diff --git a/acinclude.m4 b/acinclude.m4 index 7fb5a2c6a..d6ed9abf2 100644 --- a/acinclude.m4 +++ b/acinclude.m4 @@ -232,85 +232,92 @@ AC_DEFUN(SANE_CHECK_GPHOTO2, ]) -# serial 40 AC_PROG_LIBTOOL -AC_DEFUN(AC_PROG_LIBTOOL, +# libtool.m4 - Configure libtool for the host system. -*-Shell-script-*- +## Copyright 1996, 1997, 1998, 1999, 2000, 2001 +## Free Software Foundation, Inc. +## Originally by Gordon Matzigkeit , 1996 +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, but +## WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +## General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +## +## As a special exception to the GNU General Public License, if you +## distribute this file as part of a program that contains a +## configuration script generated by Autoconf, you may include it under +## the same distribution terms that you use for the rest of that program. + +# serial 46 AC_PROG_LIBTOOL + +AC_DEFUN([AC_PROG_LIBTOOL], [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl -# Save cache, so that ltconfig can load it -AC_CACHE_SAVE - -# Actually configure libtool. ac_aux_dir is where install-sh is found. -CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ -LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ -DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ -${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ -|| AC_MSG_ERROR([libtool configure failed]) - -# Reload cache, that may have been modified by ltconfig -AC_CACHE_LOAD - # This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" +LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl -# Redirect the config.log output again, so that the ltconfig log is not -# clobbered by the next message. -exec 5>>./config.log +# Prevent multiple expansion +define([AC_PROG_LIBTOOL], []) ]) -AC_DEFUN(AC_LIBTOOL_SETUP, +AC_DEFUN([AC_LIBTOOL_SETUP], [AC_PREREQ(2.13)dnl AC_REQUIRE([AC_ENABLE_SHARED])dnl AC_REQUIRE([AC_ENABLE_STATIC])dnl AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_LD])dnl +AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl AC_REQUIRE([AC_PROG_NM])dnl AC_REQUIRE([AC_PROG_LN_S])dnl +AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl +AC_REQUIRE([AC_OBJEXT])dnl +AC_REQUIRE([AC_EXEEXT])dnl dnl -case "$target" in -NONE) lt_target="$host" ;; -*) lt_target="$target" ;; +_LT_AC_PROG_ECHO_BACKSLASH +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + AC_PATH_MAGIC + fi + ;; esac -# Check for any special flags to pass to ltconfig. -# -# the following will cause an existing older ltconfig to fail, so -# we ignore this at the expense of the cache file... Checking this -# will just take longer ... bummer! -#libtool_flags="--cache-file=$cache_file" -# -test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" -test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" -test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" -test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" -test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" -ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], -[libtool_flags="$libtool_flags --enable-dlopen"]) +AC_CHECK_TOOL(RANLIB, ranlib, :) +AC_CHECK_TOOL(STRIP, strip, :) + +ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[libtool_flags="$libtool_flags --enable-win32-dll"]) +enable_win32_dll=yes, enable_win32_dll=no) + AC_ARG_ENABLE(libtool-lock, [ --disable-libtool-lock avoid locking (might break parallel builds)]) -test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" -test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. -case "$lt_target" in +case $host in *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then - case "`/usr/bin/file conftest.o`" in + case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; @@ -330,7 +337,10 @@ case "$lt_target" in SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])]) + [AC_LANG_SAVE + AC_LANG_C + AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_RESTORE]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" @@ -338,33 +348,2894 @@ case "$lt_target" in ;; ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw*) +[*-*-cygwin* | *-*-mingw* | *-*-pw32*) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) + + # recent cygwin and mingw systems supply a stub DllMain which the user + # can override, but on older systems we have to supply one + AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, + [AC_TRY_LINK([], + [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); + DllMain (0, 0, 0);], + [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) + + case $host/$CC in + *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) + # old mingw systems require "-dll" to link a DLL, while more recent ones + # require "-mdll" + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -mdll" + AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, + [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) + CFLAGS="$SAVE_CFLAGS" ;; + *-*-cygwin* | *-*-pw32*) + # cygwin systems need to pass --dll to the linker, and not link + # crt.o which will require a WinMain@16 definition. + lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; + esac ;; -]) + ]) esac + +_LT_AC_LTCONFIG_HACK + ]) +# AC_LIBTOOL_HEADER_ASSERT +# ------------------------ +AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT], +[AC_CACHE_CHECK([whether $CC supports assert without backlinking], + [lt_cv_func_assert_works], + [case $host in + *-*-solaris*) + if test "$GCC" = yes && test "$with_gnu_ld" != yes; then + case `$CC --version 2>/dev/null` in + [[12]].*) lt_cv_func_assert_works=no ;; + *) lt_cv_func_assert_works=yes ;; + esac + fi + ;; + esac]) + +if test "x$lt_cv_func_assert_works" = xyes; then + AC_CHECK_HEADERS(assert.h) +fi +])# AC_LIBTOOL_HEADER_ASSERT + +# _LT_AC_CHECK_DLFCN +# -------------------- +AC_DEFUN([_LT_AC_CHECK_DLFCN], +[AC_CHECK_HEADERS(dlfcn.h) +])# _LT_AC_CHECK_DLFCN + +# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +# --------------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], +[AC_REQUIRE([AC_CANONICAL_HOST]) +AC_REQUIRE([AC_PROG_NM]) +AC_REQUIRE([AC_OBJEXT]) +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Transform the above into a raw symbol and a C symbol. +symxfrm='\1 \2\3 \3' + +# Transform an extracted symbol line into a proper C declaration +lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) # Its linker distinguishes data from code symbols + lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +solaris* | sysv5*) + symcode='[[BDT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# Handle CRLF in mingw tool chain +opt_cr= +case $host_os in +mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then + symcode='[[ABCDGISTW]]' +fi + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + # Write the raw and C identifiers. +lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no + rm -f conftest* + cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if egrep ' nm_test_var$' "$nlist" >/dev/null; then + if egrep ' nm_test_func$' "$nlist" >/dev/null; then + cat < conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' + + cat <> conftest.$ac_ext +#if defined (__STDC__) && __STDC__ +# define lt_ptr void * +#else +# define lt_ptr char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr address; +} +lt_preloaded_symbols[[]] = +{ +EOF + sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + save_LIBS="$LIBS" + save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$no_builtin_flag" + if AC_TRY_EVAL(ac_link) && test -s conftest; then + pipe_works=yes + fi + LIBS="$save_LIBS" + CFLAGS="$save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&AC_FD_CC + fi + else + echo "cannot find nm_test_var in $nlist" >&AC_FD_CC + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC + fi + else + echo "$progname: failed program was:" >&AC_FD_CC + cat conftest.$ac_ext >&5 + fi + rm -f conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" +if test -z "$lt_cv_sys_global_symbol_pipe"; then + global_symbol_to_cdecl= + global_symbol_to_c_name_address= +else + global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" + global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" +fi +if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; +then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi +]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE + +# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR +# --------------------------------- +AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR], +[# Find the correct PATH separator. Usually this is `:', but +# DJGPP uses `;' like DOS. +if test "X${PATH_SEPARATOR+set}" != Xset; then + UNAME=${UNAME-`uname 2>/dev/null`} + case X$UNAME in + *-DOS) lt_cv_sys_path_separator=';' ;; + *) lt_cv_sys_path_separator=':' ;; + esac + PATH_SEPARATOR=$lt_cv_sys_path_separator +fi +])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR + +# _LT_AC_PROG_ECHO_BACKSLASH +# -------------------------- +# Add some code to the start of the generated configure script which +# will find an echo command which doesn't interpret backslashes. +AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], +[ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], + [AC_DIVERT_PUSH(NOTICE)]) +_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR + +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` + ;; +esac + +echo=${ECHO-echo} +if test "X[$]1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X[$]1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} +fi + +if test "X[$]1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL [$]0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL [$]0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "[$]0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" +fi + +AC_SUBST(ECHO) +AC_DIVERT_POP +])# _LT_AC_PROG_ECHO_BACKSLASH + +# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ------------------------------------------------------------------ +AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], +[if test "$cross_compiling" = yes; then : + [$4] +else + AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +}] +EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_unknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_AC_TRY_DLOPEN_SELF + +# AC_LIBTOOL_DLOPEN_SELF +# ------------------- +AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], +[if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + cygwin* | mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +])# AC_LIBTOOL_DLOPEN_SELF + +AC_DEFUN([_LT_AC_LTCONFIG_HACK], +[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])dnl +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e s/^X//' +sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Constants: +rm="rm -f" + +# Global variables: +default_ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except M$VC, +# which needs '.lib'). +libext=a +ltmain="$ac_aux_dir/ltmain.sh" +ofile="$default_ofile" +with_gnu_ld="$lt_cv_prog_gnu_ld" +need_locks="$enable_libtool_lock" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AS" && AS=as +test -z "$CC" && CC=cc +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LD" && LD=ld +test -z "$LN_S" && LN_S="ln -s" +test -z "$MAGIC_CMD" && MAGIC_CMD=file +test -z "$NM" && NM=nm +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$RANLIB" && RANLIB=: +test -z "$STRIP" && STRIP=: +test -z "$ac_objext" && ac_objext=o + +if test x"$host" != x"$build"; then + ac_tool_prefix=${host_alias}- +else + ac_tool_prefix= +fi + +# Transform linux* to *-*-linux-gnu*, to support old configure scripts. +case $host_os in +linux-gnu*) ;; +linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` +esac + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" + ;; + *) + old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +# Allow CC to be a program name with arguments. +set dummy $CC +compiler="[$]2" + +## FIXME: this should be a separate macro +## +AC_MSG_CHECKING([for objdir]) +rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + objdir=_libs +fi +rmdir .libs 2>/dev/null +AC_MSG_RESULT($objdir) +## +## END FIXME + + +## FIXME: this should be a separate macro +## +AC_ARG_WITH(pic, +[ --with-pic try to use only PIC/non-PIC objects [default=use both]], +pic_mode="$withval", pic_mode=default) +test -z "$pic_mode" && pic_mode=default + +# We assume here that the value for lt_cv_prog_cc_pic will not be cached +# in isolation, and that seeing it set (from the cache) indicates that +# the associated values are set (in the cache) correctly too. +AC_MSG_CHECKING([for $compiler option to produce PIC]) +AC_CACHE_VAL(lt_cv_prog_cc_pic, +[ lt_cv_prog_cc_pic= + lt_cv_prog_cc_shlib= + lt_cv_prog_cc_wl= + lt_cv_prog_cc_static= + lt_cv_prog_cc_no_builtin= + lt_cv_prog_cc_can_build_shared=$can_build_shared + + if test "$GCC" = yes; then + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-static' + + case $host_os in + aix*) + # Below there is a dirty hack to force normal static linking with -ldl + # The problem is because libdl dynamically linked with both libc and + # libC (AIX C++ library), which obviously doesn't included in libraries + # list by gcc. This cause undefined symbols with -static flags. + # This hack allows C programs to be linked with "-static -ldl", but + # not sure about C++ programs. + lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_cv_prog_cc_pic='-fno-common' + ;; + cygwin* | mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_cv_prog_cc_pic='-DDLL_EXPORT' + ;; + sysv4*MP*) + if test -d /usr/nec; then + lt_cv_prog_cc_pic=-Kconform_pic + fi + ;; + *) + lt_cv_prog_cc_pic='-fPIC' + ;; + esac + else + # PORTME Check for PIC flags for the system compiler. + case $host_os in + aix3* | aix4* | aix5*) + lt_cv_prog_cc_wl='-Wl,' + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_cv_prog_cc_static='-Bstatic' + else + lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + hpux9* | hpux10* | hpux11*) + # Is there a better lt_cv_prog_cc_static that works with the bundled CC? + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" + lt_cv_prog_cc_pic='+Z' + ;; + + irix5* | irix6* | nonstopux*) + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-non_shared' + # PIC (with -KPIC) is the default. + ;; + + cygwin* | mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_cv_prog_cc_pic='-DDLL_EXPORT' + ;; + + newsos6) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + ;; + + osf3* | osf4* | osf5*) + # All OSF/1 code is PIC. + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-non_shared' + ;; + + sco3.2v5*) + lt_cv_prog_cc_pic='-Kpic' + lt_cv_prog_cc_static='-dn' + lt_cv_prog_cc_shlib='-belf' + ;; + + solaris*) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + lt_cv_prog_cc_wl='-Wl,' + ;; + + sunos4*) + lt_cv_prog_cc_pic='-PIC' + lt_cv_prog_cc_static='-Bstatic' + lt_cv_prog_cc_wl='-Qoption ld ' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + if test "x$host_vendor" = xsni; then + lt_cv_prog_cc_wl='-LD' + else + lt_cv_prog_cc_wl='-Wl,' + fi + ;; + + uts4*) + lt_cv_prog_cc_pic='-pic' + lt_cv_prog_cc_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_cv_prog_cc_pic='-Kconform_pic' + lt_cv_prog_cc_static='-Bstatic' + fi + ;; + + *) + lt_cv_prog_cc_can_build_shared=no + ;; + esac + fi +]) +if test -z "$lt_cv_prog_cc_pic"; then + AC_MSG_RESULT([none]) +else + AC_MSG_RESULT([$lt_cv_prog_cc_pic]) + + # Check to make sure the pic_flag actually works. + AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works]) + AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" + AC_TRY_COMPILE([], [], [dnl + case $host_os in + hpux9* | hpux10* | hpux11*) + # On HP-UX, both CC and GCC only warn that PIC is supported... then + # they create non-PIC objects. So, if there were any warnings, we + # assume that PIC is not supported. + if test -s conftest.err; then + lt_cv_prog_cc_pic_works=no + else + lt_cv_prog_cc_pic_works=yes + fi + ;; + *) + lt_cv_prog_cc_pic_works=yes + ;; + esac + ], [dnl + lt_cv_prog_cc_pic_works=no + ]) + CFLAGS="$save_CFLAGS" + ]) + + if test "X$lt_cv_prog_cc_pic_works" = Xno; then + lt_cv_prog_cc_pic= + lt_cv_prog_cc_can_build_shared=no + else + lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" + fi + + AC_MSG_RESULT([$lt_cv_prog_cc_pic_works]) +fi +## +## END FIXME + +# Check for any special shared library compilation flags. +if test -n "$lt_cv_prog_cc_shlib"; then + AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries]) + if echo "$old_CC $old_CFLAGS " | egrep -e "[[ ]]$lt_cv_prog_cc_shlib[[ ]]" >/dev/null; then : + else + AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure]) + lt_cv_prog_cc_can_build_shared=no + fi +fi + +## FIXME: this should be a separate macro +## +AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works]) +AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl + lt_cv_prog_cc_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" + AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes]) + LDFLAGS="$save_LDFLAGS" +]) + +# Belt *and* braces to stop my trousers falling down: +test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= +AC_MSG_RESULT([$lt_cv_prog_cc_static_works]) + +pic_flag="$lt_cv_prog_cc_pic" +special_shlib_compile_flags="$lt_cv_prog_cc_shlib" +wl="$lt_cv_prog_cc_wl" +link_static_flag="$lt_cv_prog_cc_static" +no_builtin_flag="$lt_cv_prog_cc_no_builtin" +can_build_shared="$lt_cv_prog_cc_can_build_shared" +## +## END FIXME + + +## FIXME: this should be a separate macro +## +# Check to see if options -o and -c are simultaneously supported by compiler +AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext]) +AC_CACHE_VAL([lt_cv_compiler_c_o], [ +$rm -r conftest 2>/dev/null +mkdir conftest +cd conftest +echo "int some_variable = 0;" > conftest.$ac_ext +mkdir out +# According to Tom Tromey, Ian Lance Taylor reported there are C compilers +# that will create temporary files in the current directory regardless of +# the output directory. Thus, making CWD read-only will cause this test +# to fail, enabling locking or at least warning the user not to do parallel +# builds. +chmod -w . +save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" +compiler_c_o=no +if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s out/conftest.err; then + lt_cv_compiler_c_o=no + else + lt_cv_compiler_c_o=yes + fi +else + # Append any errors to the config.log. + cat out/conftest.err 1>&AC_FD_CC + lt_cv_compiler_c_o=no +fi +CFLAGS="$save_CFLAGS" +chmod u+w . +$rm conftest* out/* +rmdir out +cd .. +rmdir conftest +$rm -r conftest 2>/dev/null +]) +compiler_c_o=$lt_cv_compiler_c_o +AC_MSG_RESULT([$compiler_c_o]) + +if test x"$compiler_c_o" = x"yes"; then + # Check to see if we can write to a .lo + AC_MSG_CHECKING([if $compiler supports -c -o file.lo]) + AC_CACHE_VAL([lt_cv_compiler_o_lo], [ + lt_cv_compiler_o_lo=no + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -c -o conftest.lo" + save_objext="$ac_objext" + ac_objext=lo + AC_TRY_COMPILE([], [int some_variable = 0;], [dnl + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + lt_cv_compiler_o_lo=no + else + lt_cv_compiler_o_lo=yes + fi + ]) + ac_objext="$save_objext" + CFLAGS="$save_CFLAGS" + ]) + compiler_o_lo=$lt_cv_compiler_o_lo + AC_MSG_RESULT([$compiler_o_lo]) +else + compiler_o_lo=no +fi +## +## END FIXME + +## FIXME: this should be a separate macro +## +# Check to see if we can do hard links to lock some files if needed +hard_links="nottested" +if test "$compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +## +## END FIXME + +## FIXME: this should be a separate macro +## +if test "$GCC" = yes; then + # Check to see if options -fno-rtti -fno-exceptions are supported by compiler + AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions]) + echo "int some_variable = 0;" > conftest.$ac_ext + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" + compiler_rtti_exceptions=no + AC_TRY_COMPILE([], [int some_variable = 0;], [dnl + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + compiler_rtti_exceptions=no + else + compiler_rtti_exceptions=yes + fi + ]) + CFLAGS="$save_CFLAGS" + AC_MSG_RESULT([$compiler_rtti_exceptions]) + + if test "$compiler_rtti_exceptions" = "yes"; then + no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' + else + no_builtin_flag=' -fno-builtin' + fi +fi +## +## END FIXME + +## FIXME: this should be a separate macro +## +# See if the linker supports building shared libraries. +AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries]) + +allow_undefined_flag= +no_undefined_flag= +need_lib_prefix=unknown +need_version=unknown +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +archive_cmds= +archive_expsym_cmds= +old_archive_from_new_cmds= +old_archive_from_expsyms_cmds= +export_dynamic_flag_spec= +whole_archive_flag_spec= +thread_safe_flag_spec= +hardcode_into_libs=no +hardcode_libdir_flag_spec= +hardcode_libdir_separator= +hardcode_direct=no +hardcode_minus_L=no +hardcode_shlibpath_var=unsupported +runpath_var= +link_all_deplibs=unknown +always_export_symbols=no +export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' +# include_expsyms should be a list of space-separated symbols to be *always* +# included in the symbol list +include_expsyms= +# exclude_expsyms can be an egrep regular expression of symbols to exclude +# it will be wrapped by ` (' and `)$', so one must not match beginning or +# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +# as well as any symbol that contains `d'. +exclude_expsyms="_GLOBAL_OFFSET_TABLE_" +# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +# platforms (ab)use it in PIC code, but their linkers get confused if +# the symbol is explicitly referenced. Since portable code cannot +# rely on this symbol name, it's probably fine to never include it in +# preloaded symbol tables. +extract_expsyms_cmds= + +case $host_os in +cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; +openbsd*) + with_gnu_ld=no + ;; +esac + +ld_shlibs=yes +if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX, the GNU linker is very broken + # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. + ld_shlibs=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can use + # them. + ld_shlibs=no + ;; + + beos*) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32*) + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + allow_undefined_flag=unsupported + always_export_symbols=yes + + extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ + sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ + test -f $output_objdir/impgen.exe || (cd $output_objdir && \ + if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ + else $CC -o impgen impgen.c ; fi)~ + $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' + + old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' + + # cygwin and mingw dlls have different entry points and sets of symbols + # to exclude. + # FIXME: what about values for MSVC? + dll_entry=__cygwin_dll_entry@12 + dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ + case $host_os in + mingw*) + # mingw values + dll_entry=_DllMainCRTStartup@12 + dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ + ;; + esac + + # mingw and cygwin differ, and it's simplest to just exclude the union + # of the two symbol sets. + dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 + + # recent cygwin and mingw systems supply a stub DllMain which the user + # can override, but on older systems we have to supply one (in ltdll.c) + if test "x$lt_cv_need_dllmain" = "xyes"; then + ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " + ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ + test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' + else + ltdll_obj= + ltdll_cmds= + fi + + # Extract the symbol export list from an `--export-all' def file, + # then regenerate the def file from the symbol export list, so that + # the compiled dll only exports the symbol export list. + # Be careful not to strip the DATA tag left be newer dlltools. + export_symbols_cmds="$ltdll_cmds"' + $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ + sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' + + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is. + # If DATA tags from a recent dlltool are present, honour them! + archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname-def; + else + echo EXPORTS > $output_objdir/$soname-def; + _lt_hint=1; + cat $export_symbols | while read symbol; do + set dummy \$symbol; + case \[$]# in + 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; + *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;; + esac; + _lt_hint=`expr 1 + \$_lt_hint`; + done; + fi~ + '"$ltdll_cmds"' + $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ + $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ + $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ + $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ + $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris* | sysv5*) + if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = yes; then + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + case $host_os in + cygwin* | mingw* | pw32*) + # dlltool doesn't understand --whole-archive et. al. + whole_archive_flag_spec= + ;; + *) + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + ;; + esac + fi +else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + hardcode_direct=yes + archive_cmds='' + hardcode_libdir_separator=':' + if test "$GCC" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct=yes + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + esac + + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + shared_flag='${wl}-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall can do strange things, so it is better to + # generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' + archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='${wl}-berok' + # This is a bit strange, but is similar to how AIX traditionally builds + # it's shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname' + fi + fi + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + # see comment about different semantics on the GNU ld section + ld_shlibs=no + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + ;; + + darwin* | rhapsody*) + case "$host_os" in + rhapsody* | darwin1.[[012]]) + allow_undefined_flag='-undefined suppress' + ;; + *) # Darwin 1.3 on + allow_undefined_flag='-flat_namespace -undefined suppress' + ;; + esac + # FIXME: Relying on posixy $() will cause problems for + # cross-compilation, but unfortunately the echo tests do not + # yet detect zsh echo's removal of \ escapes. Also zsh mangles + # `"' quotes if we put them in here... so don't! + archive_cmds='$nonopt $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' + # We need to add '_' to the symbols in $export_symbols first + #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' + hardcode_direct=yes + hardcode_shlibpath_var=no + whole_archive_flag_spec='-all_load $convenience' + ;; + + freebsd1*) + ld_shlibs=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9* | hpux10* | hpux11*) + case $host_os in + hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; + *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; + esac + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_minus_L=yes # Not in the search PATH, but as the default + # location of the library. + export_dynamic_flag_spec='${wl}-E' + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + link_all_deplibs=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + openbsd*) + hardcode_direct=yes + hardcode_shlibpath_var=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case "$host_os" in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + + #Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + hardcode_libdir_separator=: + ;; + + sco3.2v5*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + export_dynamic_flag_spec='${wl}-Bexport' + ;; + + solaris*) + # gcc --version < 3.0 without binutils cannot create self contained + # shared libraries reliably, requiring libgcc.a to resolve some of + # the object symbols generated in some cases. Libraries that use + # assert need libgcc.a to resolve __eprintf, for example. Linking + # a copy of libgcc.a into every shared library to guarantee resolving + # such symbols causes other problems: According to Tim Van Holder + # , C++ libraries end up with a separate + # (to the application) exception stack for one thing. + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + case `$CC --version 2>/dev/null` in + [[12]].*) + cat <&2 + +*** Warning: Releases of GCC earlier than version 3.0 cannot reliably +*** create self contained shared libraries on Solaris systems, without +*** introducing a dependency on libgcc.a. Therefore, libtool is disabling +*** -no-undefined support, which will at least allow you to build shared +*** libraries. However, you may find that when you link such libraries +*** into an application without using GCC, you have to manually add +*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to +*** upgrade to a newer version of GCC. Another option is to rebuild your +*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. + +EOF + no_undefined_flag= + ;; + esac + fi + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + if test "x$host_vendor" = xsno; then + archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + else + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + fi + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv5*) + no_undefined_flag=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + hardcode_libdir_flag_spec= + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4.2uw2*) + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=no + hardcode_shlibpath_var=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; + + sysv5uw7* | unixware7*) + no_undefined_flag='${wl}-z ${wl}text' + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac +fi +AC_MSG_RESULT([$ld_shlibs]) +test "$ld_shlibs" = no && can_build_shared=no +## +## END FIXME + +## FIXME: this should be a separate macro +## +# Check hardcoding attributes. +AC_MSG_CHECKING([how to hardcode library paths into programs]) +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || \ + test -n "$runpath_var"; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$hardcode_shlibpath_var" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +AC_MSG_RESULT([$hardcode_action]) +## +## END FIXME + +## FIXME: this should be a separate macro +## +striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else + AC_MSG_RESULT([no]) +fi +## +## END FIXME + +reload_cmds='$LD$reload_flag -o $output$reload_objs' +test -z "$deplibs_check_method" && deplibs_check_method=unknown + +## FIXME: this should be a separate macro +## +# PORTME Fill in your ld.so characteristics +AC_MSG_CHECKING([dynamic linker characteristics]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}.so$major' + ;; + +aix4* | aix5*) + version_type=linux + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can + # not hardcode correct soname into executable. Probably we can + # add versioning support to collect2, so additional links can + # be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}.so$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}.so' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi4*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + export_dynamic_flag_spec=-rdynamic + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + need_version=no + need_lib_prefix=no + case $GCC,$host_os in + yes,cygwin*) + library_names_spec='$libname.dll.a' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' + postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog .libs/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + ;; + yes,mingw*) + library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` + ;; + yes,pw32*) + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' + ;; + *) + library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + # FIXME: Relying on posixy $() will cause problems for + # cross-compilation, but unfortunately the echo tests do not + # yet detect zsh echo's removal of \ escapes. + library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' + soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + *) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + dynamic_linker="$host_os dld.sl" + version_type=sunos + need_lib_prefix=no + need_version=no + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' + soname_spec='${libname}${release}.sl$major' + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) version_type=irix ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux-gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' + soname_spec='${libname}${release}.so$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case "$host_os" in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + ;; + +os2*) + libname_spec='$name' + need_lib_prefix=no + library_names_spec='$libname.dll $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_version=no + need_lib_prefix=no + soname_spec='${libname}${release}.so' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' + soname_spec='$libname.so.