Mustek Paragon 600 II EP works. Mentioned "parport0".

ChangeLog

@@ -6,6 +6,9 @@
 	  Mustek ScanExpress A3 USB. 
 	* doc/backend-writing.txt: Added some hints about number of
 	  files. 
+	* backend/mustek.conf doc/sane-mustek.man
+	  doc/descriptions/mustek.desc: Mustek Paragon 600 II EP
+	  works. Mentioned "parport0".
 
 2005-09-17  Mattias Ellert <mattias.ellert@tsl.uu.se>
 

backend/mustek.conf

@@ -36,5 +36,6 @@ scsi SCANNER
 # option linedistance-fix       # only neccessary with firmware 2.x
 
 #-------------------------- 600 II EP ---------------------------------------
-#0x378				
-				# 0x378=lpt1, 0x278=lpt2, 0x3bc=lpt3
+#parport0				
+				# parport0, parport1, ..., 
+				# or: 0x378(=lpt1), 0x278(=lpt2), 0x3bc(=lpt3)

doc/descriptions/mustek.desc

@@ -46,8 +46,8 @@
 
 :model "Paragon 600 II EP"
 :interface "Parport"
-:status :untested
-:comment "Not tested yet but should work. Please contact me if you own such a device."
+:status :minimal
+:comment "Works, however only low resolutions and quality in color mode is bad."
 
 :model "ScanMagic 600 II SP"
 :interface "SCSI"

doc/sane-mustek.man

@@ -1,4 +1,4 @@
-.TH sane-mustek 5 "25 Dec 2002" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
+.TH sane-mustek 5 "18 Sep 2005" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
 .IX sane-mustek
 .SH NAME
 sane-mustek \- SANE backend for Mustek SCSI flatbed scanners (and some other devices)
@@ -297,7 +297,7 @@ for the 600 II N are
 .IR 0x26b ", " 0x2ab ", " 0x2eb ", " 0x22b ", " 0x32b ", " 0x36b ", "
 .IR 0x3ab ", " 0x3eb .
 For the 600 II EP use one of these:
-.IR 0x378 ", " 0x278 ", " 0x3bc .
+.IR parport0 ", " parport1 ", " parport2 ", " 0x378 ", " 0x278 ", " 0x3bc .
 Pick one that doesn't conflict with the other hardware in your computer. Put
 only one number on a single line. Example:
 .PP