mirror
/
sane-project-backends
kopia lustrzana https://gitlab.com/sane-project/backends
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

genesys: Remove unneeded per-scanner register setup 

These register values are overwritten later.
pixma-add-canon-ts-3400-series
Povilas Kanapickas 2021-12-27 22:21:18 +02:00
rodzic f06e507de7
commit 75ac76f87a
1 zmienionych plików z 12 dodań i 36 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

48
backend/genesys/gl841.cpp
Wyświetl plik

@ -149,15 +149,6 @@ gl841_init_registers (Genesys_Device * dev)
dev->reg.init_reg(0x13, 0x00); // SENSOR_DEF
dev->reg.init_reg(0x14, 0x00); // SENSOR_DEF
dev->reg.init_reg(0x15, 0x00); // SENSOR_DEF
if (dev->model->model_id == ModelId::CANON_LIDE_80) {
dev->reg.init_reg(0x10, 0x40);
dev->reg.init_reg(0x11, 0x00);
dev->reg.init_reg(0x12, 0x40);
dev->reg.init_reg(0x13, 0x00);
dev->reg.init_reg(0x14, 0x40);
dev->reg.init_reg(0x15, 0x00);
}
dev->reg.init_reg(0x16, 0x00); // SENSOR_DEF, overwritten in scanner_setup_sensor() below
dev->reg.init_reg(0x17, 0x00); // SENSOR_DEF, overwritten in scanner_setup_sensor() below
dev->reg.init_reg(0x18, 0x00); // SENSOR_DEF, overwritten in scanner_setup_sensor() below
@ -184,36 +175,21 @@ gl841_init_registers (Genesys_Device * dev)
dev->reg.init_reg(0x27, 0x00);
dev->reg.init_reg(0x29, 0xff);
dev->reg.init_reg(0x2c, 0x00);
dev->reg.init_reg(0x2d, 0x00);
if (dev->model->model_id == ModelId::CANON_LIDE_80) {
dev->reg.init_reg(0x2c, sensor.full_resolution >> 8);
dev->reg.init_reg(0x2d, sensor.full_resolution & 0xff);
}
dev->reg.init_reg(0x2c, 0x02); // DPISET: overwritten during scanner setup
dev->reg.init_reg(0x2d, 0x58); // DPISET: overwritten during scanner setup
dev->reg.init_reg(0x2e, 0x80);
dev->reg.init_reg(0x2f, 0x80);
dev->reg.init_reg(0x30, 0x00);
dev->reg.init_reg(0x31, 0x00);
dev->reg.init_reg(0x32, 0x00);
dev->reg.init_reg(0x33, 0x00);
dev->reg.init_reg(0x34, 0x00);
dev->reg.init_reg(0x35, 0x00);
dev->reg.init_reg(0x36, 0x00);
dev->reg.init_reg(0x37, 0x00);
dev->reg.init_reg(0x38, 0x4f);
dev->reg.init_reg(0x39, 0xc1);
if (dev->model->model_id == ModelId::CANON_LIDE_80) {
dev->reg.init_reg(0x31, 0x10);
dev->reg.init_reg(0x32, 0x15);
dev->reg.init_reg(0x33, 0x0e);
dev->reg.init_reg(0x34, 0x40);
dev->reg.init_reg(0x35, 0x00);
dev->reg.init_reg(0x36, 0x2a);
dev->reg.init_reg(0x37, 0x30);
dev->reg.init_reg(0x38, 0x2a);
dev->reg.init_reg(0x39, 0xf8);
}
dev->reg.init_reg(0x30, 0x00); // STRPIXEL: overwritten during scanner setup
dev->reg.init_reg(0x31, 0x00); // STRPIXEL: overwritten during scanner setup
dev->reg.init_reg(0x32, 0x00); // ENDPIXEL: overwritten during scanner setup
dev->reg.init_reg(0x33, 0x00); // ENDPIXEL: overwritten during scanner setup
dev->reg.init_reg(0x34, 0x00); // DUMMY: overwritten during scanner setup
dev->reg.init_reg(0x35, 0x00); // MAXWD: overwritten during scanner setup
dev->reg.init_reg(0x36, 0x00); // MAXWD: overwritten during scanner setup
dev->reg.init_reg(0x37, 0x00); // MAXWD: overwritten during scanner setup
dev->reg.init_reg(0x38, 0x4f); // LPERIOD: overwritten during scanner setup
dev->reg.init_reg(0x39, 0xc1); // LPERIOD: overwritten during scanner setup
dev->reg.init_reg(0x3d, 0x00);
dev->reg.init_reg(0x3e, 0x00);