mirror
/
sane-project-backends
kopia lustrzana https://gitlab.com/sane-project/backends
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

genesys: add full button support for the Canon 5600F 

This model spreads their GPIO buttons lines over 3 different registers:
0x6c, 0xa6 and 0x6d
escl-add-user-and-password
Ralph Little 2022-04-15 11:50:56 -07:00
rodzic 785a935e9e
commit 602b4f8d3d
2 zmienionych plików z 41 dodań i 18 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

54
backend/genesys/gl847.cpp
Wyświetl plik

@ -1089,26 +1089,46 @@ void CommandSetGl847::update_hardware_sensors(Genesys_Scanner* s) const
/* do what is needed to get a new set of events, but try to not lose
any of them.
*/
std::uint8_t scan, file, email, copy;
std::uint8_t val;
switch(s->dev->model->gpio_id) {
case GpioId::CANON_LIDE_700F:
scan=0x04;
file=0x02;
email=0x01;
copy=0x08;
break;
default:
scan=0x01;
file=0x02;
email=0x04;
copy=0x08;
}
std::uint8_t val = s->dev->interface->read_register(REG_0x6D);
val = s->dev->interface->read_register(REG_0x6D);
DBG(DBG_io, "%s: read buttons_gpio value=0x%x\n", __func__, (int)val);
s->buttons[BUTTON_SCAN_SW].write((val & scan) == 0);
s->buttons[BUTTON_FILE_SW].write((val & file) == 0);
s->buttons[BUTTON_EMAIL_SW].write((val & email) == 0);
s->buttons[BUTTON_COPY_SW].write((val & copy) == 0);
s->buttons[BUTTON_SCAN_SW].write((val & 0x04) == 0);
s->buttons[BUTTON_FILE_SW].write((val & 0x02) == 0);
s->buttons[BUTTON_EMAIL_SW].write((val & 0x01) == 0);
s->buttons[BUTTON_COPY_SW].write((val & 0x08) == 0);
break;
case GpioId::CANON_5600F:
val = s->dev->interface->read_register(REG_0x6D);
DBG(DBG_io, "%s: read buttons_gpio 0x6d value=0x%x\n", __func__, (int)val);
s->buttons[BUTTON_SCAN_SW].write((val & 0x02) == 0);
s->buttons[BUTTON_EMAIL_SW].write((val & 0x01) == 0);
s->buttons[BUTTON_COPY_SW].write((val & 0x08) == 0);
s->buttons[BUTTON_PDF4_SW].write((val & 0x04) == 0);
val = s->dev->interface->read_register(REG_0xA6);
DBG(DBG_io, "%s: read buttons_gpio 0xa6 value=0x%x\n", __func__, (int)val);
s->buttons[BUTTON_PDF1_SW].write((val & 0x03) == 0x01);
s->buttons[BUTTON_PDF2_SW].write((val & 0x03) == 0x02);
val = s->dev->interface->read_register(REG_0x6C);
DBG(DBG_io, "%s: read buttons_gpio 0x6c value=0x%x\n", __func__, (int)val);
s->buttons[BUTTON_PDF3_SW].write((val & 0x80) == 0x00);
break;
default:
val = s->dev->interface->read_register(REG_0x6D);
DBG(DBG_io, "%s: read buttons_gpio value=0x%x\n", __func__, (int)val);
s->buttons[BUTTON_SCAN_SW].write((val & 0x01) == 0);
s->buttons[BUTTON_FILE_SW].write((val & 0x02) == 0);
s->buttons[BUTTON_EMAIL_SW].write((val & 0x04) == 0);
s->buttons[BUTTON_COPY_SW].write((val & 0x08) == 0);
break;
}
}
void CommandSetGl847::update_home_sensor_gpio(Genesys_Device& dev) const

5
backend/genesys/tables_model.cpp
Wyświetl plik

@ -929,7 +929,10 @@ void genesys_init_usb_device_tables()
model.buttons = GENESYS_HAS_SCAN_SW |
GENESYS_HAS_COPY_SW |
GENESYS_HAS_EMAIL_SW |
GENESYS_HAS_FILE_SW;
GENESYS_HAS_PDF1_SW |
GENESYS_HAS_PDF2_SW |
GENESYS_HAS_PDF3_SW |
GENESYS_HAS_PDF4_SW;
model.search_lines = 400;
s_usb_devices->emplace_back(0x04a9, 0x1906, model);