mirror
/
sane-project-backends
kopia lustrzana https://gitlab.com/sane-project/backends
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

KV-SS080: use same timings for all resolution

merge-requests/1/head
Stphane Voltz 2010-10-31 08:12:51 +01:00
rodzic 5aa3d2090d
commit e445099657
1 zmienionych plików z 4 dodań i 20 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

24
backend/genesys_gl843.c
Wyświetl plik

@ -597,22 +597,6 @@ gl843_setup_sensor (Genesys_Device * dev, Genesys_Register_Set * regs, int dpi)
/* TODO we need to create another data struct
* for CKxMAP and CKSEL */
/* use x1 cksel when at higher resolutions */
/* KV-SS080 sensor */
if (dev->model->ccd_type == CCD_KVSS080)
{
if(dpi>dev->sensor.optical_res/2)
{
r = sanei_genesys_get_address (regs, 0x18);
r->value &= ~REG18_CKSEL;
sanei_genesys_write_register (dev, 0x78, 0x03);
}
else
{
sanei_genesys_write_register (dev, 0x78, 0x07);
}
}
/* G4050/G4010 sensor */
if (dev->model->ccd_type == CCD_G4050)
{
@ -3713,7 +3697,7 @@ gl843_cold_boot (Genesys_Device * dev)
/* URB 14 control 0x40 0x0c 0x8c 0x10 len 1 wrote 0xb4 */
RIE (write_end_access (dev, 0x10, 0xb4));
/* set up clock once for all TODO use sensor type for these sensor realted registers */
/* set up clock once for all TODO use sensor type for these sensor related registers */
if (strncmp (dev->model->name, "hewlett-packard-scanjet-g40", 27) == 0)
{
/* CK1MAP */
@ -3732,9 +3716,9 @@ gl843_cold_boot (Genesys_Device * dev)
RIE (sanei_genesys_write_register (dev, 0x75, 0x00));
RIE (sanei_genesys_write_register (dev, 0x76, 0x00));
/* CK3MAP */
RIE (sanei_genesys_write_register (dev, 0x77, 0x00));
RIE (sanei_genesys_write_register (dev, 0x78, 0x07));
RIE (sanei_genesys_write_register (dev, 0x79, 0xfe));
RIE (sanei_genesys_write_register (dev, 0x77, 0x03));
RIE (sanei_genesys_write_register (dev, 0x78, 0xff));
RIE (sanei_genesys_write_register (dev, 0x79, 0xff));
}
/* CK4MAP */
RIE (sanei_genesys_write_register (dev, 0x7a, 0x03));