genesys: Added transparency button option

This is introduced primarily for the ScanJet G4010 which has "Scan Film"
buttons.

(cherry picked from commit 8347191b5f)

backend/genesys/genesys.cpp

@@ -5003,6 +5003,18 @@ static void init_options(Genesys_Scanner* s)
   else
     s->opt[OPT_EXTRA_SW].cap = SANE_CAP_INACTIVE;
 
+    // transparency/scan_film button
+    s->opt[OPT_TRANSP_SW].name = "transparency";
+    s->opt[OPT_TRANSP_SW].title = SANE_I18N ("Transparency button");
+    s->opt[OPT_TRANSP_SW].desc = SANE_I18N ("Transparency button");
+    s->opt[OPT_TRANSP_SW].type = SANE_TYPE_BOOL;
+    s->opt[OPT_TRANSP_SW].unit = SANE_UNIT_NONE;
+    if (model->buttons & GENESYS_HAS_TRANSP_SW) {
+        s->opt[OPT_TRANSP_SW].cap = SANE_CAP_SOFT_DETECT | SANE_CAP_HARD_SELECT | SANE_CAP_ADVANCED;
+    } else {
+        s->opt[OPT_TRANSP_SW].cap = SANE_CAP_INACTIVE;
+    }
+
   /* calibration needed */
   s->opt[OPT_NEED_CALIBRATION_SW].name = "need-calibration";
   s->opt[OPT_NEED_CALIBRATION_SW].title = SANE_I18N ("Needs calibration");
@@ -5821,6 +5833,7 @@ static void get_option_value(Genesys_Scanner* s, int option, void* val)
     case OPT_OCR_SW:
     case OPT_POWER_SW:
     case OPT_EXTRA_SW:
+    case OPT_TRANSP_SW:
         s->dev->cmd_set->update_hardware_sensors(s);
         *reinterpret_cast<SANE_Bool*>(val) = s->buttons[genesys_option_to_button(option)].read();
         break;
@@ -6456,6 +6469,7 @@ GenesysButtonName genesys_option_to_button(int option)
     case OPT_OCR_SW: return BUTTON_OCR_SW;
     case OPT_POWER_SW: return BUTTON_POWER_SW;
     case OPT_EXTRA_SW: return BUTTON_EXTRA_SW;
+    case OPT_TRANSP_SW: return BUTTON_TRANSP_SW;
     default: throw std::runtime_error("Unknown option to convert to button index");
     }
 }

backend/genesys/genesys.h

@@ -124,6 +124,7 @@ enum Genesys_Option
   OPT_OCR_SW,
   OPT_POWER_SW,
   OPT_EXTRA_SW,
+  OPT_TRANSP_SW,
   OPT_NEED_CALIBRATION_SW,
   OPT_BUTTON_GROUP,
   OPT_CALIBRATE,
@@ -144,6 +145,7 @@ enum GenesysButtonName : unsigned {
     BUTTON_OCR_SW,
     BUTTON_POWER_SW,
     BUTTON_EXTRA_SW,
+    BUTTON_TRANSP_SW,
     NUM_BUTTONS
 };
 

backend/genesys/gl843.cpp

@@ -1697,7 +1697,7 @@ void CommandSetGl843::update_hardware_sensors(Genesys_Scanner* s) const
         case GpioId::G4010:
             s->buttons[BUTTON_FILE_SW].write((val & 0x01) == 0);
             s->buttons[BUTTON_COPY_SW].write((val & 0x04) == 0);
-            s->buttons[BUTTON_EXTRA_SW].write((val & 0x40) == 0);       // transparency
+            s->buttons[BUTTON_TRANSP_SW].write((val & 0x40) == 0);
             s->buttons[BUTTON_SCAN_SW].write((val & 0x08) == 0);
             break;
         case GpioId::CANON_4400F:

backend/genesys/low.h

@@ -116,6 +116,7 @@
 #define GENESYS_HAS_POWER_SW         (1 << 6)       /**< scanner has power button */
 #define GENESYS_HAS_CALIBRATE        (1 << 7)       /**< scanner has 'calibrate' software button to start calibration */
 #define GENESYS_HAS_EXTRA_SW         (1 << 8)       /**< scanner has extra function button */
+#define GENESYS_HAS_TRANSP_SW        (1 << 9)       /**< scanner has TRANSPARCY/SCAN_FILM button */
 
 /* USB control message values */
 #define REQUEST_TYPE_IN		(USB_TYPE_VENDOR | USB_DIR_IN)

backend/genesys/tables_model.cpp

@@ -347,7 +347,7 @@ void genesys_init_usb_device_tables()
     model.flags = ModelFlag::WARMUP |
                   ModelFlag::DARK_CALIBRATION |
                   ModelFlag::CUSTOM_GAMMA;
-    model.buttons = GENESYS_HAS_SCAN_SW | GENESYS_HAS_FILE_SW | GENESYS_HAS_COPY_SW | GENESYS_HAS_EXTRA_SW;
+    model.buttons = GENESYS_HAS_SCAN_SW | GENESYS_HAS_FILE_SW | GENESYS_HAS_COPY_SW | GENESYS_HAS_TRANSP_SW;
     model.search_lines = 100;
 
     s_usb_devices->emplace_back(0x03f0, 0x4505, model);