genesys: Remove vim indent settings

backend/genesys.cc

@@ -7536,5 +7536,3 @@ sane_get_select_fd(SANE_Handle handle, SANE_Int * fd)
         return sane_get_select_fd_impl(handle, fd);
     });
 }
-
-/* vim: set sw=2 cino=>2se-1sn-1s{s^-1st0(0u0 smarttab expandtab: */

backend/genesys_conv.cc

@@ -474,5 +474,3 @@ genesys_derotate (Genesys_Scanner * s)
   DBGCOMPLETED;
   return SANE_STATUS_GOOD;
 }
-
-/* vim: set sw=2 cino=>2se-1sn-1s{s^-1st0(0u0 smarttab expandtab: */

backend/genesys_gl124.cc

@@ -3647,5 +3647,3 @@ sanei_gl124_init_cmd_set (Genesys_Device * dev)
   dev->model->cmd_set = &gl124_cmd_set;
   return SANE_STATUS_GOOD;
 }
-
-/* vim: set sw=2 cino=>2se-1sn-1s{s^-1st0(0u0 smarttab expandtab: */

backend/genesys_gl124.h

@@ -395,8 +395,6 @@ typedef struct {
 static size_t order_01[]={0,1};
 static size_t order_0213[]={0,2,1,3};
 
-/* *INDENT-OFF* */
-
 /** @brief database of sensor profiles
  * database of sensor profiles giving for each sensor and a given resolution, the period, and timings
  * to setup the sensor for the scan.
@@ -463,7 +461,7 @@ static Motor_Profile motors[]={
 	{MOTOR_CANONLIDE210, 20864, 2, lide210_max},
 	{0, 0, 0, NULL},
 };
-/* *INDENT-ON* */
+
 static
 SANE_Status gl124_init_scan_regs (Genesys_Device * dev,
                                   Genesys_Register_Set * reg,
@@ -500,5 +498,3 @@ gl124_stop_action (Genesys_Device * dev);
 static SANE_Status
 gl124_send_slope_table (Genesys_Device * dev, int table_nr,
 			uint16_t * slope_table, int steps);
-
-/* vim: set sw=2 cino=>2se-1sn-1s{s^-1st0(0u0 smarttab expandtab: */

backend/genesys_gl646.cc

@@ -5083,5 +5083,3 @@ sanei_gl646_init_cmd_set (Genesys_Device * dev)
   dev->model->cmd_set = &gl646_cmd_set;
   return SANE_STATUS_GOOD;
 }
-
-/* vim: set sw=2 cino=>2se-1sn-1s{s^-1st0(0u0 smarttab expandtab: */

backend/genesys_gl646.h

@@ -347,7 +347,6 @@ static uint8_t xp200_gray[6]={0x05, 0x0a, 0x0f, 0xa0, 0x10, 0x10};
  * master sensor settings, for a given sensor and dpi,
  * it gives exposure and CCD time
  */
-/* *INDENT-OFF* */
 static Sensor_Master sensor_master[] = {
   /* HP3670 master settings */
   {CCD_HP3670,  75, SANE_TRUE ,   75,  4879,  300, 4, 42, NULL, SANE_FALSE, 0x33, 0x43},
@@ -592,4 +591,3 @@ static Sensor_Settings sensor_settings[] = {
    {0x0f, 0x13, 0x17, 0x03, 0x07, 0x0b, 0x83} /* half ccd settings */
   },
 };
-/* *INDENT-ON* */

backend/genesys_gl841.cc

@@ -5677,5 +5677,3 @@ sanei_gl841_init_cmd_set (Genesys_Device * dev)
   dev->model->cmd_set = &gl841_cmd_set;
   return SANE_STATUS_GOOD;
 }
-
-/* vim: set sw=2 cino=>2se-1sn-1s{s^-1st0(0u0 smarttab expandtab: */

backend/genesys_gl843.cc

@@ -4545,5 +4545,3 @@ sanei_gl843_init_cmd_set (Genesys_Device * dev)
   dev->model->cmd_set = &gl843_cmd_set;
   return SANE_STATUS_GOOD;
 }
-
-/* vim: set sw=2 cino=>2se-1sn-1s{s^-1st0(0u0 smarttab expandtab: */

backend/genesys_gl843.h

@@ -560,7 +560,6 @@ static uint32_t motor_speeds_cs8600f[] = {
  * database of motor profiles
  */
 
