost working
working 600 dpi shading
GL124 : working shading calibration for all modes but 1200 dpi
working 1200 dpi shading
beta 1 of GL124 support
last tuning
update genesys.desc for LiDE 110
motor slope and start area tuning
shading coefficient computing clean up
add support for GL124 based CanoScan LiDE 110
feed almost OK up to 300 dpi
feeding is fixed
all issues fixed
2010-12-14 18:23:23 +01:00
Stéphane Voltz
7490f08ee4
update G4010/G4050 status
2010-10-13 06:49:03 +02:00
Stéphane Voltz
a8eaac4a8d
update HP3690 status to supported
2010-09-13 06:19:47 +02:00
Stéphane Voltz
03adcd25df
genesys build 32 update
2010-09-04 07:31:13 +02:00
Stéphane Voltz
889a3585ee
support for Panasonic KV-SS080
2010-08-31 22:13:42 +02:00
Stéphane Voltz
d97638a107
Canon LiDE 200 support up to 1200 DPI
2010-06-15 21:12:32 +02:00
Stéphane Voltz
a36121c1c3
changelog and doc update for genesys backend
2010-06-03 20:57:06 +02:00
Pierre Willenbrock
ff187e38f3
Change status of CanoScan LiDE 40 from untested to good
2010-05-03 22:17:31 +02:00
Stéphane Voltz
faaf808845
changelog and desc entry for genesys backend update
2010-03-15 06:39:37 +01:00
Stéphane Voltz
d7de4ed29f
genesys desc updates
2010-03-04 06:41:01 +01:00
Stéphane Voltz
150f001b0a
hp3670 support tuning
2010-02-12 14:43:59 +01:00
Stéphane Voltz
49450cffdc
added G2410
2010-02-10 21:26:23 +01:00
Stéphane Voltz
a58975deef
entry fro Xero Travel Scanner 100
2010-01-30 14:20:21 +01:00
Stéphane Voltz
9040d069b2
type fix
2010-01-19 21:39:29 +01:00
Stéphane Voltz
1f380dc805
add visioneer OneTouch 7100
2010-01-19 21:39:29 +01:00
Stéphane Voltz
ef4c5102ca
add support for Ambir/Syscan DS685
2009-12-05 07:26:25 +01:00
Stéphane Voltz
844c1da642
calibration and configuration fix
...
- fixed genesys.conf for 2 missing models
- updated desc file
- definitive fix for shhetfed calibration
2009-11-16 21:30:09 +01:00
Stéphane Voltz
38359727fd
genesys documentation update
2009-11-06 21:24:41 +01:00
Pierre Willenbrock
056461a9fb
Description updates for genesys backend.
2009-05-29 21:59:11 +02:00
Pierre Willenbrock
3b13986395
Add Syscan 485, DCT 487; update descriptions for Syscan
...
Thanks again to Jack McGill.
2009-05-20 00:31:32 +02:00
Pierre Willenbrock
34717f1db0
Add Pentax DSmobile 600
...
Thanks go to Jack McGill for providing the model specific settings.
2009-05-19 16:24:59 +02:00
Pierre Willenbrock
d167519e76
Remove "init device" usb request, add some support for Visioneer Strobe XP300.
...
Add support for uncalibrated scans in all modes for Visioneer Strobe XP300.
Front- and backside are side-by-side, backside mirrored horizontally.
2009-02-08 18:59:59 +00:00
Stéphane Voltz
c3475650ca
- added the rts8891 man page to the doc/ makefile
...
- added the Visioneer XP200 to the genesys desc file
2009-01-22 05:13:00 +00:00
Henning Geinitz
7baf54b170
Added USB vendor and product ids. Minor cleanups.
2006-01-08 22:01:51 +00:00