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no +## +## END FIXME + +## FIXME: this should be a separate macro +## +# Report the final consequences. +AC_MSG_CHECKING([if libtool supports shared libraries]) +AC_MSG_RESULT([$can_build_shared]) +## +## END FIXME + +## FIXME: this should be a separate macro +## +AC_MSG_CHECKING([whether to build shared libraries]) +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + +aix4*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; +esac +AC_MSG_RESULT([$enable_shared]) +## +## END FIXME + +## FIXME: this should be a separate macro +## +AC_MSG_CHECKING([whether to build static libraries]) +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +AC_MSG_RESULT([$enable_static]) +## +## END FIXME + +if test "$hardcode_action" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +AC_LIBTOOL_DLOPEN_SELF + +## FIXME: this should be a separate macro +## +if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_MSG_CHECKING([whether -lc should be explicitly linked in]) + AC_CACHE_VAL([lt_cv_archive_cmds_need_lc], + [$rm conftest* + echo 'static int dummy;' > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile); then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_cv_prog_cc_wl + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi]) + AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc]) + ;; + esac +fi +need_lc=${lt_cv_archive_cmds_need_lc-yes} +## +## END FIXME + +## FIXME: this should be a separate macro +## +# The second clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + : +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + test -f Makefile && make "$ltmain" +fi + +if test -f "$ltmain"; then + trap "$rm \"${ofile}T\"; exit 1" 1 2 15 + $rm -f "${ofile}T" + + echo creating $ofile + + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS \ + AR AR_FLAGS CC LD LN_S NM SHELL \ + reload_flag reload_cmds wl \ + pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ + thread_safe_flag_spec whole_archive_flag_spec libname_spec \ + library_names_spec soname_spec \ + RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ + old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ + postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ + old_striplib striplib file_magic_cmd export_symbols_cmds \ + deplibs_check_method allow_undefined_flag no_undefined_flag \ + finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ + global_symbol_to_c_name_address \ + hardcode_libdir_flag_spec hardcode_libdir_separator \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do + + case $var in + reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ + extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + cat <<__EOF__ > "${ofile}T" +#! $SHELL + +# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996-2000 Free Software Foundation, Inc. +# Originally by Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="sed -e s/^X//" + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + +# ### BEGIN LIBTOOL CONFIG + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$need_lc + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# The default C compiler. +CC=$lt_CC + +# Is the compiler the GNU C compiler? +with_gcc=$GCC + +# The linker used to build libraries. +LD=$lt_LD + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_wl + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_pic_flag +pic_mode=$pic_mode + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_compiler_c_o + +# Can we write directly to a .lo ? +compiler_o_lo=$lt_compiler_o_lo + +# Must we lock files when doing compilation ? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_link_static_flag + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_no_builtin_flag + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path" + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# ### END LIBTOOL CONFIG + +__EOF__ + + case $host_os in + aix3*) + cat <<\EOF >> "${ofile}T" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + esac + + case $host_os in + cygwin* | mingw* | pw32* | os2*) + cat <<'EOF' >> "${ofile}T" + # This is a source program that is used to create dlls on Windows + # Don't remove nor modify the starting and closing comments +# /* ltdll.c starts here */ +# #define WIN32_LEAN_AND_MEAN +# #include +# #undef WIN32_LEAN_AND_MEAN +# #include +# +# #ifndef __CYGWIN__ +# # ifdef __CYGWIN32__ +# # define __CYGWIN__ __CYGWIN32__ +# # endif +# #endif +# +# #ifdef __cplusplus +# extern "C" { +# #endif +# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +# #ifdef __cplusplus +# } +# #endif +# +# #ifdef __CYGWIN__ +# #include +# DECLARE_CYGWIN_DLL( DllMain ); +# #endif +# HINSTANCE __hDllInstance_base; +# +# BOOL APIENTRY +# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +# { +# __hDllInstance_base = hInst; +# return TRUE; +# } +# /* ltdll.c ends here */ + # This is a source program that is used to create import libraries + # on Windows for dlls which lack them. Don't remove nor modify the + # starting and closing comments +# /* impgen.c starts here */ +# /* Copyright (C) 1999-2000 Free Software Foundation, Inc. +# +# This file is part of GNU libtool. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# */ +# +# #include /* for printf() */ +# #include /* for open(), lseek(), read() */ +# #include /* for O_RDONLY, O_BINARY */ +# #include /* for strdup() */ +# +# /* O_BINARY isn't required (or even defined sometimes) under Unix */ +# #ifndef O_BINARY +# #define O_BINARY 0 +# #endif +# +# static unsigned int +# pe_get16 (fd, offset) +# int fd; +# int offset; +# { +# unsigned char b[2]; +# lseek (fd, offset, SEEK_SET); +# read (fd, b, 2); +# return b[0] + (b[1]<<8); +# } +# +# static unsigned int +# pe_get32 (fd, offset) +# int fd; +# int offset; +# { +# unsigned char b[4]; +# lseek (fd, offset, SEEK_SET); +# read (fd, b, 4); +# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +# } +# +# static unsigned int +# pe_as32 (ptr) +# void *ptr; +# { +# unsigned char *b = ptr; +# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +# } +# +# int +# main (argc, argv) +# int argc; +# char *argv[]; +# { +# int dll; +# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; +# unsigned long export_rva, export_size, nsections, secptr, expptr; +# unsigned long name_rvas, nexp; +# unsigned char *expdata, *erva; +# char *filename, *dll_name; +# +# filename = argv[1]; +# +# dll = open(filename, O_RDONLY|O_BINARY); +# if (dll < 1) +# return 1; +# +# dll_name = filename; +# +# for (i=0; filename[i]; i++) +# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') +# dll_name = filename + i +1; +# +# pe_header_offset = pe_get32 (dll, 0x3c); +# opthdr_ofs = pe_header_offset + 4 + 20; +# num_entries = pe_get32 (dll, opthdr_ofs + 92); +# +# if (num_entries < 1) /* no exports */ +# return 1; +# +# export_rva = pe_get32 (dll, opthdr_ofs + 96); +# export_size = pe_get32 (dll, opthdr_ofs + 100); +# nsections = pe_get16 (dll, pe_header_offset + 4 +2); +# secptr = (pe_header_offset + 4 + 20 + +# pe_get16 (dll, pe_header_offset + 4 + 16)); +# +# expptr = 0; +# for (i = 0; i < nsections; i++) +# { +# char sname[8]; +# unsigned long secptr1 = secptr + 40 * i; +# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); +# unsigned long vsize = pe_get32 (dll, secptr1 + 16); +# unsigned long fptr = pe_get32 (dll, secptr1 + 20); +# lseek(dll, secptr1, SEEK_SET); +# read(dll, sname, 8); +# if (vaddr <= export_rva && vaddr+vsize > export_rva) +# { +# expptr = fptr + (export_rva - vaddr); +# if (export_rva + export_size > vaddr + vsize) +# export_size = vsize - (export_rva - vaddr); +# break; +# } +# } +# +# expdata = (unsigned char*)malloc(export_size); +# lseek (dll, expptr, SEEK_SET); +# read (dll, expdata, export_size); +# erva = expdata - export_rva; +# +# nexp = pe_as32 (expdata+24); +# name_rvas = pe_as32 (expdata+32); +# +# printf ("EXPORTS\n"); +# for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) + + mv -f "${ofile}T" "$ofile" || \ + (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") + chmod +x "$ofile" +fi +## +## END FIXME + +])# _LT_AC_LTCONFIG_HACK + # AC_LIBTOOL_DLOPEN - enable checks for dlopen support -AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) +AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) # AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's -AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) +AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) # AC_ENABLE_SHARED - implement the --enable-shared flag # Usage: AC_ENABLE_SHARED[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. -AC_DEFUN(AC_ENABLE_SHARED, [dnl -define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +AC_DEFUN([AC_ENABLE_SHARED], +[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(shared, changequote(<<, >>)dnl << --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} -case "$enableval" in +case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) @@ -383,21 +3254,22 @@ enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl ]) # AC_DISABLE_SHARED - set the default shared flag to --disable-shared -AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_DEFUN([AC_DISABLE_SHARED], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_SHARED(no)]) # AC_ENABLE_STATIC - implement the --enable-static flag # Usage: AC_ENABLE_STATIC[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. -AC_DEFUN(AC_ENABLE_STATIC, [dnl -define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +AC_DEFUN([AC_ENABLE_STATIC], +[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(static, changequote(<<, >>)dnl << --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} -case "$enableval" in +case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) @@ -416,7 +3288,8 @@ enable_static=AC_ENABLE_STATIC_DEFAULT)dnl ]) # AC_DISABLE_STATIC - set the default static flag to --disable-static -AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_DEFUN([AC_DISABLE_STATIC], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_STATIC(no)]) @@ -424,14 +3297,14 @@ AC_ENABLE_STATIC(no)]) # Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. -AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl -define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +AC_DEFUN([AC_ENABLE_FAST_INSTALL], +[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(fast-install, changequote(<<, >>)dnl << --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} -case "$enableval" in +case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) @@ -449,29 +3322,120 @@ esac], enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl ]) -# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install -AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install +AC_DEFUN([AC_DISABLE_FAST_INSTALL], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_FAST_INSTALL(no)]) +# AC_LIBTOOL_PICMODE - implement the --with-pic flag +# Usage: AC_LIBTOOL_PICMODE[(MODE)] +# Where MODE is either `yes' or `no'. If omitted, it defaults to +# `both'. +AC_DEFUN([AC_LIBTOOL_PICMODE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +pic_mode=ifelse($#,1,$1,default)]) + + +# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library +AC_DEFUN([AC_PATH_TOOL_PREFIX], +[AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in + /*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; + ?:/*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. + ;; + *) + ac_save_MAGIC_CMD="$MAGIC_CMD" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="ifelse([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + egrep "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$ac_save_ifs" + MAGIC_CMD="$ac_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +]) + + +# AC_PATH_MAGIC - find a file program which can recognise a shared library +AC_DEFUN([AC_PATH_MAGIC], +[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl +AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH) + else + MAGIC_CMD=: + fi +fi +]) + + # AC_PROG_LD - find the path to the GNU or non-GNU linker -AC_DEFUN(AC_PROG_LD, +AC_DEFUN([AC_PROG_LD], [AC_ARG_WITH(gnu-ld, [ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl ac_prog=ld -if test "$ac_cv_prog_gcc" = yes; then +if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) - ac_prog=`($CC -print-prog-name=ld) 2>&5` - case "$ac_prog" in + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in # Accept absolute paths. -changequote(,)dnl - [\\/]* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' -changequote([,])dnl + [[\\/]]* | [[A-Za-z]]:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do @@ -493,17 +3457,17 @@ elif test "$with_gnu_ld" = yes; then else AC_MSG_CHECKING([for non-GNU ld]) fi -AC_CACHE_VAL(ac_cv_path_LD, +AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - ac_cv_path_LD="$ac_dir/$ac_prog" + lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. - if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break @@ -512,9 +3476,9 @@ AC_CACHE_VAL(ac_cv_path_LD, done IFS="$ac_save_ifs" else - ac_cv_path_LD="$LD" # Let the user override the test with a path. + lt_cv_path_LD="$LD" # Let the user override the test with a path. fi]) -LD="$ac_cv_path_LD" +LD="$lt_cv_path_LD" if test -n "$LD"; then AC_MSG_RESULT($LD) else @@ -524,56 +3488,246 @@ test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) AC_PROG_LD_GNU ]) -AC_DEFUN(AC_PROG_LD_GNU, -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, +# AC_PROG_LD_GNU - +AC_DEFUN([AC_PROG_LD_GNU], +[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then - ac_cv_prog_gnu_ld=yes + lt_cv_prog_gnu_ld=yes else - ac_cv_prog_gnu_ld=no + lt_cv_prog_gnu_ld=no fi]) +with_gnu_ld=$lt_cv_prog_gnu_ld ]) +# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker +# -- PORTME Some linkers may need a different reload flag. +AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], +[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag, +[lt_cv_ld_reload_flag='-r']) +reload_flag=$lt_cv_ld_reload_flag +test -n "$reload_flag" && reload_flag=" $reload_flag" +]) + +# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies +# -- PORTME fill in with the dynamic library characteristics +AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], +[AC_CACHE_CHECK([how to recognise dependant libraries], +lt_cv_deplibs_check_method, +[lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given egrep regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix4* | aix5*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi4*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin* | mingw* | pw32*) + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' + lt_cv_file_magic_cmd='/usr/bin/file -L' + case "$host_os" in + rhapsody* | darwin1.[[012]]) + lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` + ;; + *) # Darwin 1.3 on + lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' + ;; + esac + ;; + +freebsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20*|hpux11*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + irix5* | nonstopux*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" + ;; + *) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" + ;; + esac + lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux-gnu*) + lt_cv_deplibs_check_method=pass_all + lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +openbsd*) + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' + else + lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' + fi + ;; + +osf3* | osf4* | osf5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' + lt_cv_file_magic_test_file=/shlib/libc.so + lt_cv_deplibs_check_method=pass_all + ;; + +sco3.2v5*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + lt_cv_file_magic_test_file=/lib/libc.so + ;; + +sysv5uw[[78]]* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + esac + ;; +esac +]) +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +]) + + # AC_PROG_NM - find the path to a BSD-compatible name lister -AC_DEFUN(AC_PROG_NM, -[AC_MSG_CHECKING([for BSD-compatible nm]) -AC_CACHE_VAL(ac_cv_path_NM, +AC_DEFUN([AC_PROG_NM], +[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl +AC_MSG_CHECKING([for BSD-compatible nm]) +AC_CACHE_VAL(lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. - ac_cv_path_NM="$NM" + lt_cv_path_NM="$NM" else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then + tmp_nm=$ac_dir/${ac_tool_prefix}nm + if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" + # Tru64's nm complains that /dev/null is an invalid object file + if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then + lt_cv_path_NM="$tmp_nm -B" break - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" + elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + lt_cv_path_NM="$tmp_nm -p" break else - ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags fi fi done IFS="$ac_save_ifs" - test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi]) -NM="$ac_cv_path_NM" +NM="$lt_cv_path_NM" AC_MSG_RESULT([$NM]) ]) # AC_CHECK_LIBM - check for math library -AC_DEFUN(AC_CHECK_LIBM, +AC_DEFUN([AC_CHECK_LIBM], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= -case "$lt_target" in -*-*-beos* | *-*-cygwin*) +case $host in +*-*-beos* | *-*-cygwin* | *-*-pw32*) # These system don't have libm ;; *-ncr-sysv4.3*) @@ -587,37 +3741,41 @@ esac ]) # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl convenience library and INCLTDL to the include flags for +# the libltdl convenience library and LTDLINCL to the include flags for # the libltdl header and adds --enable-ltdl-convenience to the -# configure arguments. Note that LIBLTDL and INCLTDL are not +# configure arguments. Note that LIBLTDL and LTDLINCL are not # AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not # provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed -# with '${top_builddir}/' and INCLTDL will be prefixed with +# with '${top_builddir}/' and LTDLINCL will be prefixed with # '${top_srcdir}/' (note the single quotes!). If your package is not # flat and you're not using automake, define top_builddir and # top_srcdir appropriately in the Makefiles. -AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case "$enable_ltdl_convenience" in +AC_DEFUN([AC_LIBLTDL_CONVENIENCE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + case $enable_ltdl_convenience in no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; "") enable_ltdl_convenience=yes ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; esac LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" ]) # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl installable library and INCLTDL to the include flags for +# the libltdl installable library and LTDLINCL to the include flags for # the libltdl header and adds --enable-ltdl-install to the configure -# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is +# arguments. Note that LIBLTDL and LTDLINCL are not AC_SUBSTed, nor is # AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed # libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will -# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed +# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed # with '${top_srcdir}/' (note the single quotes!). If your package is # not flat and you're not using automake, define top_builddir and # top_srcdir appropriately in the Makefiles. # In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_DEFUN([AC_LIBLTDL_INSTALLABLE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_CHECK_LIB(ltdl, main, [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], [if test x"$enable_ltdl_install" = xno; then @@ -629,112 +3787,24 @@ AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl if test x"$enable_ltdl_install" = x"yes"; then ac_configure_args="$ac_configure_args --enable-ltdl-install" LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) else ac_configure_args="$ac_configure_args --enable-ltdl-install=no" LIBLTDL="-lltdl" - INCLTDL= + LTDLINCL= fi + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" ]) -dnl old names -AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl -AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl -AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl -AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl -AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl -AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl -AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl - -dnl This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL])dnl - - -# serial 1 - -# @defmac AC_PROG_CC_STDC -# @maindex PROG_CC_STDC -# @ovindex CC -# If the C compiler in not in ANSI C mode by default, try to add an option -# to output variable @code{CC} to make it so. This macro tries various -# options that select ANSI C on some system or another. It considers the -# compiler to be in ANSI C mode if it handles function prototypes correctly. -# -# If you use this macro, you should check after calling it whether the C -# compiler has been set to accept ANSI C; if not, the shell variable -# @code{am_cv_prog_cc_stdc} is set to @samp{no}. If you wrote your source -# code in ANSI C, you can make an un-ANSIfied copy of it by using the -# program @code{ansi2knr}, which comes with Ghostscript. -# @end defmac - -AC_DEFUN(AM_PROG_CC_STDC, -[AC_REQUIRE([AC_PROG_CC]) -AC_BEFORE([$0], [AC_C_INLINE]) -AC_BEFORE([$0], [AC_C_CONST]) -dnl Force this before AC_PROG_CPP. Some cpp's, eg on HPUX, require -dnl a magic option to avoid problems with ANSI preprocessor commands -dnl like #elif. -dnl FIXME: can't do this because then AC_AIX won't work due to a -dnl circular dependency. -dnl AC_BEFORE([$0], [AC_PROG_CPP]) -AC_MSG_CHECKING(for ${CC-cc} option to accept ANSI C) -AC_CACHE_VAL(am_cv_prog_cc_stdc, -[am_cv_prog_cc_stdc=no -ac_save_CC="$CC" -# Don't try gcc -ansi; that turns off useful extensions and -# breaks some systems' header files. -# AIX -qlanglvl=ansi -# Ultrix and OSF/1 -std1 -# HP-UX -Aa -D_HPUX_SOURCE -# SVR4 -Xc -D__EXTENSIONS__ -for ac_arg in "" -qlanglvl=ansi -std1 "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - AC_TRY_COMPILE( -[#include -#include -#include -#include -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -], [ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; -], -[am_cv_prog_cc_stdc="$ac_arg"; break]) -done -CC="$ac_save_CC" -]) -if test -z "$am_cv_prog_cc_stdc"; then - AC_MSG_RESULT([none needed]) -else - AC_MSG_RESULT($am_cv_prog_cc_stdc) -fi -case "x$am_cv_prog_cc_stdc" in - x|xno) ;; - *) CC="$CC $am_cv_prog_cc_stdc" ;; -esac -]) - +# old names +AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) +AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) +AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) +AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) +AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) +# This is just to silence aclocal about the macro not being used +ifelse([AC_DISABLE_FAST_INSTALL]) diff --git a/aclocal.m4 b/aclocal.m4 index 00907525a..13daf2285 100644 --- a/aclocal.m4 +++ b/aclocal.m4 @@ -1,6 +1,6 @@ -dnl aclocal.m4 generated automatically by aclocal 1.4-p5 +dnl aclocal.m4 generated automatically by aclocal 1.4-p4 -dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. +dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. @@ -244,85 +244,70 @@ AC_DEFUN(SANE_CHECK_GPHOTO2, ]) -# serial 40 AC_PROG_LIBTOOL -AC_DEFUN(AC_PROG_LIBTOOL, +# libtool.m4 - Configure libtool for the host system. -*-Shell-script-*- + +# serial 46 AC_PROG_LIBTOOL + +AC_DEFUN([AC_PROG_LIBTOOL], [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl -# Save cache, so that ltconfig can load it -AC_CACHE_SAVE - -# Actually configure libtool. ac_aux_dir is where install-sh is found. -CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ -LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ -DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ -${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ -|| AC_MSG_ERROR([libtool configure failed]) - -# Reload cache, that may have been modified by ltconfig -AC_CACHE_LOAD - # This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" +LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl -# Redirect the config.log output again, so that the ltconfig log is not -# clobbered by the next message. -exec 5>>./config.log +# Prevent multiple expansion +define([AC_PROG_LIBTOOL], []) ]) -AC_DEFUN(AC_LIBTOOL_SETUP, +AC_DEFUN([AC_LIBTOOL_SETUP], [AC_PREREQ(2.13)dnl AC_REQUIRE([AC_ENABLE_SHARED])dnl AC_REQUIRE([AC_ENABLE_STATIC])dnl AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_LD])dnl +AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl AC_REQUIRE([AC_PROG_NM])dnl AC_REQUIRE([AC_PROG_LN_S])dnl +AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl +AC_REQUIRE([AC_OBJEXT])dnl +AC_REQUIRE([AC_EXEEXT])dnl dnl -case "$target" in -NONE) lt_target="$host" ;; -*) lt_target="$target" ;; +_LT_AC_PROG_ECHO_BACKSLASH +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + AC_PATH_MAGIC + fi + ;; esac -# Check for any special flags to pass to ltconfig. -# -# the following will cause an existing older ltconfig to fail, so -# we ignore this at the expense of the cache file... Checking this -# will just take longer ... bummer! -#libtool_flags="--cache-file=$cache_file" -# -test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" -test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" -test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" -test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" -test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" -ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], -[libtool_flags="$libtool_flags --enable-dlopen"]) +AC_CHECK_TOOL(RANLIB, ranlib, :) +AC_CHECK_TOOL(STRIP, strip, :) + +ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[libtool_flags="$libtool_flags --enable-win32-dll"]) +enable_win32_dll=yes, enable_win32_dll=no) + AC_ARG_ENABLE(libtool-lock, [ --disable-libtool-lock avoid locking (might break parallel builds)]) -test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" -test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. -case "$lt_target" in +case $host in *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then - case "`/usr/bin/file conftest.o`" in + case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; @@ -342,7 +327,10 @@ case "$lt_target" in SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])]) + [AC_LANG_SAVE + AC_LANG_C + AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_RESTORE]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" @@ -350,33 +338,2834 @@ case "$lt_target" in ;; ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw*) +[*-*-cygwin* | *-*-mingw* | *-*-pw32*) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) + + # recent cygwin and mingw systems supply a stub DllMain which the user + # can override, but on older systems we have to supply one + AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, + [AC_TRY_LINK([], + [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); + DllMain (0, 0, 0);], + [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) + + case $host/$CC in + *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) + # old mingw systems require "-dll" to link a DLL, while more recent ones + # require "-mdll" + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -mdll" + AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, + [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) + CFLAGS="$SAVE_CFLAGS" ;; + *-*-cygwin* | *-*-pw32*) + # cygwin systems need to pass --dll to the linker, and not link + # crt.o which will require a WinMain@16 definition. + lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; + esac ;; -]) + ]) esac + +_LT_AC_LTCONFIG_HACK + ]) +# AC_LIBTOOL_HEADER_ASSERT +# ------------------------ +AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT], +[AC_CACHE_CHECK([whether $CC supports assert without backlinking], + [lt_cv_func_assert_works], + [case $host in + *-*-solaris*) + if test "$GCC" = yes && test "$with_gnu_ld" != yes; then + case `$CC --version 2>/dev/null` in + [[12]].*) lt_cv_func_assert_works=no ;; + *) lt_cv_func_assert_works=yes ;; + esac + fi + ;; + esac]) + +if test "x$lt_cv_func_assert_works" = xyes; then + AC_CHECK_HEADERS(assert.h) +fi +])# AC_LIBTOOL_HEADER_ASSERT + +# _LT_AC_CHECK_DLFCN +# -------------------- +AC_DEFUN([_LT_AC_CHECK_DLFCN], +[AC_CHECK_HEADERS(dlfcn.h) +])# _LT_AC_CHECK_DLFCN + +# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +# --------------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], +[AC_REQUIRE([AC_CANONICAL_HOST]) +AC_REQUIRE([AC_PROG_NM]) +AC_REQUIRE([AC_OBJEXT]) +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Transform the above into a raw symbol and a C symbol. +symxfrm='\1 \2\3 \3' + +# Transform an extracted symbol line into a proper C declaration +lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) # Its linker distinguishes data from code symbols + lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +solaris* | sysv5*) + symcode='[[BDT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# Handle CRLF in mingw tool chain +opt_cr= +case $host_os in +mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then + symcode='[[ABCDGISTW]]' +fi + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + # Write the raw and C identifiers. +lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no + rm -f conftest* + cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if egrep ' nm_test_var$' "$nlist" >/dev/null; then + if egrep ' nm_test_func$' "$nlist" >/dev/null; then + cat < conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' + + cat <> conftest.$ac_ext +#if defined (__STDC__) && __STDC__ +# define lt_ptr void * +#else +# define lt_ptr char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr address; +} +lt_preloaded_symbols[[]] = +{ +EOF + sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + save_LIBS="$LIBS" + save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$no_builtin_flag" + if AC_TRY_EVAL(ac_link) && test -s conftest; then + pipe_works=yes + fi + LIBS="$save_LIBS" + CFLAGS="$save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&AC_FD_CC + fi + else + echo "cannot find nm_test_var in $nlist" >&AC_FD_CC + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC + fi + else + echo "$progname: failed program was:" >&AC_FD_CC + cat conftest.