-/* *INDENT-OFF* */
 static Motor_Profile gl843_motors[]={
         /* KV-SS080 */
 	{MOTOR_KVSS080,   8000, 1, kvss080},
@@ -575,6 +574,3 @@ static Motor_Profile gl843_motors[]={
   { MOTOR_CS8600F, 0x59d8, 2, motor_speeds_cs8600f }, // FIXME: if the exposure is lower then we'll select another motor
   { 0, 0, 0, NULL },
 };
-/* *INDENT-ON* */
-
-/* vim: set sw=2 cino=>2se-1sn-1s{s^-1st0(0u0 smarttab expandtab: */

backend/genesys_gl846.cc

@@ -3379,5 +3379,3 @@ sanei_gl846_init_cmd_set (Genesys_Device * dev)
   dev->model->cmd_set = &gl846_cmd_set;
   return SANE_STATUS_GOOD;
 }
-
-/* vim: set sw=2 cino=>2se-1sn-1s{s^-1st0(0u0 smarttab expandtab: */

backend/genesys_gl846.h

@@ -476,8 +476,6 @@ typedef struct {
   uint8_t r17;		/**> TG width */
 } Sensor_Profile;
 
-/* *INDENT-OFF* */
-
 /**
  * order of the scanned pixel
  */
@@ -490,7 +488,6 @@ static Sensor_Profile sensors[]={
 	{CCD_IMG101, 1200, 11000,  60, 159, 85, 5136, 255,  0,  0,  0, order_01  , 0x13},
 	{CCD_PLUSTEK3800, 1200, 11000,  60, 159, 85, 5136, 255,  0,  0,  0, order_01  , 0x13},
 };
-/* *INDENT-ON* */
 
 /* base motor slopes in full step unit */
 /* target=((exposure * dpi) / base_dpi)>>step_type; */
@@ -500,7 +497,6 @@ static uint32_t img101_high[] = {22000, 22000, 22000, 18450, 15974, 14284, 13054
  * database of motor profiles
  */
 
-/* *INDENT-OFF* */
 static Motor_Profile gl846_motors[]={
         /* Image Formula 101 */
 	{MOTOR_IMG101,  11000, HALF_STEP , img101_high},
@@ -509,6 +505,3 @@ static Motor_Profile gl846_motors[]={
 	/* end of database entry */
 	{0,  0, 0, NULL},
 };
-/* *INDENT-ON* */
-
-/* vim: set sw=2 cino=>2se-1sn-1s{s^-1st0(0u0 smarttab expandtab: */

backend/genesys_gl847.cc

@@ -3498,5 +3498,3 @@ sanei_gl847_init_cmd_set (Genesys_Device * dev)
   dev->model->cmd_set = &gl847_cmd_set;
   return SANE_STATUS_GOOD;
 }
-
-/* vim: set sw=2 cino=>2se-1sn-1s{s^-1st0(0u0 smarttab expandtab: */

backend/genesys_gl847.h

@@ -437,8 +437,6 @@ typedef struct {
   uint8_t r17;		/**> TG width */
 } Sensor_Profile;
 
-/* *INDENT-OFF* */
-
 static size_t order_01[]={0,1};
 static size_t order_0213[]={0,2,1,3};
 static size_t order_0246[]={0,2,4,6,1,3,5,7};
@@ -474,7 +472,6 @@ static Sensor_Profile sensors[]={
 	{CIS_CANONLIDE700, 2400, 10576, 135, 249, 85, 5187, 255, 2798, 1558,  972, new_order , 0x08},
 	{CIS_CANONLIDE700, 4800, 10576, 135, 249, 85, 5187, 255, 2798, 1558,  972, order_0145, 0x06},
 };
-/* *INDENT-ON* */
 
 /* base motor sopes in full step unit */
 /* target=((exposure * dpi) / base_dpi)>>step_type; */
@@ -494,7 +491,6 @@ static uint32_t lide200_max[] = { 124992, 124992, 124992, 124992, 124992, 124992
  * database of motor profiles
  */
 
-/* *INDENT-OFF* */
 static Motor_Profile gl847_motors[]={
         /* LiDE 100 */
 	{MOTOR_CANONLIDE100,  2848, HALF_STEP   , lide200_base},
@@ -521,6 +517,3 @@ static Motor_Profile gl847_motors[]={
 	/* end of database entry */
 	{0,  0, 0, NULL},
 };
-/* *INDENT-ON* */
-
-/* vim: set sw=2 cino=>2se-1sn-1s{s^-1st0(0u0 smarttab expandtab: */