2001-01-17 Henning Meier-Geinitz <hmg@gmx.de>

* backend/mustek.c backend/mustek.desc backend/mustek.h
	  backend/mustek.CHANGES doc/sane-mustek.man:
	  Added 36 bit mode for Pro models. Removed support for "special"
	  modes, used options instead. Code cleanup. Updated manpage
	  concerning sane-find-scanner. New version: 1.0-104.
	* configure: regenerated from configure.in.

backend/mustek.CHANGES

@@ -1,5 +1,23 @@
 CHANGES for the SANE Mustek backend
 
+2001-01-17
+  * Pro: Do calibration only in Lineart, Gray and Color 24 modes.
+
+2001-01-03
+  * Added 36 bit color mode for the Paragon Pro scanners.
+
+2000-12-31
+  * Added function little_endian (from coolscan.c) to check the endianess of
+    the current architecture (needed for 16 bit frames).
+  * Added option for Gray fast
+  * Added option for bit depth (8 and 12 bits for the Pro models)
+  * Removed "special" modes from mode option
+  * Removed 48 bit options for the SE Plus. This mode seems to use only
+    interpolated information (but I may be wrong).
+
+2000-12-31
+  * Released Mustek backend 1.0-103
+  
 2000-12-30
   * Implemented calibration (color and gray mode) for the Paragon 1200 Pro.
     It's not perfect and needs lots of tests. It may work for the Paragon

backend/mustek.desc

@@ -9,7 +9,7 @@
 ;
 
 :backend "mustek"		; name of backend
-:version "1.0-103"		; version of backend
+:version "1.0-104"		; version of backend
 :status :beta			; :alpha, :beta, :stable, :new
 :manpage "sane-mustek"		; name of manpage (if it exists)
 :url "http://hmg.home.pages.de/sane/"

backend/mustek.h

@@ -97,8 +97,6 @@
 #define MUSTEK_MODE_GRAY	(1 << 1)	/* grayscale 8 bits / pixel */
 #define MUSTEK_MODE_COLOR	(1 << 2)	/* color 24 bits / pixel */
 #define MUSTEK_MODE_HALFTONE	(1 << 3)	/* use dithering */
-#define MUSTEK_MODE_GRAY_FAST   (1 << 4)        /* Pro series fast grayscale */
-#define MUSTEK_MODE_COLOR_48    (1 << 5)        /* color 48 bits / pixel */
 
 /* Color band codes: */
 #define MUSTEK_CODE_GRAY	0
@@ -158,7 +156,9 @@ enum Mustek_Option
 
     OPT_MODE_GROUP,
     OPT_MODE,
+    OPT_FAST_GRAY_MODE,
     OPT_RESOLUTION,
+    OPT_BIT_DEPTH,
     OPT_SPEED,
     OPT_SOURCE,
     OPT_PREVIEW,
@@ -241,7 +241,6 @@ typedef struct Mustek_Device
     SANE_Int firmware_format;
     /* firmware revision system: 0 = old, x.yz; 1 = new, Vxyz */
     SANE_Int firmware_revision_system;
-    /* For SE scanners: which resolutions are allowed in color mode */
   }
 Mustek_Device;
 

doc/sane-mustek.man

@@ -1,4 +1,4 @@
-.TH sane-mustek 5 "19 Nov 2000"
+.TH sane-mustek 5 "31 Dec 2000"
 .IX sane-mustek
 .SH NAME
 sane-mustek - SANE backend for Mustek flatbed scanners
@@ -97,10 +97,8 @@ SCSI scanner or the port number at which the 600 II N can
 be found (see section PARAGON 600 II N below).  For SCSI
 scanners, the special device name must be a generic SCSI device or a
 symlink to such a device.  The program 
-.IR find-scanner 
-helps to find out the correct device. It can be found in the
-.IR tools
-directory of the SANE distribution. Under Linux, such a device name
+.IR sane-find-scanner 
+helps to find out the correct device. Under Linux, such a device name
 could be
 .I /dev/sga
 or
@@ -332,7 +330,7 @@ Example:
 export SANE_DEBUG_MUSTEK=4
 
 .SH "SEE ALSO"
-sane\-scsi(5), sane-mustek_pp(5)
+sane-find-scanner(1), sane\-scsi(5), sane-mustek_pp(5)
 .SH AUTHOR
 David Mosberger, Andreas Czechanowski, Andreas Bolsch (SE extensions),
 Henning Meier-Geinitz
@@ -342,7 +340,7 @@ high resolutions and wide scanareas.
 
 Only 1, 8 and 24 bit modes are supported until now.
 
-Calibration doesn't work yet.
+Calibration doesn't work correctly for all scanners.
 
 Some scanners (e.g. Paragon 1200 A3 + Pro, SE A3) need more testing.