b39c12dd7b
Define MM_PER_INCH once for all
2009-06-18 15:54:49 +02:00
34717f1db0
Add Pentax DSmobile 600
...
Thanks go to Jack McGill for providing the model specific settings.
2009-05-19 16:24:59 +02:00
ad1f7de9e0
Always do shading calibration in color mode on gl841.
...
This removes the need to calibrate for both greyscale and color mode.
2009-04-17 13:03:35 +00:00
ce2fdfbfbe
Add calibration cache
...
The calibration data is stored in the directory $HOME/.sane
2009-03-25 12:57:24 +00:00
f261d52e11
Remove park_head
...
It is redirected to slow_back_home in all cases
2009-03-21 14:28:57 +00:00
c53a50cbfb
Add support for Visioneer Roadwarrior
2009-02-28 18:03:44 +00:00
c8ce0f00ef
Add support for Ambir/Syscan DocketPORT 665
2009-02-28 18:01:50 +00:00
ea76aef8a2
- rewrite of gl646 internals to enable easy addition of new models
...
- rewrite of calibration process to make it more robust and accurate
- untested full support for hp3670
- untested support for 50, 100 and 300 uncalibrated scans for hp2400
- use of id for device parts descriptions instead of using fixed
place in tables
- SCAN_MODE_* defines to clean up code
2009-02-27 12:37:16 +00:00
70f3fdfba4
* acinclude.m4, backend/*.[ch], tools/*.[ch], frontend/*.[ch]:
...
Global replace of u_int??_t with C9x standard based uintxx_t
in order to remove some tricky and overlapping portability logic
from acinclude.m4 and leave it in only m4/stdint.m4.
2009-02-26 03:15:43 +00:00
271e9cf317
Add post_scan and eject_feed to struct Genesys_Model
2009-02-23 14:12:20 +00:00
d167519e76
Remove "init device" usb request, add some support for Visioneer Strobe XP300.
...
Add support for uncalibrated scans in all modes for Visioneer Strobe XP300.
Front- and backside are side-by-side, backside mirrored horizontally.
2009-02-08 18:59:59 +00:00
81953325e8
- add support for uncalibrated scan for Visioneer Strobe XP200
...
- button support for MD5345, HP2300 and XP200
2009-01-19 05:46:43 +00:00
acc563e707
Make half-ccd mode optional
2009-01-18 14:20:55 +00:00
d881871d21
Fix prototype of update_hardware_sensors
2009-01-18 13:56:57 +00:00
ba164358db
Add support for buttons on Canon LiDE 35/40/50.
2009-01-16 15:31:10 +00:00
79fbd0c2f1
- added OPT_CUSTOM_GAMMA and OPT_GAMMA_VECTOR* options for GL646
...
- fixed allocation bugs detected by valgrind
- fixed bugs detected by 'tstbackend -r 1 -l 1'
- allow 'genesys' as default value for backend opening
- made OPT_COLOR_FILTER effectively work for GL646 scanners
- split sane_control_options() to make it more readable
2008-04-05 09:21:56 +00:00
f183b6fe00
* backend/genesys.c, backend/genesys_gl646.c,
...
backend/genesys_gl841.c, backend/genesys_low.h: Add LED exposure
control to gl841_set_lamp_power
2008-02-21 15:49:18 +00:00
8d2069c0dd
* backend/genesys.c, backend/genesys_devices.c, backend/genesys_low.h,
...
backend/genesys_gl646.c, backend/genesys_gl841.c: add infrastructure for
multiple motor power modes
2007-11-22 14:05:13 +00:00
bb2263e81b
* backend/genesys.c, backend/genesys_gl646.c,
...
backend/genesys_gl841.c, backend/genesys_low.h: change
bulk_write_register to take number of registers instead of
byte size of register set
2007-11-11 21:50:00 +00:00
c0ee8a2143
- mail address update
...
- minor man update
2007-08-27 04:58:53 +00:00
b53cfc23fe
* backend/genesys.c backend/genesys.h backend/genesys_low.h: added
...
options for enabling/disabling horizontal interpolation at high
resolutions and selection of color filter in grayscale and
lineart modes.
* backend/genesys_gl841.c: implemented color filter selection.
2006-06-07 22:39:09 +00:00
6b7031ca40
* backend/genesys.c backend/genesys.h backend/genesys_low.h
...
backend/genesys_conv.c backend/genesys_gl841.c: Added extended
option "Threshold" for lineart mode(Thanks to Laurent Charpentier).
2006-03-27 14:41:30 +00:00
9fbc4ad57f
* backend/genesys.c backend/genesys_low.h: Removed little endian conversions
...
in slope table creation functions
* backend/genesys_gl646.c backend/genesys_gl841.c: Added little endian
conversions to gl*_send_slope_table functions
2006-03-09 19:58:19 +00:00
02b1a07b5d
* Added support for Canon LiDE 35/40/50
...
* Reworked data conversion process to convert CIS data
2005-11-19 22:51:01 +00:00
bce76371c4
- added genesys backend from experimental area
2005-06-27 20:07:45 +00:00
Alessandro Zummo