$ac_ext >&5 + fi + rm -f conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" +if test -z "$lt_cv_sys_global_symbol_pipe"; then + global_symbol_to_cdecl= + global_symbol_to_c_name_address= +else + global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" + global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" +fi +if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; +then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi +]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE + +# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR +# --------------------------------- +AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR], +[# Find the correct PATH separator. Usually this is `:', but +# DJGPP uses `;' like DOS. +if test "X${PATH_SEPARATOR+set}" != Xset; then + UNAME=${UNAME-`uname 2>/dev/null`} + case X$UNAME in + *-DOS) lt_cv_sys_path_separator=';' ;; + *) lt_cv_sys_path_separator=':' ;; + esac + PATH_SEPARATOR=$lt_cv_sys_path_separator +fi +])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR + +# _LT_AC_PROG_ECHO_BACKSLASH +# -------------------------- +# Add some code to the start of the generated configure script which +# will find an echo command which doesn't interpret backslashes. +AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], +[ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], + [AC_DIVERT_PUSH(NOTICE)]) +_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR + +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` + ;; +esac + +echo=${ECHO-echo} +if test "X[$]1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X[$]1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} +fi + +if test "X[$]1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL [$]0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL [$]0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "[$]0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" +fi + +AC_SUBST(ECHO) +AC_DIVERT_POP +])# _LT_AC_PROG_ECHO_BACKSLASH + +# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ------------------------------------------------------------------ +AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], +[if test "$cross_compiling" = yes; then : + [$4] +else + AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +}] +EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_unknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_AC_TRY_DLOPEN_SELF + +# AC_LIBTOOL_DLOPEN_SELF +# ------------------- +AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], +[if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + cygwin* | mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +])# AC_LIBTOOL_DLOPEN_SELF + +AC_DEFUN([_LT_AC_LTCONFIG_HACK], +[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])dnl +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e s/^X//' +sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Constants: +rm="rm -f" + +# Global variables: +default_ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except M$VC, +# which needs '.lib'). +libext=a +ltmain="$ac_aux_dir/ltmain.sh" +ofile="$default_ofile" +with_gnu_ld="$lt_cv_prog_gnu_ld" +need_locks="$enable_libtool_lock" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AS" && AS=as +test -z "$CC" && CC=cc +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LD" && LD=ld +test -z "$LN_S" && LN_S="ln -s" +test -z "$MAGIC_CMD" && MAGIC_CMD=file +test -z "$NM" && NM=nm +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$RANLIB" && RANLIB=: +test -z "$STRIP" && STRIP=: +test -z "$ac_objext" && ac_objext=o + +if test x"$host" != x"$build"; then + ac_tool_prefix=${host_alias}- +else + ac_tool_prefix= +fi + +# Transform linux* to *-*-linux-gnu*, to support old configure scripts. +case $host_os in +linux-gnu*) ;; +linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` +esac + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" + ;; + *) + old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +# Allow CC to be a program name with arguments. +set dummy $CC +compiler="[$]2" + +AC_MSG_CHECKING([for objdir]) +rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + objdir=_libs +fi +rmdir .libs 2>/dev/null +AC_MSG_RESULT($objdir) + + +AC_ARG_WITH(pic, +[ --with-pic try to use only PIC/non-PIC objects [default=use both]], +pic_mode="$withval", pic_mode=default) +test -z "$pic_mode" && pic_mode=default + +# We assume here that the value for lt_cv_prog_cc_pic will not be cached +# in isolation, and that seeing it set (from the cache) indicates that +# the associated values are set (in the cache) correctly too. +AC_MSG_CHECKING([for $compiler option to produce PIC]) +AC_CACHE_VAL(lt_cv_prog_cc_pic, +[ lt_cv_prog_cc_pic= + lt_cv_prog_cc_shlib= + lt_cv_prog_cc_wl= + lt_cv_prog_cc_static= + lt_cv_prog_cc_no_builtin= + lt_cv_prog_cc_can_build_shared=$can_build_shared + + if test "$GCC" = yes; then + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-static' + + case $host_os in + aix*) + # Below there is a dirty hack to force normal static linking with -ldl + # The problem is because libdl dynamically linked with both libc and + # libC (AIX C++ library), which obviously doesn't included in libraries + # list by gcc. This cause undefined symbols with -static flags. + # This hack allows C programs to be linked with "-static -ldl", but + # not sure about C++ programs. + lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_cv_prog_cc_pic='-fno-common' + ;; + cygwin* | mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_cv_prog_cc_pic='-DDLL_EXPORT' + ;; + sysv4*MP*) + if test -d /usr/nec; then + lt_cv_prog_cc_pic=-Kconform_pic + fi + ;; + *) + lt_cv_prog_cc_pic='-fPIC' + ;; + esac + else + # PORTME Check for PIC flags for the system compiler. + case $host_os in + aix3* | aix4* | aix5*) + lt_cv_prog_cc_wl='-Wl,' + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_cv_prog_cc_static='-Bstatic' + else + lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + hpux9* | hpux10* | hpux11*) + # Is there a better lt_cv_prog_cc_static that works with the bundled CC? + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" + lt_cv_prog_cc_pic='+Z' + ;; + + irix5* | irix6* | nonstopux*) + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-non_shared' + # PIC (with -KPIC) is the default. + ;; + + cygwin* | mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_cv_prog_cc_pic='-DDLL_EXPORT' + ;; + + newsos6) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + ;; + + osf3* | osf4* | osf5*) + # All OSF/1 code is PIC. + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-non_shared' + ;; + + sco3.2v5*) + lt_cv_prog_cc_pic='-Kpic' + lt_cv_prog_cc_static='-dn' + lt_cv_prog_cc_shlib='-belf' + ;; + + solaris*) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + lt_cv_prog_cc_wl='-Wl,' + ;; + + sunos4*) + lt_cv_prog_cc_pic='-PIC' + lt_cv_prog_cc_static='-Bstatic' + lt_cv_prog_cc_wl='-Qoption ld ' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + if test "x$host_vendor" = xsni; then + lt_cv_prog_cc_wl='-LD' + else + lt_cv_prog_cc_wl='-Wl,' + fi + ;; + + uts4*) + lt_cv_prog_cc_pic='-pic' + lt_cv_prog_cc_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_cv_prog_cc_pic='-Kconform_pic' + lt_cv_prog_cc_static='-Bstatic' + fi + ;; + + *) + lt_cv_prog_cc_can_build_shared=no + ;; + esac + fi +]) +if test -z "$lt_cv_prog_cc_pic"; then + AC_MSG_RESULT([none]) +else + AC_MSG_RESULT([$lt_cv_prog_cc_pic]) + + # Check to make sure the pic_flag actually works. + AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works]) + AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" + AC_TRY_COMPILE([], [], [dnl + case $host_os in + hpux9* | hpux10* | hpux11*) + # On HP-UX, both CC and GCC only warn that PIC is supported... then + # they create non-PIC objects. So, if there were any warnings, we + # assume that PIC is not supported. + if test -s conftest.err; then + lt_cv_prog_cc_pic_works=no + else + lt_cv_prog_cc_pic_works=yes + fi + ;; + *) + lt_cv_prog_cc_pic_works=yes + ;; + esac + ], [dnl + lt_cv_prog_cc_pic_works=no + ]) + CFLAGS="$save_CFLAGS" + ]) + + if test "X$lt_cv_prog_cc_pic_works" = Xno; then + lt_cv_prog_cc_pic= + lt_cv_prog_cc_can_build_shared=no + else + lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" + fi + + AC_MSG_RESULT([$lt_cv_prog_cc_pic_works]) +fi + +# Check for any special shared library compilation flags. +if test -n "$lt_cv_prog_cc_shlib"; then + AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries]) + if echo "$old_CC $old_CFLAGS " | egrep -e "[[ ]]$lt_cv_prog_cc_shlib[[ ]]" >/dev/null; then : + else + AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure]) + lt_cv_prog_cc_can_build_shared=no + fi +fi + +AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works]) +AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl + lt_cv_prog_cc_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" + AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes]) + LDFLAGS="$save_LDFLAGS" +]) + +# Belt *and* braces to stop my trousers falling down: +test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= +AC_MSG_RESULT([$lt_cv_prog_cc_static_works]) + +pic_flag="$lt_cv_prog_cc_pic" +special_shlib_compile_flags="$lt_cv_prog_cc_shlib" +wl="$lt_cv_prog_cc_wl" +link_static_flag="$lt_cv_prog_cc_static" +no_builtin_flag="$lt_cv_prog_cc_no_builtin" +can_build_shared="$lt_cv_prog_cc_can_build_shared" + + +# Check to see if options -o and -c are simultaneously supported by compiler +AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext]) +AC_CACHE_VAL([lt_cv_compiler_c_o], [ +$rm -r conftest 2>/dev/null +mkdir conftest +cd conftest +echo "int some_variable = 0;" > conftest.$ac_ext +mkdir out +# According to Tom Tromey, Ian Lance Taylor reported there are C compilers +# that will create temporary files in the current directory regardless of +# the output directory. Thus, making CWD read-only will cause this test +# to fail, enabling locking or at least warning the user not to do parallel +# builds. +chmod -w . +save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" +compiler_c_o=no +if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s out/conftest.err; then + lt_cv_compiler_c_o=no + else + lt_cv_compiler_c_o=yes + fi +else + # Append any errors to the config.log. + cat out/conftest.err 1>&AC_FD_CC + lt_cv_compiler_c_o=no +fi +CFLAGS="$save_CFLAGS" +chmod u+w . +$rm conftest* out/* +rmdir out +cd .. +rmdir conftest +$rm -r conftest 2>/dev/null +]) +compiler_c_o=$lt_cv_compiler_c_o +AC_MSG_RESULT([$compiler_c_o]) + +if test x"$compiler_c_o" = x"yes"; then + # Check to see if we can write to a .lo + AC_MSG_CHECKING([if $compiler supports -c -o file.lo]) + AC_CACHE_VAL([lt_cv_compiler_o_lo], [ + lt_cv_compiler_o_lo=no + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -c -o conftest.lo" + save_objext="$ac_objext" + ac_objext=lo + AC_TRY_COMPILE([], [int some_variable = 0;], [dnl + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + lt_cv_compiler_o_lo=no + else + lt_cv_compiler_o_lo=yes + fi + ]) + ac_objext="$save_objext" + CFLAGS="$save_CFLAGS" + ]) + compiler_o_lo=$lt_cv_compiler_o_lo + AC_MSG_RESULT([$compiler_o_lo]) +else + compiler_o_lo=no +fi + +# Check to see if we can do hard links to lock some files if needed +hard_links="nottested" +if test "$compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi + +if test "$GCC" = yes; then + # Check to see if options -fno-rtti -fno-exceptions are supported by compiler + AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions]) + echo "int some_variable = 0;" > conftest.$ac_ext + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" + compiler_rtti_exceptions=no + AC_TRY_COMPILE([], [int some_variable = 0;], [dnl + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + compiler_rtti_exceptions=no + else + compiler_rtti_exceptions=yes + fi + ]) + CFLAGS="$save_CFLAGS" + AC_MSG_RESULT([$compiler_rtti_exceptions]) + + if test "$compiler_rtti_exceptions" = "yes"; then + no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' + else + no_builtin_flag=' -fno-builtin' + fi +fi + +# See if the linker supports building shared libraries. +AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries]) + +allow_undefined_flag= +no_undefined_flag= +need_lib_prefix=unknown +need_version=unknown +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +archive_cmds= +archive_expsym_cmds= +old_archive_from_new_cmds= +old_archive_from_expsyms_cmds= +export_dynamic_flag_spec= +whole_archive_flag_spec= +thread_safe_flag_spec= +hardcode_into_libs=no +hardcode_libdir_flag_spec= +hardcode_libdir_separator= +hardcode_direct=no +hardcode_minus_L=no +hardcode_shlibpath_var=unsupported +runpath_var= +link_all_deplibs=unknown +always_export_symbols=no +export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' +# include_expsyms should be a list of space-separated symbols to be *always* +# included in the symbol list +include_expsyms= +# exclude_expsyms can be an egrep regular expression of symbols to exclude +# it will be wrapped by ` (' and `)$', so one must not match beginning or +# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +# as well as any symbol that contains `d'. +exclude_expsyms="_GLOBAL_OFFSET_TABLE_" +# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +# platforms (ab)use it in PIC code, but their linkers get confused if +# the symbol is explicitly referenced. Since portable code cannot +# rely on this symbol name, it's probably fine to never include it in +# preloaded symbol tables. +extract_expsyms_cmds= + +case $host_os in +cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; +openbsd*) + with_gnu_ld=no + ;; +esac + +ld_shlibs=yes +if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX, the GNU linker is very broken + # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. + ld_shlibs=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can use + # them. + ld_shlibs=no + ;; + + beos*) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32*) + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + allow_undefined_flag=unsupported + always_export_symbols=yes + + extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ + sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ + test -f $output_objdir/impgen.exe || (cd $output_objdir && \ + if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ + else $CC -o impgen impgen.c ; fi)~ + $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' + + old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' + + # cygwin and mingw dlls have different entry points and sets of symbols + # to exclude. + # FIXME: what about values for MSVC? + dll_entry=__cygwin_dll_entry@12 + dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ + case $host_os in + mingw*) + # mingw values + dll_entry=_DllMainCRTStartup@12 + dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ + ;; + esac + + # mingw and cygwin differ, and it's simplest to just exclude the union + # of the two symbol sets. + dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 + + # recent cygwin and mingw systems supply a stub DllMain which the user + # can override, but on older systems we have to supply one (in ltdll.c) + if test "x$lt_cv_need_dllmain" = "xyes"; then + ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " + ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ + test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' + else + ltdll_obj= + ltdll_cmds= + fi + + # Extract the symbol export list from an `--export-all' def file, + # then regenerate the def file from the symbol export list, so that + # the compiled dll only exports the symbol export list. + # Be careful not to strip the DATA tag left be newer dlltools. + export_symbols_cmds="$ltdll_cmds"' + $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ + sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' + + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is. + # If DATA tags from a recent dlltool are present, honour them! + archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname-def; + else + echo EXPORTS > $output_objdir/$soname-def; + _lt_hint=1; + cat $export_symbols | while read symbol; do + set dummy \$symbol; + case \[$]# in + 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; + *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;; + esac; + _lt_hint=`expr 1 + \$_lt_hint`; + done; + fi~ + '"$ltdll_cmds"' + $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ + $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ + $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ + $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ + $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris* | sysv5*) + if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = yes; then + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + case $host_os in + cygwin* | mingw* | pw32*) + # dlltool doesn't understand --whole-archive et. al. + whole_archive_flag_spec= + ;; + *) + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + ;; + esac + fi +else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + hardcode_direct=yes + archive_cmds='' + hardcode_libdir_separator=':' + if test "$GCC" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct=yes + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + esac + + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + shared_flag='${wl}-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall can do strange things, so it is better to + # generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' + archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='${wl}-berok' + # This is a bit strange, but is similar to how AIX traditionally builds + # it's shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname' + fi + fi + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + # see comment about different semantics on the GNU ld section + ld_shlibs=no + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + ;; + + darwin* | rhapsody*) + case "$host_os" in + rhapsody* | darwin1.[[012]]) + allow_undefined_flag='-undefined suppress' + ;; + *) # Darwin 1.3 on + allow_undefined_flag='-flat_namespace -undefined suppress' + ;; + esac + # FIXME: Relying on posixy $() will cause problems for + # cross-compilation, but unfortunately the echo tests do not + # yet detect zsh echo's removal of \ escapes. Also zsh mangles + # `"' quotes if we put them in here... so don't! + archive_cmds='$nonopt $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' + # We need to add '_' to the symbols in $export_symbols first + #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' + hardcode_direct=yes + hardcode_shlibpath_var=no + whole_archive_flag_spec='-all_load $convenience' + ;; + + freebsd1*) + ld_shlibs=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9* | hpux10* | hpux11*) + case $host_os in + hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; + *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; + esac + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_minus_L=yes # Not in the search PATH, but as the default + # location of the library. + export_dynamic_flag_spec='${wl}-E' + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + link_all_deplibs=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + openbsd*) + hardcode_direct=yes + hardcode_shlibpath_var=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case "$host_os" in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + + #Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + hardcode_libdir_separator=: + ;; + + sco3.2v5*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + export_dynamic_flag_spec='${wl}-Bexport' + ;; + + solaris*) + # gcc --version < 3.0 without binutils cannot create self contained + # shared libraries reliably, requiring libgcc.a to resolve some of + # the object symbols generated in some cases. Libraries that use + # assert need libgcc.a to resolve __eprintf, for example. Linking + # a copy of libgcc.a into every shared library to guarantee resolving + # such symbols causes other problems: According to Tim Van Holder + # , C++ libraries end up with a separate + # (to the application) exception stack for one thing. + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + case `$CC --version 2>/dev/null` in + [[12]].*) + cat <&2 + +*** Warning: Releases of GCC earlier than version 3.0 cannot reliably +*** create self contained shared libraries on Solaris systems, without +*** introducing a dependency on libgcc.a. Therefore, libtool is disabling +*** -no-undefined support, which will at least allow you to build shared +*** libraries. However, you may find that when you link such libraries +*** into an application without using GCC, you have to manually add +*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to +*** upgrade to a newer version of GCC. Another option is to rebuild your +*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. + +EOF + no_undefined_flag= + ;; + esac + fi + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + if test "x$host_vendor" = xsno; then + archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + else + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + fi + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv5*) + no_undefined_flag=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + hardcode_libdir_flag_spec= + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4.2uw2*) + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=no + hardcode_shlibpath_var=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; + + sysv5uw7* | unixware7*) + no_undefined_flag='${wl}-z ${wl}text' + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac +fi +AC_MSG_RESULT([$ld_shlibs]) +test "$ld_shlibs" = no && can_build_shared=no + +# Check hardcoding attributes. +AC_MSG_CHECKING([how to hardcode library paths into programs]) +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || \ + test -n "$runpath_var"; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$hardcode_shlibpath_var" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +AC_MSG_RESULT([$hardcode_action]) + +striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else + AC_MSG_RESULT([no]) +fi + +reload_cmds='$LD$reload_flag -o $output$reload_objs' +test -z "$deplibs_check_method" && deplibs_check_method=unknown + +# PORTME Fill in your ld.so characteristics +AC_MSG_CHECKING([dynamic linker characteristics]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}.so$major' + ;; + +aix4* | aix5*) + version_type=linux + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can + # not hardcode correct soname into executable. Probably we can + # add versioning support to collect2, so additional links can + # be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}.so$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}.so' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi4*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + export_dynamic_flag_spec=-rdynamic + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + need_version=no + need_lib_prefix=no + case $GCC,$host_os in + yes,cygwin*) + library_names_spec='$libname.dll.a' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' + postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog .libs/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + ;; + yes,mingw*) + library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` + ;; + yes,pw32*) + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' + ;; + *) + library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + # FIXME: Relying on posixy $() will cause problems for + # cross-compilation, but unfortunately the echo tests do not + # yet detect zsh echo's removal of \ escapes. + library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' + soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + *) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + dynamic_linker="$host_os dld.sl" + version_type=sunos + need_lib_prefix=no + need_version=no + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' + soname_spec='${libname}${release}.sl$major' + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) version_type=irix ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux-gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' + soname_spec='${libname}${release}.so$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case "$host_os" in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + ;; + +os2*) + libname_spec='$name' + need_lib_prefix=no + library_names_spec='$libname.dll $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_version=no + need_lib_prefix=no + soname_spec='${libname}${release}.so' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' + soname_spec='$libname.so.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no + +# Report the final consequences. +AC_MSG_CHECKING([if libtool supports shared libraries]) +AC_MSG_RESULT([$can_build_shared]) + +AC_MSG_CHECKING([whether to build shared libraries]) +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + +aix4*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; +esac +AC_MSG_RESULT([$enable_shared]) + +AC_MSG_CHECKING([whether to build static libraries]) +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +AC_MSG_RESULT([$enable_static]) + +if test "$hardcode_action" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +AC_LIBTOOL_DLOPEN_SELF + +if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_MSG_CHECKING([whether -lc should be explicitly linked in]) + AC_CACHE_VAL([lt_cv_archive_cmds_need_lc], + [$rm conftest* + echo 'static int dummy;' > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile); then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_cv_prog_cc_wl + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi]) + AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc]) + ;; + esac +fi +need_lc=${lt_cv_archive_cmds_need_lc-yes} + +# The second clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + : +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + test -f Makefile && make "$ltmain" +fi + +if test -f "$ltmain"; then + trap "$rm \"${ofile}T\"; exit 1" 1 2 15 + $rm -f "${ofile}T" + + echo creating $ofile + + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS \ + AR AR_FLAGS CC LD LN_S NM SHELL \ + reload_flag reload_cmds wl \ + pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ + thread_safe_flag_spec whole_archive_flag_spec libname_spec \ + library_names_spec soname_spec \ + RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ + old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ + postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ + old_striplib striplib file_magic_cmd export_symbols_cmds \ + deplibs_check_method allow_undefined_flag no_undefined_flag \ + finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ + global_symbol_to_c_name_address \ + hardcode_libdir_flag_spec hardcode_libdir_separator \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do + + case $var in + reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ + extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + cat <<__EOF__ > "${ofile}T" +#! $SHELL + +# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996-2000 Free Software Foundation, Inc. +# Originally by Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="sed -e s/^X//" + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + +# ### BEGIN LIBTOOL CONFIG + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$need_lc + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# The default C compiler. +CC=$lt_CC + +# Is the compiler the GNU C compiler? +with_gcc=$GCC + +# The linker used to build libraries. +LD=$lt_LD + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_wl + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_pic_flag +pic_mode=$pic_mode + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_compiler_c_o + +# Can we write directly to a .lo ? +compiler_o_lo=$lt_compiler_o_lo + +# Must we lock files when doing compilation ? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_link_static_flag + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_no_builtin_flag + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path" + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# ### END LIBTOOL CONFIG + +__EOF__ + + case $host_os in + aix3*) + cat <<\EOF >> "${ofile}T" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + esac + + case $host_os in + cygwin* | mingw* | pw32* | os2*) + cat <<'EOF' >> "${ofile}T" + # This is a source program that is used to create dlls on Windows + # Don't remove nor modify the starting and closing comments +# /* ltdll.c starts here */ +# #define WIN32_LEAN_AND_MEAN +# #include +# #undef WIN32_LEAN_AND_MEAN +# #include +# +# #ifndef __CYGWIN__ +# # ifdef __CYGWIN32__ +# # define __CYGWIN__ __CYGWIN32__ +# # endif +# #endif +# +# #ifdef __cplusplus +# extern "C" { +# #endif +# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +# #ifdef __cplusplus +# } +# #endif +# +# #ifdef __CYGWIN__ +# #include +# DECLARE_CYGWIN_DLL( DllMain ); +# #endif +# HINSTANCE __hDllInstance_base; +# +# BOOL APIENTRY +# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +# { +# __hDllInstance_base = hInst; +# return TRUE; +# } +# /* ltdll.c ends here */ + # This is a source program that is used to create import libraries + # on Windows for dlls which lack them. Don't remove nor modify the + # starting and closing comments +# /* impgen.c starts here */ +# /* Copyright (C) 1999-2000 Free Software Foundation, Inc. +# +# This file is part of GNU libtool. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# */ +# +# #include /* for printf() */ +# #include /* for open(), lseek(), read() */ +# #include /* for O_RDONLY, O_BINARY */ +# #include /* for strdup() */ +# +# /* O_BINARY isn't required (or even defined sometimes) under Unix */ +# #ifndef O_BINARY +# #define O_BINARY 0 +# #endif +# +# static unsigned int +# pe_get16 (fd, offset) +# int fd; +# int offset; +# { +# unsigned char b[2]; +# lseek (fd, offset, SEEK_SET); +# read (fd, b, 2); +# return b[0] + (b[1]<<8); +# } +# +# static unsigned int +# pe_get32 (fd, offset) +# int fd; +# int offset; +# { +# unsigned char b[4]; +# lseek (fd, offset, SEEK_SET); +# read (fd, b, 4); +# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +# } +# +# static unsigned int +# pe_as32 (ptr) +# void *ptr; +# { +# unsigned char *b = ptr; +# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +# } +# +# int +# main (argc, argv) +# int argc; +# char *argv[]; +# { +# int dll; +# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; +# unsigned long export_rva, export_size, nsections, secptr, expptr; +# unsigned long name_rvas, nexp; +# unsigned char *expdata, *erva; +# char *filename, *dll_name; +# +# filename = argv[1]; +# +# dll = open(filename, O_RDONLY|O_BINARY); +# if (dll < 1) +# return 1; +# +# dll_name = filename; +# +# for (i=0; filename[i]; i++) +# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') +# dll_name = filename + i +1; +# +# pe_header_offset = pe_get32 (dll, 0x3c); +# opthdr_ofs = pe_header_offset + 4 + 20; +# num_entries = pe_get32 (dll, opthdr_ofs + 92); +# +# if (num_entries < 1) /* no exports */ +# return 1; +# +# export_rva = pe_get32 (dll, opthdr_ofs + 96); +# export_size = pe_get32 (dll, opthdr_ofs + 100); +# nsections = pe_get16 (dll, pe_header_offset + 4 +2); +# secptr = (pe_header_offset + 4 + 20 + +# pe_get16 (dll, pe_header_offset + 4 + 16)); +# +# expptr = 0; +# for (i = 0; i < nsections; i++) +# { +# char sname[8]; +# unsigned long secptr1 = secptr + 40 * i; +# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); +# unsigned long vsize = pe_get32 (dll, secptr1 + 16); +# unsigned long fptr = pe_get32 (dll, secptr1 + 20); +# lseek(dll, secptr1, SEEK_SET); +# read(dll, sname, 8); +# if (vaddr <= export_rva && vaddr+vsize > export_rva) +# { +# expptr = fptr + (export_rva - vaddr); +# if (export_rva + export_size > vaddr + vsize) +# export_size = vsize - (export_rva - vaddr); +# break; +# } +# } +# +# expdata = (unsigned char*)malloc(export_size); +# lseek (dll, expptr, SEEK_SET); +# read (dll, expdata, export_size); +# erva = expdata - export_rva; +# +# nexp = pe_as32 (expdata+24); +# name_rvas = pe_as32 (expdata+32); +# +# printf ("EXPORTS\n"); +# for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) + + mv -f "${ofile}T" "$ofile" || \ + (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") + chmod +x "$ofile" +fi + +])# _LT_AC_LTCONFIG_HACK + # AC_LIBTOOL_DLOPEN - enable checks for dlopen support -AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) +AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) # AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's -AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) +AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) # AC_ENABLE_SHARED - implement the --enable-shared flag # Usage: AC_ENABLE_SHARED[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. -AC_DEFUN(AC_ENABLE_SHARED, [dnl -define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +AC_DEFUN([AC_ENABLE_SHARED], +[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(shared, changequote(<<, >>)dnl << --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} -case "$enableval" in +case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) @@ -395,21 +3184,22 @@ enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl ]) # AC_DISABLE_SHARED - set the default shared flag to --disable-shared -AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_DEFUN([AC_DISABLE_SHARED], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_SHARED(no)]) # AC_ENABLE_STATIC - implement the --enable-static flag # Usage: AC_ENABLE_STATIC[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. -AC_DEFUN(AC_ENABLE_STATIC, [dnl -define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +AC_DEFUN([AC_ENABLE_STATIC], +[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(static, changequote(<<, >>)dnl << --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} -case "$enableval" in +case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) @@ -428,7 +3218,8 @@ enable_static=AC_ENABLE_STATIC_DEFAULT)dnl ]) # AC_DISABLE_STATIC - set the default static flag to --disable-static -AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_DEFUN([AC_DISABLE_STATIC], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_STATIC(no)]) @@ -436,14 +3227,14 @@ AC_ENABLE_STATIC(no)]) # Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. -AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl -define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +AC_DEFUN([AC_ENABLE_FAST_INSTALL], +[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(fast-install, changequote(<<, >>)dnl << --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} -case "$enableval" in +case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) @@ -461,29 +3252,120 @@ esac], enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl ]) -# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install -AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install +AC_DEFUN([AC_DISABLE_FAST_INSTALL], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_FAST_INSTALL(no)]) +# AC_LIBTOOL_PICMODE - implement the --with-pic flag +# Usage: AC_LIBTOOL_PICMODE[(MODE)] +# Where MODE is either `yes' or `no'. If omitted, it defaults to +# `both'. +AC_DEFUN([AC_LIBTOOL_PICMODE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +pic_mode=ifelse($#,1,$1,default)]) + + +# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library +AC_DEFUN([AC_PATH_TOOL_PREFIX], +[AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in + /*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; + ?:/*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. + ;; + *) + ac_save_MAGIC_CMD="$MAGIC_CMD" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="ifelse([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + egrep "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$ac_save_ifs" + MAGIC_CMD="$ac_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +]) + + +# AC_PATH_MAGIC - find a file program which can recognise a shared library +AC_DEFUN([AC_PATH_MAGIC], +[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl +AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH) + else + MAGIC_CMD=: + fi +fi +]) + + # AC_PROG_LD - find the path to the GNU or non-GNU linker -AC_DEFUN(AC_PROG_LD, +AC_DEFUN([AC_PROG_LD], [AC_ARG_WITH(gnu-ld, [ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl ac_prog=ld -if test "$ac_cv_prog_gcc" = yes; then +if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) - ac_prog=`($CC -print-prog-name=ld) 2>&5` - case "$ac_prog" in + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in # Accept absolute paths. -changequote(,)dnl - [\\/]* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' -changequote([,])dnl + [[\\/]]* | [[A-Za-z]]:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do @@ -505,17 +3387,17 @@ elif test "$with_gnu_ld" = yes; then else AC_MSG_CHECKING([for non-GNU ld]) fi -AC_CACHE_VAL(ac_cv_path_LD, +AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - ac_cv_path_LD="$ac_dir/$ac_prog" + lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. - if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break @@ -524,9 +3406,9 @@ AC_CACHE_VAL(ac_cv_path_LD, done IFS="$ac_save_ifs" else - ac_cv_path_LD="$LD" # Let the user override the test with a path. + lt_cv_path_LD="$LD" # Let the user override the test with a path. fi]) -LD="$ac_cv_path_LD" +LD="$lt_cv_path_LD" if test -n "$LD"; then AC_MSG_RESULT($LD) else @@ -536,56 +3418,246 @@ test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) AC_PROG_LD_GNU ]) -AC_DEFUN(AC_PROG_LD_GNU, -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, +# AC_PROG_LD_GNU - +AC_DEFUN([AC_PROG_LD_GNU], +[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then - ac_cv_prog_gnu_ld=yes + lt_cv_prog_gnu_ld=yes else - ac_cv_prog_gnu_ld=no + lt_cv_prog_gnu_ld=no fi]) +with_gnu_ld=$lt_cv_prog_gnu_ld ]) +# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker +# -- PORTME Some linkers may need a different reload flag. +AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], +[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag, +[lt_cv_ld_reload_flag='-r']) +reload_flag=$lt_cv_ld_reload_flag +test -n "$reload_flag" && reload_flag=" $reload_flag" +]) + +# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies +# -- PORTME fill in with the dynamic library characteristics +AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], +[AC_CACHE_CHECK([how to recognise dependant libraries], +lt_cv_deplibs_check_method, +[lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given egrep regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix4* | aix5*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi4*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin* | mingw* | pw32*) + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' + lt_cv_file_magic_cmd='/usr/bin/file -L' + case "$host_os" in + rhapsody* | darwin1.