don't fail if sanei_scsi_open gives smaller buffer than asked for

minor doc updates

ChangeLog

@@ -2,6 +2,10 @@
 	* backend/canon_dr.c, backend/cardscan.c, backend/epjitsu.c,
 	  backend/fujitsu.c, backend/kodak.c, po/Makefile.*:
 	- enable translations of all static strings via SANE_I18N macro
+	- don't fail if sanei_scsi_open gives smaller buffer than asked for
+	* doc/descriptions/kodak.desc, doc/sane-canon_dr.man,
+	  doc/sane-fujitsu.man, doc/sane-kodak.man:
+	- minor version number and text updates
 
 2010-02-10 m. allan noah <kitno455 at gmail dot com>
 	* acinclude.m4, configure: missing $ in variable expansion

backend/canon_dr.c

@@ -253,6 +253,8 @@
          - reset some intermediate params between duplex sides
       v35 2010-02-09, MAN
          - cleanup #includes and copyright
+         - add SANE_I18N to static strings
+         - don't fail if scsi buffer is too small
 
    SANE FLOW DIAGRAM
 
@@ -816,7 +818,6 @@ connect_fd (struct scanner *s)
     if(!ret && buffer_size != s->buffer_size){
       DBG (5, "connect_fd: cannot get requested buffer size (%d/%d)\n",
         buffer_size, s->buffer_size);
-      ret = SANE_STATUS_NO_MEM;
     }
   }
 

backend/fujitsu.c

@@ -448,6 +448,8 @@
          - use sanei_magic to provide software deskew, autocrop and despeckle
       v98 2010-02-09, MAN
          - clean up #include lines and copyright
+         - add SANE_I18N to static strings
+         - don't fail if scsi buffer is too small
 
    SANE FLOW DIAGRAM
 
@@ -1039,10 +1041,11 @@ connect_fd (struct fujitsu *s)
   }
   else {
     DBG (15, "connect_fd: opening SCSI device\n");
-    ret = sanei_scsi_open_extended (s->device_name, &(s->fd), sense_handler, s, &s->buffer_size);
+    ret = sanei_scsi_open_extended (s->device_name, &(s->fd), sense_handler, s, 
-    if(ret == SANE_STATUS_GOOD && buffer_size != s->buffer_size){
+      &s->buffer_size);
-      DBG (5, "connect_fd: cannot get requested buffer size (%d/%d)\n", buffer_size, s->buffer_size);
+    if(!ret && buffer_size != s->buffer_size){
-      ret = SANE_STATUS_NO_MEM;
+      DBG (5, "connect_fd: cannot get requested buffer size (%d/%d)\n",
+        buffer_size, s->buffer_size);
     }
   }
 

backend/kodak.c

@@ -58,6 +58,9 @@
       v6 2009-06-22, MAN
          - improved set_window() to build desciptor from scratch
          - initial release
+      v7 2010-02-10, MAN
+         - add SANE_I18N to static strings
+         - don't fail if scsi buffer is too small
 
    SANE FLOW DIAGRAM
 
@@ -116,7 +119,7 @@
 #include "kodak.h"
 
 #define DEBUG 1
-#define BUILD 6 
+#define BUILD 7 
 
 /* values for SANE_DEBUG_KODAK env var:
  - errors           5
@@ -440,9 +443,9 @@ connect_fd (struct scanner *s)
   else {
     ret = sanei_scsi_open_extended (s->device_name, &(s->fd), sense_handler,
       s, &s->buffer_size);
-    if(ret == SANE_STATUS_GOOD && buffer_size != s->buffer_size){
+    if(!ret && buffer_size != s->buffer_size){
-      DBG (5, "connect_fd: cannot get requested buffer size (%d/%d)\n", buffer_size, s->buffer_size);
+      DBG (5, "connect_fd: cannot get requested buffer size (%d/%d)\n",
-      ret = SANE_STATUS_NO_MEM;
+        buffer_size, s->buffer_size);
     }
     else{
       DBG (15, "connect_fd: opened SCSI device\n");

doc/descriptions/kodak.desc

@@ -1,8 +1,8 @@
 :backend "kodak"
 :url "http://www.thebility.com/kodak/" 
-:version "6"
+:version "7"
 :manpage "sane-kodak"
-:comment "New backend for SANE release 1.0.21, see manpage"
+:comment "Backend update for SANE release 1.0.21, see sane-kodak manpage"
 :devicetype :scanner
 :new :yes
 

doc/sane-canon_dr.man

@@ -1,4 +1,4 @@
-.TH sane\-canon_dr 5 "09 Fev 2010" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
+.TH sane\-canon_dr 5 "10 Feb 2010" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
 .IX sane\-canon_dr
 
 .SH NAME
@@ -10,7 +10,7 @@ The
 library implements a SANE (Scanner Access Now Easy) backend which
 provides access to some Canon DR-series scanners.
 
-This document describes backend version 35, which shipped with SANE 1.0.21cvs.
+This document describes backend version 35, which shipped with SANE 1.0.21.
 
 .SH SUPPORTED HARDWARE
 This version has only been tested with a few scanner models. Please see 

doc/sane-fujitsu.man

@@ -1,4 +1,4 @@
-.TH sane\-fujitsu 5 "09 Feb 2010" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
+.TH sane\-fujitsu 5 "10 Feb 2010" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
 .IX sane\-fujitsu
 
 .SH NAME
@@ -10,7 +10,7 @@ The
 library implements a SANE (Scanner Access Now Easy) backend which
 provides access to most Fujitsu flatbed and ADF scanners.
 
-This document describes backend version 98, which shipped with SANE 1.0.21cvs.
+This document describes backend version 98, which shipped with SANE 1.0.21.
 
 .SH SUPPORTED HARDWARE
 This version supports every known model which speaks the Fujitsu SCSI and 

doc/sane-kodak.man

@@ -1,4 +1,4 @@
-.TH sane\-kodak 5 "22 Jun 2009" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
+.TH sane\-kodak 5 "10 Feb 2010" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
 .IX sane\-kodak
 
 .SH NAME
@@ -10,7 +10,7 @@ The
 library implements a SANE (Scanner Access Now Easy) backend which
 provides access to large Kodak flatbed and ADF scanners.
 
-This document describes backend version 6, which shipped with SANE 1.0.21cvs.
+This document describes backend version 7, which shipped with SANE 1.0.21.
 
 .SH SUPPORTED HARDWARE
 This version should support models which speak the Kodak SCSI and Firewire 
@@ -136,8 +136,7 @@ Kodak provided access to hardware, documentation and personnel.
   
 .SH "SEE ALSO"
 sane(7),
-sane\-scsi(5),
+sane\-scsi(5)
-sane\-avision(5)
 
 .SH AUTHOR
 m. allan noah: <kitno455 a t gmail d o t com>