Minor syntax changes

backend/gphoto2.conf

@@ -1,24 +1,32 @@
 # Interface port where the camera is connected
-# This should be one of the values returned by "gphoto2 --list-ports", such
-# as serial:/dev/ttyS6 or usb:
+# This should be one of the values returned by "gphoto2 --list-ports", 
+# such # as serial:/dev/ttyS6 or usb:
 port=usb:
+
+# Port speed.  This should be one of the values returned by 
+# "gphoto2 --abilities"
+speed=115200
+
 # Name of camera.  This should be one of the values returned by 
 # "gphoto2 --list-cameras"
 camera=Kodak DC240
+
 # Prints some extra information during the init phase.  
-#dumpinquiry
-# I haven't figured out a way to get the resolution from the camera yet,
-# so we have to force it here.  If the camera supports multiple image 
-# sizes (other than high and low resolution),  you're out of luck.  
+dumpinquiry
+
+# The resolution should be the maximum resolution supported by the 
+# camera.  It's not really used for much, since the actual size will be
+# reported by the camera when the download starts.  But it may be useful
+# for the frontend to have a clue prior to the download.  (e.g. it 
+# may want to create an image window, or report the maximum file size.
 # Width x Height.
-high_resolution=1280x960
-low_resolution=640x480
+resolution=1280x960
+
+# Thumbnail resolutions - ditto
 thumb_resolution=160x120
+
 # top-level (fixed) folder directory in camera.  Backend assumes
 # that there is one variable directory under this (e.g. 100DC240)
 # which will be read from the camera, and all the images in the 
 # camera are under that. 
 topfolder=/PCCARD/DCIM
-# Path to gphoto2 executable.  Defaults to "gphoto2" if not specified
-# (which should be in your PATH)
-gphoto2path=/usr/local/bin/gphoto2