[[012]]) + lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` + ;; + *) # Darwin 1.3 on + lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' + ;; + esac + ;; + +freebsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20*|hpux11*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + irix5* | nonstopux*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" + ;; + *) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" + ;; + esac + lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux-gnu*) + lt_cv_deplibs_check_method=pass_all + lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +openbsd*) + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' + else + lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' + fi + ;; + +osf3* | osf4* | osf5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' + lt_cv_file_magic_test_file=/shlib/libc.so + lt_cv_deplibs_check_method=pass_all + ;; + +sco3.2v5*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + lt_cv_file_magic_test_file=/lib/libc.so + ;; + +sysv5uw[[78]]* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + esac + ;; +esac +]) +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +]) + + # AC_PROG_NM - find the path to a BSD-compatible name lister -AC_DEFUN(AC_PROG_NM, -[AC_MSG_CHECKING([for BSD-compatible nm]) -AC_CACHE_VAL(ac_cv_path_NM, +AC_DEFUN([AC_PROG_NM], +[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl +AC_MSG_CHECKING([for BSD-compatible nm]) +AC_CACHE_VAL(lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. - ac_cv_path_NM="$NM" + lt_cv_path_NM="$NM" else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then + tmp_nm=$ac_dir/${ac_tool_prefix}nm + if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" + # Tru64's nm complains that /dev/null is an invalid object file + if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then + lt_cv_path_NM="$tmp_nm -B" break - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" + elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + lt_cv_path_NM="$tmp_nm -p" break else - ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags fi fi done IFS="$ac_save_ifs" - test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi]) -NM="$ac_cv_path_NM" +NM="$lt_cv_path_NM" AC_MSG_RESULT([$NM]) ]) # AC_CHECK_LIBM - check for math library -AC_DEFUN(AC_CHECK_LIBM, +AC_DEFUN([AC_CHECK_LIBM], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= -case "$lt_target" in -*-*-beos* | *-*-cygwin*) +case $host in +*-*-beos* | *-*-cygwin* | *-*-pw32*) # These system don't have libm ;; *-ncr-sysv4.3*) @@ -599,37 +3671,41 @@ esac ]) # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl convenience library and INCLTDL to the include flags for +# the libltdl convenience library and LTDLINCL to the include flags for # the libltdl header and adds --enable-ltdl-convenience to the -# configure arguments. Note that LIBLTDL and INCLTDL are not +# configure arguments. Note that LIBLTDL and LTDLINCL are not # AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not # provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed -# with '${top_builddir}/' and INCLTDL will be prefixed with +# with '${top_builddir}/' and LTDLINCL will be prefixed with # '${top_srcdir}/' (note the single quotes!). If your package is not # flat and you're not using automake, define top_builddir and # top_srcdir appropriately in the Makefiles. -AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case "$enable_ltdl_convenience" in +AC_DEFUN([AC_LIBLTDL_CONVENIENCE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + case $enable_ltdl_convenience in no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; "") enable_ltdl_convenience=yes ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; esac LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" ]) # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl installable library and INCLTDL to the include flags for +# the libltdl installable library and LTDLINCL to the include flags for # the libltdl header and adds --enable-ltdl-install to the configure -# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is +# arguments. Note that LIBLTDL and LTDLINCL are not AC_SUBSTed, nor is # AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed # libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will -# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed +# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed # with '${top_srcdir}/' (note the single quotes!). If your package is # not flat and you're not using automake, define top_builddir and # top_srcdir appropriately in the Makefiles. # In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_DEFUN([AC_LIBLTDL_INSTALLABLE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_CHECK_LIB(ltdl, main, [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], [if test x"$enable_ltdl_install" = xno; then @@ -641,25 +3717,45 @@ AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl if test x"$enable_ltdl_install" = x"yes"; then ac_configure_args="$ac_configure_args --enable-ltdl-install" LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) else ac_configure_args="$ac_configure_args --enable-ltdl-install=no" LIBLTDL="-lltdl" - INCLTDL= + LTDLINCL= fi + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" ]) -dnl old names -AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl -AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl -AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl -AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl -AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl -AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl -AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl +# old names +AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) +AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) +AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) +AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) +AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) -dnl This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL])dnl +# This is just to silence aclocal about the macro not being used +ifelse([AC_DISABLE_FAST_INSTALL]) + +#serial 1 +# This test replaces the one in autoconf. +# Currently this macro should have the same name as the autoconf macro +# because gettext's gettext.m4 (distributed in the automake package) +# still uses it. Otherwise, the use in gettext.m4 makes autoheader +# give these diagnostics: +# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX +# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX + +undefine([AC_ISC_POSIX]) + +AC_DEFUN([AC_ISC_POSIX], + [ + dnl This test replaces the obsolescent AC_ISC_POSIX kludge. + AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"]) + ] +) # serial 1 @@ -749,23 +3845,3 @@ case "x$am_cv_prog_cc_stdc" in esac ]) - - -#serial 1 -# This test replaces the one in autoconf. -# Currently this macro should have the same name as the autoconf macro -# because gettext's gettext.m4 (distributed in the automake package) -# still uses it. Otherwise, the use in gettext.m4 makes autoheader -# give these diagnostics: -# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX -# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX - -undefine([AC_ISC_POSIX]) - -AC_DEFUN([AC_ISC_POSIX], - [ - dnl This test replaces the obsolescent AC_ISC_POSIX kludge. - AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"]) - ] -) - diff --git a/configure b/configure index eed6b7a17..d18bc695e 100755 --- a/configure +++ b/configure @@ -27,8 +27,169 @@ ac_help="$ac_help --enable-shared[=PKGS] build shared libraries [default=yes]" ac_help="$ac_help --enable-fast-install[=PKGS] optimize for fast installation [default=yes]" + +# Find the correct PATH separator. Usually this is `:', but +# DJGPP uses `;' like DOS. +if test "X${PATH_SEPARATOR+set}" != Xset; then + UNAME=${UNAME-`uname 2>/dev/null`} + case X$UNAME in + *-DOS) lt_cv_sys_path_separator=';' ;; + *) lt_cv_sys_path_separator=':' ;; + esac + PATH_SEPARATOR=$lt_cv_sys_path_separator +fi + + +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` + ;; +esac + +echo=${ECHO-echo} +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "$0" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL $0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL $0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "$0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" +fi + + ac_help="$ac_help --disable-libtool-lock avoid locking (might break parallel builds)" +ac_help="$ac_help + --with-pic try to use only PIC/non-PIC objects [default=use both]" ac_help="$ac_help --enable-pnm-backend enable the pnm backend for testing frontends. Warning: This will be a security risk if used together with @@ -623,7 +784,7 @@ EOF # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:627: checking for $ac_word" >&5 +echo "configure:788: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -653,7 +814,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:657: checking for $ac_word" >&5 +echo "configure:818: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -704,7 +865,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:708: checking for $ac_word" >&5 +echo "configure:869: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -736,7 +897,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:740: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:901: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -747,12 +908,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 751 "configure" +#line 912 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:917: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -778,12 +939,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:782: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:943: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:787: checking whether we are using GNU C" >&5 +echo "configure:948: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -792,7 +953,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:796: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:957: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -811,7 +972,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:815: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:976: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -868,7 +1029,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:872: checking host system type" >&5 +echo "configure:1033: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -889,7 +1050,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:893: checking build system type" >&5 +echo "configure:1054: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -906,6 +1067,17 @@ build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$build" 1>&6 +# Find the correct PATH separator. Usually this is `:', but +# DJGPP uses `;' like DOS. +if test "X${PATH_SEPARATOR+set}" != Xset; then + UNAME=${UNAME-`uname 2>/dev/null`} + case X$UNAME in + *-DOS) lt_cv_sys_path_separator=';' ;; + *) lt_cv_sys_path_separator=':' ;; + esac + PATH_SEPARATOR=$lt_cv_sys_path_separator +fi + # Check whether --with-gnu-ld or --without-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then withval="$with_gnu_ld" @@ -915,12 +1087,18 @@ else fi ac_prog=ld -if test "$ac_cv_prog_gcc" = yes; then +if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6 -echo "configure:922: checking for ld used by GCC" >&5 - ac_prog=`($CC -print-prog-name=ld) 2>&5` - case "$ac_prog" in +echo "configure:1094: checking for ld used by GCC" >&5 + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in # Accept absolute paths. [\\/]* | [A-Za-z]:[\\/]*) re_direlt='/[^/][^/]*/\.\./' @@ -942,24 +1120,24 @@ echo "configure:922: checking for ld used by GCC" >&5 esac elif test "$with_gnu_ld" = yes; then echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 -echo "configure:946: checking for GNU ld" >&5 +echo "configure:1124: checking for GNU ld" >&5 else echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 -echo "configure:949: checking for non-GNU ld" >&5 +echo "configure:1127: checking for non-GNU ld" >&5 fi -if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then +if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - ac_cv_path_LD="$ac_dir/$ac_prog" + lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. - if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break @@ -968,11 +1146,11 @@ else done IFS="$ac_save_ifs" else - ac_cv_path_LD="$LD" # Let the user override the test with a path. + lt_cv_path_LD="$LD" # Let the user override the test with a path. fi fi -LD="$ac_cv_path_LD" +LD="$lt_cv_path_LD" if test -n "$LD"; then echo "$ac_t""$LD" 1>&6 else @@ -980,19 +1158,20 @@ else fi test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6 -echo "configure:984: checking if the linker ($LD) is GNU ld" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then +echo "configure:1162: checking if the linker ($LD) is GNU ld" >&5 +if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then - ac_cv_prog_gnu_ld=yes + lt_cv_prog_gnu_ld=yes else - ac_cv_prog_gnu_ld=no + lt_cv_prog_gnu_ld=no fi fi -echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6 +echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6 +with_gnu_ld=$lt_cv_prog_gnu_ld # Find a good install program. We prefer a C program (faster), @@ -1007,7 +1186,7 @@ echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1011: checking for a BSD compatible install" >&5 +echo "configure:1190: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1060,7 +1239,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:1064: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:1243: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1087,7 +1266,7 @@ else fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1091: checking how to run the C preprocessor" >&5 +echo "configure:1270: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -1102,13 +1281,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1112: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1291: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1119,13 +1298,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1129: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1308: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1136,13 +1315,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1146: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1325: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1168,13 +1347,13 @@ echo "$ac_t""$CPP" 1>&6 if test $ac_cv_prog_gcc = yes; then echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6 -echo "configure:1172: checking whether ${CC-cc} needs -traditional" >&5 +echo "configure:1351: checking whether ${CC-cc} needs -traditional" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_pattern="Autoconf.*'x'" cat > conftest.$ac_ext < Autoconf TIOCGETP @@ -1192,7 +1371,7 @@ rm -f conftest* if test $ac_cv_prog_gcc_traditional = no; then cat > conftest.$ac_ext < Autoconf TCGETA @@ -1214,9 +1393,9 @@ echo "$ac_t""$ac_cv_prog_gcc_traditional" 1>&6 fi echo $ac_n "checking for AIX""... $ac_c" 1>&6 -echo "configure:1218: checking for AIX" >&5 +echo "configure:1397: checking for AIX" >&5 cat > conftest.$ac_ext <&6 -echo "configure:1243: checking for minix/config.h" >&5 +echo "configure:1422: checking for minix/config.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1253: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1432: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1288,7 +1467,7 @@ fi echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6 -echo "configure:1292: checking for strerror in -lcposix" >&5 +echo "configure:1471: checking for strerror in -lcposix" >&5 ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1296,7 +1475,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lcposix $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1490: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -1333,7 +1512,7 @@ fi echo $ac_n "checking for ${CC-cc} option to accept ANSI C""... $ac_c" 1>&6 -echo "configure:1337: checking for ${CC-cc} option to accept ANSI C" >&5 +echo "configure:1516: checking for ${CC-cc} option to accept ANSI C" >&5 if eval "test \"`echo '$''{'am_cv_prog_cc_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1349,7 +1528,7 @@ for ac_arg in "" -qlanglvl=ansi -std1 "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__ do CC="$ac_save_CC $ac_arg" cat > conftest.$ac_ext < #include @@ -1386,7 +1565,7 @@ return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } EOF -if { (eval echo configure:1390: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1569: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* am_cv_prog_cc_stdc="$ac_arg"; break else @@ -1433,17 +1612,17 @@ if test "${ac_cv_prog_gcc}" = "yes"; then ANSI_FLAG=-ansi ac_safe=`echo "os2.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for os2.h""... $ac_c" 1>&6 -echo "configure:1437: checking for os2.h" >&5 +echo "configure:1616: checking for os2.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1447: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1626: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1535,13 +1714,19 @@ fi fi # ac_cv_prog_gcc echo using CFLAGS=${CFLAGS} +case "${host_os}" in + aix*) #enable .so libraries, disable archives + LDFLAGS="$LDFLAGS -Wl,-brtl" + ;; +esac + echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:1540: checking for ANSI C header files" >&5 +echo "configure:1725: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -1549,7 +1734,7 @@ else #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1553: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1738: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1566,7 +1751,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -1584,7 +1769,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -1605,7 +1790,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -1616,7 +1801,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:1620: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1805: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -1650,17 +1835,17 @@ for ac_hdr in fcntl.h unistd.h libc.h sys/dsreq.h sys/select.h \ do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1654: checking for $ac_hdr" >&5 +echo "configure:1839: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1664: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1849: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1688,12 +1873,12 @@ done echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:1692: checking for working const" >&5 +echo "configure:1877: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1931: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -1763,21 +1948,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:1767: checking for inline" >&5 +echo "configure:1952: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1966: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1803,12 +1988,12 @@ EOF esac echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:1807: checking return type of signal handlers" >&5 +echo "configure:1992: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -1825,7 +2010,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:1829: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2014: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -1844,12 +2029,12 @@ EOF echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1848: checking for size_t" >&5 +echo "configure:2033: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -1877,12 +2062,12 @@ EOF fi echo $ac_n "checking for pid_t""... $ac_c" 1>&6 -echo "configure:1881: checking for pid_t" >&5 +echo "configure:2066: checking for pid_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -1910,12 +2095,12 @@ EOF fi echo $ac_n "checking for ssize_t""... $ac_c" 1>&6 -echo "configure:1914: checking for ssize_t" >&5 +echo "configure:2099: checking for ssize_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -1944,9 +2129,9 @@ fi if test "$ac_cv_header_sys_bitypes_h" = "yes" ; then echo $ac_n "checking for u_int8_t only in sys/bitypes.h""... $ac_c" 1>&6 -echo "configure:1948: checking for u_int8_t only in sys/bitypes.h" >&5 +echo "configure:2133: checking for u_int8_t only in sys/bitypes.h" >&5 cat > conftest.$ac_ext <&5 | else rm -rf conftest* cat > conftest.$ac_ext < EOF @@ -1987,12 +2172,12 @@ rm -f conftest* fi echo $ac_n "checking for u_int8_t""... $ac_c" 1>&6 -echo "configure:1991: checking for u_int8_t" >&5 +echo "configure:2176: checking for u_int8_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_u_int8_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -2020,12 +2205,12 @@ EOF fi echo $ac_n "checking for u_int16_t""... $ac_c" 1>&6 -echo "configure:2024: checking for u_int16_t" >&5 +echo "configure:2209: checking for u_int16_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_u_int16_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -2053,12 +2238,12 @@ EOF fi echo $ac_n "checking for u_int32_t""... $ac_c" 1>&6 -echo "configure:2057: checking for u_int32_t" >&5 +echo "configure:2242: checking for u_int32_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_u_int32_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -2086,12 +2271,12 @@ EOF fi echo $ac_n "checking for u_char""... $ac_c" 1>&6 -echo "configure:2090: checking for u_char" >&5 +echo "configure:2275: checking for u_char" >&5 if eval "test \"`echo '$''{'ac_cv_type_u_char'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -2119,12 +2304,12 @@ EOF fi echo $ac_n "checking for u_int""... $ac_c" 1>&6 -echo "configure:2123: checking for u_int" >&5 +echo "configure:2308: checking for u_int" >&5 if eval "test \"`echo '$''{'ac_cv_type_u_int'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -2152,12 +2337,12 @@ EOF fi echo $ac_n "checking for u_long""... $ac_c" 1>&6 -echo "configure:2156: checking for u_long" >&5 +echo "configure:2341: checking for u_long" >&5 if eval "test \"`echo '$''{'ac_cv_type_u_long'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -2187,9 +2372,9 @@ fi echo $ac_n "checking for struct flock in fcntl.h""... $ac_c" 1>&6 -echo "configure:2191: checking for struct flock in fcntl.h" >&5 +echo "configure:2376: checking for struct flock in fcntl.h" >&5 cat > conftest.$ac_ext < EOF @@ -2212,7 +2397,7 @@ if test "$ac_cv_header_sys_scsiio_h" = "yes" \ -a "$ac_cv_header_scsi_h" = "yes"; then cat > conftest.$ac_ext < @@ -2222,7 +2407,7 @@ int main() { scsireq_t req ; return 0; } EOF -if { (eval echo configure:2226: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2411: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then : else echo "configure: failed program was:" >&5 @@ -2237,9 +2422,9 @@ rm -f conftest* fi echo $ac_n "checking for socklen_t in ""... $ac_c" 1>&6 -echo "configure:2241: checking for socklen_t in " >&5 +echo "configure:2426: checking for socklen_t in " >&5 cat > conftest.$ac_ext < @@ -2248,7 +2433,7 @@ int main() { socklen_t len ; return 0; } EOF -if { (eval echo configure:2252: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2437: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* echo "$ac_t""yes" 1>&6 else @@ -2263,9 +2448,9 @@ fi rm -f conftest* echo $ac_n "checking for union semun in ""... $ac_c" 1>&6 -echo "configure:2267: checking for union semun in " >&5 +echo "configure:2452: checking for union semun in " >&5 cat > conftest.$ac_ext < @@ -2276,7 +2461,7 @@ int main() { union semun test_semun ; return 0; } EOF -if { (eval echo configure:2280: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2465: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF @@ -2292,9 +2477,9 @@ fi rm -f conftest* echo $ac_n "checking for sg_header.target_status in ""... $ac_c" 1>&6 -echo "configure:2296: checking for sg_header.target_status in " >&5 +echo "configure:2481: checking for sg_header.target_status in " >&5 cat > conftest.$ac_ext < @@ -2308,7 +2493,7 @@ return 0; ; return 0; } EOF -if { (eval echo configure:2312: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2497: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF @@ -2326,17 +2511,17 @@ rm -f conftest* ac_safe=`echo "linux/videodev.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/videodev.h""... $ac_c" 1>&6 -echo "configure:2330: checking for linux/videodev.h" >&5 +echo "configure:2515: checking for linux/videodev.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2340: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2525: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2360,12 +2545,12 @@ fi if test "${ac_cv_header_linux_videodev_h}" = "yes" then echo $ac_n "checking Video4Linux version 1 or 2""... $ac_c" 1>&6 -echo "configure:2364: checking Video4Linux version 1 or 2" >&5 +echo "configure:2549: checking Video4Linux version 1 or 2" >&5 if eval "test \"`echo '$''{'sane_v4l_version'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #ifdef V4L2_MAJOR_VERSION @@ -2395,17 +2580,17 @@ if test "${enable_dynamic}" != "no"; then do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2399: checking for $ac_hdr" >&5 +echo "configure:2584: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2409: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2594: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2426,7 +2611,7 @@ if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then #define $ac_tr_hdr 1 EOF echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6 -echo "configure:2430: checking for dlopen in -ldl" >&5 +echo "configure:2615: checking for dlopen in -ldl" >&5 ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2434,7 +2619,7 @@ else ac_save_LIBS="$LIBS" LIBS="-ldl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2634: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2470,12 +2655,12 @@ fi for ac_func in dlopen do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2474: checking for $ac_func" >&5 +echo "configure:2659: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2687: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2535,17 +2720,17 @@ done do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2539: checking for $ac_hdr" >&5 +echo "configure:2724: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2549: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2734: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2566,7 +2751,7 @@ if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then #define $ac_tr_hdr 1 EOF echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6 -echo "configure:2570: checking for shl_load in -ldld" >&5 +echo "configure:2755: checking for shl_load in -ldld" >&5 ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2574,7 +2759,7 @@ else ac_save_LIBS="$LIBS" LIBS="-ldld $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2774: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2610,12 +2795,12 @@ fi for ac_func in shl_load do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2614: checking for $ac_func" >&5 +echo "configure:2799: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2827: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2673,7 +2858,7 @@ fi echo $ac_n "checking for sqrt in -lm""... $ac_c" 1>&6 -echo "configure:2677: checking for sqrt in -lm" >&5 +echo "configure:2862: checking for sqrt in -lm" >&5 ac_lib_var=`echo m'_'sqrt | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2681,7 +2866,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lm $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2881: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2720,7 +2905,7 @@ else fi echo $ac_n "checking for scsireq_enter in -lscsi""... $ac_c" 1>&6 -echo "configure:2724: checking for scsireq_enter in -lscsi" >&5 +echo "configure:2909: checking for scsireq_enter in -lscsi" >&5 ac_lib_var=`echo scsi'_'scsireq_enter | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2728,7 +2913,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lscsi $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2928: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2767,7 +2952,7 @@ else fi # FreeBSD needs this echo $ac_n "checking for cam_open_device in -lcam""... $ac_c" 1>&6 -echo "configure:2771: checking for cam_open_device in -lcam" >&5 +echo "configure:2956: checking for cam_open_device in -lcam" >&5 ac_lib_var=`echo cam'_'cam_open_device | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2775,7 +2960,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lcam $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2975: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2814,7 +2999,7 @@ else fi # FreeBSD 3+ needs this echo $ac_n "checking for usb_open in -lusb""... $ac_c" 1>&6 -echo "configure:2818: checking for usb_open in -lusb" >&5 +echo "configure:3003: checking for usb_open in -lusb" >&5 ac_lib_var=`echo usb'_'usb_open | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2822,7 +3007,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lusb $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3022: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2863,7 +3048,7 @@ fi echo $ac_n "checking for jpeg_start_decompress in -ljpeg""... $ac_c" 1>&6 -echo "configure:2867: checking for jpeg_start_decompress in -ljpeg" >&5 +echo "configure:3052: checking for jpeg_start_decompress in -ljpeg" >&5 ac_lib_var=`echo jpeg'_'jpeg_start_decompress | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2871,7 +3056,7 @@ else ac_save_LIBS="$LIBS" LIBS="-ljpeg $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3071: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2900,17 +3085,17 @@ if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then ac_safe=`echo "jconfig.