backend/fujitsu.[ch], backend/fujitsu-scsi.h: backend v79
- add usb ids for several models
- print additional hardware capability bits
- detect front-side endorser
- disable endorser-side controls if only one side installed
- add quirks for fi-6x70
* backend/epjitsu.[ch], backend/epjitsu-cmd.h: backend v 13, 14 and 15:
- add working page-height control
- add working brightness, contrast and threshold controls
- add disabled threshold curve and geometry controls
- move initialization code to sane_get_devices, for hotplugging
- support S300 on USB power
- support S300 225x200 and 600x600 scans
- support for automatic paper length detection (parm.lines = -1)
- expose hardware buttons/sensors as options for S300
* doc/descriptions/epjitsu.desc: change S300 status to good
- add independent maximum area values for flatbed
- override said values for fi-4220C, fi-4220C2 and fi-5220C
* doc/descriptions/fujitsu.desc: bump version, add 2 untested scanners
- add fi-6130 usb ID
- correct overscan dimension calculation
- provide correct overscan size overrides for fi-5110C and fi-4x20C2
- fi-5750C can't handle 10 bit LUT via USB
- add halftone type and pattern options
- support M3097G with IPC and CMP options via modified VPD response
* doc/descriptions/fujitsu.desc, doc/sane-fujitsu.man: backend v68,
- manpage cleanup
use model and serial to build sane.name (idea from Ryan Duryea),
allow both serial_name and device_name to sane_open scanner,
simulate missing VPD data for M3097G, probe scanner for color
interlacing mode instead of hardcoding, other minor cleanups
doc/descriptions/hp3900.desc, doc/descriptions/hp5590.desc,
doc/descriptions/hpljm1005.desc, doc/descriptions/hs2p.desc:
remove 'new' tag from sane 1.0.19 backends
* doc/descriptions/fujitsu.desc, backend/fujitsu.conf.in:
add fi-5530C2 usb ID
* backend/cardscan.c: correct version number
* backend/epjitsu.conf.in: improved firmware directions
* backend/fujitsu.[ch]: update to backend v 1.0.61
- page code 32 is not color interlacing, rename to 'unknown'
- increase number of bytes in response buffer of init_ms()
- protect debug modification code in init_ms() if NDEBUG is set
- proper async sane_cancel support
- re-enable JPEG support
- replace s->img_count with s->side
- sane_get_parameters(): dont round up larger than current paper size
- sane_start() rewritten, shorter, more clear
- return values are SANE_Status, not int
- hide unused functions
- added: Pixma MP210, MP470, MP520, MP610
- added: MultiPASS MP710
- declared untested: MP140, MP220, MultiPASS MP740
- declared experimental and untested: MP970
Bugs and fixes
- multipage documents scan no more fails with non-ADF MPs
- IO Fail bug when scanning large pages e.g. with Xsane
- implement send_time message form MP710, MP730 family
- run indent -gnu on all pixma_* source files.
m. allan noah