*** empty log message ***

ChangeLog

@@ -1,3 +1,9 @@
+2003-03-02  Michael Herder <crapsite@gmx.net>
+
+        * doc/descriptions/artec_eplus48u.desc:
+        * backend/artec_eplus48u.conf:
+          Added new model Umax AstraSlim SE
+
 2003-03-01  Henning Meier-Geinitz <henning@meier-geinitz.de>
 
 	* doc/descriptions-external/ibm.desc: Added Ricoh IS-430.

backend/artec_eplus48u.conf

@@ -1,8 +1,8 @@
 # artec_eplus48u - SANE Backend configuration file
 # For use with the Artec E+ 48U scanner
 # This scanner is also sold as
-# Tevion MD 9693, Medion MD 9705, Medion MD 9693 or
+# Tevion MD 9693, Medion MD 9705, Medion MD 9693,
-# Trust Easy Webscan 19200
+# Trust Easy Webscan 19200 or Umax AstraSlim SE.
 #
 # The USB section:
 # each device needs at least the following line:
@@ -114,3 +114,61 @@ option modelString "Easy Webscan 19200"
 
 #If you are using the scanner module (kernel driver), a device looks like this:
 #device /dev/usbscanner
+
+# Another USB section:
+# each device needs at least the following line:
+# usb vendor-ID and product-ID
+# Every device configuration in this file must begin with an usb entry.
+# Since the Umax AstraSlim SE uses a different product id, we add
+# another usb section here.
+
+usb 0x05d8 0x4009
+
+#
+# Path to the firmware file
+# This file comes with the Windows driver
+# The scanner won't work without it
+#
+
+option artecFirmwareFile <path>/Artec48.usb
+
+#
+# for adjusting the default gamma values
+#
+
+option redGamma         3.0
+option greenGamma       3.0
+option blueGamma        3.0
+option masterGamma      3.9
+
+#Use this options to set the default offset and exposure time values.
+#If calibrate device is set to 0, this values are used instead of the values
+#which were calculated during calibration.
+
+option redOffset        0x28
+option greenOffset      0x2f
+option blueOffset       0x2f
+option redExposure      0xa7
+option greenExposure    0x116
+option blueExposure     0xdc
+
+# The vendor and model string
+# This string is displayed by the frontends. The Umax AstraSlim SE
+# has a different product id, therefore we can overwrite the vendor and model
+# string here.
+
+option vendorString "Umax"
+option modelString "AstraSlim SE"
+
+#
+# device-name
+#
+# If autodetection does not work, then you can specify the device here
+# The device entry must be the last one in this config file (or the last one before a
+# new usb entry).
+
+#If you are using libusb, a device looks like this:
+#device libusb:001:002
+
+#If you are using the scanner module (kernel driver), a device looks like this:
+#device /dev/usbscanner

doc/descriptions/artec_eplus48u.desc

@@ -28,14 +28,25 @@
 
 :model "MD4394"
 :interface "USB"
+:comment "Obviously two different scanners were sold under this name. Only scanners with product id 0x4003 will work; try the gt68xx backend otherwise"
 
 :mfg "Trust"
 :url "http://www.trust-site.com"
 :model "Easy Webscan 19200"
 :interface "USB"
-:comment "Different product id: 0x4006; modify artec_eplus48u.conf, if the scanner isn't detected"
+:comment "Different product id: 0x4006"
 
 :mfg "Memorex"
 :model "Mem 48 u"
 :interface "USB"
 
+:mfg "UMAX"
+:url "http://www.umax.com/"
+:url "http://www.umax.com.tw/"
+:url "http://www.umax.de/en"
+:url "http://www.umax-europe.com"
+:url "http://www.umaxjapan.co.jp"
+:url "http://www.umax.com.cn"
+:model "AstraSlim SE"
+:interface "USB"
+:comment "Different product id: 0x4009"