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for jconfig.h""... $ac_c" 1>&6 -echo "configure:2904: checking for jconfig.h" >&5 +echo "configure:3089: checking for jconfig.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2914: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3099: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2928,9 +3113,9 @@ if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for jpeglib - version >= 61 (6a)""... $ac_c" 1>&6 -echo "configure:2932: checking for jpeglib - version >= 61 (6a)" >&5 +echo "configure:3117: checking for jpeglib - version >= 61 (6a)" >&5 cat > conftest.$ac_ext < @@ -2980,7 +3165,7 @@ if test "${with_gphoto2+set}" = set; then # Extract the first word of "${ac_tool_prefix}gphoto2-config", so it can be a program name with args. set dummy ${ac_tool_prefix}gphoto2-config; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2984: checking for $ac_word" >&5 +echo "configure:3169: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_HAVE_GPHOTO2'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3012,7 +3197,7 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "gphoto2-config", so it can be a program name with args. set dummy gphoto2-config; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3016: checking for $ac_word" >&5 +echo "configure:3201: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_HAVE_GPHOTO2'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3091,7 +3276,7 @@ fi if test "`uname`" != "IRIX" -a "`uname`" != "IRIX64"; then echo $ac_n "checking for gethostbyaddr in -lnsl""... $ac_c" 1>&6 -echo "configure:3095: checking for gethostbyaddr in -lnsl" >&5 +echo "configure:3280: checking for gethostbyaddr in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyaddr | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3099,7 +3284,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3299: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3138,7 +3323,7 @@ else fi echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6 -echo "configure:3142: checking for socket in -lsocket" >&5 +echo "configure:3327: checking for socket in -lsocket" >&5 ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3146,7 +3331,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3346: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3185,7 +3370,7 @@ else fi echo $ac_n "checking for syslog in -lsyslog""... $ac_c" 1>&6 -echo "configure:3189: checking for syslog in -lsyslog" >&5 +echo "configure:3374: checking for syslog in -lsyslog" >&5 ac_lib_var=`echo syslog'_'syslog | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3193,7 +3378,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsyslog $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3393: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3257,17 +3442,17 @@ fi do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3261: checking for $ac_hdr" >&5 +echo "configure:3446: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3271: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3456: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3288,7 +3473,7 @@ if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then #define $ac_tr_hdr 1 EOF echo $ac_n "checking for ptalInit in -lptal""... $ac_c" 1>&6 -echo "configure:3292: checking for ptalInit in -lptal" >&5 +echo "configure:3477: checking for ptalInit in -lptal" >&5 ac_lib_var=`echo ptal'_'ptalInit | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3296,7 +3481,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lptal $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3496: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3359,19 +3544,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:3363: checking for working alloca.h" >&5 +echo "configure:3548: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:3375: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3560: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -3392,12 +3577,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:3396: checking for alloca" >&5 +echo "configure:3581: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3614: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -3457,12 +3642,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:3461: checking whether alloca needs Cray hooks" >&5 +echo "configure:3646: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3491: checking for $ac_func" >&5 +echo "configure:3676: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3704: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3542,7 +3727,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:3546: checking stack direction for C alloca" >&5 +echo "configure:3731: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3550,7 +3735,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3758: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -3594,17 +3779,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3598: checking for $ac_hdr" >&5 +echo "configure:3783: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3608: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3793: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3633,12 +3818,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3637: checking for $ac_func" >&5 +echo "configure:3822: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3850: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3686,7 +3871,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:3690: checking for working mmap" >&5 +echo "configure:3875: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3694,7 +3879,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:4023: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -3861,12 +4046,12 @@ for ac_func in atexit inet_addr inet_aton inet_ntoa ioperm mkdir \ cfmakeraw tcsendbreak strcasecmp strncasecmp _portaccess do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3865: checking for $ac_func" >&5 +echo "configure:4050: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4078: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3918,12 +4103,12 @@ for ac_func in getenv inet_ntop inet_pton isfdtype sigprocmask snprintf \ strdup strndup strsep usleep vsyslog do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3922: checking for $ac_func" >&5 +echo "configure:4107: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4135: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3974,7 +4159,7 @@ done echo $ac_n "checking linker parameter to set runtime link path""... $ac_c" 1>&6 -echo "configure:3978: checking linker parameter to set runtime link path" >&5 +echo "configure:4163: checking linker parameter to set runtime link path" >&5 if eval "test \"`echo '$''{'LINKER_RPATH'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3999,7 +4184,7 @@ echo "$ac_t""$LINKER_RPATH" 1>&6 if test "${enable_static+set}" = set; then enableval="$enable_static" p=${PACKAGE-default} -case "$enableval" in +case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) @@ -4018,11 +4203,73 @@ else enable_static=no fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:4208: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:4241: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes # Check whether --enable-shared or --disable-shared was given. if test "${enable_shared+set}" = set; then enableval="$enable_shared" p=${PACKAGE-default} -case "$enableval" in +case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) @@ -4045,7 +4292,7 @@ fi if test "${enable_fast_install+set}" = set; then enableval="$enable_fast_install" p=${PACKAGE-default} -case "$enableval" in +case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) @@ -4064,10 +4311,710 @@ else enable_fast_install=yes fi -# Extract the first word of "ranlib", so it can be a program name with args. +echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6 +echo "configure:4316: checking for $LD option to reload object files" >&5 +if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + lt_cv_ld_reload_flag='-r' +fi + +echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6 +reload_flag=$lt_cv_ld_reload_flag +test -n "$reload_flag" && reload_flag=" $reload_flag" + +echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 +echo "configure:4328: checking for BSD-compatible nm" >&5 +if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do + test -z "$ac_dir" && ac_dir=. + tmp_nm=$ac_dir/${ac_tool_prefix}nm + if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then + lt_cv_path_NM="$tmp_nm -B" + break + elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + lt_cv_path_NM="$tmp_nm -p" + break + else + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + fi + fi + done + IFS="$ac_save_ifs" + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +fi +fi + +NM="$lt_cv_path_NM" +echo "$ac_t""$NM" 1>&6 + +echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 +echo "configure:4366: checking whether ln -s works" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + rm -f conftestdata +if ln -s X conftestdata 2>/dev/null +then + rm -f conftestdata + ac_cv_prog_LN_S="ln -s" +else + ac_cv_prog_LN_S=ln +fi +fi +LN_S="$ac_cv_prog_LN_S" +if test "$ac_cv_prog_LN_S" = "ln -s"; then + echo "$ac_t""yes" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6 +echo "configure:4387: checking how to recognise dependant libraries" >&5 +if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given egrep regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix4* | aix5*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi4*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin* | mingw* | pw32*) + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' + lt_cv_file_magic_cmd='/usr/bin/file -L' + case "$host_os" in + rhapsody* | darwin1.[012]) + lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` + ;; + *) # Darwin 1.3 on + lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' + ;; + esac + ;; + +freebsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20*|hpux11*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + irix5* | nonstopux*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" + ;; + *) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" + ;; + esac + lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux-gnu*) + lt_cv_deplibs_check_method=pass_all + lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +openbsd*) + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' + else + lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' + fi + ;; + +osf3* | osf4* | osf5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' + lt_cv_file_magic_test_file=/shlib/libc.so + lt_cv_deplibs_check_method=pass_all + ;; + +sco3.2v5*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + lt_cv_file_magic_test_file=/lib/libc.so + ;; + +sysv5uw[78]* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + esac + ;; +esac + +fi + +echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6 +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method + +echo $ac_n "checking for object suffix""... $ac_c" 1>&6 +echo "configure:4564: checking for object suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + rm -f conftest* +echo 'int i = 1;' > conftest.$ac_ext +if { (eval echo configure:4570: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + for ac_file in conftest.*; do + case $ac_file in + *.c) ;; + *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;; + esac + done +else + { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; } +fi +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_objext" 1>&6 +OBJEXT=$ac_cv_objext +ac_objext=$ac_cv_objext + + + +echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 +echo "configure:4590: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:4600: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no +fi +fi + +EXEEXT="" +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT + + + + +# Check for command to grab the raw symbol name followed by C symbol from nm. +echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6 +echo "configure:4625: checking command to parse $NM output" >&5 +if eval "test \"`echo '$''{'lt_cv_sys_global_symbol_pipe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Transform the above into a raw symbol and a C symbol. +symxfrm='\1 \2\3 \3' + +# Transform an extracted symbol line into a proper C declaration +lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32*) + symcode='[ABCDGISTW]' + ;; +hpux*) # Its linker distinguishes data from code symbols + lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +solaris* | sysv5*) + symcode='[BDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac + +# Handle CRLF in mingw tool chain +opt_cr= +case $host_os in +mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then + symcode='[ABCDGISTW]' +fi + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + # Write the raw and C identifiers. +lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no + rm -f conftest* + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { (eval echo configure:4708: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5; } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if egrep ' nm_test_var$' "$nlist" >/dev/null; then + if egrep ' nm_test_func$' "$nlist" >/dev/null; then + cat < conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' + + cat <> conftest.$ac_ext +#if defined (__STDC__) && __STDC__ +# define lt_ptr void * +#else +# define lt_ptr char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr address; +} +lt_preloaded_symbols[] = +{ +EOF + sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + save_LIBS="$LIBS" + save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$no_builtin_flag" + if { (eval echo configure:4759: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then + pipe_works=yes + fi + LIBS="$save_LIBS" + CFLAGS="$save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -f conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done + +fi + +global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" +if test -z "$lt_cv_sys_global_symbol_pipe"; then + global_symbol_to_cdecl= + global_symbol_to_c_name_address= +else + global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" + global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" +fi +if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; +then + echo "$ac_t""failed" 1>&6 +else + echo "$ac_t""ok" 1>&6 +fi + +for ac_hdr in dlfcn.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:4808: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:4818: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <&6 +fi +done + + + + + +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6 +echo "configure:4853: checking for ${ac_tool_prefix}file" >&5 +if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case $MAGIC_CMD in + /*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; + ?:/*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. + ;; + *) + ac_save_MAGIC_CMD="$MAGIC_CMD" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="/usr/bin:$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + egrep "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$ac_save_ifs" + MAGIC_CMD="$ac_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + echo "$ac_t""$MAGIC_CMD" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + echo $ac_n "checking for file""... $ac_c" 1>&6 +echo "configure:4915: checking for file" >&5 +if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case $MAGIC_CMD in + /*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; + ?:/*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. + ;; + *) + ac_save_MAGIC_CMD="$MAGIC_CMD" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="/usr/bin:$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + egrep "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$ac_save_ifs" + MAGIC_CMD="$ac_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + echo "$ac_t""$MAGIC_CMD" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:4986: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + +if test -z "$ac_cv_prog_RANLIB"; then +if test -n "$ac_tool_prefix"; then + # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4071: checking for $ac_word" >&5 +echo "configure:5018: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4094,100 +5041,98 @@ else echo "$ac_t""no" 1>&6 fi -echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 -echo "configure:4099: checking for BSD-compatible nm" >&5 -if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then +else + RANLIB=":" +fi +fi + +# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:5053: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$NM"; then - # Let the user override the test. - ac_cv_path_NM="$NM" + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" - break - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" - break - else - ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi + if test -f $ac_dir/$ac_word; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + break fi done IFS="$ac_save_ifs" - test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm fi fi - -NM="$ac_cv_path_NM" -echo "$ac_t""$NM" 1>&6 - -echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:4135: checking whether ln -s works" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - rm -f conftestdata -if ln -s X conftestdata 2>/dev/null -then - rm -f conftestdata - ac_cv_prog_LN_S="ln -s" -else - ac_cv_prog_LN_S=ln -fi -fi -LN_S="$ac_cv_prog_LN_S" -if test "$ac_cv_prog_LN_S" = "ln -s"; then - echo "$ac_t""yes" 1>&6 +STRIP="$ac_cv_prog_STRIP" +if test -n "$STRIP"; then + echo "$ac_t""$STRIP" 1>&6 else echo "$ac_t""no" 1>&6 fi -case "$target" in -NONE) lt_target="$host" ;; -*) lt_target="$target" ;; -esac +if test -z "$ac_cv_prog_STRIP"; then +if test -n "$ac_tool_prefix"; then + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:5085: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_STRIP="strip" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":" +fi +fi +STRIP="$ac_cv_prog_STRIP" +if test -n "$STRIP"; then + echo "$ac_t""$STRIP" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi -# Check for any special flags to pass to ltconfig. -# -# the following will cause an existing older ltconfig to fail, so -# we ignore this at the expense of the cache file... Checking this -# will just take longer ... bummer! -#libtool_flags="--cache-file=$cache_file" -# -test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" -test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" -test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" -test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" -test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" +else + STRIP=":" +fi +fi + + +enable_dlopen=no +enable_win32_dll=yes -libtool_flags="$libtool_flags --enable-win32-dll" # Check whether --enable-libtool-lock or --disable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then enableval="$enable_libtool_lock" : fi -test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" -test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. -case "$lt_target" in +case $host in *-*-irix6*) # Find out which ABI we are using. - echo '#line 4189 "configure"' > conftest.$ac_ext - if { (eval echo configure:4190: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - case "`/usr/bin/file conftest.o`" in + echo '#line 5134 "configure"' > conftest.$ac_ext + if { (eval echo configure:5135: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; @@ -4207,19 +5152,27 @@ case "$lt_target" in SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 -echo "configure:4211: checking whether the C compiler needs -belf" >&5 +echo "configure:5156: checking whether the C compiler needs -belf" >&5 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - cat > conftest.$ac_ext < conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5176: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* lt_cv_cc_needs_belf=yes else @@ -4229,6 +5182,13 @@ else lt_cv_cc_needs_belf=no fi rm -f conftest* + ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + fi echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6 @@ -4238,11 +5198,11 @@ echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6 fi ;; -*-*-cygwin* | *-*-mingw*) +*-*-cygwin* | *-*-mingw* | *-*-pw32*) # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ac_tool_prefix}dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4246: checking for $ac_word" >&5 +echo "configure:5206: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4274,7 +5234,7 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4278: checking for $ac_word" >&5 +echo "configure:5238: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4309,7 +5269,7 @@ fi # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. set dummy ${ac_tool_prefix}as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4313: checking for $ac_word" >&5 +echo "configure:5273: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4341,7 +5301,7 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "as", so it can be a program name with args. set dummy as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4345: checking for $ac_word" >&5 +echo "configure:5305: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4376,7 +5336,7 @@ fi # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4380: checking for $ac_word" >&5 +echo "configure:5340: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4408,7 +5368,7 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4412: checking for $ac_word" >&5 +echo "configure:5372: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4440,88 +5400,2904 @@ else fi fi - ;; + # recent cygwin and mingw systems supply a stub DllMain which the user + # can override, but on older systems we have to supply one + echo $ac_n "checking if libtool should supply DllMain function""... $ac_c" 1>&6 +echo "configure:5408: checking if libtool should supply DllMain function" >&5 +if eval "test \"`echo '$''{'lt_cv_need_dllmain'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + lt_cv_need_dllmain=no +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + lt_cv_need_dllmain=yes +fi +rm -f conftest* +fi + +echo "$ac_t""$lt_cv_need_dllmain" 1>&6 + + case $host/$CC in + *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) + # old mingw systems require "-dll" to link a DLL, while more recent ones + # require "-mdll" + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -mdll" + echo $ac_n "checking how to link DLLs""... $ac_c" 1>&6 +echo "configure:5442: checking how to link DLLs" >&5 +if eval "test \"`echo '$''{'lt_cv_cc_dll_switch'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + lt_cv_cc_dll_switch=-mdll +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + lt_cv_cc_dll_switch=-dll +fi +rm -f conftest* +fi + +echo "$ac_t""$lt_cv_cc_dll_switch" 1>&6 + CFLAGS="$SAVE_CFLAGS" ;; + *-*-cygwin* | *-*-pw32*) + # cygwin systems need to pass --dll to the linker, and not link + # crt.o which will require a WinMain@16 definition. + lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; + esac + ;; + esac +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e s/^X//' +sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' -# Save cache, so that ltconfig can load it -cat > confcache <<\EOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. -# -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. -# -EOF -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -(set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" +# Same as above, but do not quote variable references. +double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Constants: +rm="rm -f" + +# Global variables: +default_ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except M$VC, +# which needs '.lib'). +libext=a +ltmain="$ac_aux_dir/ltmain.sh" +ofile="$default_ofile" +with_gnu_ld="$lt_cv_prog_gnu_ld" +need_locks="$enable_libtool_lock" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AS" && AS=as +test -z "$CC" && CC=cc +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LD" && LD=ld +test -z "$LN_S" && LN_S="ln -s" +test -z "$MAGIC_CMD" && MAGIC_CMD=file +test -z "$NM" && NM=nm +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$RANLIB" && RANLIB=: +test -z "$STRIP" && STRIP=: +test -z "$ac_objext" && ac_objext=o + +if test x"$host" != x"$build"; then + ac_tool_prefix=${host_alias}- +else + ac_tool_prefix= +fi + +# Transform linux* to *-*-linux-gnu*, to support old configure scripts. +case $host_os in +linux-gnu*) ;; +linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` +esac + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" ;; *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' + old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" ;; - esac >> confcache -if cmp -s $cache_file confcache; then - : + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +# Allow CC to be a program name with arguments. +set dummy $CC +compiler="$2" + +echo $ac_n "checking for objdir""... $ac_c" 1>&6 +echo "configure:5568: checking for objdir" >&5 +rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + objdir=.libs else - if test -w $cache_file; then - echo "updating cache $cache_file" - cat confcache > $cache_file + # MS-DOS does not allow filenames that begin with a dot. + objdir=_libs +fi +rmdir .libs 2>/dev/null +echo "$ac_t""$objdir" 1>&6 + + +# Check whether --with-pic or --without-pic was given. +if test "${with_pic+set}" = set; then + withval="$with_pic" + pic_mode="$withval" +else + pic_mode=default +fi + +test -z "$pic_mode" && pic_mode=default + +# We assume here that the value for lt_cv_prog_cc_pic will not be cached +# in isolation, and that seeing it set (from the cache) indicates that +# the associated values are set (in the cache) correctly too. +echo $ac_n "checking for $compiler option to produce PIC""... $ac_c" 1>&6 +echo "configure:5595: checking for $compiler option to produce PIC" >&5 +if eval "test \"`echo '$''{'lt_cv_prog_cc_pic'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + lt_cv_prog_cc_pic= + lt_cv_prog_cc_shlib= + lt_cv_prog_cc_wl= + lt_cv_prog_cc_static= + lt_cv_prog_cc_no_builtin= + lt_cv_prog_cc_can_build_shared=$can_build_shared + + if test "$GCC" = yes; then + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-static' + + case $host_os in + aix*) + # Below there is a dirty hack to force normal static linking with -ldl + # The problem is because libdl dynamically linked with both libc and + # libC (AIX C++ library), which obviously doesn't included in libraries + # list by gcc. This cause undefined symbols with -static flags. + # This hack allows C programs to be linked with "-static -ldl", but + # not sure about C++ programs. + lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_cv_prog_cc_pic='-fno-common' + ;; + cygwin* | mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_cv_prog_cc_pic='-DDLL_EXPORT' + ;; + sysv4*MP*) + if test -d /usr/nec; then + lt_cv_prog_cc_pic=-Kconform_pic + fi + ;; + *) + lt_cv_prog_cc_pic='-fPIC' + ;; + esac else - echo "not updating unwritable cache $cache_file" + # PORTME Check for PIC flags for the system compiler. + case $host_os in + aix3* | aix4* | aix5*) + lt_cv_prog_cc_wl='-Wl,' + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_cv_prog_cc_static='-Bstatic' + else + lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + hpux9* | hpux10* | hpux11*) + # Is there a better lt_cv_prog_cc_static that works with the bundled CC? + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" + lt_cv_prog_cc_pic='+Z' + ;; + + irix5* | irix6* | nonstopux*) + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-non_shared' + # PIC (with -KPIC) is the default. + ;; + + cygwin* | mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_cv_prog_cc_pic='-DDLL_EXPORT' + ;; + + newsos6) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + ;; + + osf3* | osf4* | osf5*) + # All OSF/1 code is PIC. + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-non_shared' + ;; + + sco3.2v5*) + lt_cv_prog_cc_pic='-Kpic' + lt_cv_prog_cc_static='-dn' + lt_cv_prog_cc_shlib='-belf' + ;; + + solaris*) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + lt_cv_prog_cc_wl='-Wl,' + ;; + + sunos4*) + lt_cv_prog_cc_pic='-PIC' + lt_cv_prog_cc_static='-Bstatic' + lt_cv_prog_cc_wl='-Qoption ld ' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + if test "x$host_vendor" = xsni; then + lt_cv_prog_cc_wl='-LD' + else + lt_cv_prog_cc_wl='-Wl,' + fi + ;; + + uts4*) + lt_cv_prog_cc_pic='-pic' + lt_cv_prog_cc_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_cv_prog_cc_pic='-Kconform_pic' + lt_cv_prog_cc_static='-Bstatic' + fi + ;; + + *) + lt_cv_prog_cc_can_build_shared=no + ;; + esac + fi + +fi + +if test -z "$lt_cv_prog_cc_pic"; then + echo "$ac_t""none" 1>&6 +else + echo "$ac_t""$lt_cv_prog_cc_pic" 1>&6 + + # Check to make sure the pic_flag actually works. + echo $ac_n "checking if $compiler PIC flag $lt_cv_prog_cc_pic works""... $ac_c" 1>&6 +echo "configure:5747: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5 + if eval "test \"`echo '$''{'lt_cv_prog_cc_pic_works'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + case $host_os in + hpux9* | hpux10* | hpux11*) + # On HP-UX, both CC and GCC only warn that PIC is supported... then + # they create non-PIC objects. So, if there were any warnings, we + # assume that PIC is not supported. + if test -s conftest.err; then + lt_cv_prog_cc_pic_works=no + else + lt_cv_prog_cc_pic_works=yes + fi + ;; + *) + lt_cv_prog_cc_pic_works=yes + ;; + esac + +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + lt_cv_prog_cc_pic_works=no + +fi +rm -f conftest* + CFLAGS="$save_CFLAGS" + +fi + + + if test "X$lt_cv_prog_cc_pic_works" = Xno; then + lt_cv_prog_cc_pic= + lt_cv_prog_cc_can_build_shared=no + else + lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" + fi + + echo "$ac_t""$lt_cv_prog_cc_pic_works" 1>&6 +fi + +# Check for any special shared library compilation flags. +if test -n "$lt_cv_prog_cc_shlib"; then + echo "configure: warning: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" 1>&2 + if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]" >/dev/null; then : + else + echo "configure: warning: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" 1>&2 + lt_cv_prog_cc_can_build_shared=no fi fi -rm -f confcache - -# Actually configure libtool. ac_aux_dir is where install-sh is found. -CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ -LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ -DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ -${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ -|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; } - -# Reload cache, that may have been modified by ltconfig -if test -r "$cache_file"; then - echo "loading cache $cache_file" - . $cache_file +echo $ac_n "checking if $compiler static flag $lt_cv_prog_cc_static works""... $ac_c" 1>&6 +echo "configure:5813: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5 +if eval "test \"`echo '$''{'lt_cv_prog_cc_static_works'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 else - echo "creating cache $cache_file" - > $cache_file + lt_cv_prog_cc_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" + cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + lt_cv_prog_cc_static_works=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 fi +rm -f conftest* + LDFLAGS="$save_LDFLAGS" + +fi + + +# Belt *and* braces to stop my trousers falling down: +test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= +echo "$ac_t""$lt_cv_prog_cc_static_works" 1>&6 + +pic_flag="$lt_cv_prog_cc_pic" +special_shlib_compile_flags="$lt_cv_prog_cc_shlib" +wl="$lt_cv_prog_cc_wl" +link_static_flag="$lt_cv_prog_cc_static" +no_builtin_flag="$lt_cv_prog_cc_no_builtin" +can_build_shared="$lt_cv_prog_cc_can_build_shared" + + +# Check to see if options -o and -c are simultaneously supported by compiler +echo $ac_n "checking if $compiler supports -c -o file.$ac_objext""... $ac_c" 1>&6 +echo "configure:5855: checking if $compiler supports -c -o file.$ac_objext" >&5 +if eval "test \"`echo '$''{'lt_cv_compiler_c_o'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + +$rm -r conftest 2>/dev/null +mkdir conftest +cd conftest +echo "int some_variable = 0;" > conftest.