Add test for gphoto2 binary used by gphoto2 backend

acinclude.m4

@@ -7,6 +7,7 @@ dnl   SANE_CHECK_JPEG
 dnl   JAPHAR_GREP_CFLAGS(flag, cmd_if_missing, cmd_if_present)
 dnl   SANE_LINKER_RPATH
 dnl   SANE_CHECK_U_TYPES
+dnl   SANE_CHECK_GPHOTO2
 dnl
 
 #
@@ -94,7 +95,8 @@ AC_DEFUN(SANE_CHECK_PTAL,
 ])
 
 #
-# Checks for jpeg library >= v6B (61), needed for DC210 and DC240 backends.
+# Checks for jpeg library >= v6B (61), needed for DC210,  DC240, and 
+# GPHOTO2 backends.
 AC_DEFUN(SANE_CHECK_JPEG,
 [
   AC_CHECK_LIB(jpeg,jpeg_start_decompress, 
@@ -186,3 +188,11 @@ AC_CHECK_TYPE(u_char, unsigned char)
 AC_CHECK_TYPE(u_int, unsigned int)
 AC_CHECK_TYPE(u_long, unsigned long)
 ])
+
+#
+# Checks for gphoto2 - needed by the gphoto2 backend.
+AC_DEFUN(SANE_CHECK_GPHOTO2,
+[
+  AC_CHECK_PROG(GPHOTO2_BIN, gphoto2, gphoto2)
+])
+

aclocal.m4

@@ -106,7 +106,8 @@ AC_DEFUN(SANE_CHECK_PTAL,
 ])
 
 #
-# Checks for jpeg library >= v6B (61), needed for DC210 and DC240 backends.
+# Checks for jpeg library >= v6B (61), needed for DC210,  DC240, and 
+# GPHOTO2 backends.
 AC_DEFUN(SANE_CHECK_JPEG,
 [
   AC_CHECK_LIB(jpeg,jpeg_start_decompress, 
@@ -199,6 +200,14 @@ AC_CHECK_TYPE(u_int, unsigned int)
 AC_CHECK_TYPE(u_long, unsigned long)
 ])
 
+#
+# Checks for gphoto2 - needed by the gphoto2 backend.
+AC_DEFUN(SANE_CHECK_GPHOTO2,
+[
+  AC_CHECK_PROG(GPHOTO2_BIN, gphoto2, gphoto2)
+])
+
+
 
 # serial 40 AC_PROG_LIBTOOL
 AC_DEFUN(AC_PROG_LIBTOOL,
@@ -213,7 +222,7 @@ LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
 LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
 DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
 || AC_MSG_ERROR([libtool configure failed])
 
 # Reload cache, that may have been modified by ltconfig
@@ -245,8 +254,18 @@ AC_REQUIRE([AC_PROG_NM])dnl
 AC_REQUIRE([AC_PROG_LN_S])dnl
 dnl
 
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
 # Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
+#
+# the following will cause an existing older ltconfig to fail, so
+# we ignore this at the expense of the cache file... Checking this 
+# will just take longer ... bummer!
+#libtool_flags="--cache-file=$cache_file"
+#
 test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
 test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
 test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
@@ -263,7 +282,7 @@ test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
 
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
-case "$host" in
+case "$lt_target" in
 *-*-irix6*)
   # Find out which ABI we are using.
   echo '[#]line __oline__ "configure"' > conftest.$ac_ext
@@ -288,10 +307,7 @@ case "$host" in
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_SAVE
-     AC_LANG_C
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_RESTORE])
+    [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
   if test x"$lt_cv_cc_needs_belf" != x"yes"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
     CFLAGS="$SAVE_CFLAGS"
@@ -482,7 +498,6 @@ else
   AC_MSG_RESULT(no)
 fi
 test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
 AC_PROG_LD_GNU
 ])
 
@@ -528,14 +543,13 @@ else
 fi])
 NM="$ac_cv_path_NM"
 AC_MSG_RESULT([$NM])
-AC_SUBST(NM)
 ])
 
 # AC_CHECK_LIBM - check for math library
 AC_DEFUN(AC_CHECK_LIBM,
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 LIBM=
-case "$host" in
+case "$lt_target" in
 *-*-beos* | *-*-cygwin*)
   # These system don't have libm
   ;;
@@ -550,31 +564,35 @@ esac
 ])
 
 # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library, adds --enable-ltdl-convenience to
-# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
+# the libltdl convenience library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-convenience to the
+# configure arguments.  Note that LIBLTDL and INCLTDL are not
+# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
+# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
+# with '${top_builddir}/' and INCLTDL will be prefixed with
+# '${top_srcdir}/' (note the single quotes!).  If your package is not
+# flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
 AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
   case "$enable_ltdl_convenience" in
   no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
   "") enable_ltdl_convenience=yes
       ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
   esac
-  LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
-  INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
 ])
 
 # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library, and adds --enable-ltdl-install to
-# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
+# the libltdl installable library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-install to the configure
+# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
+# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
+# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
+# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
+# with '${top_srcdir}/' (note the single quotes!).  If your package is
+# not flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
 # In the future, this macro may have to be called after AC_PROG_LIBTOOL.
 AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
   AC_CHECK_LIB(ltdl, main,
@@ -587,8 +605,8 @@ AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
   ])
   if test x"$enable_ltdl_install" = x"yes"; then
     ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
-    INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
   else
     ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
     LIBLTDL="-lltdl"