genesys: Add support for segmented sensors on gl843

backend/genesys.cc

@@ -5178,7 +5178,7 @@ probe_genesys_devices (void)
    of Genesys_Calibration_Cache as is.
 */
 static const char* CALIBRATION_IDENT = "sane_genesys";
-static const int CALIBRATION_VERSION = 8;
+static const int CALIBRATION_VERSION = 9;
 
 bool read_calibration(std::istream& str, Genesys_Device::Calibration& calibration,
                       const std::string& path)

backend/genesys_gl843.cc

@@ -200,6 +200,8 @@ static void gl843_setup_sensor(Genesys_Device* dev, const Genesys_Sensor& sensor
     if (!(dev->model->flags & GENESYS_FLAG_FULL_HWDPI_MODE)) {
         regs->set8(0x7d, 0x90);
     }
+
+    dev->segment_order = sensor.segment_order;
 }
 
 
@@ -1299,6 +1301,9 @@ static void gl843_init_scan_regs(Genesys_Device* dev, const Genesys_Sensor& sens
     dev->out_buffer.clear();
     dev->out_buffer.alloc(session.buffer_size_out);
 
+    dev->oe_buffer.clear();
+    dev->oe_buffer.alloc(session.output_line_bytes_raw * 2);
+
   dev->read_bytes_left_after_deseg = session.output_line_bytes * session.output_line_count;
 
     DBG(DBG_info, "%s: physical bytes to read = %lu\n", __func__,

backend/genesys_low.cc

@@ -1322,6 +1322,8 @@ void compute_session(Genesys_Device* dev, ScanSession& s, const Genesys_Sensor&
     s.segment_count = 1;
     if (dev->model->flags & GENESYS_FLAG_SIS_SENSOR || dev->model->asic_type == AsicType::GL124) {
         s.segment_count = sensor_profile->get_segment_count();
+    } else {
+        s.segment_count = sensor.get_segment_count();
     }
 
     s.optical_pixels_raw = s.optical_pixels;
@@ -1363,8 +1365,14 @@ void compute_session(Genesys_Device* dev, ScanSession& s, const Genesys_Sensor&
         s.conseq_pixel_dist_bytes = s.output_line_bytes_raw / s.segment_count;
     }
 
+    if (dev->model->asic_type == AsicType::GL843) {
+        s.conseq_pixel_dist_bytes = s.output_line_bytes_raw / s.segment_count;
+    }
+
     s.output_segment_pixel_group_count = 0;
-    if (dev->model->asic_type == AsicType::GL124) {
+    if (dev->model->asic_type == AsicType::GL124 ||
+        dev->model->asic_type == AsicType::GL843)
+    {
         s.output_segment_pixel_group_count = s.output_line_bytes_raw / s.segment_count;
     }
     if (dev->model->asic_type == AsicType::GL845 ||

backend/genesys_sensor.h

@@ -303,6 +303,15 @@ struct Genesys_Sensor {
 
     int exposure_lperiod = -1;
 
+    // the number of pixels in a single segment.
+    // only on gl843
+    unsigned segment_size = 0;
+
+    // the order of the segments, if any, for the sensor. If the sensor is not segmented or uses
+    // only single segment, this array can be empty
+    // only on gl843
+    std::vector<unsigned> segment_order;
+
     GenesysRegisterSettingSet custom_base_regs; // gl646-specific
     GenesysRegisterSettingSet custom_regs;
     GenesysRegisterSettingSet custom_fe_regs;
@@ -341,6 +350,13 @@ struct Genesys_Sensor {
         return std::find(channels.begin(), channels.end(), count) != channels.end();
     }
 
+    unsigned get_segment_count() const
+    {
+        if (segment_order.size() < 2)
+            return 1;
+        return segment_order.size();
+    }
+
     bool operator==(const Genesys_Sensor& other) const
     {
         return sensor_id == other.sensor_id &&
@@ -356,6 +372,8 @@ struct Genesys_Sensor {
             gain_white_ref == other.gain_white_ref &&
             exposure == other.exposure &&
             exposure_lperiod == other.exposure_lperiod &&
+            segment_size == other.segment_size &&
+            segment_order == other.segment_order &&
             custom_base_regs == other.custom_base_regs &&
             custom_regs == other.custom_regs &&
             custom_fe_regs == other.custom_fe_regs &&
@@ -384,6 +402,10 @@ void serialize(Stream& str, Genesys_Sensor& x)
     serialize(str, x.exposure.red);
     serialize(str, x.exposure_lperiod);
     serialize_newline(str);
+    serialize(str, x.segment_size);
+    serialize_newline(str);
+    serialize(str, x.segment_order);
+    serialize_newline(str);
     serialize(str, x.custom_base_regs);
     serialize_newline(str);
     serialize(str, x.custom_regs);