$ac_ext +mkdir out +# According to Tom Tromey, Ian Lance Taylor reported there are C compilers +# that will create temporary files in the current directory regardless of +# the output directory. Thus, making CWD read-only will cause this test +# to fail, enabling locking or at least warning the user not to do parallel +# builds. +chmod -w . +save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" +compiler_c_o=no +if { (eval echo configure:5874: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s out/conftest.err; then + lt_cv_compiler_c_o=no + else + lt_cv_compiler_c_o=yes + fi +else + # Append any errors to the config.log. + cat out/conftest.err 1>&5 + lt_cv_compiler_c_o=no +fi +CFLAGS="$save_CFLAGS" +chmod u+w . +$rm conftest* out/* +rmdir out +cd .. +rmdir conftest +$rm -r conftest 2>/dev/null + +fi + +compiler_c_o=$lt_cv_compiler_c_o +echo "$ac_t""$compiler_c_o" 1>&6 + +if test x"$compiler_c_o" = x"yes"; then + # Check to see if we can write to a .lo + echo $ac_n "checking if $compiler supports -c -o file.lo""... $ac_c" 1>&6 +echo "configure:5903: checking if $compiler supports -c -o file.lo" >&5 + if eval "test \"`echo '$''{'lt_cv_compiler_o_lo'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + + lt_cv_compiler_o_lo=no + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -c -o conftest.lo" + save_objext="$ac_objext" + ac_objext=lo + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + lt_cv_compiler_o_lo=no + else + lt_cv_compiler_o_lo=yes + fi + +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* + ac_objext="$save_objext" + CFLAGS="$save_CFLAGS" + +fi + + compiler_o_lo=$lt_cv_compiler_o_lo + echo "$ac_t""$compiler_o_lo" 1>&6 +else + compiler_o_lo=no +fi + +# Check to see if we can do hard links to lock some files if needed +hard_links="nottested" +if test "$compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + echo $ac_n "checking if we can lock with hard links""... $ac_c" 1>&6 +echo "configure:5952: checking if we can lock with hard links" >&5 + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + echo "$ac_t""$hard_links" 1>&6 + if test "$hard_links" = no; then + echo "configure: warning: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" 1>&2 + need_locks=warn + fi +else + need_locks=no +fi + +if test "$GCC" = yes; then + # Check to see if options -fno-rtti -fno-exceptions are supported by compiler + echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions""... $ac_c" 1>&6 +echo "configure:5971: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 + echo "int some_variable = 0;" > conftest.$ac_ext + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" + compiler_rtti_exceptions=no + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + compiler_rtti_exceptions=no + else + compiler_rtti_exceptions=yes + fi + +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* + CFLAGS="$save_CFLAGS" + echo "$ac_t""$compiler_rtti_exceptions" 1>&6 + + if test "$compiler_rtti_exceptions" = "yes"; then + no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' + else + no_builtin_flag=' -fno-builtin' + fi +fi + +# See if the linker supports building shared libraries. +echo $ac_n "checking whether the linker ($LD) supports shared libraries""... $ac_c" 1>&6 +echo "configure:6011: checking whether the linker ($LD) supports shared libraries" >&5 + +allow_undefined_flag= +no_undefined_flag= +need_lib_prefix=unknown +need_version=unknown +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +archive_cmds= +archive_expsym_cmds= +old_archive_from_new_cmds= +old_archive_from_expsyms_cmds= +export_dynamic_flag_spec= +whole_archive_flag_spec= +thread_safe_flag_spec= +hardcode_into_libs=no +hardcode_libdir_flag_spec= +hardcode_libdir_separator= +hardcode_direct=no +hardcode_minus_L=no +hardcode_shlibpath_var=unsupported +runpath_var= +link_all_deplibs=unknown +always_export_symbols=no +export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' +# include_expsyms should be a list of space-separated symbols to be *always* +# included in the symbol list +include_expsyms= +# exclude_expsyms can be an egrep regular expression of symbols to exclude +# it will be wrapped by ` (' and `)$', so one must not match beginning or +# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +# as well as any symbol that contains `d'. +exclude_expsyms="_GLOBAL_OFFSET_TABLE_" +# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +# platforms (ab)use it in PIC code, but their linkers get confused if +# the symbol is explicitly referenced. Since portable code cannot +# rely on this symbol name, it's probably fine to never include it in +# preloaded symbol tables. +extract_expsyms_cmds= + +case $host_os in +cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; +openbsd*) + with_gnu_ld=no + ;; +esac + +ld_shlibs=yes +if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX, the GNU linker is very broken + # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. + ld_shlibs=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can use + # them. + ld_shlibs=no + ;; + + beos*) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32*) + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + allow_undefined_flag=unsupported + always_export_symbols=yes + + extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ + sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ + test -f $output_objdir/impgen.exe || (cd $output_objdir && \ + if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ + else $CC -o impgen impgen.c ; fi)~ + $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' + + old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' + + # cygwin and mingw dlls have different entry points and sets of symbols + # to exclude. + # FIXME: what about values for MSVC? + dll_entry=__cygwin_dll_entry@12 + dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ + case $host_os in + mingw*) + # mingw values + dll_entry=_DllMainCRTStartup@12 + dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ + ;; + esac + + # mingw and cygwin differ, and it's simplest to just exclude the union + # of the two symbol sets. + dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 + + # recent cygwin and mingw systems supply a stub DllMain which the user + # can override, but on older systems we have to supply one (in ltdll.c) + if test "x$lt_cv_need_dllmain" = "xyes"; then + ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " + ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ + test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' + else + ltdll_obj= + ltdll_cmds= + fi + + # Extract the symbol export list from an `--export-all' def file, + # then regenerate the def file from the symbol export list, so that + # the compiled dll only exports the symbol export list. + # Be careful not to strip the DATA tag left be newer dlltools. + export_symbols_cmds="$ltdll_cmds"' + $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ + sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' + + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is. + # If DATA tags from a recent dlltool are present, honour them! + archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname-def; + else + echo EXPORTS > $output_objdir/$soname-def; + _lt_hint=1; + cat $export_symbols | while read symbol; do + set dummy \$symbol; + case \$# in + 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; + *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;; + esac; + _lt_hint=`expr 1 + \$_lt_hint`; + done; + fi~ + '"$ltdll_cmds"' + $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ + $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ + $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ + $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ + $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris* | sysv5*) + if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = yes; then + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + case $host_os in + cygwin* | mingw* | pw32*) + # dlltool doesn't understand --whole-archive et. al. + whole_archive_flag_spec= + ;; + *) + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + ;; + esac + fi +else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + hardcode_direct=yes + archive_cmds='' + hardcode_libdir_separator=':' + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct=yes + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + esac + + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + shared_flag='${wl}-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall can do strange things, so it is better to + # generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' + archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='${wl}-berok' + # This is a bit strange, but is similar to how AIX traditionally builds + # it's shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname' + fi + fi + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + # see comment about different semantics on the GNU ld section + ld_shlibs=no + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + ;; + + darwin* | rhapsody*) + case "$host_os" in + rhapsody* | darwin1.[012]) + allow_undefined_flag='-undefined suppress' + ;; + *) # Darwin 1.3 on + allow_undefined_flag='-flat_namespace -undefined suppress' + ;; + esac + # FIXME: Relying on posixy $() will cause problems for + # cross-compilation, but unfortunately the echo tests do not + # yet detect zsh echo's removal of \ escapes. Also zsh mangles + # `"' quotes if we put them in here... so don't! + archive_cmds='$nonopt $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' + # We need to add '_' to the symbols in $export_symbols first + #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' + hardcode_direct=yes + hardcode_shlibpath_var=no + whole_archive_flag_spec='-all_load $convenience' + ;; + + freebsd1*) + ld_shlibs=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9* | hpux10* | hpux11*) + case $host_os in + hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; + *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; + esac + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_minus_L=yes # Not in the search PATH, but as the default + # location of the library. + export_dynamic_flag_spec='${wl}-E' + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + link_all_deplibs=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + openbsd*) + hardcode_direct=yes + hardcode_shlibpath_var=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case "$host_os" in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + + #Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + hardcode_libdir_separator=: + ;; + + sco3.2v5*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + export_dynamic_flag_spec='${wl}-Bexport' + ;; + + solaris*) + # gcc --version < 3.0 without binutils cannot create self contained + # shared libraries reliably, requiring libgcc.a to resolve some of + # the object symbols generated in some cases. Libraries that use + # assert need libgcc.a to resolve __eprintf, for example. Linking + # a copy of libgcc.a into every shared library to guarantee resolving + # such symbols causes other problems: According to Tim Van Holder + # , C++ libraries end up with a separate + # (to the application) exception stack for one thing. + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + case `$CC --version 2>/dev/null` in + [12].*) + cat <&2 + +*** Warning: Releases of GCC earlier than version 3.0 cannot reliably +*** create self contained shared libraries on Solaris systems, without +*** introducing a dependency on libgcc.a. Therefore, libtool is disabling +*** -no-undefined support, which will at least allow you to build shared +*** libraries. However, you may find that when you link such libraries +*** into an application without using GCC, you have to manually add +*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to +*** upgrade to a newer version of GCC. Another option is to rebuild your +*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. + +EOF + no_undefined_flag= + ;; + esac + fi + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + if test "x$host_vendor" = xsno; then + archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + else + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + fi + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv5*) + no_undefined_flag=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + hardcode_libdir_flag_spec= + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4.2uw2*) + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=no + hardcode_shlibpath_var=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; + + sysv5uw7* | unixware7*) + no_undefined_flag='${wl}-z ${wl}text' + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac +fi +echo "$ac_t""$ld_shlibs" 1>&6 +test "$ld_shlibs" = no && can_build_shared=no + +# Check hardcoding attributes. +echo $ac_n "checking how to hardcode library paths into programs""... $ac_c" 1>&6 +echo "configure:6696: checking how to hardcode library paths into programs" >&5 +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || \ + test -n "$runpath_var"; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$hardcode_shlibpath_var" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +echo "$ac_t""$hardcode_action" 1>&6 + +striplib= +old_striplib= +echo $ac_n "checking whether stripping libraries is possible""... $ac_c" 1>&6 +echo "configure:6724: checking whether stripping libraries is possible" >&5 +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + echo "$ac_t""yes" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +reload_cmds='$LD$reload_flag -o $output$reload_objs' +test -z "$deplibs_check_method" && deplibs_check_method=unknown + +# PORTME Fill in your ld.so characteristics +echo $ac_n "checking dynamic linker characteristics""... $ac_c" 1>&6 +echo "configure:6738: checking dynamic linker characteristics" >&5 +library_names_spec= +libname_spec='lib$name' +soname_spec= +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}.so$major' + ;; + +aix4* | aix5*) + version_type=linux + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can + # not hardcode correct soname into executable. Probably we can + # add versioning support to collect2, so additional links can + # be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}.so$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}.so' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi4*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + export_dynamic_flag_spec=-rdynamic + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + need_version=no + need_lib_prefix=no + case $GCC,$host_os in + yes,cygwin*) + library_names_spec='$libname.dll.a' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' + postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog .libs/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + ;; + yes,mingw*) + library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` + ;; + yes,pw32*) + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll' + ;; + *) + library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + # FIXME: Relying on posixy $() will cause problems for + # cross-compilation, but unfortunately the echo tests do not + # yet detect zsh echo's removal of \ escapes. + library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' + soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + *) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + dynamic_linker="$host_os dld.sl" + version_type=sunos + need_lib_prefix=no + need_version=no + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' + soname_spec='${libname}${release}.sl$major' + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) version_type=irix ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux-gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' + soname_spec='${libname}${release}.so$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case "$host_os" in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + ;; + +os2*) + libname_spec='$name' + need_lib_prefix=no + library_names_spec='$libname.dll $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_version=no + need_lib_prefix=no + soname_spec='${libname}${release}.so' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' + soname_spec='$libname.so.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +*) + dynamic_linker=no + ;; +esac +echo "$ac_t""$dynamic_linker" 1>&6 +test "$dynamic_linker" = no && can_build_shared=no + +# Report the final consequences. +echo $ac_n "checking if libtool supports shared libraries""... $ac_c" 1>&6 +echo "configure:7139: checking if libtool supports shared libraries" >&5 +echo "$ac_t""$can_build_shared" 1>&6 + +echo $ac_n "checking whether to build shared libraries""... $ac_c" 1>&6 +echo "configure:7143: checking whether to build shared libraries" >&5 +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + +aix4*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; +esac +echo "$ac_t""$enable_shared" 1>&6 + +echo $ac_n "checking whether to build static libraries""... $ac_c" 1>&6 +echo "configure:7166: checking whether to build static libraries" >&5 +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +echo "$ac_t""$enable_static" 1>&6 + +if test "$hardcode_action" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + cygwin* | mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + *) + echo $ac_n "checking for shl_load""... $ac_c" 1>&6 +echo "configure:7207: checking for shl_load" >&5 +if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_shl_load) || defined (__stub___shl_load) +choke me +#else +shl_load(); +#endif + +; return 0; } +EOF +if { (eval echo configure:7235: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_shl_load=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_shl_load=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="shl_load" +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6 +echo "configure:7253: checking for shl_load in -ldld" >&5 +ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-ldld $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for dlopen""... $ac_c" 1>&6 +echo "configure:7291: checking for dlopen" >&5 +if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_dlopen) || defined (__stub___dlopen) +choke me +#else +dlopen(); +#endif + +; return 0; } +EOF +if { (eval echo configure:7319: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_dlopen=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_dlopen=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="dlopen" +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6 +echo "configure:7337: checking for dlopen in -ldl" >&5 +ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-ldl $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6 +echo "configure:7375: checking for dlopen in -lsvld" >&5 +ac_lib_var=`echo svld'_'dlopen | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lsvld $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6 +echo "configure:7413: checking for dld_link in -ldld" >&5 +ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-ldld $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" +else + echo "$ac_t""no" 1>&6 +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6 +echo "configure:7488: checking whether a program can dlopen itself" >&5 +if eval "test \"`echo '$''{'lt_cv_dlopen_self'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +} +EOF + if { (eval echo configure:7559: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_unknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi + +echo "$ac_t""$lt_cv_dlopen_self" 1>&6 + + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6 +echo "configure:7582: checking whether a statically linked program can dlopen itself" >&5 +if eval "test \"`echo '$''{'lt_cv_dlopen_self_static'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +} +EOF + if { (eval echo configure:7653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi + +echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6 + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + +if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + echo $ac_n "checking whether -lc should be explicitly linked in""... $ac_c" 1>&6 +echo "configure:7702: checking whether -lc should be explicitly linked in" >&5 + if eval "test \"`echo '$''{'lt_cv_archive_cmds_need_lc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + $rm conftest* + echo 'static int dummy;' > conftest.$ac_ext + + if { (eval echo configure:7709: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_cv_prog_cc_wl + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { (eval echo configure:7722: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\") 1>&5; (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5; } + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi +fi + + echo "$ac_t""$lt_cv_archive_cmds_need_lc" 1>&6 + ;; + esac +fi +need_lc=${lt_cv_archive_cmds_need_lc-yes} + +# The second clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + : +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + test -f Makefile && make "$ltmain" +fi + +if test -f "$ltmain"; then + trap "$rm \"${ofile}T\"; exit 1" 1 2 15 + $rm -f "${ofile}T" + + echo creating $ofile + + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS \ + AR AR_FLAGS CC LD LN_S NM SHELL \ + reload_flag reload_cmds wl \ + pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ + thread_safe_flag_spec whole_archive_flag_spec libname_spec \ + library_names_spec soname_spec \ + RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ + old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ + postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ + old_striplib striplib file_magic_cmd export_symbols_cmds \ + deplibs_check_method allow_undefined_flag no_undefined_flag \ + finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ + global_symbol_to_c_name_address \ + hardcode_libdir_flag_spec hardcode_libdir_separator \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do + + case $var in + reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ + extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + cat <<__EOF__ > "${ofile}T" +#! $SHELL + +# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996-2000 Free Software Foundation, Inc. +# Originally by Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="sed -e s/^X//" + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + +# ### BEGIN LIBTOOL CONFIG + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$need_lc + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# The default C compiler. +CC=$lt_CC + +# Is the compiler the GNU C compiler? +with_gcc=$GCC + +# The linker used to build libraries. +LD=$lt_LD + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_wl + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_pic_flag +pic_mode=$pic_mode + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_compiler_c_o + +# Can we write directly to a .lo ? +compiler_o_lo=$lt_compiler_o_lo + +# Must we lock files when doing compilation ? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_link_static_flag + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_no_builtin_flag + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path" + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# ### END LIBTOOL CONFIG + +__EOF__ + + case $host_os in + aix3*) + cat <<\EOF >> "${ofile}T" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + esac + + case $host_os in + cygwin* | mingw* | pw32* | os2*) + cat <<'EOF' >> "${ofile}T" + # This is a source program that is used to create dlls on Windows + # Don't remove nor modify the starting and closing comments +# /* ltdll.c starts here */ +# #define WIN32_LEAN_AND_MEAN +# #include +# #undef WIN32_LEAN_AND_MEAN +# #include +# +# #ifndef __CYGWIN__ +# # ifdef __CYGWIN32__ +# # define __CYGWIN__ __CYGWIN32__ +# # endif +# #endif +# +# #ifdef __cplusplus +# extern "C" { +# #endif +# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +# #ifdef __cplusplus +# } +# #endif +# +# #ifdef __CYGWIN__ +# #include +# DECLARE_CYGWIN_DLL( DllMain ); +# #endif +# HINSTANCE __hDllInstance_base; +# +# BOOL APIENTRY +# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +# { +# __hDllInstance_base = hInst; +# return TRUE; +# } +# /* ltdll.c ends here */ + # This is a source program that is used to create import libraries + # on Windows for dlls which lack them. Don't remove nor modify the + # starting and closing comments +# /* impgen.c starts here */ +# /* Copyright (C) 1999-2000 Free Software Foundation, Inc. +# +# This file is part of GNU libtool. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# */ +# +# #include /* for printf() */ +# #include /* for open(), lseek(), read() */ +# #include /* for O_RDONLY, O_BINARY */ +# #include /* for strdup() */ +# +# /* O_BINARY isn't required (or even defined sometimes) under Unix */ +# #ifndef O_BINARY +# #define O_BINARY 0 +# #endif +# +# static unsigned int +# pe_get16 (fd, offset) +# int fd; +# int offset; +# { +# unsigned char b[2]; +# lseek (fd, offset, SEEK_SET); +# read (fd, b, 2); +# return b[0] + (b[1]<<8); +# } +# +# static unsigned int +# pe_get32 (fd, offset) +# int fd; +# int offset; +# { +# unsigned char b[4]; +# lseek (fd, offset, SEEK_SET); +# read (fd, b, 4); +# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +# } +# +# static unsigned int +# pe_as32 (ptr) +# void *ptr; +# { +# unsigned char *b = ptr; +# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +# } +# +# int +# main (argc, argv) +# int argc; +# char *argv[]; +# { +# int dll; +# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; +# unsigned long export_rva, export_size, nsections, secptr, expptr; +# unsigned long name_rvas, nexp; +# unsigned char *expdata, *erva; +# char *filename, *dll_name; +# +# filename = argv[1]; +# +# dll = open(filename, O_RDONLY|O_BINARY); +# if (dll < 1) +# return 1; +# +# dll_name = filename; +# +# for (i=0; filename[i]; i++) +# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') +# dll_name = filename + i +1; +# +# pe_header_offset = pe_get32 (dll, 0x3c); +# opthdr_ofs = pe_header_offset + 4 + 20; +# num_entries = pe_get32 (dll, opthdr_ofs + 92); +# +# if (num_entries < 1) /* no exports */ +# return 1; +# +# export_rva = pe_get32 (dll, opthdr_ofs + 96); +# export_size = pe_get32 (dll, opthdr_ofs + 100); +# nsections = pe_get16 (dll, pe_header_offset + 4 +2); +# secptr = (pe_header_offset + 4 + 20 + +# pe_get16 (dll, pe_header_offset + 4 + 16)); +# +# expptr = 0; +# for (i = 0; i < nsections; i++) +# { +# char sname[8]; +# unsigned long secptr1 = secptr + 40 * i; +# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); +# unsigned long vsize = pe_get32 (dll, secptr1 + 16); +# unsigned long fptr = pe_get32 (dll, secptr1 + 20); +# lseek(dll, secptr1, SEEK_SET); +# read(dll, sname, 8); +# if (vaddr <= export_rva && vaddr+vsize > export_rva) +# { +# expptr = fptr + (export_rva - vaddr); +# if (export_rva + export_size > vaddr + vsize) +# export_size = vsize - (export_rva - vaddr); +# break; +# } +# } +# +# expdata = (unsigned char*)malloc(export_size); +# lseek (dll, expptr, SEEK_SET); +# read (dll, expdata, export_size); +# erva = expdata - export_rva; +# +# nexp = pe_as32 (expdata+24); +# name_rvas = pe_as32 (expdata+32); +# +# printf ("EXPORTS\n"); +# for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) + + mv -f "${ofile}T" "$ofile" || \ + (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") + chmod +x "$ofile" +fi + + + # This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" +LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' -# Redirect the config.log output again, so that the ltconfig log is not -# clobbered by the next message. -exec 5>>./config.log +# Prevent multiple expansion + @@ -4682,7 +8458,7 @@ fi # Extract the first word of "sane-config", so it can be a program name with args. set dummy sane-config; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4686: checking for $ac_word" >&5 +echo "configure:8462: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_SANE_CONFIG_PATH'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4716,7 +8492,7 @@ else fi echo $ac_n "checking for sane_init in -lsane""... $ac_c" 1>&6 -echo "configure:4720: checking for sane_init in -lsane" >&5 +echo "configure:8496: checking for sane_init in -lsane" >&5 ac_lib_var=`echo sane'_'sane_init | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -4724,7 +8500,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsane $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:8515: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -4925,8 +8701,12 @@ s%@HAVE_GPHOTO2@%$HAVE_GPHOTO2%g s%@ALLOCA@%$ALLOCA%g s%@LIBOBJS@%$LIBOBJS%g s%@LINKER_RPATH@%$LINKER_RPATH%g -s%@RANLIB@%$RANLIB%g s%@LN_S@%$LN_S%g +s%@OBJEXT@%$OBJEXT%g +s%@EXEEXT@%$EXEEXT%g +s%@ECHO@%$ECHO%g +s%@RANLIB@%$RANLIB%g +s%@STRIP@%$STRIP%g s%@DLLTOOL@%$DLLTOOL%g s%@AS@%$AS%g s%@OBJDUMP@%$OBJDUMP%g diff --git a/configure.in b/configure.in index 694e496ea..64ceedfae 100644 --- a/configure.in +++ b/configure.in @@ -98,6 +98,13 @@ if test "${ac_cv_prog_gcc}" = "yes"; then fi # ac_cv_prog_gcc echo using CFLAGS=${CFLAGS} +dnl special LDFLAGS +case "${host_os}" in + aix*) #enable .so libraries, disable archives + LDFLAGS="$LDFLAGS -Wl,-brtl" + ;; +esac + dnl Checks for header files. AC_HEADER_STDC AC_CHECK_HEADERS(fcntl.h unistd.h libc.h sys/dsreq.h sys/select.h \ diff --git a/ltmain.sh b/ltmain.sh index 6f7fb17ca..dfdcccffa 100644 --- a/ltmain.sh +++ b/ltmain.sh @@ -1,7 +1,8 @@ # ltmain.sh - Provide generalized library-building support services. -# NOTE: Changing this file will not affect anything until you rerun ltconfig. +# NOTE: Changing this file will not affect anything until you rerun configure. # -# Copyright (C) 1996-1999 Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify @@ -23,24 +24,10 @@ # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. -# changes: -# 2000-07-27 by Henning Meier-Geinitz -# added underscore to sed expression (libsane-mustek_pp needs this) -# soname=`echo $soname | sed -e "s/libsane-[A-Za-z_]*/libsane/g"` -# 20.11.99 by Oliver Rauch : -# changes variable soname, from "libsane-backendname.*" to "libsane.