Fixed whatis/apropos output (don't put an empty line after

the NAME section). Added SEE ALSO entry to sane(7).
Henning Meier-Geinitz <henning@meier-geinitz.de>

doc/sane-artec.man

@@ -2,8 +2,7 @@
 .IX sane-artec
 
 .SH NAME
-
-sane-artec - SANE backend for Artec flatbed scanners
+sane-artec \- SANE backend for Artec flatbed scanners
 
 .SH DESCRIPTION
 The
@@ -194,7 +193,7 @@ correction is not totally working on models other than the AT3.
 
 .SH "SEE ALSO"
 
-sane\-scsi(5)
+sane(7), sane\-scsi(5)
 
 .SH AUTHOR
 

doc/sane-coolscan.man

@@ -2,7 +2,6 @@
 .IX sane-coolscan
 
 .SH NAME
-
 sane-coolscan - SANE backend for Nikon film-scanners
 
 .SH ABOUT THIS FILE
@@ -15,7 +14,7 @@ The
 .B sane-coolscan
 library implements a SANE backend that provides the interface to the following Nikon Coolscan Film scanners: Nikon LS20, LS30, LS1000, LS2000.
 
-.B Even though the backand has worked for a number of people, there are still some problems, especially in combination with some SCSI card/drivers (AHA-1505/aha152x.o) and the autofocus command. You should consider this backend 'alpha' and be carefull when using it the first time.
+.B Even though the backend has worked for a number of people, there are still some problems, especially in combination with some SCSI card/drivers (AHA-1505/aha152x.o) and the autofocus command. You should consider this backend 'alpha' and be carefull when using it the first time.
 
 .SH CONFIGURATION
 
@@ -79,7 +78,7 @@ Examples:
 
  http://andreas.rick.free.fr/sane/ The homepage of this backend
  http://www.sema.be/coolscan/  The original version of the coolscan backend by Didier
- sane-scsi(5)
+ sane(7), sane\-scsi(5)
 
 .SH THANKS TO
 

doc/sane-umax.man

@@ -2,7 +2,6 @@
 .IX sane-umax
 
 .SH NAME
-
 sane-umax - SANE backend for UMAX scanners
 
 .SH ABOUT THIS FILE
@@ -168,6 +167,9 @@ export SANE_DEBUG_UMAX=8
 
 X-resolutions greater than 600 dpi sometimes make problems
 
+.SH SEE ALSO
+sane(7)
+
 .SH AUTHOR
 
 Oliver Rauch