genesys: Fix calibration size calculation for 8600F

The current approach of marking the scanner as
GENESYS_FLAG_FULL_HWDPI_MODE is counter-productive, because only the
register value is always full DPI, the actual resolution is different.
For now, let's just work around this by having a special case for the
scanner.

backend/genesys_gl843.cc

@@ -2999,7 +2999,7 @@ gl843_init_regs_for_shading (Genesys_Device * dev)
     dev->calib_lines = dev->model->shading_ta_lines;
   else
     dev->calib_lines = dev->model->shading_lines;
-  dpihw=sanei_genesys_compute_dpihw(dev,dev->settings.xres);
+  dpihw=sanei_genesys_compute_dpihw_calibration(dev,dev->settings.xres);
   factor=dev->sensor.optical_res/dpihw;
   resolution=dpihw;
 
@@ -3455,7 +3455,7 @@ gl843_offset_calibration (Genesys_Device * dev)
   bpp = 8;
 
   /* compute divider factor to compute final pixels number */
-  dpihw = sanei_genesys_compute_dpihw (dev, dev->settings.xres);
+  dpihw = sanei_genesys_compute_dpihw_calibration (dev, dev->settings.xres);
   factor = dev->sensor.optical_res / dpihw;
   resolution = dpihw;
 
@@ -3663,7 +3663,7 @@ gl843_coarse_gain_calibration (Genesys_Device * dev, int dpi)
   int bpp;
 
   DBG(DBG_proc, "%s: dpi = %d\n", __func__, dpi);
-  dpihw=sanei_genesys_compute_dpihw(dev, dpi);
+  dpihw=sanei_genesys_compute_dpihw_calibration(dev, dpi);
   factor=dev->sensor.optical_res/dpihw;
 
   /* coarse gain calibration is always done in color mode */
@@ -3848,7 +3848,8 @@ gl843_init_regs_for_warmup (Genesys_Device * dev,
   /* setup scan */
   *channels=3;
   resolution=600;
-  dpihw=sanei_genesys_compute_dpihw(dev, resolution);
+  dpihw=sanei_genesys_compute_dpihw_calibration(dev, resolution);
+  resolution=dpihw;
   factor=dev->sensor.optical_res/dpihw;
   num_pixels=dev->sensor.sensor_pixels/(factor*2);
   *total_size = num_pixels * 3 * 1;
@@ -4415,6 +4416,16 @@ gl843_send_shading_data (Genesys_Device * dev, uint8_t * data, int size)
       strpixel*=tgtime;
       endpixel*=tgtime;
 
+      if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F && dev->current_setup.half_ccd)
+        {
+          int optical_res = dev->sensor.optical_res / 4;
+          int dpiset_real = dpiset / 4;
+          int half_ccd_factor = optical_res /
+              sanei_genesys_compute_dpihw_calibration(dev, dpiset_real);
+          strpixel /= half_ccd_factor;
+          endpixel /= half_ccd_factor;
+        }
+
       /* 16 bit words, 2 words per color, 3 color channels */
       offset=(strpixel-startx)*2*2*3;
       length=(endpixel-strpixel)*2*2*3;

backend/genesys_low.cc

@@ -1787,6 +1787,29 @@ int sanei_genesys_compute_dpihw(Genesys_Device *dev, int xres)
   return dev->sensor.optical_res;
 }
 
+// sanei_genesys_compute_dpihw returns the dpihw that is written to register.
+// However the number of pixels depends on half_ccd mode
+int sanei_genesys_compute_dpihw_calibration(Genesys_Device *dev, int xres)
+{
+  if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F)
+    {
+      // real resolution is half of the "official" resolution - half_ccd mode
+      int hwres = dev->sensor.optical_res / 4;
+
+      if (xres <= hwres / 4)
+        {
+          return hwres / 4;
+        }
+      if (xres <= hwres / 2)
+        {
+          return hwres / 2;
+        }
+      return hwres;
+    }
+
+  return sanei_genesys_compute_dpihw(dev, xres);
+}
+
 /** @brief motor profile
  * search for the database of motor profiles and get the best one. Each
  * profile is at full step and at a reference exposure. Use first entry

backend/genesys_low.h

@@ -1267,6 +1267,9 @@ sanei_genesys_asic_init(Genesys_Device *dev, SANE_Bool cold);
 extern
 int sanei_genesys_compute_dpihw(Genesys_Device *dev, int xres);
 
+extern
+int sanei_genesys_compute_dpihw_calibration(Genesys_Device *dev, int xres);
+
 extern
 Motor_Profile *sanei_genesys_get_motor_profile(Motor_Profile *motors, int motor_type, int exposure);