*": -# moved 23 lines up: -# # If -module or -export-dynamic was specified, set the dlname. -# if test "$module" = yes || test "$export_dynamic" = yes; then -# # On all known operating systems, these are identical. -# dlname="$soname" -# fi -# and added direct after this: -# # added by oliver rauch: -# # must stand at this point because dlname has to be unchanged -# # removes "-backendname" from the soname of the backend libs -# soname=`echo $soname | sed -e "s/libsane-[A-Za-z]*/libsane/g"` -# +# Local changes for sane-backends (search for "Local change"): +# 2002-03-24: Henning Meier-Geinitz +# * soname changed to "libsane" for every backend (al systems but AIX) +# * fix version number for Irix # Check that we have a working $echo. if test "X$1" = X--no-reexec; then @@ -73,8 +60,8 @@ modename="$progname" # Constants. PROGRAM=ltmain.sh PACKAGE=libtool -VERSION=1.3.4 -TIMESTAMP=" (1.385.2.196 1999/12/07 21:47:57)" +VERSION=1.4.2 +TIMESTAMP=" (1.922.2.53 2001/09/11 03:18:52)" default_mode= help="Try \`$progname --help' for more information." @@ -102,11 +89,8 @@ if test "${LANG+set}" = set; then save_LANG="$LANG"; LANG=C; export LANG fi -if test "$LTCONFIG_VERSION" != "$VERSION"; then - echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 -fi +# Make sure IFS has a sensible default +: ${IFS=" "} if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then echo "$modename: not configured to build any kind of library" 1>&2 @@ -132,16 +116,16 @@ do arg="$1" shift - case "$arg" in + case $arg in -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; *) optarg= ;; esac # If the previous option needs an argument, assign it. if test -n "$prev"; then - case "$prev" in + case $prev in execute_dlfiles) - eval "$prev=\"\$$prev \$arg\"" + execute_dlfiles="$execute_dlfiles $arg" ;; *) eval "$prev=\$arg" @@ -154,7 +138,7 @@ do fi # Have we seen a non-optional argument yet? - case "$arg" in + case $arg in --help) show_help=yes ;; @@ -165,7 +149,7 @@ do ;; --config) - sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0 + sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 exit 0 ;; @@ -226,16 +210,21 @@ if test -n "$prevopt"; then exit 1 fi +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + if test -z "$show_help"; then # Infer the operation mode. if test -z "$mode"; then - case "$nonopt" in + case $nonopt in *cc | *++ | gcc* | *-gcc*) mode=link for arg do - case "$arg" in + case $arg in -c) mode=compile break @@ -280,12 +269,13 @@ if test -z "$show_help"; then help="Try \`$modename --help --mode=$mode' for more information." # These modes are in order of execution frequency so that they run quickly. - case "$mode" in + case $mode in # libtool compile mode compile) modename="$modename: compile" # Get the compilation command and the source file. base_compile= + prev= lastarg= srcfile="$nonopt" suppress_output= @@ -293,8 +283,34 @@ if test -z "$show_help"; then user_target=no for arg do + case $prev in + "") ;; + xcompiler) + # Aesthetically quote the previous argument. + prev= + lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + + case $arg in + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + + # Add the previous argument to base_compile. + if test -z "$base_compile"; then + base_compile="$lastarg" + else + base_compile="$base_compile $lastarg" + fi + continue + ;; + esac + # Accept any command-line options. - case "$arg" in + case $arg in -o) if test "$user_target" != "no"; then $echo "$modename: you cannot specify \`-o' more than once" 1>&2 @@ -307,9 +323,53 @@ if test -z "$show_help"; then build_old_libs=yes continue ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + lastarg="$lastarg $arg" + done + IFS="$save_ifs" + lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` + + # Add the arguments to base_compile. + if test -z "$base_compile"; then + base_compile="$lastarg" + else + base_compile="$base_compile $lastarg" + fi + continue + ;; esac - case "$user_target" in + case $user_target in next) # The next one is the -o target name user_target=yes @@ -335,10 +395,10 @@ if test -z "$show_help"; then lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly in scan - # sets, so we specify it separately. - case "$lastarg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + case $lastarg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") lastarg="\"$lastarg\"" ;; esac @@ -351,7 +411,7 @@ if test -z "$show_help"; then fi done - case "$user_target" in + case $user_target in set) ;; no) @@ -367,7 +427,7 @@ if test -z "$show_help"; then # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo xform='[cCFSfmso]' - case "$libobj" in + case $libobj in *.ada) xform=ada ;; *.adb) xform=adb ;; *.ads) xform=ads ;; @@ -382,7 +442,7 @@ if test -z "$show_help"; then libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` - case "$libobj" in + case $libobj in *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; *) $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 @@ -406,10 +466,21 @@ if test -z "$show_help"; then $run $rm $removelist trap "$run $rm $removelist; exit 1" 1 2 15 + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2*) + pic_mode=default + ;; + esac + if test $pic_mode = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then - output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext} + output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" removelist="$removelist $output_obj $lockfile" trap "$run $rm $removelist; exit 1" 1 2 15 @@ -421,7 +492,7 @@ if test -z "$show_help"; then # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then - until ln "$0" "$lockfile" 2>/dev/null; do + until $run ln "$0" "$lockfile" 2>/dev/null; do $show "Waiting for $lockfile to be removed" sleep 2 done @@ -453,8 +524,13 @@ compiler." # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile - # All platforms use -DPIC, to notify preprocessed assembler code. - command="$base_compile $srcfile $pic_flag -DPIC" + if test "$pic_mode" != no; then + # All platforms use -DPIC, to notify preprocessed assembler code. + command="$base_compile $srcfile $pic_flag -DPIC" + else + # Don't build PIC code + command="$base_compile $srcfile" + fi if test "$build_old_libs" = yes; then lo_libobj="$libobj" dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` @@ -525,7 +601,8 @@ compiler." fi # If we have no pic_flag, then copy the object into place and finish. - if test -z "$pic_flag" && test "$build_old_libs" = yes; then + if (test -z "$pic_flag" || test "$pic_mode" != default) && + test "$build_old_libs" = yes; then # Rename the .lo from within objdir to obj if test -f $obj; then $show $rm $obj @@ -551,6 +628,10 @@ compiler." # Now arrange that obj and lo_libobj become the same file $show "(cd $xdir && $LN_S $baseobj $libobj)" if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + $run $rm "$lockfile" + fi exit 0 else error=$? @@ -565,7 +646,13 @@ compiler." # Only build a position-dependent object if we build old libraries. if test "$build_old_libs" = yes; then - command="$base_compile $srcfile" + if test "$pic_mode" != yes; then + # Don't build PIC code + command="$base_compile $srcfile" + else + # All platforms use -DPIC, to notify preprocessed assembler code. + command="$base_compile $srcfile $pic_flag -DPIC" + fi if test "$compiler_c_o" = yes; then command="$command -o $obj" output_obj="$obj" @@ -631,17 +718,17 @@ compiler." # Unlock the critical section if it was locked if test "$need_locks" != no; then - $rm "$lockfile" + $run $rm "$lockfile" fi exit 0 ;; # libtool link mode - link) + link | relink) modename="$modename: link" - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2*) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # which system we are compiling for in order to pass an extra @@ -654,179 +741,12 @@ compiler." # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. allow_undefined=yes - - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments -# /* impgen.c starts here */ -# /* Copyright (C) 1999 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include /* for printf() */ -# #include /* for open(), lseek(), read() */ -# #include /* for O_RDONLY, O_BINARY */ -# #include /* for strdup() */ -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (!dll) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i\?\'\ \ ]*|*]*|"") + qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test + ;; + *) qarg=$arg ;; + esac + libtool_args="$libtool_args $qarg" # If the previous option needs an argument, assign it. if test -n "$prev"; then - case "$prev" in + case $prev in output) compile_command="$compile_command @OUTPUT@" finalize_command="$finalize_command @OUTPUT@" ;; esac - case "$prev" in + case $prev in dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. @@ -924,7 +845,7 @@ compiler." finalize_command="$finalize_command @SYMFILE@" preload=yes fi - case "$arg" in + case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test "$dlself" = no; then @@ -953,6 +874,7 @@ compiler." dlprefiles="$dlprefiles $arg" fi prev= + continue ;; esac ;; @@ -977,7 +899,7 @@ compiler." ;; rpath | xrpath) # We need an absolute path. - case "$arg" in + case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 @@ -998,17 +920,32 @@ compiler." prev= continue ;; + xcompiler) + compiler_flags="$compiler_flags $qarg" + prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" + continue + ;; + xlinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" + prev= + compile_command="$compile_command $wl$qarg" + finalize_command="$finalize_command $wl$qarg" + continue + ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac - fi + fi # test -n $prev prevarg="$arg" - case "$arg" in + case $arg in -all-static) if test -n "$link_static_flag"; then compile_command="$compile_command $link_static_flag" @@ -1045,7 +982,7 @@ compiler." -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: not more than one -exported-symbols argument allowed" + $echo "$modename: more than one -exported-symbols argument is not allowed" exit 1 fi if test "X$arg" = "X-export-symbols"; then @@ -1056,58 +993,76 @@ compiler." continue ;; + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix*) + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + ;; + esac + continue + ;; + -L*) dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` # We need an absolute path. - case "$dir" in + case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 - $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 - absdir="$dir" + $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 + exit 1 fi dir="$absdir" ;; esac - case " $deplibs " in - *" $arg "*) ;; - *) deplibs="$deplibs $arg";; + case "$deplibs " in + *" -L$dir "*) ;; + *) + deplibs="$deplibs -L$dir" + lib_search_path="$lib_search_path $dir" + ;; esac - case " $lib_search_path " in - *" $dir "*) ;; - *) lib_search_path="$lib_search_path $dir";; - esac - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2*) - dllsearchdir=`cd "$dir" && pwd || echo "$dir"` - case ":$dllsearchpath:" in - ::) dllsearchpath="$dllsearchdir";; - *":$dllsearchdir:"*) ;; - *) dllsearchpath="$dllsearchpath:$dllsearchdir";; + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + case :$dllsearchpath: in + *":$dir:"*) ;; + *) dllsearchpath="$dllsearchpath:$dir";; esac ;; esac + continue ;; -l*) - if test "$arg" = "-lc"; then - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*) - # These systems don't actually have c library (as such) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-pw32* | *-*-beos*) + # These systems don't actually have a C or math library (as such) continue ;; + *-*-mingw* | *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; esac - elif test "$arg" = "-lm"; then - case "$host" in - *-*-cygwin* | *-*-beos*) - # These systems don't actually have math library (as such) + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd*) + # Do not include libc_r directly, use -pthread flag. continue ;; esac fi deplibs="$deplibs $arg" + continue ;; -module) @@ -1115,6 +1070,25 @@ compiler." continue ;; + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + # The PATH hackery in wrapper scripts is required on Windows + # in order for the loader to find any dlls it needs. + $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 + $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + -no-undefined) allow_undefined=no continue @@ -1140,7 +1114,7 @@ compiler." -R*) dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` # We need an absolute path. - case "$dir" in + case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 @@ -1155,11 +1129,11 @@ compiler." ;; -static) - # If we have no pic_flag, then this is the same as -all-static. - if test -z "$pic_flag" && test -n "$link_static_flag"; then - compile_command="$compile_command $link_static_flag" - finalize_command="$finalize_command $link_static_flag" - fi + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. continue ;; @@ -1173,28 +1147,71 @@ compiler." continue ;; + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Wl,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $wl$flag" + linker_flags="$linker_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + # Some other compiler flag. -* | +*) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac ;; - *.o | *.obj | *.a | *.lib) - # A standard object. - objs="$objs $arg" - ;; - - *.lo) - # A library object. + *.lo | *.$objext) + # A library or standard object. if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - if test "$build_libtool_libs" = yes && test "$dlopen" = yes; then + # This file was specified with -dlopen. + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $arg" prev= continue else @@ -1207,300 +1224,35 @@ compiler." # Preload the old-style object. dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` prev= + else + case $arg in + *.lo) libobjs="$libobjs $arg" ;; + *) objs="$objs $arg" ;; + esac fi - libobjs="$libobjs $arg" + ;; + + *.$libext) + # An archive. + deplibs="$deplibs $arg" + old_deplibs="$old_deplibs $arg" + continue ;; *.la) # A libtool-controlled library. - dlname= - libdir= - library_names= - old_library= - - # Check to see that this really is a libtool archive. - if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2 - exit 1 - fi - - # If the library was installed with an old release of libtool, - # it will not redefine variable installed. - installed=yes - - # Read the .la file - # If there is no directory component, then add one. - case "$arg" in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac - - # Get the name of the library we link against. - linklib= - for l in $old_library $library_names; do - linklib="$l" - done - - if test -z "$linklib"; then - $echo "$modename: cannot find name of link library for \`$arg'" 1>&2 - exit 1 - fi - - # Find the relevant object directory and library name. - name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'` - - if test "X$installed" = Xyes; then - dir="$libdir" - else - dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$arg"; then - dir="$objdir" - else - dir="$dir/$objdir" - fi - fi - - if test -n "$dependency_libs"; then - # Extract -R and -L from dependency_libs - temp_deplibs= - for deplib in $dependency_libs; do - case "$deplib" in - -R*) temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'` - case " $rpath $xrpath " in - *" $temp_xrpath "*) ;; - *) xrpath="$xrpath $temp_xrpath";; - esac;; - -L*) case "$compile_command $temp_deplibs " in - *" $deplib "*) ;; - *) temp_deplibs="$temp_deplibs $deplib";; - esac - temp_dir=`$echo "X$deplib" | $Xsed -e 's/^-L//'` - case " $lib_search_path " in - *" $temp_dir "*) ;; - *) lib_search_path="$lib_search_path $temp_dir";; - esac - ;; - *) temp_deplibs="$temp_deplibs $deplib";; - esac - done - dependency_libs="$temp_deplibs" - fi - - if test -z "$libdir"; then - # It is a libtool convenience library, so add in its objects. - convenience="$convenience $dir/$old_library" - old_convenience="$old_convenience $dir/$old_library" - deplibs="$deplibs$dependency_libs" - compile_command="$compile_command $dir/$old_library$dependency_libs" - finalize_command="$finalize_command $dir/$old_library$dependency_libs" - continue - fi - - # This library was specified with -dlopen. if test "$prev" = dlfiles; then + # This library was specified with -dlopen. dlfiles="$dlfiles $arg" - if test -z "$dlname" || test "$dlopen" != yes || test "$build_libtool_libs" = no; then - # If there is no dlname, no dlopen support or we're linking statically, - # we need to preload. - prev=dlprefiles - else - # We should not create a dependency on this library, but we - # may need any libraries it requires. - compile_command="$compile_command$dependency_libs" - finalize_command="$finalize_command$dependency_libs" - prev= - continue - fi - fi - - # The library was specified with -dlpreopen. - if test "$prev" = dlprefiles; then - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - dlprefiles="$dlprefiles $dir/$old_library" - else - dlprefiles="$dlprefiles $dir/$linklib" - fi prev= - fi - - if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then - link_against_libtool_libs="$link_against_libtool_libs $arg" - if test -n "$shlibpath_var"; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath " in - *" $dir "*) ;; - *) temp_rpath="$temp_rpath $dir" ;; - esac - fi - - # We need an absolute path. - case "$dir" in - [\\/] | [A-Za-z]:[\\/]*) absdir="$dir" ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 - $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 - absdir="$dir" - fi - ;; - esac - - # This is the magic to use -rpath. - # Skip directories that are in the system default run-time - # search path, unless they have been requested with -R. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - - lib_linked=yes - case "$hardcode_action" in - immediate | unsupported) - if test "$hardcode_direct" = no; then - compile_command="$compile_command $dir/$linklib" - deplibs="$deplibs $dir/$linklib" - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2*) - dllsearchdir=`cd "$dir" && pwd || echo "$dir"` - if test -n "$dllsearchpath"; then - dllsearchpath="$dllsearchpath:$dllsearchdir" - else - dllsearchpath="$dllsearchdir" - fi - ;; - esac - elif test "$hardcode_minus_L" = no; then - case "$host" in - *-*-sunos*) - compile_shlibpath="$compile_shlibpath$dir:" - ;; - esac - case "$compile_command " in - *" -L$dir "*) ;; - *) compile_command="$compile_command -L$dir";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -L$dir -l$name" - elif test "$hardcode_shlibpath_var" = no; then - case ":$compile_shlibpath:" in - *":$dir:"*) ;; - *) compile_shlibpath="$compile_shlibpath$dir:";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -l$name" - else - lib_linked=no - fi - ;; - - relink) - if test "$hardcode_direct" = yes; then - compile_command="$compile_command $absdir/$linklib" - deplibs="$deplibs $absdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - case "$compile_command " in - *" -L$absdir "*) ;; - *) compile_command="$compile_command -L$absdir";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -L$absdir -l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case ":$compile_shlibpath:" in - *":$absdir:"*) ;; - *) compile_shlibpath="$compile_shlibpath$absdir:";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -l$name" - else - lib_linked=no - fi - ;; - - *) - lib_linked=no - ;; - esac - - if test "$lib_linked" != yes; then - $echo "$modename: configuration error: unsupported hardcode properties" - exit 1 - fi - - # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes; then - finalize_command="$finalize_command $libdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - case "$finalize_command " in - *" -L$libdir "*) ;; - *) finalize_command="$finalize_command -L$libdir";; - esac - finalize_command="$finalize_command -l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case ":$finalize_shlibpath:" in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:";; - esac - finalize_command="$finalize_command -l$name" - else - # We cannot seem to hardcode it, guess we'll fake it. - case "$finalize_command " in - *" -L$dir "*) ;; - *) finalize_command="$finalize_command -L$libdir";; - esac - finalize_command="$finalize_command -l$name" - fi + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + dlprefiles="$dlprefiles $arg" + prev= else - # Transform directly to old archives if we don't build new libraries. - if test -n "$pic_flag" && test -z "$old_library"; then - $echo "$modename: cannot find static library for \`$arg'" 1>&2 - exit 1 - fi - - # Here we assume that one of hardcode_direct or hardcode_minus_L - # is not unsupported. This is valid on all known static and - # shared platforms. - if test "$hardcode_direct" != unsupported; then - test -n "$old_library" && linklib="$old_library" - compile_command="$compile_command $dir/$linklib" - finalize_command="$finalize_command $dir/$linklib" - else - case "$compile_command " in - *" -L$dir "*) ;; - *) compile_command="$compile_command -L$dir";; - esac - compile_command="$compile_command -l$name" - case "$finalize_command " in - *" -L$dir "*) ;; - *) finalize_command="$finalize_command -L$dir";; - esac - finalize_command="$finalize_command -l$name" - fi + deplibs="$deplibs $arg" fi - - # Add in any libraries that this one depends upon. - compile_command="$compile_command$dependency_libs" - finalize_command="$finalize_command$dependency_libs" continue ;; @@ -1509,20 +1261,20 @@ compiler." # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac ;; - esac + esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" fi - done + done # argument parsing loop if test -n "$prev"; then $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 @@ -1536,28 +1288,826 @@ compiler." finalize_command="$finalize_command $arg" fi - oldlibs= # calculate the name of the file, without its directory outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` libobjs_save="$libobjs" - case "$output" in + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` + if test "X$output_objdir" = "X$output"; then + output_objdir="$objdir" + else + output_objdir="$output_objdir/$objdir" + fi + # Create the object directory. + if test ! -d $output_objdir; then + $show "$mkdir $output_objdir" + $run $mkdir $output_objdir + status=$? + if test $status -ne 0 && test ! -d $output_objdir; then + exit $status + fi + fi + + # Determine the type of output + case $output in "") $echo "$modename: you must specify an output file" 1>&2 $echo "$help" 1>&2 exit 1 ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac - *.a | *.lib) - if test -n "$link_against_libtool_libs"; then - $echo "$modename: error: cannot link libtool libraries into archives" 1>&2 - exit 1 + specialdeplibs= + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + case "$libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + libs="$libs $deplib" + done + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + case $linkmode in + lib) + passes="conv link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 + exit 1 + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + for pass in $passes; do + if test $linkmode = prog; then + # Determine which files to process + case $pass in + dlopen) + libs="$dlfiles" + save_deplibs="$deplibs" # Collect dlpreopened libraries + deplibs= + ;; + dlpreopen) libs="$dlprefiles" ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + esac fi + for deplib in $libs; do + lib= + found=no + case $deplib in + -l*) + if test $linkmode = oldlib && test $linkmode = obj; then + $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2 + continue + fi + if test $pass = conv; then + deplibs="$deplib $deplibs" + continue + fi + name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` + for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do + # Search the libtool library + lib="$searchdir/lib${name}.la" + if test -f "$lib"; then + found=yes + break + fi + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + ;; # -l + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test $pass = conv && continue + newdependency_libs="$deplib $newdependency_libs" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + ;; + prog) + if test $pass = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test $pass = scan; then + deplibs="$deplib $deplibs" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + ;; + *) + $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2 + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test $pass = link; then + dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) lib="$deplib" ;; + *.$libext) + if test $pass = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + if test "$deplibs_check_method" != pass_all; then + echo + echo "*** Warning: This library needs some functionality provided by $deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + else + echo + echo "*** Warning: Linking the shared library $output against the" + echo "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + continue + ;; + prog) + if test $pass != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + if test $found = yes || test -f "$lib"; then : + else + $echo "$modename: cannot find the library \`$lib'" 1>&2 + exit 1 + fi - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 + # Check to see that this really is a libtool archive. + if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit 1 + fi + + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + # If the library was installed with an old release of libtool, + # it will not redefine variable installed. + installed=yes + + # Read the .la file + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test $linkmode = oldlib && test $linkmode = obj; }; then + # Add dl[pre]opened files of deplib + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + fi + + if test $pass = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit 1 + fi + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $ladir/$objdir/$old_library" + old_convenience="$old_convenience $ladir/$objdir/$old_library" + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + tmp_libs="$tmp_libs $deplib" + done + elif test $linkmode != prog && test $linkmode != lib; then + $echo "$modename: \`$lib' is not a convenience library" 1>&2 + exit 1 + fi + continue + fi # $pass = conv + + # Get the name of the library we link against. + linklib= + for l in $old_library $library_names; do + linklib="$l" + done + if test -z "$linklib"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit 1 + fi + + # This library was specified with -dlopen. + if test $pass = dlopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 + exit 1 + fi + if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. + dlprefiles="$dlprefiles $lib" + else + newdlfiles="$newdlfiles $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 + $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 + abs_ladir="$ladir" + fi + ;; + esac + laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + $echo "$modename: warning: library \`$lib' was moved." 1>&2 + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$libdir" + absdir="$libdir" + fi + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + fi # $installed = yes + name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + + # This library was specified with -dlpreopen. + if test $pass = dlpreopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 + exit 1 + fi + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + newdlprefiles="$newdlprefiles $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + newdlprefiles="$newdlprefiles $dir/$dlname" + else + newdlprefiles="$newdlprefiles $dir/$linklib" + fi + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test $linkmode = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" + fi + continue + fi + + if test $linkmode = prog && test $pass != link; then + newlib_search_path="$newlib_search_path $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test + esac + # Need to link against all dependency_libs? + if test $linkalldeplibs = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + tmp_libs="$tmp_libs $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + link_static=no # Whether the deplib will be linked statically + if test -n "$library_names" && + { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + # Link against this shared library + + if test "$linkmode,$pass" = "prog,link" || + { test $linkmode = lib && test $hardcode_into_libs = yes; }; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + if test $linkmode = prog; then + # We need to hardcode the library path + if test -n "$shlibpath_var"; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath " in + *" $dir "*) ;; + *" $absdir "*) ;; + *) temp_rpath="$temp_rpath $dir" ;; + esac + fi + fi + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + realname="$2" + shift; shift + libname=`eval \\$echo \"$libname_spec\"` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin*) + major=`expr $current - $age` + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + soname=`echo $soroot | sed -e 's/^.*\///'` + newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a" + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + $show "extracting exported symbol list from \`$soname'" + save_ifs="$IFS"; IFS='~' + eval cmds=\"$extract_expsyms_cmds\" + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + $show "generating import library for \`$soname'" + save_ifs="$IFS"; IFS='~' + eval cmds=\"$old_archive_from_expsyms_cmds\" + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n $old_archive_from_expsyms_cmds + + if test $linkmode = prog || test "$mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + $echo "$modename: configuration error: unsupported hardcode properties" + exit 1 + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; + esac + fi + if test $linkmode = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && \ + test "$hardcode_minus_L" != yes && \ + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + fi + fi + fi + + if test $linkmode = prog || test "$mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + add="-l$name" + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + add="-l$name" + fi + + if test $linkmode = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test $linkmode = prog; then + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + + # Try to link the static library + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + echo + echo "*** Warning: This library needs some functionality provided by $lib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + echo "*** Therefore, libtool will create a static module, that should work " + echo "*** as long as the dlopening application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + convenience="$convenience $dir/$old_library" + old_convenience="$old_convenience $dir/$old_library" + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test $linkmode = lib; then + if test -n "$dependency_libs" && + { test $hardcode_into_libs != yes || test $build_old_libs = yes || + test $link_static = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) xrpath="$xrpath $temp_xrpath";; + esac;; + *) temp_deplibs="$temp_deplibs $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + newlib_search_path="$newlib_search_path $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + tmp_libs="$tmp_libs $deplib" + done + + if test $link_all_deplibs != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + case $deplib in + -L*) path="$deplib" ;; + *.la) + dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$deplib" && dir="." + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 + absdir="$dir" + fi + ;; + esac + if grep "^installed=no" $deplib > /dev/null; then + path="-L$absdir/$objdir" + else + eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit 1 + fi + if test "$absdir" != "$libdir"; then + $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 + fi + path="-L$absdir" + fi + ;; + *) continue ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$deplibs $path" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + if test $pass = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done fi + if test $pass != dlopen; then + test $pass != scan && dependency_libs="$newdependency_libs" + if test $pass != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) lib_search_path="$lib_search_path $dir" ;; + esac + done + newlib_search_path= + fi + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + *) + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + if test "$pass" = "conv" && + { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then + libs="$deplibs" # reset libs + deplibs= + fi + done # for pass + if test $linkmode = prog; then + dlfiles="$newdlfiles" + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 fi @@ -1585,11 +2135,12 @@ compiler." # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" + objs="$objs$old_deplibs" ;; - *.la) + lib) # Make sure we only generate libraries of the form `libNAME.la'. - case "$outputname" in + case $outputname in lib*) name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` eval libname=\"$libname_spec\" @@ -1610,26 +2161,20 @@ compiler." ;; esac - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi - if test -n "$objs"; then - $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1 - exit 1 + if test "$deplibs_check_method" != pass_all; then + $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 + exit 1 + else + echo + echo "*** Warning: Linking the shared library $output against the non-libtool" + echo "*** objects $objs is not portable!" + libobjs="$libobjs $objs" + fi fi - # How the heck are we supposed to write a wrapper for a shared library? - if test -n "$link_against_libtool_libs"; then - $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2 - exit 1 - fi - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2 + if test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 fi set dummy $rpath @@ -1647,7 +2192,6 @@ compiler." build_libtool_libs=convenience build_old_libs=yes fi - dependency_libs="$deplibs" if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 @@ -1659,7 +2203,7 @@ compiler." else # Parse the version information argument. - IFS="${IFS= }"; save_ifs="$IFS"; IFS=':' + save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 IFS="$save_ifs" @@ -1674,8 +2218,8 @@ compiler." age="$4" # Check that each of the things are valid numbers. - case "$current" in - 0 | [1-9] | [1-9][0-9]*) ;; + case $current in + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; *) $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 @@ -1683,8 +2227,8 @@ compiler." ;; esac - case "$revision" in - 0 | [1-9] | [1-9][0-9]*) ;; + case $revision in + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; *) $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 @@ -1692,8 +2236,8 @@ compiler." ;; esac - case "$age" in - 0 | [1-9] | [1-9][0-9]*) ;; + case $age in + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; *) $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 @@ -1711,12 +2255,36 @@ compiler." major= versuffix= verstring= - case "$version_type" in + case $version_type in none) ;; + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + major=.`expr $current - $age` + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + minor_current=`expr $current + 1` + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current"; + ;; + irix) + # Local change for sane-backends: old version: + # major=`expr $current - $age + 1` + # New version: major=`expr $current - $age` - versuffix="$major.$revision" + # End of local change. + verstring="sgi$major.$revision" # Add in all the interfaces that we are compatible with. @@ -1726,6 +2294,10 @@ compiler." loop=`expr $loop - 1` verstring="sgi$major.$iface:$verstring" done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" ;; linux) @@ -1755,21 +2327,11 @@ compiler." versuffix=".$current.$revision" ;; - freebsd-aout) - major=".$current" - versuffix=".$current.$revision"; - ;; - - freebsd-elf) - major=".$current" - versuffix=".$current"; - ;; - windows) - # Like Linux, but with '-' rather than '.', since we only - # want one extension on Windows 95. + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. major=`expr $current - $age` - versuffix="-$major-$age-$revision" + versuffix="-$major" ;; *) @@ -1783,6 +2345,16 @@ compiler." if test -z "$vinfo" && test -n "$release"; then major= verstring="0.0" + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring="" + ;; + *) + verstring="0.0" + ;; + esac if test "$need_version" = no; then versuffix= else @@ -1796,7 +2368,7 @@ compiler." versuffix= verstring="" fi - + # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then @@ -1808,30 +2380,12 @@ compiler." # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi - - dependency_libs="$deplibs" - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*) - # these systems don't actually have a c library (as such)! - ;; - *) - # Add libc to deplibs on all other systems. - deplibs="$deplibs -lc" - ;; - esac fi - # Create the output directory, or remove our outputs if we need to. - if test -d $output_objdir; then + if test "$mode" != relink; then + # Remove our outputs. $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* - else - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - status=$? - if test $status -ne 0 && test ! -d $output_objdir; then - exit $status - fi fi # Now set the variables for building old libraries. @@ -1842,7 +2396,73 @@ compiler." oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` fi + # Eliminate all temporary directories. + for path in $notinst_path; do + lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'` + deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'` + dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'` + done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + temp_xrpath="$temp_xrpath -R$libdir" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + if test $hardcode_into_libs != yes || test $build_old_libs = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) dlfiles="$dlfiles $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) dlprefiles="$dlprefiles $lib" ;; + esac + done + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + deplibs="$deplibs -framework System" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd*) + # Do not include libc due to us having libc/libc_r. + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test $build_libtool_need_lc = "yes"; then + deplibs="$deplibs -lc" + fi + ;; + esac + fi + # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname @@ -1857,7 +2477,7 @@ compiler." major="" newdeplibs= droppeddeps=no - case "$deplibs_check_method" in + case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check @@ -1882,7 +2502,7 @@ EOF for i in $deplibs; do name="`expr $i : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. - if test "$name" != "" ; then + if test -n "$name" && test "$name" != "0"; then libname=`eval \\$echo \"$libname_spec\"` deplib_matches=`eval \\$echo \"$library_names_spec\"` set dummy $deplib_matches @@ -1907,7 +2527,7 @@ EOF for i in $deplibs; do name="`expr $i : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. - if test "$name" != "" ; then + if test -n "$name" && test "$name" != "0"; then $rm conftest $CC -o conftest conftest.c $i # Did it work? @@ -1943,19 +2563,19 @@ EOF ;; file_magic*) set dummy $deplibs_check_method - file_magic_regex="`expr \"$deplibs_check_method\" : \"$2 \(.*\)\"`" + file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` for a_deplib in $deplibs; do name="`expr $a_deplib : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. - if test "$name" != "" ; then + if test -n "$name" && test "$name" != "0"; then libname=`eval \\$echo \"$libname_spec\"` - for i in $lib_search_path; do + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null \ | grep " -> " >/dev/null; then - continue + continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. @@ -1965,7 +2585,7 @@ EOF potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | sed 's/.* -> //'` - case "$potliblink" in + case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac @@ -1993,6 +2613,40 @@ EOF fi done # Gone through all deplibs. ;; + match_pattern*) + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + for a_deplib in $deplibs; do + name="`expr $a_deplib : '-l\(.*\)'`" + # If $name is empty we are operating on a -L argument. + if test -n "$name" && test "$name" != "0"; then + libname=`eval \\$echo \"$libname_spec\"` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + if eval echo \"$potent_lib\" 2>/dev/null \ + | sed 10q \ + | egrep "$match_pattern_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + echo "*** Warning: This library needs some functionality provided by $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + fi + else + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + fi + done # Gone through all deplibs. + ;; none | unknown | *) newdeplibs="" if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ @@ -2015,6 +2669,13 @@ EOF libname=$libname_save name=$name_save + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` + ;; + esac + if test "$droppeddeps" = yes; then if test "$module" = yes; then echo @@ -2040,6 +2701,21 @@ EOF echo "*** The inter-library dependencies that have been dropped here will be" echo "*** automatically added whenever a program is linked with this library" echo "*** or is declared to -dlopen it." + + if test $allow_undefined = no; then + echo + echo "*** Since this library must not contain undefined symbols," + echo "*** because either the platform does not support them or" + echo "*** it was explicitly requested with -no-undefined," + echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi fi fi # Done checking deplibs! @@ -2050,9 +2726,64 @@ EOF library_names= old_library= dlname= - + # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then + if test $hardcode_into_libs = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + dep_rpath="$dep_rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + # Get the real and link names of the library. eval library_names=\"$library_names_spec\" set dummy $library_names @@ -2064,6 +2795,25 @@ EOF else soname="$realname" fi + test -z "$dlname" && dlname=$soname + + # Local change for sane-backends: internal name for every lib + # is "libsane" not "libsane-backendname". So linking to each + # backend is possible. Also the following test was moved to this + # location. + # + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + case $host in + *aix*) + ;; + *) + soname=`echo $soname | sed -e "s/libsane-[A-Za-z_0-9]*/libsane/g"` + esac + # End of local change. lib="$output_objdir/$realname" for link @@ -2098,7 +2848,7 @@ EOF export_symbols="$output_objdir/$libname.exp" $run $rm $export_symbols eval cmds=\"$export_symbols_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" @@ -2135,7 +2885,7 @@ EOF for xlib in $convenience; do # Extract the objects. - case "$xlib" in + case $xlib in [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; *) xabs=`pwd`"/$xlib" ;; esac @@ -2160,19 +2910,13 @@ EOF if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" - linkopts="$linkopts $flag" + linker_flags="$linker_flags $flag" fi - # moved by oliver rauch - # If -module or -export-dynamic was specified, set the dlname. - if test "$module" = yes || test "$export_dynamic" = yes; then - # On all known operating systems, these are identical. - dlname="$soname" + # Make a backup of the uninstalled library when relinking + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? fi - # added by oliver rauch: - # must stand at this point because dlname has to be unchanged - # removes "-backendname" from the soname of the backend libs - soname=`echo $soname | sed -e "s/libsane-[A-Za-z0-9_]*/libsane/g"` # Do each of the archive commands. if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then @@ -2180,7 +2924,7 @@ EOF else eval cmds=\"$archive_cmds\" fi - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" @@ -2188,6 +2932,12 @@ EOF done IFS="$save_ifs" + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? + exit 0 + fi + # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then @@ -2195,15 +2945,11 @@ EOF $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? fi done + fi ;; - *.lo | *.o | *.obj) - if test -n "$link_against_libtool_libs"; then - $echo "$modename: error: cannot link libtool libraries into objects" 1>&2 - exit 1 - fi - + obj) if test -n "$deplibs"; then $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 fi @@ -2228,9 +2974,9 @@ EOF $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 fi - case "$output" in + case $output in *.lo) - if test -n "$objs"; then + if test -n "$objs$old_deplibs"; then $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 exit 1 fi @@ -2254,7 +3000,7 @@ EOF gentop= # reload_cmds runs $LD directly, so let us get rid of # -Wl from whole_archive_flag_spec - wl= + wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then @@ -2273,7 +3019,7 @@ EOF for xlib in $convenience; do # Extract the objects. - case "$xlib" in + case $xlib in [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; *) xabs=`pwd`"/$xlib" ;; esac @@ -2297,11 +3043,11 @@ EOF fi # Create the old-style object. - reload_objs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" + reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" eval cmds=\"$reload_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" @@ -2332,12 +3078,12 @@ EOF exit 0 fi - if test -n "$pic_flag"; then + if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" eval cmds=\"$reload_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" @@ -2368,8 +3114,10 @@ EOF exit 0 ;; - # Anything else should be a program. - *) + prog) + case $host in + *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;; + esac if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 fi @@ -2379,20 +3127,27 @@ EOF fi if test "$preload" = yes; then - if test "$dlopen" = unknown && test "$dlopen_self" = unknown && + if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && test "$dlopen_self_static" = unknown; then $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." - fi + fi fi - + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + ;; + esac + + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" + if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. - case "$compile_rpath " in - *" $libdir "*) ;; - *) compile_rpath="$compile_rpath $libdir" ;; - esac case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; @@ -2410,7 +3165,7 @@ EOF hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. - case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) @@ -2428,6 +3183,14 @@ EOF *) perm_rpath="$perm_rpath $libdir" ;; esac fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + case :$dllsearchpath: in + *":$libdir:"*) ;; + *) dllsearchpath="$dllsearchpath:$libdir";; + esac + ;; + esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && @@ -2446,7 +3209,7 @@ EOF hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. - case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) @@ -2473,23 +3236,6 @@ EOF fi finalize_rpath="$rpath" - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi - - # Create the binary in the object directory, then wrap it. - if test ! -d $output_objdir; then - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - status=$? - if test $status -ne 0 && test ! -d $output_objdir; then - exit $status - fi - fi - if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` @@ -2506,7 +3252,7 @@ EOF fi if test -n "$dlsyms"; then - case "$dlsyms" in + case $dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. @@ -2538,7 +3284,7 @@ extern \"C\" { test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. - progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` for arg in $progfiles; do $show "extracting global C symbols from \`$arg'" $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" @@ -2548,7 +3294,7 @@ extern \"C\" { $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi - + if test -n "$export_symbols_regex"; then $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' @@ -2600,27 +3346,25 @@ extern \"C\" { #undef lt_preloaded_symbols #if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * +# define lt_ptr void * #else -# define lt_ptr_t char * +# define lt_ptr char * # define const #endif /* The mapping between symbol names and symbols. */ const struct { const char *name; - lt_ptr_t address; + lt_ptr address; } lt_preloaded_symbols[] = {\ " - sed -n -e 's/^: \([^ ]*\) $/ {\"\1\", (lt_ptr_t) 0},/p' \ - -e 's/^. \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr_t) \&\2},/p' \ - < "$nlist" >> "$output_objdir/$dlsyms" + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" $echo >> "$output_objdir/$dlsyms" "\ - {0, (lt_ptr_t) 0} + {0, (lt_ptr) 0} }; /* This works around a problem in FreeBSD linker */ @@ -2637,13 +3381,13 @@ static const void *lt_preloaded_setup() { fi pic_flag_for_symtable= - case "$host" in + case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) case "$compile_command " in *" -static "*) ;; *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; @@ -2682,7 +3426,7 @@ static const void *lt_preloaded_setup() { finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` fi - if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then + if test $need_relink = no || test "$build_libtool_libs" != yes; then # Replace the output file specification. compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" @@ -2691,7 +3435,7 @@ static const void *lt_preloaded_setup() { $show "$link_command" $run eval "$link_command" status=$? - + # Delete the generated files. if test -n "$dlsyms"; then $show "$rm $output_objdir/${outputname}S.${objext}" @@ -2705,7 +3449,7 @@ static const void *lt_preloaded_setup() { # We should set the shlibpath_var rpath= for dir in $temp_rpath; do - case "$dir" in + case $dir in [\\/]* | [A-Za-z]:[\\/]*) # Absolute path. rpath="$rpath$dir:" @@ -2747,11 +3491,24 @@ static const void *lt_preloaded_setup() { fi fi + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $run $rm $output + # Link the executable and exit + $show "$link_command" + $run eval "$link_command" || exit $? + exit 0 + fi + if test "$hardcode_action" = relink; then # Fast installation is not supported link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" - + $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 $echo "$modename: \`$output' will be relinked during installation" 1>&2 else @@ -2771,7 +3528,7 @@ static const void *lt_preloaded_setup() { # Replace the output file specification. link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - + # Delete the old output files. $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname @@ -2783,12 +3540,24 @@ static const void *lt_preloaded_setup() { # Quote the relink command for shipping. if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done + relink_command="cd `pwd`; $relink_command" relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` fi # Quote $echo for shipping. if test "X$echo" = "X$SHELL $0 --fallback-echo"; then - case "$0" in + case $0 in [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; *) qecho="$SHELL `pwd`/$0 --fallback-echo";; esac @@ -2804,6 +3573,11 @@ static const void *lt_preloaded_setup() { case $output in *.exe) output=`echo $output|sed 's,.exe$,,'` ;; esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) exeext=.exe ;; + *) exeext= ;; + esac $rm $output trap "$rm $output; exit 1" 1 2 15 @@ -2833,7 +3607,7 @@ relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variable: - link_against_libtool_libs='$link_against_libtool_libs' + notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$echo are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then @@ -2866,7 +3640,7 @@ else # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in - [\\/]* | [A-Za-z]:[\\/]*) thisdir=\"\$destdir\" ;; + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi @@ -2882,9 +3656,9 @@ else if test "$fast_install" = yes; then echo >> $output "\ - program=lt-'$outputname' + program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" - + if test ! -f \"\$progdir/\$program\" || \\ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then @@ -2901,8 +3675,9 @@ else # relink executable if necessary if test -n \"\$relink_command\"; then - if (cd \"\$thisdir\" && eval \$relink_command); then : + if relink_command_output=\`eval \$relink_command 2>&1\`; then : else + $echo \"\$relink_command_output\" >&2 $rm \"\$progdir/\$file\" exit 1 fi @@ -2951,13 +3726,21 @@ else # Run the actual program with our arguments. " case $host in - *-*-cygwin* | *-*-mingw | *-*-os2*) - # win32 systems need to use the prog path for dll - # lookup to work + # win32 systems need to use the prog path for dll + # lookup to work + *-*-cygwin* | *-*-pw32*) + $echo >> $output "\ + exec \$progdir/\$program \${1+\"\$@\"} +" + ;; + + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2*) $echo >> $output "\ exec \$progdir\\\\\$program \${1+\"\$@\"} " ;; + *) $echo >> $output "\ # Export the path to the program. @@ -2999,7 +3782,7 @@ fi\ oldobjs="$libobjs_save" build_libtool_libs=no else - oldobjs="$objs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` + oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` fi addlibs="$old_convenience" fi @@ -3015,11 +3798,11 @@ fi\ exit $status fi generated="$generated $gentop" - + # Add in members from convenience archives. for xlib in $addlibs; do # Extract the objects. - case "$xlib" in + case $xlib in [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; *) xabs=`pwd`"/$xlib" ;; esac @@ -3065,7 +3848,7 @@ fi\ eval cmds=\"$old_archive_cmds\" fi - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" @@ -3080,19 +3863,26 @@ fi\ fi # Now create the libtool archive. - case "$output" in + case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" $show "creating $output" - if test -n "$xrpath"; then - temp_xrpath= - for libdir in $xrpath; do - temp_xrpath="$temp_xrpath -R$libdir" - done - dependency_libs="$temp_xrpath $dependency_libs" - fi + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args" + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` # Only create the output if not a dry run. if test -z "$run"; then @@ -3102,8 +3892,52 @@ fi\ break fi output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` + eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit 1 + fi + newdependency_libs="$newdependency_libs $libdir/$name" + ;; + *) newdependency_libs="$newdependency_libs $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + for lib in $dlfiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit 1 + fi + newdlfiles="$newdlfiles $libdir/$name" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit 1 + fi + newdlprefiles="$newdlprefiles $libdir/$name" + done + dlprefiles="$newdlprefiles" fi $rm $output + # place dlname in correct position for cygwin + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + esac $echo > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP @@ -3112,7 +3946,7 @@ fi\ # It is necessary for linking the library. # The name that we can dlopen(3). -dlname='$dlname' +dlname='$tdlname' # Names of this library. library_names='$library_names' @@ -3131,16 +3965,23 @@ revision=$revision # Is this an already installed library? installed=$installed +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + # Directory that this library needs to be installed in: -libdir='$install_libdir'\ -" +libdir='$install_libdir'" + if test "$installed" = no && test $need_relink = yes; then + $echo >> $output "\ +relink_command=\"$relink_command\"" + fi done fi # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" - $run eval "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" || exit $? + $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? ;; esac exit 0 @@ -3152,10 +3993,12 @@ libdir='$install_libdir'\ # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh; then + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then # Aesthetically quote it. arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` - case "$arg" in + case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; @@ -3171,7 +4014,7 @@ libdir='$install_libdir'\ # The real first argument should be the name of the installation program. # Aesthetically quote it. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in + case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; @@ -3194,7 +4037,7 @@ libdir='$install_libdir'\ continue fi - case "$arg" in + case $arg in -d) isdir=yes ;; -f) prev="-f" ;; -g) prev="-g" ;; @@ -3219,7 +4062,7 @@ libdir='$install_libdir'\ # Aesthetically quote the argument. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in + case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; @@ -3270,11 +4113,11 @@ libdir='$install_libdir'\ exit 1 fi fi - case "$destdir" in + case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do - case "$file" in + case $file in *.lo) ;; *) $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 @@ -3296,8 +4139,8 @@ libdir='$install_libdir'\ for file in $files; do # Do each installation. - case "$file" in - *.a | *.lib) + case $file in + *.$libext) # Do the static libraries later. staticlibs="$staticlibs $file" ;; @@ -3313,8 +4156,9 @@ libdir='$install_libdir'\ library_names= old_library= + relink_command= # If there is no directory component, then add one. - case "$file" in + case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac @@ -3333,10 +4177,20 @@ libdir='$install_libdir'\ esac fi - dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/" + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ test "X$dir" = "X$file/" && dir= dir="$dir$objdir" + if test -n "$relink_command"; then + $echo "$modename: warning: relinking \`$file'" 1>&2 + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + continue + fi + fi + # See the names of the shared library. set dummy $library_names if test -n "$2"; then @@ -3344,9 +4198,16 @@ libdir='$install_libdir'\ shift shift + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + # Install the shared library and build the symlinks. - $show "$install_prog $dir/$realname $destdir/$realname" - $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $? + $show "$install_prog $dir/$srcname $destdir/$realname" + $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? + if test -n "$stripme" && test -n "$striplib"; then + $show "$striplib $destdir/$realname" + $run eval "$striplib $destdir/$realname" || exit $? + fi if test $# -gt 0; then # Delete the old symlinks, and create new ones. @@ -3362,7 +4223,7 @@ libdir='$install_libdir'\ # Do each command in the postinstall commands. lib="$destdir/$realname" eval cmds=\"$postinstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" @@ -3393,11 +4254,11 @@ libdir='$install_libdir'\ fi # Deduce the name of the destination old-style object file. - case "$destfile" in + case $destfile in *.lo) staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` ;; - *.o | *.obj) + *.$objext) staticdest="$destfile" destfile= ;; @@ -3436,39 +4297,46 @@ libdir='$install_libdir'\ # Do a test to see if this is really a libtool program. if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - link_against_libtool_libs= + notinst_deplibs= relink_command= # If there is no directory component, then add one. - case "$file" in + case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Check the variables that should have been set. - if test -z "$link_against_libtool_libs"; then + if test -z "$notinst_deplibs"; then $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 exit 1 fi finalize=yes - for lib in $link_against_libtool_libs; do + for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then # If there is no directory component, then add one. - case "$lib" in + case $lib in */* | *\\*) . $lib ;; *) . ./$lib ;; esac fi - libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`" + libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 finalize=no fi done + relink_command= + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + outputname= if test "$fast_install" = no && test -n "$relink_command"; then if test "$finalize" = yes && test -z "$run"; then @@ -3480,6 +4348,7 @@ libdir='$install_libdir'\ $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 continue fi + file=`$echo "X$file" | $Xsed -e 's%^.*/%%'` outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` @@ -3501,6 +4370,23 @@ libdir='$install_libdir'\ fi fi + # remove .exe since cygwin /usr/bin/install will append another + # one anyways + case $install_prog,$host in + /usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + destfile=`echo $destfile | sed -e 's,.exe$,,'` + ;; + esac + ;; + esac $show "$install_prog$stripme $file $destfile" $run eval "$install_prog\$stripme \$file \$destfile" || exit $? test -n "$outputname" && ${rm}r "$tmpdir" @@ -3517,9 +4403,14 @@ libdir='$install_libdir'\ $show "$install_prog $file $oldlib" $run eval "$install_prog \$file \$oldlib" || exit $? + if test -n "$stripme" && test -n "$striplib"; then + $show "$old_striplib $oldlib" + $run eval "$old_striplib $oldlib" || exit $? + fi + # Do each command in the postinstall commands. eval cmds=\"$old_postinstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" @@ -3535,11 +4426,10 @@ libdir='$install_libdir'\ if test -n "$current_libdirs"; then # Maybe just do a dry run. test -n "$run" && current_libdirs=" -n$current_libdirs" - exec $SHELL $0 --finish$current_libdirs - exit 1 + exec_cmd='$SHELL $0 --finish$current_libdirs' + else + exit 0 fi - - exit 0 ;; # libtool finish mode @@ -3558,7 +4448,7 @@ libdir='$install_libdir'\ if test -n "$finish_cmds"; then # Do each command in the finish commands. eval cmds=\"$finish_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" @@ -3577,7 +4467,7 @@ libdir='$install_libdir'\ fi # Exit here if they wanted silent mode. - test "$show" = : && exit 0 + test "$show" = ":" && exit 0 echo "----------------------------------------------------------------------" echo "Libraries have been installed in:" @@ -3587,7 +4477,7 @@ libdir='$install_libdir'\ echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use \`-LLIBDIR'" + echo "specify the full pathname of the library, or use the \`-LLIBDIR'" echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then echo " - add LIBDIR to the \`$shlibpath_var' environment variable" @@ -3637,7 +4527,7 @@ libdir='$install_libdir'\ fi dir= - case "$file" in + case $file in *.la) # Check to see that this really is a libtool archive. if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : @@ -3652,7 +4542,7 @@ libdir='$install_libdir'\ library_names= # If there is no directory component, then add one. - case "$file" in + case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac @@ -3707,13 +4597,13 @@ libdir='$install_libdir'\ args= for file do - case "$file" in + case $file in -*) ;; *) # Do a test to see if this is really a libtool program. if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then # If there is no directory component, then add one. - case "$file" in + case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac @@ -3730,8 +4620,8 @@ libdir='$install_libdir'\ if test -z "$run"; then if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" + # Export the shlibpath_var. + eval "export $shlibpath_var" fi # Restore saved enviroment variables @@ -3742,31 +4632,35 @@ libdir='$install_libdir'\ LANG="$save_LANG"; export LANG fi - # Now actually exec the command. - eval "exec \$cmd$args" - - $echo "$modename: cannot exec \$cmd$args" - exit 1 + # Now prepare to actually exec the command. + exec_cmd='"$cmd"$args' else # Display what would be done. if test -n "$shlibpath_var"; then - eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" - $echo "export $shlibpath_var" + eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" + $echo "export $shlibpath_var" fi $echo "$cmd$args" exit 0 fi ;; - # libtool uninstall mode - uninstall) - modename="$modename: uninstall" + # libtool clean and uninstall mode + clean | uninstall) + modename="$modename: $mode" rm="$nonopt" files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" for arg do - case "$arg" in + case $arg in + -f) rm="$rm $arg"; rmforce=yes ;; -*) rm="$rm $arg" ;; *) files="$files $arg" ;; esac @@ -3778,14 +4672,42 @@ libdir='$install_libdir'\ exit 1 fi + rmdirs= + for file in $files; do dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. + if test "X$dir" = "X$file"; then + dir=. + objdir="$objdir" + else + objdir="$dir/$objdir" + fi name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + test $mode = uninstall && objdir="$dir" + + # Remember objdir for removal later, being careful to avoid duplicates + if test $mode = clean; then + case " $rmdirs " in + *" $objdir "*) ;; + *) rmdirs="$rmdirs $objdir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if (test -L "$file") >/dev/null 2>&1 \ + || (test -h "$file") >/dev/null 2>&1 \ + || test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi rmfiles="$file" - case "$name" in + case $name in *.la) # Possibly a libtool archive, so verify it. if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then @@ -3793,38 +4715,43 @@ libdir='$install_libdir'\ # Delete the libtool libraries and symlinks. for n in $library_names; do - rmfiles="$rmfiles $dir/$n" + rmfiles="$rmfiles $objdir/$n" done - test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library" + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" + test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" - $show "$rm $rmfiles" - $run $rm $rmfiles - - if test -n "$library_names"; then - # Do each command in the postuninstall commands. - eval cmds=\"$postuninstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do + if test $mode = uninstall; then + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + eval cmds=\"$postuninstall_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" + if test $? != 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - done - IFS="$save_ifs" - fi + fi - if test -n "$old_library"; then - # Do each command in the old_postuninstall commands. - eval cmds=\"$old_postuninstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + eval cmds=\"$old_postuninstall_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" + if test $? != 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - done - IFS="$save_ifs" + fi + # FIXME: should reinstall the best remaining shared library. fi - - # FIXME: should reinstall the best remaining shared library. fi ;; @@ -3833,17 +4760,35 @@ libdir='$install_libdir'\ oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` rmfiles="$rmfiles $dir/$oldobj" fi - $show "$rm $rmfiles" - $run $rm $rmfiles ;; *) - $show "$rm $rmfiles" - $run $rm $rmfiles + # Do a test to see if this is a libtool program. + if test $mode = clean && + (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + relink_command= + . $dir/$file + + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + rmfiles="$rmfiles $objdir/lt-$name" + fi + fi ;; esac + $show "$rm $rmfiles" + $run $rm $rmfiles || exit_status=1 done - exit 0 + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + $show "rmdir $dir" + $run rmdir $dir >/dev/null 2>&1 + fi + done + + exit $exit_status ;; "") @@ -3853,13 +4798,20 @@ libdir='$install_libdir'\ ;; esac - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$generic_help" 1>&2 - exit 1 + if test -z "$exec_cmd"; then + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$generic_help" 1>&2 + exit 1 + fi fi # test -z "$show_help" +if test -n "$exec_cmd"; then + eval exec $exec_cmd + exit 1 +fi + # We need to display help for each of the modes. -case "$mode" in +case $mode in "") $echo \ "Usage: $modename [OPTION]... [MODE-ARG]... @@ -3878,6 +4830,7 @@ Provide generalized library-building support services. MODE must be one of the following: + clean remove files from the build directory compile compile a source file into a libtool object execute automatically set library path, then run a program finish complete the installation of libtool libraries @@ -3890,6 +4843,20 @@ a more detailed description of MODE." exit 0 ;; +clean) + $echo \ +"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + compile) $echo \ "Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE @@ -3899,6 +4866,8 @@ Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -prefer-pic try to building PIC objects only + -prefer-non-pic try to building non-PIC objects only -static always build a \`.o' file suitable for static linking COMPILE-COMMAND is a command to be used in creating a \`standard' object file @@ -3978,6 +4947,8 @@ The following components of LINK-COMMAND are treated specially: -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -release RELEASE specify package release information