Added link to mostang.com mailing list page.

Henning Meier-Geinitz <henning@meier-geinitz.de>

doc/sane-abaton.man

@@ -16,7 +16,8 @@ works with this backend, or if you own an Abaton scanner that does not
 work with this backend, please contact
 .IR sane\-devel@mostang.com
 with the model number, so that arrangements can be made to include
-support for it.
+support for it. Have a look at http://www.mostang.com/sane/mail.html
+concerning subscription to sane-devel.
 .PP
 Abaton is out of business, and these scanners are not supported by
 Everex (the parent company of Abaton), nor is there any programming

doc/sane-agfafocus.man

@@ -32,6 +32,8 @@ If you own a scanner other than the ones listed above that works with
 this backend, please let us know by sending the scanner's model name,
 SCSI id, and firmware revision to
 .IR sane\-devel@mostang.com .
+Have a look at http://www.mostang.com/sane/mail.html
+concerning subscription to sane-devel.
 .PP
 All of these scanners are pre-SCSI-2, and do not even report properly
 to SCSI Inquiry.  This is typically evident in SCSI bus scans, where

doc/sane-apple.man

@@ -24,7 +24,7 @@ works with this backend, please let us know by sending the scanner's
 model name, SCSI id, and firmware revision to
 .IR sane\-devel@mostang.com .
 See http://www.mostang.com/sane/mail.html for details on how to subscribe to
-sane-devel.
+sane\-devel.
 
 .SH "DEVICE NAMES"
 This backend expects device names of the form:

doc/sane-bh.man

@@ -31,10 +31,11 @@ COPISCAN II 3338(A) Simplex Scanner (with ACE)
 If you have a Bell+Howell scanner and are able to test it with this
 backend, please contact
 .IR sane\-devel@mostang.com
-with the model number and testing results.  Additionally, the author is
-curious as to the likelihood of using this backend with the newer 
-4000 and 8000 series scanners.  If you have such a beast, please let
-me know.
+with the model number and testing results. Have a look at
+http://www.mostang.com/sane/mail.html concerning subscription to
+sane-devel. Additionally, the author is curious as to the likelihood of using
+this backend with the newer 4000 and 8000 series scanners.  If you have such a
+beast, please let me know.
 .PP
 The Bell+Howell Copiscan II series document scanners are high
 volume, high throughput scanners designed for document scanning 

doc/sane-microtek.man

@@ -190,4 +190,5 @@ setenv SANE_DEBUG_MICROTEK 128
 More general comments, suggestions, and inquiries about frontends
 or SANE should go to 
 .BR sane\-devel@mostang.com ,
-the SANE Developers mailing list.
+the SANE Developers mailing list. Have a look at
+http://www.mostang.com/sane/mail.html concerning subscription to sane-devel.

doc/sane-pint.man

@@ -22,6 +22,8 @@ If have successfully used the PINT driver with your scanner, but it
 does not work using this SANE backend, please let us know.  To do
 this, send a mail with the relevant information for your scanner to
 .IR sane\-devel@mostang.com .
+Have a look at http://www.mostang.com/sane/mail.html concerning subscription
+to sane-devel.
 
 .SH "DEVICE NAMES"
 This backend expects device names of the form:

doc/sane-st400.man

@@ -23,6 +23,8 @@ and ST600.  If you own one of these scanners, or a scanner other than the
 ones listed above that works with this backend, please let us know by sending
 the scanner's model name, SCSI ID, and firmware revision to
 .IR sane\-devel@mostang.com .
+Have a look at http://www.mostang.com/sane/mail.html concerning subscription
+to sane-devel.
 
 .SH "DEVICE NAMES"
 This backend expects device names of the form: