diff --git a/ChangeLog b/ChangeLog
index 6431c7b00..38af0cdf6 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -4,6 +4,8 @@
 	  some time, most email addresses bounce, no response to
 	  pings. Changed contact address to the only one that doesn't
 	  directly bounce.
+	* backend/artec_eplus48u.conf: Added support for UMAX AstraSlim
+	  1200 SE (from Harq al-Ada <nadaban.bogdan at gmail.com>).
 
 2005-10-15  Jochen Eisinger <jochen@penguin-breeder.org>
 
diff --git a/backend/artec_eplus48u.conf b/backend/artec_eplus48u.conf
index 1dc706f96..18a55678d 100644
--- a/backend/artec_eplus48u.conf
+++ b/backend/artec_eplus48u.conf
@@ -297,3 +297,62 @@ option modelString "E+ Pro"
 
 #If you are using the scanner module (kernel driver), a device looks like this:
 #device /dev/usbscanner
+
+# Another USB section:
+# each device needs at least the following line:
+# usb vendor-ID and product-ID
+# Every device configuration in this file must begin with an usb entry.
+# This section is for the UMAX AstraSlim 1200 SE
+# Note, that the name of the firmware file is called 1200.usb for
+# this device
+
+usb 0x05d8 0x4010
+
+#
+# Path to the firmware file
+# This file comes with the Windows driver
+# The scanner won't work without it
+#
+
+option artecFirmwareFile <path>/1200.usb
+
+#
+# for adjusting the default gamma values
+#
+
+option redGamma         1.0
+option greenGamma       1.0
+option blueGamma        1.0
+option masterGamma      1.9
+
+#Use this options to set the default offset and exposure time values.
+#If calibrate device is set to 0, this values are used instead of the values
+#which were calculated during calibration.
+
+option redOffset        0x28
+option greenOffset      0x2f
+option blueOffset       0x2f
+option redExposure      0xa7
+option greenExposure    0x116
+option blueExposure     0xdc
+
+# The vendor and model string
+# This string is displayed by the frontends. The Umax AstraSlim 1200 SE
+# has a different product id, therefore we can overwrite the vendor and model
+# string here.
+
+option vendorString "UMAX"
+option modelString "AstraSlim 1200 SE"
+
+#
+# device-name
+#
+# If autodetection does not work, then you can specify the device here
+# The device entry must be the last one in this config file (or the last one before a
+# new usb entry).
+
+#If you are using libusb, a device looks like this:
+#device libusb:001:002
+
+#If you are using the scanner module (kernel driver), a device looks like this:
+#device /dev/usbscanner