mirror
/
sane-project-backends
kopia lustrzana https://gitlab.com/sane-project/backends
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Various warning cleanups

merge-requests/1/head
Pierre Willenbrock 2009-02-23 14:21:23 +00:00
rodzic e026a4fa2c
commit a2d99b716a
2 zmienionych plików z 8 dodań i 11 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

2
ChangeLog
Wyświetl plik

@ -6,7 +6,7 @@
backend/genesys_gl841.c: Move sanei_genesys_{start,stop}_motor into
chip specific sources
backend/genesys_gl841.c: Make start/stop_(motor, now)action
actually work
actually work, various warning cleanups
2009-02-23 Jonathan Bravo Lopez <jkdsoft@gmail.com>
backend/hp3900_config.c: Fix area of negative/slide scans for

17
backend/genesys_gl841.c
Wyświetl plik

@ -3427,7 +3427,6 @@ gl841_eject_document (Genesys_Device * dev)
Genesys_Register_Set local_reg[GENESYS_GL841_MAX_REGS+1];
SANE_Status status;
u_int8_t val;
int i;
SANE_Bool paper_loaded;
unsigned int init_steps;
float feed_mm;
@ -3636,8 +3635,8 @@ gl841_detect_document_end (Genesys_Device * dev)
{
SANE_Status status = SANE_STATUS_GOOD;
SANE_Bool paper_loaded;
int bytes_to_flush, lines, sub_bytes;
u_int32_t flines, channels, depth, bytes_remain, sublines;
unsigned int flines, channels, depth, bytes_remain, sublines,
bytes_to_flush, lines, sub_bytes;
DBG (DBG_proc, "%s: begin\n", __FUNCTION__);
RIE (gl841_get_paper_sensor (dev, &paper_loaded));
@ -3752,8 +3751,6 @@ gl841_end_scan (Genesys_Device * dev, Genesys_Register_Set * reg,
SANE_Bool check_stop)
{
SANE_Status status;
int i = 0;
u_int8_t val;
DBG (DBG_proc, "gl841_end_scan (check_stop = %d)\n", check_stop);
@ -3773,7 +3770,7 @@ gl841_end_scan (Genesys_Device * dev, Genesys_Register_Set * reg,
}
}
DBG (DBG_proc, "gl841_end_scan: completed (i=%u)\n", i);
DBG (DBG_proc, "gl841_end_scan: completed\n");
return status;
}
@ -3785,8 +3782,7 @@ gl841_feed (Genesys_Device * dev, int steps)
Genesys_Register_Set local_reg[GENESYS_GL841_MAX_REGS+1];
SANE_Status status;
u_int8_t val;
int i;
int loop = 0;
int loop;
DBG (DBG_proc, "gl841_feed (steps = %d)\n",
steps);
@ -3834,6 +3830,7 @@ gl841_feed (Genesys_Device * dev, int steps)
return status;
}
loop = 0;
while (loop < 300) /* do not wait longer then 30 seconds */
{
status = sanei_genesys_get_status (dev, &val);
@ -3870,7 +3867,6 @@ gl841_slow_back_home (Genesys_Device * dev, SANE_Bool wait_until_home)
Genesys_Register_Set local_reg[GENESYS_GL841_MAX_REGS+1];
SANE_Status status;
u_int8_t val;
int i;
DBG (DBG_proc, "gl841_slow_back_home (wait_until_home = %d)\n",
wait_until_home);
@ -3991,7 +3987,7 @@ gl841_park_head (Genesys_Device * dev, Genesys_Register_Set * reg,
Genesys_Register_Set local_reg[GENESYS_GL841_MAX_REGS+1];
SANE_Status status;
u_int8_t val = 0;
int loop = 0;
int loop;
int i = 0;
DBG (DBG_proc, "gl841_park_head (wait_until_home = %d)\n",
@ -4057,6 +4053,7 @@ gl841_park_head (Genesys_Device * dev, Genesys_Register_Set * reg,
/* wait for head to park if needed */
if (wait_until_home)
{
loop = 0;
/* no more than 300 loops of 100 ms each -> 30 second time out */
while (loop < 300)
{