Updated concerning USB scanners.

Henning Meier-Geinitz <henning@meier-geinitz.de>

README.openbsd

@@ -17,19 +17,25 @@ appropriately.
 USB-scanners:
 -------------
 USB-Scanners are supported in principle since OpenBSD 2.9. The USB scanner
-driver "uscanner" and access over libusb is supported. To get your scanner
+driver "uscanner" and access over libusb is supported.
-detected by the uscanner driver, it may be necessary to add it's vendor and
+
-device ids to the kernel and recompile (sys/devs/usb/uscanner.c). With OpenBSD
+To get your scanner detected by the uscanner driver, it may be necessary to
-3.0 there is also a bug concerning uscanner that prevents accessing the
+add its vendor and device ids to the kernel and recompile
-/dev/uscanner devices.  Get a newer kernel in this case. If your MAKEDEV won't
+(sys/devs/usb/uscanner.c). With OpenBSD 3.0 there is also a bug concerning
-make /dev/uscanner0 do it manually: "mknod /dev/uscanner0 c 77 0" for the
+uscanner that prevents accessing the /dev/uscanner devices.  Get a newer
-first scanner. Edit your backend's configuration file appropriately.
+kernel in this case. If your MAKEDEV won't make /dev/uscanner0 do it manually:
-If you want to use libusb, your scanner should *not* be claimed by the uscanner
+"mknod /dev/uscanner0 c 77 0" for the first scanner. Edit your backend's
-driver.
+configuration file appropriately.
+
+If you want to use libusb, your scanner should *not* be claimed by the
+uscanner driver. Also make sure that the ugen driver is NOT compiled with
+DIAGNOSTIC. If it is, you will get errors like "ugenioctl: USB_SET_TIMEOUT,
+no pipe". Make sure, that /dev/ugen* and /dev/usb* devices are available. Use
+/dev/MAKEDEV to create them, if necessary.
 
 Parport-scanners:
 -----------------
 I don't have any information about these. Please contact me or the SANE mailing
 list if you succeded in using one of these.
 
-2002-07-03 Henning Meier-Geinitz <henning@meier-geinitz.de>
+2002-07-14 Henning Meier-Geinitz <henning@meier-geinitz.de>